HD Digital Television Recorder
User’s Manual
HDR-7500T
The default password is 0000.
Notice
English
Thank you for purchasing a HUMAX product. Please read this user’s manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user’s manual next to your product for future reference. The information in this user’s manual is subject to change without notice.
Copyright (Copyright © 2011 HUMAX Corporation)
Not to be copied, used or translated in part or whole without HUMAX’s prior consent in writing except approval of ownership of copyright and copyright law.
The Copyright Act 1968 only permits to copy broadcasts for Private and Domestic purposes in limited circumstances. Humax does not authorise any use of this feature in any way which may amount to a breach of any law or the rights of the owner of copyright in film or broadcast.
Warranty
The warranty does not cover parts which may become defective due to misuse of the information contained in this manual.
Meaning of Symbols
To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury.
This symbol indicates important instructions accompanying the product.
Warnings, Cautions and Notes
Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations.
Warning
Indicates a hazardous situation which could result in serious injury.
Caution
Indicates a situation which could damage the equipment or other apparatus.
1
Notice
Note
Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use and maintain the installation.
Disposal Instructions
This product should not be disposed with other household wastes at the end of its working life. Please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. This will prevent possible harm to the environment or human health from uncontrolled waste disposal.
Trademarks
t .BOVGBDUVSFE VOEFS MJDFOTF GSPN %PMCZ -BCPSBUPSJFT %PMCZ BOE UIF EPVCMF % TZNCPM BSF USBEFNBSLT PG %PMCZ -BCPSBUPSJFT
t )%.* UIF )%.* -PHP BOE )JHI %FöOJUJPO .VMUJNFEJB JOUFSGBDF BSF USBEFNBSLT BOE SFHJTUFSFE USBEFNBSLT PG )%.* -JDFOTJOH --$
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
IceTV’s free trial, discounted annual subscription, life-time subscription, and other offers from time to time are provided by IceTV only. Humax is not responsible for fulfillment of any of these offers and will not accept liability for any loss, financial or otherwise, associated with the acceptance of any of these offers. Humax also does not make any representations or warranties, express or implied, in respect of the offers or such services.
2
Contents
Notice
Quick Start Guide
1.Checking Accessories
2.Product Overview
3.Connections
4.Powering On
5.First Installation Wizard
6.Menu Overview
Basic Operation
Changing Channels Volume / Mute / Audio Display Format / Resolution
Programme Information (i-plate) Sleep Timer
Subtitle
0QUJPO 5FMFUFYU
Channel List
Changing Channels
&EJUJOH $IBOOFMT JO $IBOOFM -JTU
Editing Favourite Channels
Editing Channels
TV Guide
Watching Programmes
Setting Reminders or Recordings Finding Programmes
4DIFEVMF
|
|
English |
|
1 |
Renaming Files |
42 |
|
4 |
Creating Folder |
42 |
|
Moving / Copying Files |
43 |
||
4 |
|||
6TJOH .VTJD -JTU |
|
||
4 |
|||
Playing Files |
44 |
||
8 |
|||
Music Player |
45 |
||
12 |
|||
Editing Files |
45 |
||
13 |
|||
6TJOH 1IPUP -JTU |
|
||
15 |
|||
Photo Slideshow |
46 |
||
|
|||
16 |
Slide Mode |
47 |
|
16 |
Editing Files |
47 |
|
|
|
||
16 |
HUMAX TV Portal |
48 |
|
17 |
Preferences |
49 |
|
18 |
|||
19 |
Parental Control |
49 |
|
19 |
-BOHVBHF 4FUUJOH |
|
|
|
4FUUJOH 1PXFS 0O 0ò5JNFS |
|
|
|
Video Setting |
51 |
|
21 |
Audio Setting |
52 |
|
Screen Display |
53 |
||
21 |
|||
EPG Type Setting |
53 |
||
|
|||
Installation |
54 |
||
23 |
|||
25 |
Automatic Search |
54 |
|
27 |
Manual Search |
55 |
|
