HP HCPL-2631, HCPL-2630, HCPL-4661, HCPL-2611, HCPL-2601 Datasheet

High CMR, High Speed TTL

Compatible Optocouplers

Technical Data

H

6N137

HCNW137 HCPL-0631 HCNW2601 HCPL-0661 HCNW2611 HCPL-2601 HCPL-0600 HCPL-2611 HCPL-0601 HCPL-2630 HCPL-0611 HCPL-2631 HCPL-0630 HCPL-4661

Features

•5 kV/μs Minimum Common Mode Rejection (CMR) at

VCM = 50 V for HCPL-X601/

X631, HCNW2601 and

10 kV/μs Minimum CMR at

VCM = 1000 V for HCPLX611/X661, HCNW2611

•High Speed: 10 MBd Typical

•LSTTL/TTL Compatible

•Low Input Current Capability: 5 mA

•Guaranteed ac and dc

Performance over Temperature: -40°C to +85°C

•Available in 8-Pin DIP, SOIC-8, Widebody Packages

Applications

•Isolated Line Receiver

•Computer-Peripheral Interfaces

•Microprocessor System Interfaces

•Digital Isolation for A/D, D/A Conversion

•Switching Power Supply

•Instrument Input/Output Isolation

•Ground Loop Elimination

•Pulse Transformer Replacement

	• Strobable Output (Single	Functional Diagram
	Channel Products Only)	6N137, HCPL-2601/2611
	• Safety Approval
		HCPL-0600/0601/0611
	UL Recognized - 2500 V rms		HCNW137/2601/2611
	for 1 minute and 5000 V rms*	NC	1		8	VCC
	for 1 minute per UL1577	ANODE	2		7	VE
	CSA Approved
	VDE 0884 Approved with	CATHODE	3		6	VO
	VIORM = 630 V peak for	NC	4		5	GND
	HCPL-2611 Option 060 and			SHIELD
	VIORM = 1414 V peak for
	HCNW137/26X1			TRUTH TABLE
	BSI Certified
			(POSITIVE LOGIC)
	(HCNW137/26X1 Only)	LED		ENABLE	OUTPUT
	• MIL-STD-1772 Version	ON		H	L
	Available (HCPL-56XX/	OFF		H	H
		ON		L	H
	66XX)
		OFF		L	H
		ON		NC	L
		OFF		NC	H

•Power Transistor Isolation in Motor Drives

•Isolation of High Speed Logic Systems

Description

The 6N137, HCPL-26XX/06XX/ 4661, HCNW137/26X1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is

ANODE 1

CATHODE 1

CATHODE 2

ANODE 2

HCPL-2630/2631/4661
HCPL-0630/0631/0661
1	8	VCC
2	7	VO1
3	6	VO2
4	5	GND
	SHIELD

TRUTH TABLE (POSITIVE LOGIC)

LED	OUTPUT
ON	L
OFF	H

*5000 V rms/1 Minute rating is for HCNW137/26X1 and Option 020 (6N137, HCPL-2601/11/30/31, HCPL-4661) products only.

A 0.1 μF bypass capacitor must be connected between pins 5 and 8.

CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.

1-146

5965-3594E

an open collector Schottkyclamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/μs for the HCPL-X601/X631 and HCNW2601, and 10,000 V/μs for the HCPL-X611/X661 and HCNW2611.

This unique design provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40°C to +85°C allowing troublefree system performance.

The 6N137, HCPL-26XX, HCPL06XX, HCPL-4661, HCNW137, and HCNW26X1 are suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and are recommended for use in extremely high ground or induced noise environments.

Selection Guide

								Widebody
Minimum CMR				8-Pin DIP (300 Mil)		Small-Outline SO-8		(400 Mil)	Hermetic
		Input							Single
		On-		Single	Dual	Single	Dual	Single	and Dual
dV/dt	VCM	Current	Output	Channel	Channel	Channel	Channel	Channel	Channel
(V/μs)	(V)	(mA)	Enable	Package	Package	Package	Package	Package	Packages
NA	NA	5	YES	6N137		HCPL-0600		HCNW137
			NO		HCPL-2630		HCPL-0630
5,000	50		YES	HCPL-2601		HCPL-0601		HCNW2601
			NO		HCPL-2631		HCPL-0631
10,000	1,000		YES	HCPL-2611		HCPL-0611		HCNW2611
			NO		HCPL-4661		HCPL-0661
1,000	50		YES	HCPL-2602[1]
3, 500	300		YES	HCPL-2612[1]
1,000	50	3	YES	HCPL-261A[1]		HCPL-061A[1]
			NO		HCPL-263A[1]		HCPL-063A[1]
1,000[2]	1,000		YES	HCPL-261N[1]		HCPL-061N[1]
			NO		HCPL-263N[1]		HCPL-063N[1]
1,000	50	12.5	[3]						HCPL-193X[1]
									HCPL-56XX[1]
									HCPL-66XX[1]

