Haier HRF-628IF6 Operating Instructions

HRF-628A*6

HRF-628I*6

*=F,S,T,W,N,X,CR,

BB,GW,GB,GR

GB	Refrigerator
	User Guide
D	Kühlschrank
	Bedienungsanleitung
F	Réfrigérateur
	Mode d'emploi
I	Frigorifero
	Guida per l'utente
E	Frigorífico
	Manual del usuario
NL	Koelvriescombinatie
	Handleiding
PL	Lodówka
	Podręcznik użytkownika
RO	Congelator
	Manual de utilizare
CZ	Chladnička
	Uživatelská příručka
HU	Hűtőszekrény
	Felhasználói útmutató

GB

D

F

I

E

NL

PL

RO

CZ

HU

Contents

1. Before You Start	1
Safety	1
Refrigerant Gas Information	2
Caring for the Environment	2

2. About Your Refrigerator	3
About the Fresh Food Compartment	5
About the Freezer Compartment	6
The Icemaker/Water Dispenser	7
Home bar	7
Fridge-Freezer Operation	9
Operating the Water and Ice Dispenser 12
Safety	12
Automatic Defrosting	12
Alarm Function	12
Display Power Down	12

5.	Cleaning and Maintenance	19
	Defrosting	19
	Cleaning	19
	Shutting Off the Refrigerator	19
	When Not in Use	19
	Water Filter	19
6.	Troubleshooting	20
7.	Technical Data	23

3.	Food Storage Tips	13
	Tips on Storing Fresh Food	13
	Tips on Freezing Food	14
4.	Installation	15
	Positioning Your Appliance	15
	Removing and Installing the Doors	16
	Levelling the Fridge-freezer and	17
	Adjusting the Doors
	Fitting the Handles	17
	Electrical Supply Connection	17
	Water Supply Connection	18

GB

Before start-up,be sure to read the User’s Guide. Keep the User’s Guide in a safe place.

Keep ventilation openings,in the appliance enclosure or in the built-in structure,clear of obstruction. Do not use mechanical devices or other means to accelerate the defrosting process,other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the appliance,unless they are of the type recommended by the manufacturer.

Due to our policy of continual improvement,we reserve the right to change specifications without prior notice.

1. Before You Start

Thank you for buying this fridge freezer appliance. We hope that it provides a stylish and practical solution to your cooling needs. Please read this manual before using your new fridge freezer. Please keep this manual safe and pass it onto any new owner. We hope that this manual supplies all the information you require. If there is anything you are unsure of please contact us (see the Warranty section for Customer Care details).

!WARNING! This appliance must be earthed .

!Please leave the appliance to stand for at least six hours. This will allow the cooling system to settle following transportation.

!Always make sure a qualified person installs this appliance.

!The freezer compartment is rated at 4 stars.

!This appliance is designed for domestic use only. Using it for any other purpose could invalidate any warranty or liability claim.

•Before you plug the appliance into the mains, clean the inside of the appliance using warm water and bicarbonate of soda, then dry thoroughly.

•Check that no parts of the appliance are damaged, especially parts of the cooling system, pipes or leads. If damage has occurred, DO NOT install the appliance; you should contact a qualified service engineer or contact Customer Care.

•If the accessories inside the appliance have been disturbed during transit, reposition them in accordance with the instructions.

•Make sure that the electrical supply to your socket is correct for this appliance – the required power information is on the data label of the appliance. The data label is located inside the appliance (top of refrigerator compartment).

•Once the appliance is installed, cleaned dry, and has been allowed to stand following transportation, it is ready to be plugged in and switched on.

•When replacing old appliances, make sure that you have disabled any locking mechanisms before disposal

– it may even be best to remove the appliance door completely to prevent children from becoming trapped inside the appliance.

•The appliance must be connected to the power supply safely. Loose connections, broken plugs and bare wires are a safety hazard. Make sure that all connections are sound.

•Before undertaking any routine maintenance or minor repairs, disconnect the appliance from the electrical supply. This includes cleaning and changing light bulbs.

•DO NOT touch cold surfaces of the appliance while it is in use as this will cause hands to stick to them leading to freezer burns.

•When moving the appliance take care not to damage the leads, pipes or condenser unit. Should these parts become damaged, contact a qualified service engineer.

•Effervescent liquids (fizzy drinks) should never be frozen. These liquids expand during freezing and this may lead to the bottles/containers shattering or exploding.

•Foods that are intended to be defrosted or cooked first, such as breads or meats, must not be eaten in their frozen state.

•If food looks or smells strange, do not attempt to eat it. If in doubt throw it away.

•Never use sharp, metal implements to scrape ice off the surface of this appliance. Only use implements, which are fit for this purpose (such as plastic scrapers) and use carefully to avoid damaging the lining of the appliance.

•The cooling system contains refrigerant and oils, all of which are harmful to health if leaked. Should leakage occur, disconnect the appliance and ventilate the room. Make sure that you do not get any coolant near to, or in, your eyes.

Contact a service engineer or arrange to have the appliance removed.

Safety

!WARNING! Use drinking water only with this appliance.

!WARNING! Keep this appliance clear of any obstruction.

!DO NOT damage the refrigerant circuit. If it does become damaged, do not use the appliance.

!WARNING! DO NOT use mechanical devices (such as hair dryers) to defrost this appliance.

!WARNING ! The water and ice pipework MUST be flushed through before use. Refer to the Icemaker/Water Dispenser section of this manual.

Electrical Safety

•Connections to the mains supply should be in accordance with local regulations.

•The plug MUST be accessible after the appliance has been positioned.

•Make sure that the refrigerator does not trap the electric cable.

•Do not step on the cable.

•Avoid damage to the electric cable when moving the refrigerator.

Damaged electrical cable

refrigerator and consult an authorised agent for replacement.

1

Refrigerant Gas Information

IMPORTANT:This appliance is provided with refrigerant gas, ISOBUTHANE (R600a). When moving the appliance take care to ensure that it is not excessively struck or shaken. Failure to do so could damage the appliance.

Damage to the refrigerating circuit, with possible leaking of refrigerating gas, could create a risk of explosion caused by

Caring for the Environment

Disposing of Your Packaging

Your new refrigerator was protected by suitable packaging while on its way to you. All of the materials used are environmentally friendly for disposal and can be recycled. Please make a contribution to protecting the environment by disposing of the packaging appropriately.

GB

In the Event of Accidental Leakage

Allow the material to evaporate providing that adequate ventilation is provided.

Behaviour of the Gas

Gas R600a is heavier than air: if released it forms a high

First Aid

Inhalation

Take the exposed person from the polluted area and carry them to a warm, well ventilated place.

Long exposure can cause the onset of asphyxia and

respiration, and in the most serious cases, administer oxygen under close medical supervision.

Skin contact

It is unlikely that occasional contact with the skin is dangerous. If this should happen thoroughly wash the

Liquid splashes and atomised liquid can cause freezing burns.

to treat any burns.

Eye contact

Wash with plenty of water, with eyelids well open, and call a specialist doctor as soon as possible.

In any event, should you inhale or come into contact with R600a gas, we advise you to consult your own doctor.

Disposing of Your Old Refrrigerator

This symbol on the product or its packaging

indicates that the product may not be treated as household waste. Instead it should be handed

over your local community waste collection/

recycling centre.

Old appliances still have some residual value. An environmentally friendly method of disposal will ensure that valuable raw materials can be recovered and used again.

When an appliance has reached the end of its working life

of it together with the plug.

the door so that children cannot accidentally lock themselves in.

ozone, is used as an expander for the insulating foam.

When transporting the appliance, take care not to damage the cooling circuit.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused.

