LG 24LN4130-TD, 24LN4130 Owner’s Manual

OWNER’S MANUAL

LED TV

*LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

LN41**

LN405*

P/NO : MFL67782403 (1302-REV00)	www.lg.com
Printed in Korea

<![if ! IE]>

<![endif]>ENGLISH

2TABLE OF CONTENTS

TABLE OF CONTENTS

3SAFETY INSTRUCTIONS

8INSTALLATION PROCEDURE

8ASSEMBLING AND PREPARING

8Unpacking

11Parts and buttons

12Lifting and moving the TV

13Setting up the TV

13- Attaching the Stand Base

13- Detaching the Stand Base

14Mounting on a table

15Mounting on a wall

16Tidying cables

17MAKING CONNECTIONS

17Antenna connection

18Adapter connection

18HDMI connection

19Component connection

19Composite connection

20Audio System connection

20- External Stereo Connection

20USB connection

21REMOTE CONTROL

22WATCHING TV

22Turning the TV on for the first time

22Watching TV

22Managing programmes

22- Automatically setting up programme

23- Manually setting up programme

24- Editing your programme list

24- Selecting a programme on the programme list

24Using additional options

24- Adjusting aspect ratio

25- Using the input list

26ENTERTAINMENT

26Connecting USB storage devices

27Browsing files

28Viewing photos

29Listening to music

30Viewing movies

32 DivX® VOD Guide

33 CUSTOMIZING TV SETTING

33Accessing main menus

33Customizing Settings

33- SETUP Settings

34- PICTURE Settings

36- AUDIO Settings

37- TIME Settings

38- OPTION Settings

38- LOCK Settings

39 TELETEXT

39 Switch On/Off

39 Simple Text

39 - Page selection

39- Programming a colour button in LIST mode

39	Fastext
39	- Page selection

39Special Teletext Function

40MAINTENANCE

40 Cleaning your TV

40 - Screen, frame, cabinet and stand

40 - Power cord

40TROUBLESHOOTING

41SPECIFICATIONS

45 LICENSES

WARNING

yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

yy If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

yy The note helps you understand and use the product safely. Please read the note carefully before using the product.

SAFETY INSTRUCTIONS

3

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

yyDo not place the TV and/ or remote control in the following environments: --A location exposed to

direct sunlight

--An area with high humidity such as a bathroom

--Near any heat source such as stoves and other devices that produce heat

--Near kitchen counters or humidifiers where they can easily be exposed to steam or oil

--An area exposed to rain or wind

--Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

yyDo not place the product where it might be exposed to dust.

This may cause a fire hazard.

yyMains Plug is the TV connecting/disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.

yyDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

yyMake sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.

yyInsert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.

yyEnsure the power cord does not come into contact with hot objects such as a heater.

This may cause a fire or an electric shock hazard.

yyDo not place a heavy object, or the product itself, on power cables.

Otherwise, this may result in fire or electric shock.

yyBend antenna cable between inside and outside building to prevent rain from flowing in.

This may cause water damaged inside the Product and could give an electric shock.

yyWhen mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock / fire hazard.

yyDo not plug too many electrical devices into a single multiple electrical outlet.

Otherwise, this may result in fire due to over-heating.

yyDo not drop the product or let it fall over when

connecting external devices.

Otherwise, this may result in injury or damage to the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4SAFETY INSTRUCTIONS

yyKeep the anti-moisture packing material or vinyl packing out of the reach of children.

Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital.

Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yyDo not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

yyDispose of used batteries carefully to ensure that a small child does not consume them.

Please seek DoctorMedical

Attention immediately if child consumes batteries.

yyDo not insert any metal objects/conductors (like a metal chopstick/cutlery/

screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.

You may be electrocuted. (Depending on model)

yyDo not put or store inflammable substances near the product. There is a danger of combustion/ explosion or fire due to careless handling of the inflammable substances.

yyDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.

Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

yyDo not spray water on the product or scrub with an inflammable substance

(thinner or benzene). Fire or electric shock accident can occur.

yyDo not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.

You may be injured or the product can be damaged.

yyNever touch this product or antenna during a thunder or lighting storm.

You may be electrocuted.

yyNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.

It may cause a fire or a burn by a spark.

yyDo not disassemble, repair or modify the product at your own discretion.

Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair.

yyIf any of the following occur, unplug the product immediately and contact your local service centre.

--The product has been impacted by shock --The product has been

damaged

--Foreign objects have entered the product --The product produced

smoke or a strange smell

This may result in fire or electric shock.

