H
T-13/4 (5 mm), T-1 (3 mm), High Performance, Tinted, Diffused, AlInGaP, and TS AlGaAs Red LED Lamps
Technical Data
•High Light Output Over a Wide Range of Currents
•Popular T-1 and T-1 3/4 Packages
•Choice of Three Colors Amber Reddish-Orange Deep Red
•Wide Viewing Angles
•Long Life: Solid State Technology
•Available on Tape and Reel
•Outdoor Message Boards
•Automotive Lighting
•Portable Equipment
•Medical Equipment
•Changeable Message Signs
The HLMA-D/KXXX series tinted, diffused, solid state lamps utilize the newly developed aluminum indium gallium phosphide (AlInGaP) LED technology. This technology has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. These LED lamps are available with a choice of two colors, 592
HLMA-DX05 Series
HLMA-KX05 Series
HLMP-D1XX Series
HLMP-J100/J150 Series
nm amber and 615 nm reddishorange, and with two viewing angles, 65° and 60°.
The HLMP-D/JXXX series tinted, diffused solid state lamps utilize the highly optimized transparent substrate aluminum gallium arsenide (TS AlGaAs) LED technology. This technology has a very high luminous efficiency,
|
Viewing |
|
Reddish- |
Deep |
|
|
Angle |
Amber |
Orange |
Red |
Package |
Package Description |
2θ1/2 |
λd = 592 nm |
λd = 615 nm |
λd = 644 nm |
Outline |
T-13/4 (5 mm), Tinted, Diffused, |
65° |
HLMA- |
HLMA- |
|
A |
Standard Current |
|
DL05 |
DH05 |
|
|
T-1 (3 mm), Tinted, Diffused, |
60° |
HLMA- |
HLMA- |
|
B |
Standard Current |
|
KL05 |
KH05 |
|
|
T-13/4 (5 mm), Tinted, Diffused, |
40° |
|
|
HLMP- |
A |
Standard Current |
|
|
|
D115 |
|
T-13/4 (5 mm), Tinted, Diffused, |
25° |
|
|
HLMP- |
A |
Standard Current |
|
|
|
D120 |
|
T-1 (3 mm), Tinted, Diffused, |
55° |
|
|
HLMP- |
C |
Standard Current |
|
|
|
J100 |
|
T-1 (3 mm), Tinted, Diffused, |
55° |
|
|
HLMP- |
C |
Diffused, Low Current |
|
|
|
J150 |
|
5964-9287E |
1-49 |
capable of producing high light output over the wide range of drive currents from 500 μA to 50 mA. The color is deep red at a
dominant wavelength of 644 nm. TS AlGaAs is a flip-chip LED technology, die attached to the anode lead and wire bonded to
the cathode lead. Available viewing angles are 25°, 40°, and 55°.
5.08 (0.200)
4.57 (0.180)
9.19 (0.362)
8.43 (0.332)
|
0.89 (0.035) |
|
6.35 (0.250) |
|
|
|
|
5.58 (0.220) |
|
||
|
0.64 (0.025) |
|
|
|
|
|
CATHODE |
|
|
||
|
|
|
|
|
|
|
|
|
|
24.13 |
|
25.40 |
|
|
|
||
MIN. |
|
|
(0.95) MIN. |
|
|
(1.00) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CATHODE
1.27( 0.050) NOM. |
1.27 |
NOM. |
|
(0.050) |
0.45 (0.018) SQUARE
NOMIMAL
6.10 (0.240)
5.59 (0.220)
CATHODE
2.54 (0.100) NOM.
A
NOTES:
1.ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2.AN EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS.
3.18 (0.125)
3.18 (0.125) 2.67 (0.105)
2.67 (0.105)
3.43 (0.135)
3.43 (0.135) 2.92 (0.115)
2.92 (0.115)
|
|
|
|
|
|
|
|
|
|
|
4.70 (0.185) |
|
|
||
|
|
|
|
6.35 (0.250) |
|
|
|
|
|
|
|||||
|
|
4.70 (0.185) |
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
4.19 (0.165) |
|
|
|||||
|
|
4.19 (0.165) |
|
5.58 (0.220) |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
1.02 |
|
|
|
|
|||||||
1.02 |
|
|
|
|
|
||||||||||
|
(0.040) NOM. |
|
|
|
|
|
(0.040) NOM. |
|
|
|
|||||
|
0.45 SQUARE NOMINAL |
0.45 |
|
|
|
|
|||||||||
(0.018) |
|
(0.018) |
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
SQUARE |
|
|
|
|||
|
|
|
|
|
|
|
|
|
NOMINAL |
|
24.13 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
(0.95)MIN. |
||
|
ANODE |
ANODE |
CATHODE |
|
|||||||||||
2.54 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(0.100)NOM. |
2.54 |
|
NOM. |
1.27 |
NOM. |
|||||||||
|
|
|
|
|
(0.050) |
||||||||||
|
|
|
|
(0.100) |
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B C
Absolute Maximum Ratings at TA = 25°C
|
HLMA- |
HLMA- |
|
HLMA- |
HLMA- |
|
Parameter |
DL05 |
DH05 |
|
KL05 |
KH05 |
Units |
|
|
|
|
|
|
|
DC Forward Current[1,3,4] |
50 |
50 |
|
50 |
50 |
mA |
Peak Forward Current[2] |
200 |
200 |
|
200 |
200 |
mA |
Average Input Power[2] |
103 |
103 |
|
103 |
103 |
mW |
Reverse Voltage (IR = 100 μA) |
5 |
5 |
|
5 |
5 |
V |
Operating Temperature Range |
-40 to |
-40 to |
|
-40 to |
-40 to |
°C |
|
+100 |
+100 |
|
+100 |
+100 |
|
|
|
|
|
|
|
|
Storage Temperature Range |
-55 to |
-55 to |
|
-55 to |
-55 to |
°C |
|
+100 |
+100 |
|
+100 |
+100 |
|
|
|
|
|
|
|
|
Junction Temperature |
|
|
110 |
|
°C |
|
Soldering Temperature |
|
|
260°C for 5 second |
|
||
[1.59 mm (0.06 in.) below seating plane] |
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes:
1.Derate linearly as shown in Figure 4.