Software Update |
56 |
||
27 |
|||
Dynamic Update |
58 |
||
28 |
|||
Antenna Power |
58 |
||
29 |
|||
Factory Default |
59 |
||
|
Recording and Playback |
31 |
System |
60 |
|
4ZTUFN *OGPSNBUJPO |
|
|||
Recording |
31 |
|||
4JHOBM %FUFDUJPO |
|
|||
Playback |
35 |
|||
Power Management |
61 |
|||
Playback Controls |
36 |
|||
Data Storage |
61 |
|||
1BVTJOH BOE 3FXJOEJOH -JWF57 543 |
|
|||
Internet Setting |
62 |
|||
|
|
Media List |
38 |
Switching Storage |
38 |
Switching Media |
38 |
6TJOH UIF %-/" .FEJB 4FSWFS |
|
Connecting to Home Network |
|
Playing Files On Your Receiver |
|
Playing Files On Your PC |
|
6TJOH7JEFP -JTU |
|
Playing Files |
41 |
Using Play Options |
41 |
Editing Files |
42 |
Deleting Files |
42 |
Sorting Files |
42 |
-PDLJOH 'JMFT |
42 |
Appendix |
63 |
Specification |
63 |
Service and Support |
65 |
Safety Warning |
66 |
Trouble Shooting |
68 |
&SSPS .FTTBHF |
|
Glossary |
72 |
3FNPUF $POUSPM $PEF -JTU |
|
01&/ 4063$& 40'58"3& /05*$& |
|
1SPCMFN $IFDL -JTU |
|
3
Quick Start Guide
1. Checking Accessories
|
Quick Start Guide |
IceTV Flyer |
|
User's manual |
|
Remote Control |
CD Manual |
IceTV Flyer |
/ Batteries |
/ Quick Start Guide |
(Quick Manual) |
HDMI Cable |
RCA Cable |
Note: The accessories may vary according to area.
2. Product Overview
Front Panel
STANDBY |
VOL+/- |
|||
Switches between operation |
||||
and standby modes. |
|
|
P+/- |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
USB Port
Connect a USB storage device.
Note: The image shown may differ from the actual product.
4
Quick Start Guide
English
Rear Panel
ANTENNA IN
Connect to TV antenna.
ANTENNA OUT
Connects to the TV or VCR using an RF cable.
COMPONENT(YPbPr) OUT
Connects to the TV or VCR using a component cable.
ETHERNET
Service port
USB Port
Connect a USB storage device.
ON/OFF
VIDEO
Connect to the TV or VCR using an RCA cable.
AUDIO
Connect to the TV or VCR using an RCA cable.
SPDIF
Connect to the audio system using an S/PDIF cable. (digital audio)
HDMI
Connect to the TV using an HDMI cable.
Note: The image shown may differ from the actual product.
5
Quick Start Guide
Remote Control
|
MUTE |
Mutes audio. |
|
STANDBY |
Switches between operation and standby modes. |
1 |
MODE |
Changes the mode of remote. |
|
||
|
NUMERIC |
|
|
TV Portal |
Enters HUMAX TV Portal. |
|
MENU |
Displays the main menu. |
|
Playback |
Play, II Pause, Stop, Record, |
2 |
Control |
Rewind, Fast Forward, I Previous, INext, |
3 |
Buttons |
Instant Replay, Skip |
COLOUR |
|
|
|
Colour keys for interactive applications. |
|
|
Buttons |
|
|
MEDIA |
Displays the media list. |
|
GUIDE |
Displays the programme guide. |
|
ARROW |
Moves the cursor up, down, left or right. |
|
Buttons |
|
|
OK |
Selects (Enters) a menu or confirms a selection. |
|
EXIT |
Exits all On-Screen Display (OSD) screens. |
|
BACK |
Returns to the previous channel. |
|
|
Goes back to the previous screen. |
Note:
t 5IF JNBHF TIPXO NBZ EJòFS GSPN UIF BDUVBM QSPEVDU
t 4PNF QMBZCBDL DPOUSPM CVUUPOT NBZ OPU GVODUJPO EFQFOEJOH PO UIF DPOUFOUT
6
Quick Start Guide
English
+/- |
Adjusts the audio volume. |
P / |
Changes the channel or page. |
LIST |
Displays the channel list. |
i (Information) |
Displays the channel and programme information. |
OPT+ |
Displays the channels attributes. |
AUDIO |
Displays the audio list. |
SUBTITLE |
Displays the subtitle language list. |
TV/RADIO |
Switches between TV and radio modes. |
TEXT |
Enters the digital text service. |
SOURCE |
Switches between the input sources. |
SLEEP |
Sets the sleep timer. |
V-FORMAT |
Sets the resolution of video. |
WIDE |
Sets the display format. |
Playback |
"EE #PPLNBSL #PPLNBSL-JTU 4MPX |
Control |
|
Buttons |
|
4 |
|
Inserting Batteries
1.Press the hook upward and lift the battery cover off.