For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

2

2. About Your Refrigerator

Fig.2-1(HRF-628I*6)
Freezer compartment	1	12
2
3
4
5
6
7
	8	9

Fridge compartment

10

11

10

11

10

The HRF-628I*6 (Fig.2-1) has the following features:

1.Ice cream shelf

2.Ice bin with ice maker (inside bin)

3.Water and ice dispenser

4.Freezer LED light

5.3 freezer storage shelves

6.Freezer LED light (behind drawer)

7.2 freezer door bins

8.2 freezer drawers

9.2 crisper drawers

10.4 fridge door bins

11.4 fridge storage shelves

12.Fridge LED light

CFC free and frost free

Super-freeze, super-cool and holiday options Automatic temperature display

Excessive temperature and door ajar alarms

3

Fig.2-2(HRF-628A*6)
Freezer compartment	1	13
2
3
4
5
6
7
	8	9

GB

Fridge compartment

10

12

11

12

10

The HRF-628A*6 (Fig.2-2) has the following features:

1.Ice cream shelf

2.Ice bin with ice maker (inside bin)

3.Water and ice dispenser

4.Freezer LED light

5.3 freezer storage shelves

6.Freezer LED light (behind drawer)

7.2 freezer door bins

8.2 freezer drawers

9.2 crisper drawers

10.2 fridge door bins

11.Home bar inner cover

12.4 fridge storage shelves

13.Fridge LED light

CFC free and frost free

Super-freeze, super-cool and holiday options Automatic temperature display

Excessive temperature and door ajar alarms

4

Fig.2-3

4

5

6

7

8

Fig.2-4

Shelf

Shelf runner

About the Fresh Food Compartment

It is recommended to leave storage space between the foods for good cold air circulation. The temperatures in the refrigerator are slightly warmer near the top and colder near the base.

1	Foods that are likely to perish quickly should be placed
	towards the rear of the appliance – where it is coolest.

Suggestions for storage(Fig.2-3):

1.	Eggs, butter, cheese, etc.
2.	Tins, cans, condiments, etc.
2	Drinks and all kinds of bottled foods.
3.
4.	Pickled foods, drinks or cans.

5.

6.Flour foods, cans, dairy, etc.

7.Cooked meats, sausage, etc.

8.Fruits, vegetables or salads.

Shelves

3

needs.

The shelves will not pull out accidentally when you remove

!

any food placed on the shelf.

Shelves

To remove the shelf, tilt the front upwards so that the restraining pegs are clear of the side guides (Fig.2-4) and pull towards you. Keep the shelf tilted to allow the retaining stops to clear the side guides.

When repositioning, make sure the shelf is pushed back fully and the retaining stops have located securely.

The Light

The LED interior light comes on when the door is opened.

appliances other settings.

5

About the Freezer Compartment

The freezer compartment consists of three drawers, an ice cream shelf, two glass shelves and three door shelves (Fig.2-5).

As with the fridge, certain areas of the freezer are better for storage of certain foods.

Ice creams and water ices are best stored the ice cream shelf or towards the rear of the appliance where it is coldest.

Large/heavier portions of food, such as meats joints for roasting are best stored in the drawers at the bottom of the appliance, while less weighty items should be stored on the shelves – this is to prevent damage to the appliance.

You should always make sure that food stored is suitable for freezing, and that you have stored it securely inside the appliance.

!Please keep the distance more than 10 mm between the food placed and the sensor to ensure the cooling effect.

!Please keep the lowest drawer when the refrigerator working in order to ensure the cooling effect.

Shelves

To remove the shelf, tilt the front upwards so that the restraining pegs are clear of the side guides (Fig.2-5) and pull towards you. Keep the shelf tilted to allow the retaining stops to clear the side guides.

When repositioning, make sure the shelf is pushed back fully and the retaining stops have located securely.

The Light

The LED interior lights comes on when the door is opened.

appliances other settings.

Defrosting Food for Cooking

Should food become partially thawed or defrosted, it should be consumed as soon as possible as the quality will be

!Always make sure that food is thoroughly defrosted before cooking and no ice crystals remain. This

is especially important for poultry, as this can be extremely harmful to health.

Always follow the defrosting instructions on packaging when defrosting ready meals – manufacturers’ guidelines are always best, as some frozen foods should be cooked from frozen.

Fig.2-5

GB 1

2

3

Sensor

4

5

1.	Ice cream shelf	4.	Storage drawers
2.	Ice bin	5.	Door bins

3.Storage shelves

Fig.2-6

Shelf

Shelf runner

6

Fig.2-7

Fig.2-8

Fig.2-9

Fig.2-10

The Icemaker/Water Dispenser

Precautions

•NEVER expose the water pipe to temperatures below 0°C to avoid freezing.

•Test the tubing for leaks by flushing the tube through with water, until the water runs clear.

•After the appliance has been sited into the location of your choice, make sure that the water tube is arranged so it does not incur damage through bends and kinks and is clear of any heat sources.

•Once the temperature inside the freezer is at –12°C ice production will begin.

•DO NOT over use the icemaker. If you attempt to use the ice cube button too often it will go into a shut down mode. This is perfectly normal and requires you to wait for one hour before attempting to re-use it.

•DO NOT use delicate or fragile glassware.

•DO NOT touch the ice cube outlet with your hands, or any implements to avoid injury or damage.

•DO NOT manually add water – this is an automatic water system. If the ice maker is turned on but the appliance is not connected to water, the ice maker will not work.

How the Icemaker Works

result in lab under the 32°C ambient temperature condition).

ambient temperature and water pressure, the ice making

Do not store ice cubes, which are produced during the

prolonged break. Discard these cubes.

need to manually arrange the ice cubes periodically.

Some ice cubes may stick together when dropped into the storage box – you will need to separate these to allow maximum use of the icebox.

Home Bar

•To open the bar, press the compartment button(Fig.2-7). The bar compartment opens.

The home bar can be used without opening the appliance door which saves energy.

When the home bar is opened, the refrigerator light comes on.

•You can place drinks and other foods in the home bar(Fig.2-8).

•Do not remove the inner cover of the home bar(Fig.2-9).

The home bar will not operate if the cover has been removed.

•Keep children away from the home bar(Fig.2-10).

Otherwise children could be injured and the home bar damaged.

!Close the home bar as soon as possible to keep the cold inside the appliance. The warning system is activated if the door is not properly closed.

7

First use of the Icemaker / Water Dispenser

!DO NOT of water, as there may be dust and / or impurities within the water pipes.

This will make sure that the pipes are cleared. If in doubt, keep re-using the dispenser until the water runs clear.

Noises during Ice Making

The ice making process can be noisy. You may hear ice being dropped into the storage compartment. This is perfectly normal.

Storing Ice for ExtendedPeriods

Ice, which is stored for a long period of time, may go an opaque colour and have a strange odour. We recommend that you dispose of this ice, remove and clean the icebox. Allow the tray to dry thoroughly and cool down before replacing into the appliance to prevent ice from sticking.

Preventing Ice from Being Made

If you do not require any ice over a prolonged period of time

water supply and the appliance. It is recommended that you clean the icebox, dry it carefully and replace it back into the appliance – this will prevent any odours being produced.

Installing and Removing the Ice Cube Storage

Drawer

To remove the icebox, lift the middle of the drawer and then pull it out, releasing the unit(Fig.2-11).

Note: Water moisture may have condensed and frozen the icebox in place.

mechanism 90° clockwise(Fig.2-12). Reinstall the icebox,

If the Ice Maker does not Work Properly

The volume of the icebox equals the quantity of ice cubes, which the appliance can make in one day. Occasionally small number of ice cubes may remain inside the box. If the ice gets stuck, this will result in abnormal operation of the ice cube maker. To avoid this problem, remove the icebox and rearrange the ice cubes, and remove the ice cubes which cannot be separated.

!Always keep the ice cube outlet clean and clear of obstructions.

!If you take out the icebox,you will get extra space for food storage,please install the additionally provided bottle holder at the position above the inlet on the freezer door for easy food storage(Fig.2-13).

Fig.2-11

GB

Icebox

Icebox

Fig.2-12

Cam mechanism

Fig.2-13

Bottle holder

8

Fridge-Freezer Operation

			G			H		I
A
	Disp									Ice
	-enser									On/Off
		Water Crushed Cubed				Filter		Ice on
										Sec.

