LG 24MB35DM-B User Manual

0 (0)

ENGLISH

OWNER’S MANUAL

IPS LED MONITOR (LED LCD MONITOR)

Please read this manual carefully before operating your set and retain it for future reference.

IPS LED(LED LCD) MONITOR MODEL

19MB35DM

22MB35DM

24MB35DM

www.lg.com

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

ENGLISH

2 TABLE OF CONTENTS

3	ASSEMBLING AND PREPAR-	21	SPECIFICATIONS
	ING
	ING	21	19MB35DM
3	Unpacking	21	19MB35DM
3	Unpacking	22	22MB35DM
4	Parts and buttons	23	24MB35DM
5	Setting up the Monitor set	24	Preset Modes (Resolution)
5	- Attaching the Stand Base	24	Indicator

5- Detaching the Stand Base

6	- Mounting on a table	25	PROPER POSTURE
7	- Using the Kensington locking device
		25	Proper posture for using the Monitor set.
8	- Mounting on a wall

9USING THE MONITOR SET

9Connecting to a PC

9- D-SUB connection

9- DVI-D connection

10- Peripheral device connection

11CUSTOMIZING SETTINGS

12Customizing Settings

12- Menu Settings

13-Picture

14-Color

15-Display

16-Others

17READER Setting

18-SUPER ENERGY SAVING

19TROUBLESHOOTING

ASSEMBLING AND PREPARING 3

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

ENGLISH

CD(Owner's Manual) /

Card

Power Cord

Stand Body

CAUTION

D-SUB Cable

(This cable is not included in all countries.)

DVI-D Cable

(This cable is not included in all countries.)

Audio Cable

( Depending on the country )

Stand Base

yyDo not use any unapproved accessories to ensure the safety and product life span.

yyAny damages or injuries by using unapproved accessories are not covered by the warranty.

NOTE

yyThe accessories supplied with your product may vary depending on the model.

yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

4 ASSEMBLING AND PREPARING

Parts and buttons

ENGLISH

Power Indicator yyLED On : Power is on yyLED Off: Power is off

(Power Button)

Front Side Buttons

Input Connectors (See p. to 10)

ASSEMBLING AND PREPARING 5

Setting up the Monitor set

Attaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

21 Attach the Stand Body to the monitor set.

2 Attach the Stand Base.

3 Tie down the base lock to perpendicularity direction.

Stand Body

Stand Base

Detaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

21 Pushing the PUSH button, Take the Stand Body from the monitor set.

2Change your lock on the product as it follows and turnit in the arrow direction.

3 Pull out the Stand Base.

Stand Body

Stand Base

CAUTION

yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

CAUTION

yyIf you can't release the stand base even the locking knob is at a release position, Please push the indicated knob down and retry it.

ENGLISH

6 ASSEMBLING AND PREPARING

Mounting on a table

1Lift the monitor and place it on the table in an upright position.

Install at least 10 cm away from the wall to ensure sufficient ventilation.

10 cm

WARNING

When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.

Do not touch or press the screen when adjusting the angle of the monitor.

2Connect the Power cord to the monitor, then plug the power cord into the wall outlet.

Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.

NOTE

Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

3 Press the (Power) button on the front of the monitor to turn on the monitor.

CAUTION

yyUnplug the power cord prior to moving or installing the monitor. There is risk of electric shock.

Front Rear

Using the Kensington locking device

The connector for the Kensington lock is located on the rear of the monitor.

For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com.

Connect the monitor to the table with the Kensington lock cable.

NOTE

yyUsing the Kensington lock is optional. The accessories can be purchased at your local electronics store.

ASSEMBLING AND PREPARING 7

ENGLISH

8 ASSEMBLING AND PREPARING

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1Please, Use the screw and wall mount interface in accordance with VESA Standards.

2If you use screw longer than standard, the monitor might be damaged internally.

3If you use improper screw, the product might be damaged and drop from mounted position. In

this case, LG Electronics is not responsible for it.

4 VESA compatible.

5 Please use VESA standard as below. yy784.8 mm (30.9 inch) and under

*Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm

yy787.4 mm (31.0 inch) and above

*Please use VESA standard wall mount pad and screws.

Modeli	19MB35DM	22MB35DM
		24MB35DM
VESA (A x B)	75 x 75	100 x 100
Vidë standarde	M4	M4
Numri i vidave	4	4

CAUTION

yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit will include an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

+ 18 hidden pages