2.Insert the batteries (supplied) matching the plus(+) and minus(-) at each end.
3.Close the cover.
i
7
Quick Start Guide
3. Connections
This section describes how to connect your product to match your particular devices setup and to gain optimum signal quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate procedure depending on the device you have.
Note: If you encounter any problems setting up your product, please contact HUMAX Customer Helpline.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO |
COMPONENT IN |
HDMI |
DVI for TV |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
DVI 
Connecter
RCA Cable |
COMPONENT Cable |
HDMI Cable |
2 |
3 |
1 |
|
|
HDMI Cable |
Antenna |
|
2 |
S/PDIF Cable |
Ethernet Cable |
S/PDIF |
LAN |
Router
8
Quick Start Guide
English
Connecting the Antenna
Connect the aerial to the ANTENNA IN.
Connecting the TV
You can select one of the following connections depending on the device you have.
TV with the HDMI connector;
For the best picture quality, connect the product and TV using a HDMI cable.
TV with the DVI connector;
For very good picture quality, connect the product and TV using a HDMI cable and a HDMI-to-DVI converter for video.
:PV XJMM BMTP SFRVJSF B 3$" DBCMF "VEJP - 3 DPOOFDUFE UP UIF OFDFTTBSZ DPOOFDUJPO T PO ZPVS57 %JTQMBZ for Audio.
TV with the Component(YPbPr) connector;
For good picture quality, connect the product and TV using a component cable.
For additional audio connections you can either
$POOFDU UIF QSPEVDU BOE57 VTJOH BO 3$" DBCMF "VEJP - 3
2.When using the digital audio system, connect the product and the digital audio system using an S/ PDIF cable.
Note: Connecting your TV directly to the audio/video output of the product will assure a more vivid picture and enhance your viewing enjoyment.
9
Quick Start Guide
Connecting the Network
Connecting to the LAN; $POOFDU POF FOE PG UIF &UIFSOFU DBCMF UP UIF QSPEVDU BOE UIF PUIFS FOE UP UIF -"/ SPVUFS
Connecting to the Wi-Fi (Wireless LAN);
1.Power off the receiver and disconnect the Ethernet cable.
2.Insert the HUMAX Wi-Fi dongle into an USB port and power on the receiver.
3.Go to MENU > Settings > System > Internet Setting > Configure Wi-Fi.
Note: If Configure Wi-Fi is disabled, make sure that the Ethernet cable is disconnected and check if the HUMAX Wi-Fi dongle is inserted correctly into an USB port on the receiver.
4.Select Network Name and press the OK button. The list of all available Wi-Fi Networks detected will appear. Select the Network you want to connect to and press the OK button.
5.Select the Security Type of your Wi-Fi router. If you do not know the security type, do not change this option. (Default: WPA-PSK(TKIP))
10
Quick Start Guide
English
6.Select Password and press the OK button. Enter the WEP key/Password of you router. (This information is normally written on your router.)
7.Press the YELLOW button to complete.
8.Select APPLY and press the OK button.
9.When the connection is complete, press the OK button and press the EXIT button to return to the menu.