C	Frz.	Ref.
	Temp	Temp

		Func.						OK
	E	Set
					Holiday		Lock
		S-Cool S-Frz.
								Sec.
		J K			L		M

Fig.2-14

B

D

F

A – Dispenser selector button B – Ice maker on/off button

C – Freezer temperature button D – Fridge temperature button E – Function selector button

F – Function confirm button	K – Quick freezing icon
G – dispenser status icon	L – Holiday mode icon
H – Filter change status icon	M – Lock icon
I – Ice maker on status icon
J – Quick chill icon

The water and ice dispenser digital display and function buttons are shown in Fig.2-14.

9

!WARNING!

You cannot adjust the appliance temperature settings under Quick Freeze mode or Lock mode.

If you try to adjust the settings under these modes,

the special function icon beside the freezer temperature display icon will blink, along with the beep sound to indicate that you cannot adjust the temperature at that time.

Fig.2-15

Disp				Ice
-enser				On/Off
				Sec.
Frz.				Ref.
Temp	21			Temp
Func.				OK
Set
			Lock
				Sec.

Fig.2-16

	Disp	Ice
	-enser	On/Off
1		Sec.	2
	Frz.	Ref.
	Temp	Temp
		21

	Func.	OK
	Set
		Holiday
		Sec.

Fig.2-17

	Disp	Ice
	-enser	On/Off
1		Sec.	2
	Frz.	Ref.
	Temp	Temp
		21

	Func.	OK
	Set
		S-Cool
		Sec.

	Lock Mode
	This feature will lock the temperature and function settings.	GB
	When locked, the lock icon will blink and a beep will sound.
	To lock
	Press and hold the ‘OK’ button for 3 seconds (Fig.2-15).
	The LOCK icon will switch on and the refrigerator will lock.
	To unlock
	Press and hold the ‘OK’ button for 3 seconds. The LOCK
	icon will switch off and the refrigerator will unlock.
	Holiday Mode

!WARNING ! Before selecting Holiday Mode remove all food and drink from the fridge compartment as is maybe unsafe to eat or drink after a short period of time.

This feature allows you to leave the fridge section unused while the freezer section operate as normal. When in this mode, the fridge will be automatically set to 17 °C.

To turn on

1.Press the ‘FUNC.SET’ button until Holiday mode is selected (Fig.2-16).

2.Now press the ‘OK’ button: the HOLIDAY mode icon will turn on.

To turn off

1.Press the ‘FUNC.SET’ button until Holiday mode is selected.

2.Now press the ‘OK’ button: the HOLIDAY mode icon will turn off.

Quick Cool Mode

This function is to chill food quickly so that the food remains fresh for as long as possible. Use this feature before putting large quantities of food in to the fridge chamber at any one time.

The Quick Cool mode will turn off once it has reached the set temperature.

To turn on

1.Press the ‘FUNC.SET’ button until Quick Cool mode is selected (Fig.2-17).

2.Now press the ‘OK’ button: the S-COOL icon will turn on.

To turn off

1.Press the ‘FUNC.SET’ button until Quick Cool mode is selected.

2.Now press the ‘OK’ button: the S-COOL icon will turn off. Quick Cool mode is now turned off.

10

Quick Freeze Mode

This function is designed to freeze food completely in the shortest possible time to maintain the nutrients within the

food.		Disp				Ice
		-enser				On/Off
						Sec.
The Quick Freeze mode will turn off once it has reached the	1	Frz.				Ref.
set temperature.		Temp	21			Temp
		Func.				OK
		Set
					S-Frz.
Use this feature before putting large quantities of food in to
						Sec.
the freezer chamber at any one time. We recommend that
you turn on the Quick Freeze mode 12 hours in advance, as
this will lower the temperature in the freezer compartment
before you place any food in it.
		Disp				Ice
		-enser				On/Off

Sec.

To turn on

1.Press the ‘FUNC.SET’ button until Quick Freeze mode is selected (Fig.2-18).

2.Now press the ‘OK’ button: the S-Frz. icon will turn on.

To turn off

1.Press the ‘FUNC.SET’ button until Quick Freeze mode is selected.

2.Now press the ‘OK’ button: the S-Frz. icon will turn off. Quick Freeze mode is now turned off.

Adjusting the Fresh Food Temperature

Press the ‘Ref. Temp’ button (Fig.2-19). The fridge temperature display will start blinking, which means the fridge is in the temperature setting mode.

Press the ‘Ref. Temp’ button to scroll, in turn, through the fridge temperature range from 09 °C through to 01 °C.

Without any further operation in 5 seconds, the blinking will stop and the temperature will be set. The temperature will also stay still at the time you press any other button during the blinking.

Adjusting the Freezer Temperature

Press the ‘Frz. Temp’ button (Fig.2-20). The freezer temperature display will start blinking, which means the freezer section is in the temperature setting mode.

Press the ‘Frz. Temp’ button to scroll, in turn, through the freezer temperature range from –14 °C through to –24 °C.

Without any further operation in 5 seconds, the blinking will stop and the temperature will be set. The temperature will also stay still at the time you press any other button during the blinking.

	Frz.	Ref.
	Temp	Temp
		21
	Func.	OK
	Set
		Sec.

Disp				Ice
-enser				On/Off
				Sec.
Frz.				Ref.
Temp	21			Temp
Func.				OK
Set
				Sec.

Fig.2-18

2

Fig.2-19

Fig.2-20

11

Operating the Water and Ice Dispenser

This fridge-freezer has three options available – cool water, crushed ice and cubed ice.

To avoid spillages, ALWAYS make sure that you hold your glass up to the dispenser before making your selection. We recommend using a 80 mm wide cup or larger when taking ice from the dispenser.

Ice Maker On/Off Setting

When the fridge-freezer is first powered on, the ice maker defaults to off.

To turn on

•Press the ‘ICE MAKER ON/OFF’ button for 3 seconds. The Ice Maker On icon will turn on and the ice maker will start working.

To turn off

•Press the ‘ICE MAKER ON/OFF’ button for 3 seconds.

The Ice Maker On icon will turn off and the ice maker will stop working.

IMPORTANT: Make sure that you empty the ice maker container before you turn off the ice maker, as the ice will melt into water.

Cool Water Supply

1.Hold the glass to the dispenser.

2.Press the Dispenser Selector button to select cool water. The WATER icon will illuminate.

3.Slightly push the glass onto the lever switch and cool water will dispense into the glass.

Crushed Ice Supply

1.Hold the glass to the dispenser.

2.Press the Dispenser Selector button to select crushed ice. The CRUSHED icon will illuminate.

3.Slightly push the glass onto the lever switch and crushed ice will dispense into the glass.

Cubed Ice Supply

1.Hold the glass to the dispenser.

2.Press the Dispenser Selector button to select ice cubes. The CUBED icon will illuminate.

3.Slightly push the glass onto the lever switch and ice cubes will dispense into the glass.

Changing The Water Filter

When the Filter Change Status Icon turn on,it is indicating that the water filter requires changing(approximately every 6 months).After finishing the change,press Function Selector button for 3 seconds,Filter Change Status Icon will disappear.

Safety

!DO NOT use excessively deep, narrow, fragile or

delicate glasses. GB

•Hold the glass as close as possible to dispenser to avoid spilling water, dropping ice or blockages in the ice cube dispenser.

•Five seconds after the final delivery of ice or water, the dispenser flap will close with a ‘phutt’ sound. Hold the glass still for a further 2-3 seconds (for ice), 1-2 seconds (for water) after you have filled your glass and released the lever switch as additional water or ice may be produced.

•Regularly clean the dispenser.

•To maintain water quality, the filter will need replacing from time to time. We recommend that the water filter

is replaced every 6 months . However, if the water quality show signs of deterioration, either visually or in taste, then the filter should be changed sooner.