2.Any pulsed operation cannot exceed the Absolute Max Peak Forward current as specified in Figure 5.
3.Drive currents between 10 mA and 30 mA are recommended for best long term performance.
4.Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative.
1-50
Optical Characteristics at TA = 25°C
|
Luminous |
|
Color, |
Viewing |
|
||
|
Intensity |
Peak |
Dominant |
Angle |
Luminous |
||
|
IV (mcd) |
Wavelength |
Wavelength |
2 θ1/2 |
Efficacy |
||
Part Number |
@ 20 mA[1] |
λpeak (nm) |
λd[2] (nm) |
Degrees[3] |
ηv |
||
HLMA- |
Min. |
|
Typ. |
Typ. |
Typ. |
Typ. |
(lm/w) |
|
|||||||
|
|
|
|
|
|
|
|
DL05 |
35 |
|
100 |
594 |
592 |
65 |
480 |
|
|
|
|
|
|
|
|
DH05 |
35 |
|
100 |
621 |
615 |
65 |
263 |
|
|
|
|
|
|
|
|
KL05 |
35 |
|
100 |
594 |
592 |
60 |
480 |
|
|
|
|
|
|
|
|
KH05 |
35 |
|
100 |
621 |
615 |
60 |
263 |
|
|
|
|
|
|
|
|
Notes:
1.φv is the total luminous flux output as measured with an integrating sphere.
2.The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3.θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Electrical Characteristics at TA = 25°C
|
Forward |
Reverse |
Capacitance |
|
Speed of Response |
||||
|
Voltage |
Breakdown |
C (pF) |
|
τs (ns) |
||||
Part |
VF (Volts) |
VR (Volts) |
VF = 0, |
Thermal |
Time Constant |
||||
Number |
@ IF = 20 mA |
@ IR = 100 μA |
f = 1 mHz |
Resistance |
e-t/τs |
||||
HLMA- |
Typ. |
|
Max. |
Min. |
|
Typ. |
Typ. |
RθJ-PIN (°C/W) |
Typ. |
|
|
||||||||
DL05 |
1.9 |
|
2.4 |
5 |
|
25 |
60 |
260 |
13 |
|
|
|
|
|
|
|
|
|
|
DH05 |
1.9 |
|
2.4 |
5 |
|
25 |
60 |
260 |
13 |
|
|
|
|
|
|
|
|
|
|
KL05 |
1.9 |
|
2.4 |
5 |
|
25 |
60 |
290 |
13 |
|
|
|
|
|
|
|
|
|
|
KH05 |
1.9 |
|
2.4 |
5 |
|
25 |
60 |
290 |
13 |
|
|
|
|
|
|
|
|
|
|
|
1.0 |
|
|
|
|
|
|
|
|
AMBER |
|
|
|
REDDISH-ORANGE |
|
INTENSITY |
0.5 |
|
|
|
|
|
|
RELATIVE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0 |
|
|
|
|
650 |
700 |
|
550 |
594 |
600 |
621 |
630 |
WAVELENGTH – nm
Figure 1. Relative Intensity vs.
Wavelength.
|
200 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
– mA |
180 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
160 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
CURRENT |
100 |
|
|
|
|
|
|
|
|
|
|
140 |
|
|
|
|
|
|
|
|
|
FORWARD |
120 |
|
|
|
|
|
|
|
|
|
40 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
80 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
– |
60 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
20 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
I |
|
|
|
|
|
|
|
|
|
|
F |
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.0 |
1.5 |
2.0 |
2.5 |
3.0 |
VF – FORWARD VOLTAGE – V
Figure 2. Forward Current vs. Forward Voltage.
1-51