Note:
t .BLF TVSF UIF EJTUBODF CFUXFFO UIF8J 'J BDDFTT QPJOU BOE UIF QSPEVDU JT OPU UPP GBS BXBZ 5IJT NBZ lower the quality of service.
t *U JT SFDPNNFOEFE UP QVSDIBTF B XJSFMFTT 64# EPOHMF EJTUSJCVUFE CZ )6."9 0UIFS QSPEVDUT NBZ OPU function or respond. Go to www.humaxdigital.com/au to purchase a HUMAX Wi-Fi dongle.
2 1
WLAN USB Dongle
Ethernet Cable
LAN
Wireless Router |
Router |
11
Quick Start Guide
4. Powering On
1.Connect the power cord of the product to a wall outlet.
2.Ensure the ON/OFF switch at the rear of the product is switched to ON.
3.Power on by pressing the STANDBY button on the remote control or the STANDBY button at the front of the product.
12
Quick Start Guide
English
5. First Installation Wizard
When powering on your product for the first time after purchase or performing the factory default in menu, the installation wizard will operate automatically.
Note: If you exit the installation wizard without fully completing the channel searching procedure, you may not have all of the channels available. In this case, you can use the Settings > Installation menu to search for more channels.
1.Region
Select the state you currently live in.
2.Display
Set the video output to your TV.
3.Automatic Search
Channel search will begin automatically. Save the found channels when the search is complete.
13
Quick Start Guide
4.EPG Type
Select the EPG Type you want.
If you already have an IceTV account or wish to take advantage of the additional features of IceTV, select IceTV.
Note: To use the IceTV EPG, connect the receiver to the internet via Ethernet or USB wireless dongle. Refer to Connecting the Network.
5.Result
The result of the Installation Wizard is shown. Select Finish to exit the wizard.
14
Quick Start Guide
English
6. Menu Overview
$IBOOFM -JTU
TV Guide
Video
Music
Photo
HUMAX TV Portal
Settings
Preference
t |
1BSFOUBM $POUSPM |
t |
-BOHVBHF |
t |
5JNF |
t |
7JEFP |
t |
"VEJP |
t |
3FDPSEJOH |
t |
4DSFFO %JTQMBZ |
t &1(5ZQF |
|
Edit Channels |
|
t |
&EJU 'BWPVSJUF -JTU |
t &EJU $IBOOFM -JTU |
|
Installation |
|
t |
"VUPNBUJD 4FBSDI |
t |
.BOVBM 4FBSDI |
t |
4PGUXBSF 6QEBUF |
t |
%ZOBNJD 6QEBUF |
t |
"OUFOOB 1PXFS |
t 'BDUPSZ %FGBVMU |
|
System |
|
t |
4ZTUFN *OGPSNBUJPO |
t |
4JHOBM %FUFDUJPO |
t |
1PXFS .BOBHFNFOU |
t |
%BUB 4UPSBHF |
t |
*OUFSOFU 4FUUJOH |
How to Navigate
|
Displays the main menu |
or |
Selects (Enters) a menu or |
|
confirms a selection |
Goes back to the previous screen
Moves among menus or options
Changes or adjusts the option
&OUFST UIF OVNCFS _
Exits all On-Screen Display (OSD) screens
15
Basic Operation
Changing Channels
You can change the channels in several ways.
Press the P / button.
Enter the channel number directly. (0-9)
Go to the channel list and select a channel.
Note: Press the TV/RADIO button to switch between TV and radio channels.
Volume / Mute / Audio
To adjust the audio volume, press the +/- button.
To mute the audio temporarily, press the MUTE button.
Setting Audio Options
Audio options are available only when the programme supports multiple audio languages. Press the AUDIO button to change the audio language and direction.
Each time you press this button, the value changes.
Note:
t 5IF NVUF GVODUJPO SFNBJOT TFU XIJMF ZPV change channels.
t :PV DBOOPU TFU UIF BVEJP EJSFDUJPO XIFO UIF programme is broadcast in Dolby Digital.