•Crushed ice may be dispensed instead of cubed ice if crushed ice was the last option selected.

!NEVER place canned drinks or foods inside the dispenser, as this will damage the crushing mechanism.

!DO NOT touch the dispenser, or remove the icemaker cover to prevent accidental injury or damage to the appliance.

•First supply of water (seven glass approx) and ice cubes (20 pieces approx) should not be consumed after initial start up or following a lengthy break in use. Dispose of these accordingly.

•Do not place ice cubes, which have not been produced by the icemaker into the storage drawer to prevent damage to the mechanism.

•Insufficient water supply may lead to small ice cubes. Excessive water supply may lead to larger cubes, which may stick together, cause leaks and block the dispenser. You should adjust the tap or contact a service engineer.

Automatic Defrosting

There is no need to defrost the refrigerator as this appliance has automatic defrost.

!DO NOT use mechanical devices to accelerate the defrosting process – unless they are of a type recommended by the manufacturer.

Alarm Function

If you leave a door open for a long time or close a door inappropriately, the fridge-freezer will beep at regular intervals, to remind you to close the door properly.

Display Power Down

fridge-freezer is used again.

12

3. Food Storage Tips

Tips on Storing Fresh Food

• Keep your fridge temperature below 5 .

•'Best before' and 'use by' dates.Food with a "use by" date goes off quite quickly. It can be dangerous to eat after this date. Food with a "best before" date is longer-lasting. It should be safe to eat but may not be at its best quality after this date.

•Make sure that food that have been cooked and require chilling, are at room temperature before placing them into the fridge freezer. Make sure that these foods are stored in suitable containers.

•Foods stored in the refrigerator should be washed and dried before storing.

•Some food are best left wrapped in the manufactures original packaging when put in the refrigerator. If unwrapped, it is recommended that the food should be re-wrapped, so that the water cannot evaporate. Some fruit and vegetables keep fresher and food smells will not mix if wrapped.

•Stored foods can be marked in bags or containers.

•Foods eaten daily should be stored at the front of the shelf.

•Make sure that food is stored systematically (raw meats with raw meats, dairy with dairy) to avoid flavour transfer and cross contamination. Raw meats should be stored at the bottom of the fridge to prevent the possibility of it dripping onto uncooked food. Other foods should be stored above raw meat.

•When storing food in the fresh food section always make sure there is adequate space for airflow circulation. This helps to maintain the shelf life of the food.

•When storing food in the refrigerator make sure that foods are not too close to the rear wall to avoid the risk of freezing.

•It is suggested for radishes and other root vegetables to trim the leaves. This keeps the nutrition in the root and not absorbed by the leaves.

•Put frozen foods into the fresh food area to let them defrost. The low temperature of the refrigerator reduces the formation of bacteria and extends food life.

•Some foods like onions, garlic, bananas and root vegetables are better stored at room temperature than in the fridge.

•Melon, pineapples and bananas can go directly into the freezer after preparing, for storage over a longer period.

•Packaging fresh foods properly, using the correct temperature and taking into account food hygiene, will enhance the quality of fresh foods stored within this appliance.

•Use plastic bags, aluminium foil or other food wraps to cover fresh foods not in packaging to prevent flavour transfer and prevent contamination.

•Before storing items in multi-packs (i.e. yoghurt) remove any excess packaging.

!

explosive inside the appliance.

•Beverages with high alcohol content should be stored vertically in tightly sealed bottles.

•Delicate foods should be stored in the coolest part of the appliance.

•Try not to open the door too often.

•Set the thermostat to make sure that foods remain suitably cold; try to avoid freezing within the fridge. Using a thermometer will help you to judge how cool the appliance is. Place it into a glass of water and leave it inside the appliance for several hours to get a reliable reading.

•Some foods contain natural oils and acids (e.g. citric acid) which can damage plastics if spilled – make sure these foods are suitably contained.

•Unpleasant odours inside the fridge are a sign that something has spilled and cleaning is required. Using warm water with bicarbonate of soda will clean the interior of the appliance and remove most spillages (see ‘Cleaning and Maintenance’).

•Always remember to remove perishable foods from this appliance before taking prolonged trips of holidays.

13

	Tips on Freezing Food		• When storing commercially frozen foods, please
	• As with storing fresh foods, suitable packaging, correct		follow these guidelines:
	temperature and food hygiene will enhance the quality		• Always follow manufacturers’ guidelines for
	of the food you are freezing.		the length of time you should store food for.
	• Avoid putting hot foods into the freezer. First let them		Do not exceed these guidelines!
	cool until they reach room temperature.		• Try to keep the length of time between
	• Make sure that all foods for freezing are of a high quality,		purchase and storage as short as possible
	and suitable for freezing.		to preserve food quality.
	• Use packaging material that is odourless and airproof		• Buy frozen foods, which have been stored at
	(such as plastic bags) to store food in so different foods		a temperature of –18 °C or below.
	can be mixed without affecting the quality. Make sure that		• Avoid buying food which has ice or frost on
	it is airtight. Leaking packaging will dehydrate the products		the packaging – This indicates that the
	and lead to loss of beneficial vitamins.		products might have been partially defrosted
	• Keep the surface of the packaging dry – this keeps the		and refrozen at some point – temperature
	packs from freezing together.		rises affect the quality of food.
	• Mark packages with the kind of food contained and the		• Should there be a power cut, or the fridge /
	date of storage.		freezer fail for any length of time, for more
	• Food needs to be frozen quickly, so it is best to freeze		than 3 hours, you may need to remove food
	small portions whenever possible and ensure that they		from the freezer and if possible store in
	are as cold as possible before storage. The recommended		another working freezer or a cold, hygienic
	maximum weight for each portion is 2.5 kg.		place (i.e. garage or out house area) until
	• Keep food which is fresh away from food which is already		the power is restored, or the appliance is
	frozen, if you need to freeze fresh food every day, make		repaired. To prevent undue temperature rise
	sure that it is in small portions to prevent this.		you should store the food in a cool box or
	• Do not exceed the maximum load for freezing – which is		wrap the food in layers of insulating material,
	given as 10 kg / 24-hours (see data badge for details).		such as newspaper, to help to maintain the
	• Write the expiry date and food names on the outside of the		temperature.
	packaging so you can be assured of the food type and		It is important that any food that defrosts
	when it is safe to eat.		should be either consumed, or cooked and
	• Take food from the freezer to defrost when needed.		refrozen (where suitable) soon afterwards in
	Defrosted food cannot be refrozen unless it is cooked.		order to prevent health risks.
	• Do not put too much fresh food into the freezer at once.
	This could go beyond the freezer’s cooling capacity (see
	‘Technical Data’).

GB

14

4. Installation

Positioning Your Appliance

Choosing the Right Location

This appliance should be installed in a room that is dry and well ventilated. To provide adequate ventilation, make sure the refrigerator is at least 15 mm clear on all sides from kitchen cabinetry(Fig.4-1). Any units placed above the appliance must be clear by 15t ventilation.

must be left for opening the doors and removing the shelves (Fig.4-2).

This appliance should be at least 100mm from any electric or gas cooker and 300mm from any coal or oil stove. If this is not possible, make sure that appropriate insulation is used.

Avoid exposing the appliance to direct sunlight, and sources of heat (such as radiators, heaters or cookers).

If this appliance is situated in a cold environment (such as

consistent and this may damage foods. A consistent ambient temperature of 10°C or above is recommended.

Fig.4-1

15mm

ArtNo.600-0034 - Clearances

Fig.4-2

15

590 15

400

450

All dimensions in mm

Fig.4-3

Toe

moulding

(Doors omitted for clarity)

15

Fig.4-4

water DxD	-600.ArtNo
tconnec	- 0048

Fig.4-5

Hinge cover

Fig.4-6

Fig.4-7

Hinge cover

Fig.4-8

Removing and Installing the Doors

!	In the event that you need to remove the	GB
	refrigerator doors, please follow the door removal
	and installation instructions below.
! It is suggested, for your safety, to have two or more
	people to assist you in completing the below task to
	avoid injury, product damage or property loss.

