Konica Minolta Bizhub c554e, Bizhub c364e, Bizhub c454e, Bizhub c224e, Bizhub c284e Installation Manual

E-1

INSTALLATION MANUAL

////

A5C1-9620-12

<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.

I. Outline of installation procedures (C554e/C454e)

When installing the machine and associated options as a system, follow the order shown on the upper.

Caution:

• For the detailed installation procedures for each
option, follow the instructions given in the corre­sponding installation manual and perform the
procedures correctly. (Optional devices must be
installed after completing the main unit installa­tion.)

• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.

• When placing the machine on the floor, make
sure to use the paper feed cabinet or the desk
to secure the performance and the quality of
the product.

• Lifting the machine in an awkward position or
transporting it in a poorly balanced position

could result in personal injury. When transport­ing the machine, assign an adequate number of
persons to the job and ensure that each person
can take a good position of not being exces­sively loaded.
(mass: approx. 101 kg (222-11/16 lb))

WT-506

SP-501

PC-110 PC-210 DK-705

Machine

PC-410

MK-730

MK-734

KH-102

DK-510

TK-101

MK-735

HT-509

LU-204

LU-301

UK-204

*1

Electronic system options

EK-606

*1

EK-607

*1

SC-508

*1

VI-506

IC-414

FK-511

✱ Electronic system options

*1

: No particular order in installation procedures.

*2

: Unable to be installed in C454e.

*3

: Varies depending on the applicable marketing area

UK-208

*1

KP-101

AU-102

AU-201

OT-506FS-533PK-519

ZU-606

*2

FS-535

*2

JS-506

JS-602

*2

PI-505

*2

PK-521

*2

SD-512

*2

FS-534

PK-520SD-511

FS-534SD

FK-508

*3

MK-728

*3

A2XKIXC001DA

Applied Machines: / / / /

E-2

Outline of installation procedures (C364e/C284e/C224e)

When installing the machine and associated options as a system, follow the order shown on the upper.

Caution:

• For the detailed installation procedures for each
option, follow the instructions given in the corre­sponding installation manual and perform the
procedures correctly. (Optional devices must be
installed after completing the main unit installa­tion.)

• When placing the machine on the floor, make
sure to use the paper feed cabinet or the desk
to secure the performance and the quality of
the product.

• To use this machine, install the dual scan docu­ment feeder, the reverse automatic document
feeder, or the original cover.
Even if you do not install the original cover, be
sure to install the hinge covers supplied with
the original cover.

• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.

• Lifting the machine in an awkward position or
transporting it in a poorly balanced position
could result in personal injury. When transport­ing the machine, assign an adequate number of
persons to the job and ensure that each person
can take a good position of not being exces­sively loaded.
(mass: approx. 85 kg (187-3/8 lb))

*1

: No particular order in

installation procedures.

*2

: Unable to be installed in

C224e.

*3

: Varies depending on the

applicable marketing area

UK-204

*1

PC-110 PC-210 DK-705

Machine

PC-410

MK-730

Electronic system options

EK-606

*1

EK-607

*1

UK-208

*1

SC-508

IC-414

*2

FK-511

DK-510

MK-734

HT-509

WT-506

✱ Electronic system options

KP-101

VI-506

*2

UK-209

AU-102

AU-201

JS-506

SP-501 OC-511DF-701

FS-533

PK-519

DF-624

MK-735

FS-534

SD-511

PK-520

FS-534SD

KH-102

FK-508

*3

MK-728

*3

A161IXC001DA

E-3

II. Installation space (unit: mm (inch))

bizhub C554e + PC-210 + ZU-606 + FS-535
+ LU-204

bizhub C364e + DF-701 + PC-210 + FS-534
+ MK-730

III. Pre-installation check items

1. Select a level and stable place for installing the
machine.

2. Be sure to use a power source of the voltage and
frequency indicated in the product specifications.
Ensure that the current carrying capacity of the
power outlet is at least equal to the current listed
in the product specifications.

3. Power the machine directly from a dedicated
power outlet. (Do not use an extension cord.)

4. Do not plug or unplug the power cord with wet or
dirty hands, otherwise you may get an electric
shock.

5. Avoid a hot and humid environment, or a place
exposed to direct sunlight.

6. Avoid a dusty location, or a place near volatile
and flammable substances.

7. Avoid a poorly ventilated place.

IV. Notes on using touch panel

Be sure to instruct users on the following points.

• This machine uses a capacitive touch panel.

When you touch the touch panel, use your fin­ger or the stylus pen supplied with the machine.
If you touch the panel using your nail or a pen
tip instead of using your finger or the stylus pen,
the touch panel does not respond normally.

• Pressing the touch panel hard may cause dam-

age.

• Do not strongly press the panel or press it using

the sharp tip of mechanical pencils.

• The key is a finger tapping (quick light touch

using a finger) operation.

A61DIXC021DB

1217

(47-15/16)

480

(18-7/8)

2763

(108-3/4)

1066

(41-15/16)

1246

(49-1/16)

428

(16-7/8)

818

(32-3/16)

1568

(61-3/4)

386

(15-3/16)

936

(36-7/8)

246

(9-11/16)

A61DIXC022DB

937

(36-7/8)

225

(8-7/8)

1822

(71-3/4)

660
(26)

1246

(49-1/16)

428

(16-7/8)

818

(32-3/16)

1568

(61-3/4)

386

(15-3/16)

936

(36-7/8)

246

(9-11/16)

E-4

V. Accessory parts

*1Varies depending on the applicable marketing

area.