Display |
Select |
Confirm |
16
Basic Operation
Display Format / Resolution
Setting Display Format
Press the WIDE button to set the display format according to the screen ratio.
Each time you press this button, the value changes.
Screen ratio 4:3: Auto – Letterbox 16:9 –
Letterbox 14:9 – Centre
Screen ratio 16:9: Auto – Pillarbox – Zoom
English
Display
Setting Resolution
Press the V-FORMAT button to set the resolution of the screen.
Each time you press this button, the value changes.
576i - 576p - 720p - 1080i - Original
Note: When connected with an HDMI cable, you can only change to resolutions the TV supports.
Display
17
Basic Operation
Programme Information (i-plate)
The i-plate is an information banner that is displayed for a certain period of time whenever you change channels. Press the i button while watching a progamme to display the i-plate. Press the EXIT button to hide.
|
|
|
|
Playing time |
|
Icons |
Signal strength and quality |
||||
|
|
|
|
|
|||||||
|
|
|
Channel number and name |
Current time and date |
|
|
|
Group name |
|||
|
|
|
Programme name |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Display |
Navigation mode |
Viewing detailed programme information
Press the i button again while the i-plate is displayed.
Viewing previous/next programme information
Press the / button while the i-plate is displayed.
Viewing programme information of other channels
Press the / button while the i-plate is displayed. Press the OK button to change to the selected channel.
Searching related contents
Press the OPT+ button while the i-plate is displayed. This option is supported only when the network is connected.
Icons
The icons represent the information and services provided.
|
-PDLFE QSPHSBNNF |
|
Teletext |
|
|
|
|
|
Pay TV / encrypted programmes (CAS icons) |
|
Resolution |
|
|
|
|
|
Parental guidance programme |
|
HD programme |
|
|
|
|
|
Subtitle |
|
Multiaudio |
|
|
|
|
|
Dolby Digital audio |
|
|
|
Dolby Digital Plus audio |
|
|
|
|
|
|
Note: Programme information is not displayed when there is no programme information.
18
Basic Operation
Sleep Timer
Press the SLEEP button to set the automatic turn off time.
Each time you press this button, the value changes.
10 - 20 - 30 - 60 - 90 - 120 minutes
English
Display
Subtitle
You can select the subtitle language when subtitle information is provided.
Press the SUBTITLE button to change the subtitle language.
Each time you press this button, the value changes.
Note: You can choose to always display the subtitle when available.
Display |
Select |
Confirm |
19
Basic Operation
Option
You can set the options for the watching channel.
1.Press the OPT+ button.
2.Select an option.
Favourite: Select the favourite group to add the channel.
Lock: Select On or Off.
Delete: Press the OK button.
Rename: Press the OK button and enter the name in the keyboard.
3.Select OK to save and exit.
Display |
Select |
Confirm |
Teletext
Teletext is a free service broadcast which gives the latest information on news, weather and many other topics. You can use interactive services in teletext mode.
All teletext supporting channels have the teletext icon on the i-plate.
1.Press the TEXT button.
2.To display the teletext menu, press the MENU button in teletext mode.
3.Select the teletext function you want and press the OK button.
Display |
Select |
Confirm |
20
Channel List
English
The channel list will help you find the channel you want to watch quickly and easily.
You can access the channel list in several ways.
Press the LIST button.
Press the MENU button and select Channel List.
Changing Channels
Select the channel you want to watch and press the OK button. The displayed channel will change.
Note:
t 
-PDLFE DIBOOFM 
: Scrambled channel (CAS icons)
t 1SFTT UIF i button to view the detailed channel information. t 1SFTT UIF LIST or EXIT button to exit.
Advanced Options
Changing Group
You can display the list of the selected channel group.
TV, Radio, Favourite 1~5, Recent
1.Press the button.
2.Select a channel group.
3.Press the OK button.
Note: Press the TV/RADIO button to switch between TV and Radio groups.
Sorting Channels
Press the RED button to sort the list in numerical or alphabetical order.