Unscrew the 2 screws holding the toe moulding in position and remove(Fig.4-3).

Release the water coupler: press and hold in the collar as shown(Fig.4-4) and remove the water pipe.

Remove the top cap.

The Freezer Door

1.Undo the hinge cover screw and remove the cover (Fig.4-5). Disconnect all wires except for the grounding wire.

2.Undo the screws holding the upper hinge in position and then remove the hinge(Fig.4-6).

3.Lift the freezer compartment door to remove it. Next, lift the door enough to be able fully pull the water line out from the bottom.

The Fridge Door

1.Undo the hinge cover screws and remove the cover (Fig.4-7). Disconnect all wires except for the grounding wire.

2.Undo the screws holding the upper hinge in position and then remove the hinge(Fig.4-8).

3.Lift the refrigerator compartment door to remove it.

oor

16

Levelling the Fridge-freezer and

Adjusting the Doors

Make sure that the appliance is on solid level flooring. If the refrigerator is placed on a plinth, flat, strong and fire resistant materials must be used.

This appliance has front adjustable feet, which can be used to level the appliance.

Insert a suitable flat screwdriver into the slots of the adjustable feet. Turn the screwdriver clockwise to raise the feet (Fig.4-9), and counter-clockwise to lower the feet (Fig.4-10).

Levelling the Doors

The doors may require some alignment before connecting the fridge-freezer to the electrical supply. This can be done by adjusting the levelling feet (Fig.4-9 and Fig.4-10).

To raise the left-hand door turn the left-hand foot clockwise until it is level (Fig.4-11).

To raise the right-hand door, turn the right-hand foot clockwise until the it is level.

Fitting the Handles

The door handles fix onto the mounting studs already fitted to each door (Fig.4-12).

Use the Allen key from the instruction kit bag.

1.Place the handle firmly over the mounting studs.

2.Insert the grub screw into the hole located under each handle standoff bar.

3.Using the Allen key, tighten the grub screw fixing the handle to the door.

4.Fix the cover of top bolts to the right position.

Do not over-tighten the grub screw.

Electrical Supply Connection

Connect the appliance to the electrical supply (220-240V ~ 50Hz) with the plug and lead, which ar

Connections to the mains supply should be in accordance with local regulations.

!The appliance must be plugged into an earthed socket.

!Always make sure that the plug is accessible after the appliance has been positioned.

Fig.4-9

Fig.4-10

.600-0035 - Adjus sting the feet

Fig.4-11

Fig.4-12

Screw cover

Grub screw

Standoff bar

Handle

17

Fig.4-13

ArtNo.601-0010 - SxS 661-9 - Pipe to filter

Fig.4-14

ArtNo.601-0005 - SxS 661-9 - Securing the pipe

Fig.4-15

ArtNo

BSP connector

Fig.4-16

	Water Supply Connection
	! It is recommended to have this product installed by	GB
	a qualified technician.

Note: For further installation details refer to the instructions

Pressure of the cold water supplied to the automatic icemaker is between 0.15-0.6 Mpa.

The water tube should be of an appropriate length, usually 8 metres, and should be free of bends after being inserted into place. If the water pipe is too long

ice and cold water content.

•DO NOT connect to the water supply when the ambient temperature is below 0°C, otherwise the water pipe may freeze.

	Always connect to the drinking water supply.
	Keep the water pipe away from heat sources.
	The water filter is there to filter impurities in the water,
	and to make ice clean and hygienic. It cannot sterilise
	or destroy anything , so be certain to connect the water
	pipe to a drinkable water source.
Automatic water system,do not manually add water.
	If the ice maker is turned on but the appliance is not

connected to water,the ice maker will not work.

Fitting the Water Filter

Measure out and cut the length of pipe required from the

supply. Make sure that you achieve a square cut using a sharp knife.

(Fig.4-13).

groove as shown(Fig.4-14).

Connect the end into the plastic adaptor(Fig.4-15). Screw the adaptor onto a suitable ½” BSP connector water outlet.

Access the water valve assembly at the back of the refrigerator. Push the pipe into the valve assembly (Fig.4-16).

Open the wa water pipe joints and allow the water to run until it is clear.

Comissioning the Water Dispenser

for 1 minute. Do not press for more than 1 minute to prevent overheating of the pad activator solenoid. Cold water will

18

Empty the appliance of food and remove the shelves.

Clean the interior using warm water and bicarbonate of soda with a soft cloth. Make sure that the interior is then dried carefully with a suitable cloth.

5. Cleaning and Maintenance

Defrosting

Defrosting is done automatically so there is no need to manually defrost this appliance.

!DO NOT use mechanical devices to accelerate the defrosting process.

Cleaning

!Disconnect the appliance from the power supply before cleaning.

Shutting Off the Refrigerator

In the event of a power cut, food should remain safely cold for about 3 hours.

Should there be a prolonged power cut you may need to remove food from the freezer compartment and store it in a cold place, wrapped in layers of newspaper to preserve suitable temperatures.

Once power is restored replace the food back into the freezer compartment.

To keep internal odours to a minimum it is best to periodicallyShould food begin to defrost, or the power cut last longer clean the inside shelves, crispers, bins and wall. than expected, it is advised that you consume any food

removed from the freezer.

!DO NOT use harsh abrasives, or aggressive cleaners as these can damage the interior of the appliance.

Shelves and other accessories (plastic and glass parts) can be cleaned in the sink using liquid dishwashing liquid and warm

If the power outage is short term, most foods can be left inside the freezer compartment – this is the best way of preserving temperature – and surrounded by ice cubes from the icebox. This is also an ideal solution for power outages you may have been pre-warned about.

When experiencing a power cut of any kind, do not add any extra foods to the freezer.

before replacing them inside the appliance.

Always keep the door seals clean.

!The fridge is heavy. When moving the refrigerator be careful to protect the floor.Keep the refrigerator vertical and do not tilt the refrigerator – this prevents damage to the floor.

!DO NOT spray or rinse the fridge with water or other liquids. This could harm the electrical parts.

When Not in Use

If you are not using the appliance for an extended length

supply, empty any food out, clean the inside of the appliance and leave the door ajar. This will save energy, and also prevent a build up of stale odours inside.

Water Filter

!

!

!

!

!

Use a dry cloth when cleaning near the electrical parts (such as the light or switch).

DO NOT clean the fridge with a stiff or wire brush.

DO NOT use an organic solvent such as detergent, petrol, lacquer, thinners, acetone or acid.

To prevent your skin sticking to cold steel parts, make sure your hands are not wet when touching the parts.

DO NOT use HOT water to clean the glass shelves, as they may break or crack.

every 6 months. However, if the water quality show signs of

be changed sooner.

!After installing a new water filter,discard all ice produced during the first 24 hours.

19

3.1.1 It is in a hot or humid environment.

3.1.2 The door is left open.

6. Troubleshooting

GB

Problem

Cause

Solution

The temperature is too low

1.1The temperature inside the freezer is too low, with the fresh

1.2The temperature inside the fresh food compartment is too cold, while the freezer sections

1.3The foods stored in the full width pantry are frozen.

1.1.1The temperature inside the freezer section is set too low.

1.2.1The temperature inside the fresh food area is set too low.

1.3.1The control setting in the fresh food area is set too cold.

1.4	The foods stored in the crisper	1.4.1 The settings for the fresh
	are frozen.	food compartment are too
		cold.
1.5	Readings on the dispenser	1.5.1 An electronic operating
	display are showing error	problem has been
	codes.	encountered.

1.1.1.1Set the temperature in the freezer slightly higher then wait 24 hours for new balance to be achieved.

1.2.1.1Set the temperature inside the fresh food section slightly warmer. The temperatures will reach new balance within 24 hours.

1.3.1.1Set the fresh food control setting slightly higher. The new set point temperature will reach a balance within 24 hours.

