International Rectifier SD403C04S10C, SD403C04S15C, SD403C08S10C, SD403C08S15C, SD403C10S10C Datasheet

Previous Datasheet

Index

Next Data Sheet

Bulletin I2067/A

SD403C..C SERIES

FAST RECOVERY DIODES

Features

High power FAST recovery diode series 1.0 to 1.5 µs recovery time

High voltage ratings up to 1600V

High current capability

Optimized turn on and turn off characteristics Low forward recovery

Fast and soft reverse recovery

Press-puk encapsulation

Case style conform to JEDEC DO-200AA Maximum junction temperature 125°C

Typical Applications

Snubber diode for GTO

High voltage free-wheeling diode

Fast recovery rectifier applications

Hockey Puk Version

430A

case style DO-200AA

Major Ratings and Characteristics

Parameters			SD403C..C	Units
IF(AV)			430	A
		@ Ths	55	°C
IF(RMS)			675	A
		@ Ths	25	°C
IFSM		@ 50Hz	6180	A
		@ 60Hz	6470	A
I2t		@ 50Hz	191	KA2s
		@ 60Hz	175	KA2s
VRRM	range		400 to 1600	V
trr	range		1.0 to 1.5	µs
		@ TJ	25	°C
TJ			- 40 to 125	°C

D-663

To Order

Previous Datasheet

Index

Next Data Sheet

SD403C..C Series

ELECTRICAL SPECIFICATIONS

Voltage Ratings

	Voltage	VRRM max. repetitive	VRSM , maximum non-	IRRM max.
Type number	Code	peak and off-state voltage	repetitive peak voltage	TJ = 125°C
		V	V	mA
	04	400	500
SD403C..S10C	08	800	900
	10	1000	1100	35
	12	1200	1300
SD403C..S15C	14	1400	1500
	16	1600	1700

Forward Conduction

	Parameter	SD403C..C	Units	Conditions
IF(AV)	Max. average forward current	430(210)	A	180° conduction, half sine wave.
	@ Heatsink temperature	55(75)	°C	Double side (single side) cooled
IF(RMS)	Max. RMS current	675	A	@ 25°C heatsink temperature double side cooled
IFSM	Max. peak, one-cycle	6180		t = 10ms		No voltage
	non-repetitive forward current	6470	A	t = 8.3ms		reapplied
		5200		t = 10ms		100% VRRM
		5445		t = 8.3ms		reapplied		Sinusoidal half wave,
I2t	Maximum I2t for fusing	191		t = 10ms		No voltage		Initial T	J	= T	max.
											J
		175	KA2s	t = 8.3ms		reapplied
		135		t = 10ms		100% VRRM
		123		t = 8.3ms		reapplied
I2Öt	Maximum I2Öt for fusing	1910	KA2Ös	t = 0.1 to 10ms, no voltage reapplied
VF(TO)1 Low level of threshold voltage		1.00	V	(16.7% x p x IF(AV) < I < p x IF(AV)), TJ = TJ max.
VF(TO)2 High level of threshold voltage		1.20		(I > p x IF(AV)), TJ = TJ max.
rf1	Low level of forward slope resistance	0.56	mW	(16.7% x p x IF(AV) < I < p x IF(AV)), TJ = TJ max.
rf2	High level of forward slope resistance	0.70		(I > p x IF(AV)), TJ = TJ max.
VFM	Max. forward voltage	1.83	V	Ipk= 1350A, TJ = 25°C, tp = 10ms sinusoidal wave

Recovery Characteristics

Code	TJ = 25	o	C	Test conditions			Max. values @ TJ= 125°C
	typical trr			Ipk	di/dt	Vr	trr	Qrr	Irr
	@ 25% IRRM			Square Pulse			@ 25% IRRM
	(ms)			(A)	(A/ms)	(V)	(ms)	(mC)	(A)
S10	1.0						2.4	52	33
				750	25	- 30
S15	1.5						2.9	90	44
							D-664

To Order

Previous Datasheet

Index

Next Data Sheet

SD403C..C Series

Fig. 3 - Current Ratings Characteristics

Fig. 4 - Current Ratings Characteristics

Fig. 5 - Forward Power Loss Characteristics

Fig. 6 - Forward Power Loss Characteristics

Fig. 7 - Maximum Non-repetitive Surge Current	Fig. 8 - Maximum Non-repetitive Surge Current
Single and Double Side Cooled	Single and Double Side Cooled

D-667

To Order