Notes:

1.Technical data are on separate HP publications.

2.15 kV/μs with VCM = 1 kV can be achieved using HP application circuit.

3.Enable is available for single channel products only, except for HCPL-193X devices.

1-147

Ordering Information

Specify Part Number followed by Option Number (if desired).

Example:

HCPL-2611#XXX

020 = 5000 V rms/1 minute UL Rating Option*

060 = VDE 0884 VIORM = 630 Vpeak Option** 300 = Gull Wing Surface Mount Option†

500 = Tape and Reel Packaging Option

Option data sheets available. Contact Hewlett-Packard sales representative or authorized distributor for information.

*For 6N137, HCPL-2601/11/30/31 and HCPL-4661 (8-pin DIP products) only. **For HCPL-2611 only. Combination of Option 020 and Option 060 is not available. †Gull wing surface mount option applies to through hole parts only.

Schematic
					HCPL-2630/2631/4661
	6N137, HCPL-2601/2611				HCPL-0630/0631/0661
						ICC
	HCPL-0600/0601/0611						VCC
IF	HCNW137, HCNW2601/2611			1	IF1		8
		ICC	VCC			IO1
2+				+			VO1
			8
		IO					7
			VO	VF1
			6
				–
VF				2
					SHIELD
–			GND	3
3	SHIELD				IF2	IO2
		7	5	–			VO2
	IE
		VE		VF2			6
USE OF A 0.1 µF BYPASS CAPACITOR CONNECTED				+
BETWEEN PINS 5 AND 8 IS RECOMMENDED (SEE NOTE 5).
				4			GND
					SHIELD
							5

1-148

Package Outline Drawings

8-pin DIP Package** (6N137, HCPL-2601/11/30/31, HCPL-4661)

9.65 ± 0.25

(0.380 ± 0.010)

TYPE NUMBER

8

7

6

5

OPTION CODE*

HP XXXXZ

DATE CODE

YYWW

UR

UL

1

2

3

4

RECOGNITION

1.19 (0.047) MAX.

1.78 (0.070) MAX.

4.70 (0.185) MAX.

0.51 (0.020) MIN.

2.92 (0.115) MIN.

1.080 ± 0.320

0.65 (0.025) MAX.

(0.043 ± 0.013)

2.54 ± 0.25

(0.100 ± 0.010)

7.62 ± 0.25

(0.300 ± 0.010)

6.35 ± 0.25

(0.250 ± 0.010)

5° TYP.				0.254	+ 0.076
					- 0.051
			(0.010		+ 0.003)
					- 0.002)

DIMENSIONS IN MILLIMETERS AND (INCHES).

*MARKING CODE LETTER FOR OPTION NUMBERS "L" = OPTION 020

"V" = OPTION 060

OPTION NUMBERS 300 AND 500 NOT MARKED.

**JEDEC Registered Data (for 6N137 only).

8-pin DIP Package with Gull Wing Surface Mount Option 300 (6N137, HCPL-2601/11/30/31, HCPL-4661)

																													PAD LOCATION (FOR REFERENCE ONLY)
							9.65 ± 0.25																																	1.016 (0.040)
						(0.380 ± 0.010)
																																															1.194 (0.047)
			8					7							6				5
																																																										4.826					TYP.
																																																										(0.190)
																									6.350 ± 0.25
																									(0.250 ± 0.010)																																						9.398 (0.370)
																																																															9.906 (0.390)
		1				2							3					4
																																																																0.381 (0.015)
																													1.194 (0.047)																																			0.635 (0.025)
																													1.778 (0.070)
																		1.780											9.65 ± 0.25
1.19																						(0.070)																						(0.380 ± 0.010)
																								MAX.																					7.62 ± 0.25
(0.047)
																																									(0.300 ± 0.010)
MAX.																																																																			+ 0.076
																																																																	0.254
																																																																			- 0.051
																									4.19			MAX.																																			(0.010				+ 0.003)
																		(0.165)
																																																																			- 0.002)

1.080	± 0.320
(0.043	± 0.013)																								0.635 ± 0.25
																							(0.025 ± 0.010)								12° NOM.
								2.54						0.635		± 0.130
	(0.100)													(0.025		± 0.005)

BSC

DIMENSIONS IN MILLIMETERS (INCHES).