1.4.1.1Raising the fresh food control settings to a slightly higher temperature and/or lowering the humidity control setting will prevent frost or ice forming.

1.5.1.1Call your service engineer who can diagnose the problem and make correction.

The temperature is too high

2.1	The freezer drawer sections	2.1.1 The doors are opened
	or fresh food compartment	frequently or for too long
	temperatures are too high.	each time.
		2.1.2 The doors are left open.
2.2	The temperature is too warm in	2.2.1 The temperature setting in
	the freezer but okay in the fresh	the freezer is set too warm.
	food section.
2.3	The temperature is too warm in	2.3.1 The temperature setting in
	the fresh food section but okay	the fresh food section is set
	in the freezer.	too warm.
2.4	The temperature inside the	2.4.1 The fresh food set
	crisper is too warm.	temperature is too warm.

2.1.1.1Try to reduce the frequency of opening doors.

2.1.2.1Take extra care to keep gaskets sealing well around the perimeter of the doors. Keep gaskets clean and dirt free.

2.2.1.1Set the temperature colder for the freezer section. Then allow it to balance within 24 hours at new colder temperature.

2.3.1.1Set the food temperature control slightly colder. The new colder temperature can be achieved within 24 hours.

2.4.1.1Set the fresh food temperature colder and the balance to colder temperature will be achieved within 24 hours

Water, humidity or frost/ice in the fridge

3.1Moisture formation on the inside of the fridge.

3.1.1.1 Try raising the temperature slightly in the

3.1.2.1 Check to make sure the door gaskets are clean and sealing well against the metal cabinet frame.

3.1.3 The door or drawer is opened 3.1.3.1 Reduce the frequency of door openings. too frequently or for too long

each time.

3.1.4Food containers or liquids are 3.1.4.1 Let hot foods cool to room temperature and

left open.

cover foods and liquids.

3.2Water droplets collect in the lower crisper drawer areas.

3.2.1 Humidity settings are set too	3.2.1.1 It is normal for some wet air to collect inside the
high.	enclosed crisper. To reduce the accumulation
	of moisture, lower the humidity setting and/or
	raise the fresh food compartment temperature.

20

foods.

3.3.2 Door seal leaks or frequent door openings in humid environment.

Problem

Cause

Solution

3.3Water forms at underside of the 3.3.1 crisper glass covers.

3.3.1.1 with a dry cloth to remove excess moisture.

3.3.2.1Check the door gaskets and reduce door openings. Possibly raise fresh food temperature.

Water/humidity/frost on the outside of the fridge

4.1	Wet air forms droplets of water 4.1.1	Warm, humid air in the
	on the outside edges of the	environment mixes with
	fridge.	cooler air at the door gasket
		areas of the fresh food
		and freezer compartments
		causing condensation.

4.1.1.1A small amount of dew or water moisture is normal. It is best to wipe it down with a dry cloth to improve performance.

4.1.1.2A slight increase in the compartment temperatures can reduce this moisture formation.

4.1.1.3Check door gasket for proper seal and clean.

Automatic Ice maker

5.1The ice maker does not work properly.

5.2Ice cubes are too large or too small.

Cold water & ice dispenser

6.1Cold water not dispensing.

5.1.1Ice cubes are sticking together.

5.1.2Ice cubes may end up sticking together if stored too long.

5.2.1Ice maker water supply set incorrectly.

6.1.1The freezer or refrigerator door is not fully closed. The water supply pipe is not open.

5.1.1.1Take out the lump of ice cubes, crush it and then return only the separated ice cubes back to the ice cube container.

5.1.2.1See 5.1.1.1 above.

5.2.1.1Adjust the ice maker water supply.

6.1.1.1Close all appliance doors.

Open the water supply line all the way.

		6.1.2		6.1.2.1
		6.1.3	The water line is blocked.	6.1.3.1	Check that the water tubes are not kinked or
					restricted.
6.2	The water has a strange odour. 6.2.1		The water has been stored	6.2.1.1	Remove 7 cups of water and throw away.
			too long without use.		Check if the odour improves.
		6.2.2	The local potable water	6.2.1.2	Contact your local water supply company to
			source is suspect.		check quality of the water.
6.3	Ice not dispensing.	6.3.1	The freezer or refrigerator	6.3.1.1	Close all appliance doors.
			door is not fully closed.
		6.3.2	No ice cubes in the container 6.3.2.1		Wait until ice cubes are supplied.
		6.3.3	Freezer temperature set too	6.3.3.1	Lower the freezer temperature to improve the
			high.		ice cube maker performance.
6.4	Dispenser is jammed	6.4.1	Defrosting water has frozen	6.4.1.1	Remove the container. Clean and dry the
			on the spindle.		spindle. Replace the container.
		6.4.2	Ice cubes are jammed	6.4.2.1	Remove the ice cubes between the ice maker
			between the ice maker and		and container.
			container.
		6.4.3	Ice cubes are sticking	6.4.3.1	Take out the lump of ice cubes, crush it and then
			together.		return only the separated ice cubes back to the
					ice cube container.
		6.4.4	Other ice cubes were placed	6.4.4.1	Only ice cubes produced by the ice maker can
			in the dispenser.		be used in the dispenser.

21

22

Problem

Cause

Solution

The fridge has a bad odour

7.1The inside of the fridge is dirty. 7.1.1 The inside walls, shelves, and 7.1.1.1 Clean all inside surfaces with warm water and

		door bins need cleaning	a clean soft damp cloth then wipe dry.
	7.1.2	Food in the fridge has been	7.1.2.1 Wrap and cover foods to extend useful food life.
		stored beyond its useful life.
The door is hard to open and/or close
8.1	The door has a closing problem. 8.1.1	The door may have food	8.1.1.1 Reposition the shelves, door bins, or internal
		articles or packages that are	containers to allow the door to close.
		obstructing closure.
	8.1.2	The level of the refrigerator is	8.1.2.1
		causing the door to shift out
		of position.
	8.1.3	The door could be hitting	8.1.3.1 Provide a good 25mm (1”) clearance on all
		against adjacent cabinets or	3 sides and on top of the cabinet so doors can
		appliances.	open and close freely.

GB

General

9.1	The compressor does not work. 9.1.1		The refrigerator is in deep	9.1.1.1	This is normal for a refrigerator that goes into
			freeze cooling		deep freeze automatically. The period of deep
					freeze cooling lasts about 30 minutes.
		9.1.2	The refrigerator is not	9.1.2.1	Make sure the plug is inserted all the way into
			powered on.		the power outlet.
				9.1.2.2	Has the circuit breaker tripped? Check and
					change to a new 13A fuse and/or reset the
					circuit breaker.
				9.1.2.3	Check the electrical supply to the room. Call the
					local electricity company.
9.2	The fridge operates frequently	9.2.1	The room temperature or	9.2.1.1	It is normal for the fridge to operate
	or operates for a long time.		ambient temperature is high.		continuously.
		9.2.2	The ice maker is in operation. 9.2.2.1		This is normal – the ice maker adds extra work
					load in the refrigerator.
		9.2.3	The doors are frequently	9.2.3.1	Try to reduce frequency of door or drawer
			opened and closed.		openings.
		9.2.4	The control settings in	9.2.4.1	Raise up the compartment temperatures slightly
			the freezer and fresh food		and allow 24 hours to reach new balance.
			compartments are set to cold
			level.
		9.2.5	Door seals may be dirty,	9.2.5.1
			frayed or cracked.		hair dryer so gasket takes contour of metal
					frame.
9.3	The compressor frequently	9.3.1	The compartment	9.3.1.1	This is normal. The fridge compressor will
			temperature sensors keep		provide the required cooling level.
			the fridge at the set points
			causing the compressor to
			cycle.
10.1	The light is out.	10.1.1	The light switch is blocked	10.1.1.1	Disconnect the power supply cord plug.
			somehow with debris or food		Locate the light switch on the food liner wall and
			particles		move it to see if pressing the switch in and out a
					few times can dislodge the food.
		10.1.2		10.1.2.1	Make sure the power cord plug is fully engaged
					into the wall outlet socket.
11.1 A beeping noise from inside the 11.1.1			A door is open for over 60	11.1.1.1	This is normal and will repeat every 1 minute
	fridge or freezer.		seconds.		until the door is closed.