Display/Change |
Select |
Confirm |
21
Channel List
Editing Channels in Channel List
You can edit each channel in the channel list, as well as in menu. To edit the multiple channels, go to the
MENU > Settings > Edit Channels.
Locking / Deleting / Renaming Channels
1.Select a channel you want to edit and press the GREEN button.
2.Select an option.
Lock: Select On or Off.
Delete: Press the OK button.
Rename: Press the OK button and enter the name in the keyboard.
3.Select OK to save and exit.
Note: 5IF EFGBVMU QBTTXPSE JT *G ZPV IBWF
forgotten your password, please contact
HUMAX Customer Service.
Setting Favourite Channels
GREEN |
|
|
Display |
Select |
Confirm |
You can select your favourite channels and include them in the favourite group.
1.Select a channel and press the GREEN button.
2.Select Favourite and press the OK button.
3.Select a favourite group you want to include the channel in and press the OK button.
To remove a channel from a favourite group, select the group and press the OK button again.
4.Select OK to save and exit.
22
Managing Channels
English
Editing Favourite Channels
The Edit Favourite List menu will help you add or remove channels from the favourite groups.
MENU Settings Edit Channels Edit Favourite List
Group name
Marked / Total channels
Favourite group name
Function buttons
: Coloured or OPT+ button
Select |
Mark/Confirm |
Page up/down |
Note:
t 1SFTT UIF MENU or EXIT button to exit. Press the BACK button to return to the previous screen. t 5IF DIBOOFMT UIBU BSF BVUPNBUJDBMMZ OVNCFSFE CZ CSPBEDBTUFS DBOOPU CF EFMFUFE PS NPWFE
Adding / Removing Favourite Channels
1.Press the YELLOW button and select the favourite group you want to edit.
2.To add channels to the favourite list, select the channels you want to add using the / and OK button in the left column and then press the RED button. The added channels will appear in the right column.
3.To remove channels from the favourite list, select the channels you want to remove in the right column and then press the RED button.
Moving Channels
1.Select the channels using the / and OK button.
2.Press the GREEN button.
3.Move the selected channels to the location you want using the / and OK button.
Note: You can move the channels in the right column only.
23
Managing Channels
Renaming Favourite Groups
1.Press the YELLOW button and select the favourite group you want to edit.
2.Press the OPT+ button.
3.Select Rename Favourite.
4.Enter the name in the keyboard.
Advanced Options
Changing Group
To list the channels of other groups in the left column, press the GREEN button and select a group you want.
Note: Press the TV/RADIO button to switch between TV and Radio groups.
Changing Background
You can change the channel displayed in the background while editing.
1.Select the channel you want to watch.
2.Press the BLUE button. The displayed channel will change.
Selecting / Releasing All Channels
1.Press the OPT+ button.
2.Select Select All.
3.To release all, select Release All.
24
Managing Channels
English
Editing Channels
The Edit Channel List menu will help you delete, move lock or rename multiple channels.
MENU Settings Edit Channels Edit Channel List
Group name
Marked / Total channels
Function buttons
: Coloured button
Select |
Mark/Confirm |
Page up/down |
Note:
t 
-PDLFE DIBOOFM 
: Scrambled channel (CAS icons) t 1SFTT UIF MENU or EXIT button to exit.
t 5IF DIBOOFMT UIBU BSF BVUPNBUJDBMMZ OVNCFSFE CZ CSPBEDBTUFS DBOOPU CF EFMFUFE PS NPWFE
Deleting Channels
1.Select the channels using the / and OK button.
2.Press the RED button.
25
Managing Channels
Locking / Unlocking Channels
1.Select the channels using the / and OK button.
2.Press the BLUE button.
3.Select Lock. To unlock, select Unlock.
Advanced Options
Changing Group
To list the channels of other groups, press the GREEN button and select a group you want.
Note: Press the TV/RADIO button to switch between TV and Radio groups.
Changing Background
You can change the channel displayed in the background while editing.
1.Select the channel you want to watch.
2.Press the YELLOW button. The displayed channel will change.
Selecting / Releasing All Channels
1.Press the BLUE button.