	SAFETY INSTRUCTIONS	5
yyUnplug the TV from AC	yyWhen installing the antenna,
mains wall socket if you do	consult with a qualified
not intend to use the TV	service technician. If not
for a long period of time.	installed by a qualified
Accumulated dust can cause	technician, this may create
fire hazard and insulation	a fire hazard or an electric
deterioration can cause	shock hazard.
electric leakage/shock/fire.	yyWe recommend that you
yyApparatus shall not be	maintain a distance of
exposed to dripping or	at least 2 to 7 times the
splashing and no objects	diagonal screen size when
filled with liquids, such as	watching TV.
vases, shall be placed on	If you watch TV for a long
the apparatus.	period of time, this may
	cause blurred vision.
	yyOnly use the specified type
	of battery.
CAUTION	This could cause damage to
	the remote control.
yyInstall the product where no	yyDo not mix new batteries
radio wave occurs.
	with old batteries.
	This may cause the batteries
yyThere should be enough	to overheat and leak.
	yyBatteries should not be exposed to excessive
distance between an outside
	heat. For example, keep away from direct
antenna and power lines
	Sunlight , open fireplace and electric heaters.
to keep the former from
	yyDo not place non-rechargeable batteries in
touching the latter even
	charging device.
when the antenna falls.
	yyMake sure there are no
This may cause an electric
shock.	objects between the remote
yyDo not install the product	control and its sensor.
on places such as unstable
shelves or inclined surfaces.	yySignal from Remote Control
Also avoid places where	can be interrupted due to
there is vibration or where	external/internal lighting eg
the product cannot be fully	Sunlight, fluorescent lighting.
supported.	If this occurs turn off lighting
Otherwise, the product may	or darken viewing area.
fall or flip over, which may	yyWhen connecting external
cause injury or damage to
	devices such as video game
the product.
	consoles, make sure the
yyIf you install the TV on a
	connecting cables are long
stand, you need to take	enough.
actions to prevent the	Otherwise, the product
product from overturning.	may fall over, which may
Otherwise, the product may	cause injury or damage the
fall over, which may cause	product.
injury.	yyDo not turn the product
yyIf you intend to mount the product to a wall,
	On/Off by plugging-in or
attach VESA standard mounting interface	unplugging the power plug to
(optional parts) to the back of the product. When	the wall outlet. (Do not use
you install the set to use the wall mounting	the power plug for switch.)
bracket (optional parts), fix it carefully so as not	It may cause mechanical
to drop.	failure or could give an
yyOnly use the attachments / accessories	electric shock.
specified by the manufacturer.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6SAFETY INSTRUCTIONS

	yyPlease follow the installation	yyAvoid touching the screen or
	instructions below to	holding your finger(s) against
	prevent the product from	it for long periods of time.
	overheating.	Doing so may produce some
	--The distance between the	temporary or permanent
	product and the wall should	distortion/damage to screen.
	be more than 10 cm.	yyWhen cleaning the product
	--Do not install the product in
		and its components, unplug
	a place with no ventilation
		the power first and wipe it
	(e.g., on a bookshelf or in
		with a soft cloth. Applying
	a cupboard).
		excessive force may cause
	--Do not install the product
		scratches or discolouration.
	on a carpet or cushion.
		Do not spray with water or
	--Make sure the air vent is
		wipe with a wet cloth. Never
	not blocked by a tablecloth
		use glass cleaner, car or
	or curtain.
		industrial shiner, abrasives
	Otherwise, this may result in
		or wax, benzene, alcohol
	fire.
		etc., which can damage the
	yyTake care not to touch the	product and its panel.
	ventilation openings when	Otherwise, this may result in
	watching the TV for long	fire, electric shock or product
	periods as the ventilation	damage (deformation,
	openings may become hot.	corrosion or breakage).
	This does not affect the	yyAs long as this unit is connected to the AC wall
	operation or performance of	outlet, it is not disconnected from the AC power
	the product.	source even if you turn off this unit by SWITCH.
	yyPeriodically examine the cord of your appliance,	yyWhen unplugging the cable,
	and if its appearance indicates damage or	grab the plug and unplug it,
	deterioration, unplug it, discontinue use of the	by pulling at the plug. Don’t
	appliance, and have the cord replaced with	pull at the cord to unplug the
	an exact replacement part by an authorized	power cord from the power
	servicer.	board, as this could be
	yyPrevent dust collecting on	hazardous.
	the power plug pins or outlet.	yyWhen moving the product,
	This may cause a fire	make sure you turn the
	hazard.	power off first. Then, unplug
	yyProtect the power cord from	the power cables, antenna
		cables and all connecting
	physical or mechanical
		cables.
	abuse, such as being
		The TV set or power cord
	twisted, kinked, pinched,
		may be damaged, which
	closed in a door, or walked
		may create a fire hazard or
	upon. Pay particular
		cause electric shock.
	attention to plugs, wall
		yyWhen moving or unpacking
	outlets, and the point where
	the cord exits the appliance.	the product, work in pairs
	yyDo not press strongly upon	because the product is
		heavy.
	the panel with a hand or
		Otherwise, this may result in
	sharp object such as nail,
		injury.
	pencil or pen, or make a
	scratch on it, as it may
	cause damage to screen.

