T-13/4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps
Technical Data
H
HLMP-1600, HLMP-1601 HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641 HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651 HLMP-3680, HLMP-3681
•Integral Current Limiting Resistor
•TTL Compatible
Requires no External Current Limiter with 5 Volt/12 Volt Supply
•Cost Effective
Saves Space and Resistor Cost
•Wide Viewing Angle
•Available in All Colors
Red, High Efficiency Red, Yellow, and High Performance Green in T-1 and
T-13/4 Packages
Figure A. T-1 Package.
The 5 volt and 12 volt series lamps contain an integral current limiting resistor in series with the LED. This allows the lamp to be driven from a 5 volt/12 volt source without an external current limiter. The red LEDs are made from GaAsP on a GaAs substrate. The High Efficiency Red and Yellow devices use GaAsP on a GaP substrate.
The green devices use GaP on a GaP substrate. The diffused lamps provide a wide off-axis viewing angle.
The T-13/4 lamps are provided with sturdy leads suitable for wire wrap applications. The T-13/4 lamps may be front panel mounted by using the HLMP-0103 clip and ring.
Figure B. T-13/4 Package.
5964-9296E |
1-113 |
|
Part |
|
|
Iv mcd |
|
|
|
|
|
Number |
|
Operating |
|
|
2θ1/2[1] |
Package |
|
|
|
|
|
|||||
Color |
HLMP- |
Package |
Voltage |
Min. |
Typ. |
Outline |
||
High |
1600 |
T-1 Tinted Diffused |
5 |
2.1 |
8.0 |
60° |
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Efficiency |
|
|
|
|
|
|
|
|
1601 |
|
12 |
|
|
|
|
|
|
Red |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3600 |
T-13/4 Tinted Diffused |
5 |
|
|
|
60° |
B |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3601 |
|
12 |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow |
1620 |
T-1 Tinted Diffused |
5 |
2.2 |
8.0 |
60° |
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1621 |
|
12 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3650 |
T-13/4 Tinted Diffused |
5 |
|
|
|
60° |
B |
|
|
|
|
|
|
|
|
|
|
3651 |
|
12 |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High |
1640 |
T-1 Tinted Diffused |
5 |
1.6 |
8.0 |
60° |
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Performance |
1641 |
|
12 |
|
|
|
|
|
Green |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3680 |
T-13/4 Tinted Diffused |
5 |
|
|
|
60° |
B |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3681 |
|
12 |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note:
1. θ1/2 is the off-axis angle at which the luminous intensity is 1/2 the axial luminous intensity.
Absolute Maximum Ratings at TA = 25°C
|
Red/HER/ |
Red/HER/ |
|
|
|
Yellow |
Yellow |
Green |
Green |
|
5 Volt Lamps |
12 Volt Lamps |
5 Volt Lamps |
12 Volt Lamps |
|
|
|
|
|
DC Forward Voltage (T = 25°C) |
7.5 Volts[2] |
15 Volts[3] |
7.5 Volts[2] |
15 Volts[3] |
A |
|
|
|
|
Reverse Voltage (IR = 100 μA) |
5 Volts |
5 Volts |
5 Volts |
5 Volts |
Operating Temperature Range |
-40°C to 85°C |
-40°C to 85°C |
-20°C to 85°C |
-20°C to 85°C |
Storage Temperature Range |
-55°C to 100°C |
-55°C to 100°C |
-55°C to 100°C |
-55°C to 100°C |
|
|
|
|
|
Lead Soldering Temperature |
|
260°C for 5 seconds |
|
Notes:
2.Derate from TA = 50°C at 0.071 V/°C, see Figure 3.
3.Derate from TA = 50°C at 0.086 V/°C, see Figure 4.
1-114