8. Technical Data

Ratings

Model	HRF-628A*6
Electrical – voltage / frequency	220-240V 50Hz
Energy efficiency class	A+
Climate class	SN-N-ST
Freezer compartment star rating	*/***
Refrigerant	R600a 80g
Gross capacity	610 litres
Net capacity	550 litres
Net capacity – refrigerator compartment	375 litres
Net capacity – freezer compartment	175 litres
Freezer capacity / 24 hours	10kg / 24 hours
Energy consumption / year	420kW. h / year
Energy consumption (EN153)	1.15kW.h / 24h
Maximum noise level	42dB(A)
Maximum storage time by power failure	5 hours
Ice making capacity	1 kg/24h
Model	HRF-628I*6
Electrical – voltage / frequency	220-240V 50Hz
Energy efficiency class	A+
Climate class	SN-N-ST
Freezer compartment star rating	*/***
Refrigerant	R600a 80g
Gross capacity	610 litres
Net capacity	550 litres
Net capacity – refrigerator compartment	375 litres
Net capacity – freezer compartment	175 litres
Freezer capacity / 24 hours	10kg / 24 hours
Energy consumption / year	420kW. h / year
Energy consumption (EN153)	1.15kW.h / 24h
Maximum noise level	42dB(A)
Maximum storage time by power failure	5 hours
Ice making capacity	1 kg/24h

23

Inhalt

1.	Erste Schritte	1
	Sicherheit	1
	Informationen zum Kühlmittel	2
	Umweltschutz	2
2.	Informationen zu Ihrem
	Kühlgerät	3
	Informationen zum Aufbewahrungsfach für
	frische Lebensmittel	5
	Informationen zum Gefrierbereich	6
	Eiswürfel-/Wasserbereiter	7
	Hausbar	7
	Betrieb der Kühl-/Gefrierkombination	9
	Verwenden des Wasser-/
	Eiswürfelbereiters	12
	Sicherheit	12
	Abtauautomatik	12
	Alarmfunktion	12
	Abschalten des Displays	12

3.Tipps zur Lebensmittelaufbewahrung 13

Tipps zur Lagerung frischer
Lebensmittel	13
Tipps zum Einfrieren von
Lebensmitteln	14

4.	Installation	15
	Aufstellen des Geräts	15
	Ausund Einbau der Türen	16
	Ausrichten der Kühl-/
	Gefrierkombination in der Waagerechten
	und Einstellen der Türen	17
	Ausrichten der Türen in der
	Waagerechten	17
	Anbringen der Griffe	17
	Anschluss für Stromversorgung	17
	Anschluss für Wasserzufuhr	18
5.	Reinigung und Wartung	19
	Abtauen	19
	Reinigen	19
	Den Kühlschrank ausschalten	19
	Bei Nichtgebrauch	19
		19
6.	Fehlerbehebung	20
7.	Technische Daten	23

D

•Lesen Sie zunächst die Bedienungsanleitung durch.

•Bewahren Sie die Bedienungsanleitung an einem sicheren Ort auf.

•Achten Sie darauf, dass Lüftungsöffnungen im Gehäuse des Geräts oder in der eingebauten Struktur nicht blockiert sind.

•Verwenden Sie nur vom Hersteller empfohlene mechanische Geräte oder Mittel zum Beschleunigen des Abtauprozesses.

•Beschädigen Sie den Kühlkreislauf nicht.

•Verwenden Sie nur vom Hersteller empfohlene elektrische Geräte in den Aufbewahrungsfächern für Lebensmittel.

•Aufgrund unserer Richtlinie der kontinuierlichen Verbesserung behalten wir uns das Recht vor, ohne Vorankündigung Änderungen an den technischen Daten vorzunehmen.

1. Erste Schritte

Vielen Dank, dass Sie sich für diese Kühl-/Gefrierkombination entschieden haben. Wir hoffen, dass diese moderne und praktische Lösung Ihren Kühlanforderungen gerecht wird. Lesen Sie diese Bedienungsanleitung vor Verwendung Ihrer neuen Kühl-/Gefrierkombination durch. Bewahren Sie die Bedienungsanleitung an einem sicheren Ort auf, und machen Sie sie gegebenenfalls neuen Eigentümern zugänglich. Wir hoffen, dass Ihnen diese Bedienungsanleitung alle gewünschten Informationen liefert. Sollten Sie Fragen haben, wenden Sie sich bitte an uns (unter „Garantie“ erhalten Sie Informationen zum Kundenservice).

!WARNUNG! Dieses Gerät muss geerdet werden.

!Lassen Sie das Gerät zunächst mindestens sechs Stunden ruhen. So kann sich das Kühlsystem nach dem Transport stabilisieren.

!Achten Sie darauf, dass dieses Gerät von einer qualifizierten Person installiert wird.

!Der Gefrierbereich wurde mit 4 Sternen bewertet.

!Dieses Gerät ist nur für den Privatgebrauch konzipiert. Wenn es für andere Zwecke verwendet wird, werden Gewährleistungsansprüche möglicherweise ungültig.

•Reinigen Sie das Gerät vor dem Anschluss an die Stromversorgung innen mit warmem Wasser und Natron, und trocknen Sie anschließend alles sorgfältig.

•Stellen Sie sicher, dass keine Teile des Geräts beschädigt sind, insbesondere Kühlsystem, Schläuche oder Kabel. Falls Beschädigungen vorhanden sind, darf das Gerät NICHT installiert werden. Wenden Sie sich an einen qualifizierten Servicetechniker oder an den Kundenservice.

•Wenn sich die Zubehörteile im Inneren des Geräts beim Transport verlagert haben, bringen Sie sie gemäß den Anweisungen wieder an die richtige Position.

•Achten Sie darauf, dass die Stromversorgung für dieses Gerät korrekt ist. Die erforderlichen

Stromdaten befinden sich auf dem Datenetikett des Geräts. Das Datenetikett befindet sich im Inneren des Geräts (oben im Kühlbereich).

•Wenn das Gerät aufgestellt, gereinigt und getrocknet wurde und sich nach dem Transport einige Zeit in der Ruheposition befand, kann es eingesteckt und eingeschaltet werden.

Sicherheit

!WARNUNG! Verwenden Sie mit diesem Gerät ausschließlich Trinkwasser.

!WARNUNG! Achten Sie darauf, dass um das Gerät keine Gegenstände stehen.

!Beschädigen Sie den Kühlkreislauf nicht. Im Falle von Beschädigungen darf das Gerät nicht verwendet werden.

!WARNUNG! Verwenden Sie KEINE mechanischen Geräte (z. B. Haartrockner) zum Abtauen des Geräts.

!WARNUNG! Die Wasserund Eisschläuche MÜSSEN vor der Verwendung durchgespült werden. Weiteres erfahren Sie unter „Eiswürfel-/ Wasserbereiter“ in dieser Bedienungsanleitung.

•Achten Sie beim Entsorgen alter Geräte darauf, dass die Verriegelungsmechanismen vor der Entsorgung deaktiviert wurden. Es empfiehlt sich, die Tür des Geräts komplett abzunehmen, damit sich Kinder nicht versehentlich im Gerät einsperren können.

•Das Gerät muss sicher an die Stromversorgung angeschlossen werden. Lose Kabel, defekte Stecker und ungeschützte Drähte stellen ein Sicherheitsrisiko dar. Stellen Sie sicher, dass alle Anschlüsse in Ordnung sind.