SAFETY INSTRUCTIONS

7

yyContact the service centre once a year to clean the internal parts of the product.

Accumulated dust can cause mechanical failure.

yyRefer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

yyThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/ or brightly coloured dots

(red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yyYou may find different brightness and colour of the panel depending on your viewing position(left/right/ top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.

yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking.

The warranty does not cover the product for image sticking.

Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for

Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yyGenerated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount

of current to operate a product. It varies depending on the product.

This generated sound does not affect the performance and reliability of the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

8INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

yy Image shown may differ from your TV.

yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yy The available menus and options may differ from the input source or product model that you are using.

yy New features may be added to this TV in the future.

yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.

yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2Attach the stand to the TV set.

3Connect an external device to the TV set.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yy Do not use any unapproved items to ensure the safety and product life span.

yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.

yy Some models have a thin film attached on to the screen and this must not be removed.

NOTE

yy The items supplied with your product may vary depending on the model.

yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

	B	B
		<	10 mm
		*A =
		<	18 mm
A		*B =
		A

ASSEMBLING AND PREPARING

9

<![if ! IE]>

<![endif]>ENGLISH

Remote control and

Owner’s manual

Cable Tie

Stand Base

batteries (AAA)

(Depending on model)

(See p.13)

(See p.21)

(See p.16)

			or
		or
Power Cord	AC-DC Adapter	AC-DC Adapter	Isolator
(Depending on model)	(Depending on model)	(Depending on model)	(Depending on model)
(See p.18)	(See p.18)	(See p.18)	(See p.10)

<![if ! IE]>

<![endif]>ENGLISH

10 ASSEMBLING AND PREPARING

NOTE

yy Antenna Isolator Installation Guide

-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.

»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.

-- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

-- Before starting, be sure that the TV antenna is connected.

1. Connect to TV.

Wall
ANTENNA/	or

Cable / Antenna

Isolator

2. Connect to Set-Top box.

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

ASSEMBLING AND PREPARING

11

Parts and buttons

Screen

Remote control Sensor

Speakers

		OK	SETTINGS INPUT
			Touch buttons1
Touch Buttons			Description
		Scrolls through the saved programmes.
		Adjusts the volume level.
OK		Selects the highlighted menu option or confirms an input.
SETTINGS		Accesses the main menu, or saves your input and exits the menus.
INPUT		Changes the input source.
/ I		Turns the power on or off.

1All of the buttons are touch sensitive and can be operated through simple touch with your finger.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

12 ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

yy When transporting a large TV, there should be at least 2 people.

yy When transporting the TV by hand, hold the TV as shown in the following illustration.

CAUTION

yy Avoid touching the screen at all times, as this may result in damage to the screen.

yy It is recommended to move the TV in the box or packing material that the TV originally came in.

yy Before moving or lifting the TV, disconnect the power cord and all cables.

yy When holding the TV, the screen should face away from you to avoid damage.

yy When transporting the TV, do not expose the TV to jolts or excessive vibration.

yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

yy Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen.

yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

ASSEMBLING AND PREPARING

13

Setting up the TV

Image shown may differ from your TV.

Attaching the Stand Base

1

Stand Base

2

Detaching the Stand Base

1

Stand Base

NOTE

yy When Detaching the stand from TV, Detach the stand with lifting up the lever in the direction of the arrow.

2

<![if ! IE]>

<![endif]>ENGLISH

CAUTION

yy Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

CAUTION

yy Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

yy When Detaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

14 ASSEMBLING AND PREPARING

	<![if ! IE]> <![endif]>ENGLISH	Mounting on a table
		1 Lift and tilt the TV into its upright position on a table.
		- - Leave a 10 cm (minimum) space from the wall
		for proper ventilation.

		10 cm
		cm
	10 cm	10
		10 cm

2Connect the AC-DC Adapter and Power Cord to a wall outlet.

CAUTION

yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.

Securing the TV to a wall

(This feature is not available for all models.)

1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

-- If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eyebolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

CAUTION

yy Make sure that children do not climb on or hang on the TV.

NOTE

yy Use a platform or cabinet that is strong and large enough to support the TV securely.

yy Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

WARNING

yy If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

»» Using cabinets or stands recommended by the manufacturer of the television.

»» Only using furniture that can safely support the television.

»» Ensuring the television is not overhanging the edge of the supporting furniture.

»» Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.

»» Not standing the televisions on cloth or other materials placed between the television and supporting furniture.

»» Educating children about the dangers of climbing on furniture to reach the television or its controls.