2.Select Select All.
3.To release all, select Release All.
26
TV Guide
English
The TV guide is an on-screen guide of grid type which displays the programme information of channels in time and date order.
You can access the TV guide in several ways.
Press the GUIDE button.
Press the MENU button and select TV Guide.
Note: Press the GUIDE or EXIT button to exit. Press the BACK button to return to the previous screen.
Preview
Current time and date
Information of the selected programme: channel number & name, 
programme name, simple information, favourite group, network type, and icons
Time bar
Function buttons
: Coloured buttons
Select |
Confirm |
Page up/down |
Note:
t 1SFTT UIF i button to view the detailed programme information.
t 
: Scheduled programme (Red: Recording, Blue: Reminder), 
: Recording programme, 
: Present time
Watching Programmes
1.Select a programme and press the OK button. The programme will be displayed in the preview.
2.Press the OK button again to exit the TV guide and watch the programme.
27
TV Guide
Setting Reminders or Recordings
1.Select a future programme and press the OK button.
2.Select Record the whole programme or
Reminder and press the OK button.
3.Press the OK button again to cancel the reservation.
The reserved programmes will be added automatically in Schedule.
Note:
t #Z TFMFDUJOH Reminder an on-screen notification will appear prior to the selected
programme starts. Select OK to automatically change to the channel the programme commences. Select Cancel to continue watching the current programme and not change channels.
t *G UIF QSPHSBNNF JT DPOøJDUFE XJUI BOPUIFS QSPHSBNNF BEKVTU UIF SFTFSWBUJPO BQQSPQSJBUFMZ
t *G UIF DIBOOFM JT MPDLFE ZPV XJMM CF QSPNQUFE UP FOUFS ZPVS QBTTXPSE UP DPNQMFUF UIF SFTFSWBUJPO 5IF EFGBVMU QBTTXPSE JT *G ZPV IBWF GPSHPUUFO ZPVS QBTTXPSE QMFBTF DPOUBDU )6."9 $VTUPNFS
Service.
t :PV DBO SFTDIFEVMF SFNJOEFST PS SFDPSEJOHT 3FGFS UP Scheduling Reminders and Recordings.)
t *G UIF QSPHSBNNF ZPV XBOU UP SFDPSE JT B TFSJFT ZPV DBO TFMFDU UP SFDPSE UIF XIPMF TFSJFT )PXFWFS this function may not be available depending on the broadcasting environment.
Advanced Options
Quick Navigation
Press the / button to move to the previous/next programme.
Press the / button to jump back/ahead two hours.
Press the I / I button to move to the previous/next day.
Changing Group
To list the channels of other groups, press the BLUE button and select a group you want.
Note:
t 1SFTT UIF TV/RADIO button to switch between TV and Radio groups.
t 5P TFBSDI TQFDJöD QSPHSBNNFT HP UP Find Programmes by pressing the GREEN button. (Refer to
Finding Programmes.)
28
TV Guide
English
Finding Programmes
Find will help you find the programmes more specifically using the keyword or genre.
By Keyword
1.Press the GREEN button.
2.Select Keyword and press the button.
3.Select a keyword and press the OK button.
4.Press the YELLOW button to add the selected programme to schedule.
Note: To enter a new keyword, select New Keyword. Type the new keyword and press the YELLOW button to confirm.
By Genre
1.Press the GREEN button.
2.Select Genre and press the button.
3.Select a genre and press the OK button.
4.Select the specific genre and press the OK or button.
5.Scroll through the list and press the YELLOW button to add to schedule.
GREEN |
|
|
Display |
Confirm |
Select |
Page up/down
Note:
t 1SFTT UIF J CVUUPO UP WJFX UIF EFUBJMFE QSPHSBNNF JOGPSNBUJPO
t 1SFTT UIF OK button to watch a found programme. (Refer to Changing Channels.)
t :PV DBO TFU SFNJOEFST PS SFDPSEJOHT GPS GVUVSF QSPHSBNNFT 3FGFS UP Setting Reminders or Recordings.)
29
Loading...