LEAD COPLANARITY = 0.10 mm (0.004 INCHES).

1-149

Small-Outline SO-8 Package (HCPL-0600/01/11/30/31/61)

										8				7					6			5
																								5.842 ± 0.203
																		XXX				(0.236 ± 0.008)
3.937	± 0.127																														TYPE NUMBER
																	YWW
(0.155	± 0.005)
																															(LAST 3 DIGITS)
																															DATE CODE
										1				2					3			4
0.381	± 0.076
(0.016	± 0.003)																											1.270		BSG
																						(0.050)
											5.080 ± 0.127																			7°				45° X		0.432
											(0.200 ± 0.005)																									(0.017)

3.175 ± 0.127

(0.125 ± 0.005) 1.524

(0.060)

0.152 ± 0.051

(0.006 ± 0.002)

DIMENSIONS IN MILLIMETERS (INCHES).	0.305	MIN.
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).	(0.012)

0.228 ± 0.025

(0.009 ± 0.001)

8-Pin Widebody DIP Package (HCNW137, HCNW2601/11)

						11.15 ± 0.15																						11.00
					(0.442 ± 0.006)																							(0.433) MAX.
																											9.00 ± 0.15
	8						7				6				5								(0.354 ± 0.006)
																				TYPE NUMBER
									HP											DATE CODE
					HCNWXXXX
									YYWW
	1						2				3				4
																										10.16 (0.400)
																												TYP.

1.55

(0.061)

MAX. 7° TYP. 0.254 + 0.076 - 0.0051

+ 0.003) (0.010 - 0.002)

																																					5.10 MAX.
																																			(0.201)
																														3.10 (0.122)
																															3.90 (0.154)				0.51 (0.021) MIN.
	2.54 (0.100)
	TYP.
1.78	± 0.15																						0.40 (0.016)														DIMENSIONS IN MILLIMETERS (INCHES).
(0.070	± 0.006)																												0.56 (0.022)

1-150

8-Pin Widebody DIP Package with Gull Wing Surface Mount Option 300 (HCNW137, HCNW2601/11)

						11.15 ± 0.15
					(0.442 ± 0.006)																		PAD LOCATION (FOR REFERENCE ONLY)
																	5
	8						7				6
																																							6.15			TYP.
																																							(0.242)
																				9.00 ± 0.15
																				(0.354 ± 0.006)
																																										12.30 ± 0.30
																																										(0.484 ± 0.012)
	1						2				3					4
																																							0.9
															1.3

(0.051)

(0.035)

1.78 ± 0.15

(0.070 ± 0.006)

																			1.55														12.30 ± 0.30
																						(0.061)																	(0.484 ± 0.012)
																							MAX.																	11.00 MAX.
																																			(0.433)
																								4.00				MAX.
																							(0.158)
																																						1.00 ± 0.15
																	2.54											0.75 ± 0.25								(0.039 ± 0.006)														+ 0.076
(0.100)																												(0.030 ± 0.010)																					0.254 - 0.0051
																																																		+ 0.003)
																	BSC																																(0.010
DIMENSIONS IN MILLIMETERS (INCHES).																																																		- 0.002)
																																														7° NOM.

LEAD COPLANARITY = 0.10 mm (0.004 INCHES).

Solder Reflow Temperature Profile (HCPL-06XX and Gull Wing Surface Mount Option 300 Parts)

TEMPERATURE – °C

260

240

T = 145°C, 1°C/SEC

220

T = 115°C, 0.3°C/SEC

200

180

160

140

120

100

80

T = 100°C, 1.5°C/SEC

60

40

20

0

0

1

2

3

4

5

6

7

8

9

10

11

12

TIME – MINUTES

Note: Use of nonchlorine activated fluxes is highly recommended.

1-151