*2

North American market: N/A
C554e/C454e for markets other than North Amer­ica: One
C364e/C284e/C224e for markets other than
North America: Two

*3

C364e/C284e/C224e only

*4

C554e/C454e only

Note:

The parts shown below are used when installing
options. Keep them safe.

• Paper size label: Large capacity unit (LU-301)
(C554e/C454e only)

• Label (Super G3 label): Fax kit

Note:

This manual provides the illustrations of the acces­sory parts and machine that may be slightly differ­ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.

No. Name Q’ty

1. User’s guide holder 1

2. Quick start guide 1

3. Installation manual 1 set

4. User’s guide CD 1

5. CD-ROM 1 set

6. Paper size label 1

7.

Label (Legal restrictions on copying)

*1

1

8. Label (Super G3 label) 1

9. Panel sheet 1

10. Cap A (Black) 2

11. Cap B (White) 2

12.

Power cord

*1

1

13.

Power cord instruction

*1

1

14.

Cord clamp

*2

0 to 2

15. Connector cover 1

16. Duct cover 1

17.

Screw A

*1*3

1

18. Screw B
1

19.

Screw C

*1

1

20.

Chart

*4

1

21. Stylus pen 1

22. Waste toner box 1

A1530308

V1160308

V1160330

After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.

Putting the head in the plastic bag
involves danger of suffocation.

E-5

VI. Removing the machine

1. Unpack and remove the machine package.

2. Remove the machine, holding it by the locations
on the left side and the handles on the right side
as shown in the illustration and keeping it level.

Caution:

Machine mass
C554e/C454e: approx. 101 kg/222-11/16 lb
C364e/C284e/C224e: approx. 85 kg/187-3/8 lb

• Make available collective manpower of an

appropriate size for transporting the machine.

• Before attaching the machine to the paper feed

cabinet, make sure that the supplied connector
cover is not attached.

• When attaching the machine, as the reference

fit the machine with the corner A and B of the
paper feed cabinet.

VII. Removing protective tape, packing
and other shipping materials

1. Remove the protective tape and the protective
materials.

Note:

After removing protective tape A, be sure to push

the area indicated by the “ ” mark to lock the
guide. (C554e/C454e only)

When holding the transportation handles,
be careful not to catch your fingers in the
machine.

A2XKIXC003DA

A2XKIXE034DA

A

B

Connector cover

A5AYIXC003DC

A5AYIXC002DC

<C554e/C454e>

A

E-6

2. Open the right door and remove the protective
sheet and packaging materials.

Note:

After removing the packaging materials, make
sure that the transfer roller assy is secured in
place. In the case of <NG>, press the transfer
roller assy into place so that it is secured as shown
in <OK>.

3. Remove the locking screws.

4. Remove the protective sheets.

A5C1IXC001DB

A5C1IXC003DB

A5C1IXC002DA

B

<Viewed from point B>

A5C1IXC004DA

<C364e/C284e/C224e>

A161IXC005DB

< OK > < NG >

A2XKIXC008DA

A2XKIXC009DA

E-7

5. Slide out the tray 1.

6. Remove the protective tapes from the inside of
the tray 1 and remove accessory part.

7. Slide out the tray 2 and remove the tray locking
materials.

8. Remove the protective tapes from the inside of
the tray 2 and remove accessory parts.

9. <C554e/C454e>
Open the lower front door.

<C364e/C284e/C224e>
Open the front door.

10. Remove the protective tape.

A5C1IXC032DA

A5C1IXC014DA

A5C1IXC015DA

A2XKIXC010DA

A161IXC015DB

A2XKIXC011DA

Protective tape

<C554e/C454e>

A5C1IXC016DA

Protective tape

<C364e/C284e/C224e>

E-8

11. Remove the protective tape from the developing
units.

Note:

Do not remove the tape A in this procedure.

12. Remove the protective materials from the four
places.

Note:

Keep the protective materials. It is necessary for
transporting the machine.

13. Release the lever of the drum unit (K).

14. Slightly slide the drum unit (K) out and remove
the protective tape

15. Slide the drum unit (K) into the machine.

16. Lock the drum unit (K) with the lever.

17. Install the supplied waste toner box.

Note:

Push the areas indicated by the “ ” marks to set
the waste toner box to the machine

* Perform the following steps 18 and 19 only when

installing C554e/C454e.

18. Close the lower front door.

19. Open the upper front door.

A5AYIXC005DB

A

A2XKIXC013DA

A2XKIXC014DA

A2XKIXC015DA

A2XKIXC016DA

E-9

VIII. Installing the toner cartridge

Note:

Since cartridge is not supplied with the machine,
purchase toner cartridge (of different colors) sepa­rately.

1. Shake the toner cartridge up and down and left to
right 5 to 10 times respectively.

Note:

Shake the cartridge adequately. Otherwise, it may
cause trouble.

2. Insert the toner cartridge into the machine.

Note:

• Make sure that the color is same between

inserting port and the toner cartridge.

• Make sure that the blue label position of the

toner cartridge is matched with the one of the
machine side.

3. Push the toner cartridge all the way in and rotate
it clockwise to lock it.

Note:

Make sure that the toner cartridge is pushed all the
way in.

4. Using the same procedure, install the toner car­tridges for other colors of toner.

5. <C554e/C454e>
Close the upper front door.
<C364e/C284e/C224e>
Close the front door.

IX. Mounting the accessory parts

1. Attach the supplied caps A and B.

2. Remove the protective cover from the supplied
stylus pen.

Note:

Discard the removed protective cover.

A0EDIXC020DA

A2XKIXC017DA

A2XKIXC018DA

A2XKIXC019DA

A2X0IXC068DA