FeiYu Tech
FeiYu Y6 scorpion Copter
Frame Instruction Manual
Please read the manual carefully before using FeiYu Y6
Guilin Feiyu Electronic Technology Co., Ltd
Rm. B305, Innovation Building, Information Industry Park, Chaoyang Road, Qixing
District, GuiLin, CN
!"#$$%%%&'()*+,-(. &./01111112
Email:feiyudz@yahoo.cn
FeiYu Tech
681mm
Features
1. Dimensions
2. Empty Frame Weight: 630g (receiver and battery not included)
3. Payload Capability: 900g ( battery, receiver, and camera included)
4. Maximum Gross Take-Off Weight: 1430g. DO NOT OVERLOAD ON FeiYu Y6 WHICH CAN
LEAD TO DANGER.
5. Airborne period: >10mins (with 3S 2200mAh battery)
6. Cell Chemistry: 3S 1500mAh ~ 5000mAh Lithium Polymer, and instant discharge capacity >15C.
Support PWM normal ESC.
7. Can install FY91Q. needs at least 4 channels to fly your aircraft. We recommend you to use RC
device with 5 channels or more for expansion. Support most.Compatible with all the RC devices.
Note:First and Foremost is Safety. This is Not A Toy. Used extreme caution when operating the Y6.
Do Not Fly over Crowds or over people. Do Not use it as a chase copter.
450mm
Guilin Feiyu Electronic co.,Ltd http://www.feiyu-tech.com Email:feiyudz@yahoo.cn 1
FeiYu Tech
Install
Tools needed to build the Y6:
l Soldering Iron
l Rosen Core Solder
l Allen Wrench (provided)
Step 1:Frame Arm Assembly
Note: There are three LED on the side of arm,The LED should on out side.
Unpack the Frames, separate them as to color of l.e.d.’s i.e. Blue, Red, Green.
Remove the m3x5mm button head screws.
Remove the m3x30mm pillars.
Unpack the four motor mount plates.
Unpack the four motors.
Unpack the four landing gears.
Take a motor mount plate and using the allen wrench provided, attach the motor to the plate with four
M3× 30mm Pillar
M3×5mm
prop
Brushless motro
M3*5mm
Right Arm
soldering point
Left Arm
soldering point
Leg
Guilin Feiyu Electronic co.,Ltd http://www.feiyu-tech.com Email:feiyudz@yahoo.cn 2
Loading...