•Vor routinemäßigen Wartungsarbeiten oder kleineren Reparaturen muss das Gerät von der Stromversorgung getrennt werden. Dazu zählen auch Reinigungsarbeiten und das Austauschen von Leuchtmitteln.

•Achten Sie darauf, die kalten Oberflächen des Geräts während des Betriebs NICHT zu berühren, da Hände daran haften bleiben und Kaltverbrennungen entstehen können.

•Achten Sie beim Ändern des Abstellorts darauf, dass Leitungen, Schläuche und der Kondensator nicht beschädigt werden. Wenden Sie sich bei entsprechenden Beschädigungen an einen qualifizierten Servicetechniker.

•Schäumende Flüssigkeiten (kohlensäurehaltige Getränke) dürfen nicht eingefroren werden. Beim Gefrieren vergrößert sich das Volumen dieser Flüssigkeiten, wodurch die entsprechenden Flaschen bzw. Behälter brechen oder explodieren können.

•Lebensmittel, die vor dem Verzehr zunächst aufgetaut oder zubereitet werden müssen, wie Brot oder Fleisch, dürfen nicht gefroren verzehrt werden.

•Wenn Lebensmittel nicht wie gewohnt aussehen oder einen unangenehmen Geruch verströmen, sollten Sie diese nicht verzehren. Entsorgen Sie sie im Zweifelsfall.

•Verwenden Sie keine scharfen Metallgegenstände, um Eis von den Oberflächen des Geräts zu kratzen. Verwenden Sie nur speziell dafür vorgesehene Utensilien (z. B. Schaber aus Kunststoff), und gehen Sie dabei vorsichtig vor, um Beschädigungen an der Beschichtung zu vermeiden.

•Das Kühlsystem beinhaltet Kühlmittel und Öle, die gesundheitsschädlich sind, sobald sie austreten. Stecken Sie das Gerät in diesem Fall aus, und lüften Sie den Raum. Stellen Sie sicher, dass kein Kühlmittel in oder an Ihre Augen gelangt. Wenden Sie sich an einen Servicetechniker, oder sorgen Sie dafür, dass das Gerät entfernt wird.

1

Elektrische Sicherheit

•Netzanschlüsse müssen den örtlichen Vorschriften entsprechen.

•Nach dem Aufstellen des Geräts MUSS der Stecker zugänglich sein.

•Achten Sie darauf, dass das Netzkabel freiliegt.

•Treten Sie nicht auf das Kabel.

•Vermeiden Sie eine Beschädigung des Netzkabels, wenn Sie die Position des Kühlgeräts verändern.

Beschädigtes Netzkabel

Wenn das Netzkabel beschädigt ist oder Verschleißerscheinungen zeigt, schalten Sie das Kühlgerät aus, und wenden Sie sich zum Ersatz des Kabels an einen autorisierten Händler.

Informationen zum Kühlmittel

WICHTIG: Dieses Gerät enthält das Kühlmittel ISOBUTAN (R600a). Achten Sie beim Ändern des Abstellorts

darauf, dass das Gerät keinen abrupten Stößen oder Schüttelbewegungen ausgesetzt ist. Andernfalls könnte das Gerät beschädigt werden.

Beschädigungen des Kühlkreislaufs, mit einem möglichen Austreten von Kühlmittel, können zu einem Explosionsrisiko durch externe Funken oder Flammen führen.

Kühlmittelaustritt

Warten Sie, bis das Mittel verdunstet ist, und stellen Sie sicher, dass für entsprechende Belüftung gesorgt ist.

Verhalten des Kühlmittels

Flammen in Kontakt kommt. Das Kühlmittel R600a ist schwerer als Luft: Beim Austreten bildet sich eine hohe Konzentration auf Bodenebene, wo keine ausreichende Belüftung vorhanden ist.

Erste Hilfe

Einatmung

Bringen Sie die betroffene Person aus der verunreinigten Zone in einen warmen, gut belüfteten Raum.

Die Einatmung über einen längeren Zeitraum kann zu Erstickungserscheinungen und möglicherweise zu Bewusstlosigkeit führen. Beginnen Sie falls notwendig

mit der künstlichen Beatmung, und verabreichen Sie in schweren Fällen unter strenger ärztlicher Aufsicht Sauerstoff.

Hautkontakt

Gelegentlicher Hautkontakt birgt sehr geringe Gesundheitsrisiken. Waschen Sie in diesem Fall die betroffene Hautpartie gründlich ab.

Flüssigkeitsspritzer und zerstäubende Flüssigkeit können zu Kaltverbrennungen führen. Waschen Sie die betroffene Hautpartie mit ausreichend Wasser ab, und lassen Sie sich bei Verbrennungen von einem Arzt behandeln.

Augenkontakt

Waschen Sie das Auge bei geöffnetem Lid mit ausreichend Wasser, und wenden Sie sich so bald wie möglich an einen Facharzt.

Allgemein gilt: Sollten Sie das Kühlmittel R600a einatmen oder damit in Kontakt kommen, konsultieren Sie Ihren Hausarzt.

Umweltschutz

Entsorgung der Verpackung

Ihr neues Kühlgerät wurde für den Transport zu Ihnen entsprechend verpackt. Alle verwendeten Materialien können umweltfreundlich entsorgt und recycelt werden. Bitte tragen Sie zum Schutz der Umwelt bei, und entsorgen Sie die Verpackung entsprechend.

Entsorgung Ihres alten Kühlgeräts

Dieses Symbol auf dem Produkt bzw. der

Verpackung gibt an, dass das Produkt nicht mit dem normalen Hausmüll entsorgt werden darf. Stattdessen sollte es an die Sammelbzw.

Recyclingstelle Ihres Bezirks gebracht werden.

Alte Geräte können teilweise noch verwertet werden. Eine umweltfreundliche Entsorgungsmethode stellt sicher, dass wertvolle Rohmaterialien gewonnen und neu verwendet werden können.

Wenn ein Gerät das Ende seiner Betriebszeit erreicht hat, trennen Sie die Verbindung zur Stromversorgung. Schneiden Sie das Netzkabel ab, und entsorgen Sie es zusammen mit dem Stecker.

Sorgen Sie dafür, dass die Tür nicht mehr verwendet werden kann (durch Entfernung der Dichtungen), oder nehmen Sie die Tür ab, damit sich Kinder nicht versehentlich darin einschließen können.

wird als Treibmittel für den Isolierschaum verwendet.

Achten Sie beim Transport des Geräts darauf, dass der Kühlkreislauf nicht beschädigt wird.

Indem Sie sicherstellen, dass dieses Produkt korrekt entsorgt wird, vermeiden Sie potenzielle negative Auswirkungen auf die Umwelt und die Gesundheit des Menschen.

Um weitere Informationen zum Recycling dieses Produkts zu erhalten, wenden Sie sich an die Behörden vor Ort, Ihre Abfallstelle für Hausmüll oder die Verkaufsstelle.

D

2

2. Informationen zu Ihrem Kühlgerät

Abb. 2-1 (HRF-628I*6)
Gefrierbereich	1	12
2
3
4
5
6
7
	8	9

Kühlbereich

10

11

10

11

10

Der HRF-628I*6 (Abb. 2-1) bietet die folgende Ausstattung:

1.Eisfach

2.Eiswürfelbehälter mit Eiswürfelbereiter (im Behälter)

3.Wasserund Eiswürfelbereiter

4.LED-Lampe im Gefrierschrank

5.3 Aufbewahrungsfächer im Gefrierschrank

6.LED-Lampe im Gefrierschrank (hinter Schub)

7.2 Türfächer im Gefrierschrank

8.2 Schübe im Gefrierschrank

9.2 Gemüsefächer

10.4 Türfächer im Kühlschrank

11.4 Aufbewahrungsfächer im Kühlschrank

12.LED-Lampe im Kühlschrank

FCKWund frostfrei

Schnellgefrier-, Schnellkühlund Urlaubsfunktion Automatische Temperaturanzeige

Alarmsignale bei zu hoher Temperatur und offener Tür

3