IK007 integration kit installation manual refrigeration
STM3900, STM4200,
SBM3800, SBM4300,
WTM2800, WTM3000, WTM3300, WTM3900, WTM4200, WTM4400, WTM5200, WTE4200, WTE5200,
WBM3700, WBM3800, WBM4000, WBM4300, WBM5100, WBE4300, WBE5100,
WRM3700, WRM4300,
WFM3000, WFM3600,
KTM3600, KTM3900, KTM4200, KTM4400, KTM5200, KBM3800, KBM4300, KBM5100.
2 contents refrigeration integration kit |
|
Congratulations |
Contents |
Congratulations and thank you for choosing our integration kit. Before you install the integration kit, we recommend that you read through the entire installation manual.
To avoid the risks that are always present when you install an electrical appliance, it is important that the integration kit and appliance is installed correctly. Please read the safety instructions in this installation manual as well as the appliance’s user manual to carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the integration kit please check it is not damaged. If in doubt, do not use the integration kit but contact your local Electrolux Customer Care Centre.
before you call
Please ensure you read the installation manual fully before you call for service, or a full service fee could be applicable.
environmental tip
Information on disposal for users
•Most of the packing materials are recyclable. Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers.
•If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
• General warnings |
3 |
• Refrigerator integration kit items |
4 |
• Cupboard dimensions |
5 |
• Installation of 120˚ hinge |
8 |
• Preparation |
9 |
• Attaching top hinge bracket |
9 |
• Attaching slide-housing to refrigerator doors |
10 |
• Placing refrigerator in cupboard |
12 |
• Refrigerator alignment |
12 |
• Securing refrigerator in cupboard |
13 |
• Attaching slide-bar to cupboard door |
14 |
refrigeration integration kit general warnings 3
General warnings
Please read the installation manual carefully and store in a handy place for later reference. Pass the installation manual on to possible new owners of the refrigerator. Please refer to the fridge user manual for warnings relating to the appliance. The symbols you will see in this booklet have these meanings:
tips and information
This symbol indicates tips and information about use of the refrigerator
environmental tip
This symbol indicates tips and information about economical and ecological use of the refrigerator
NOTE: We strongly recommend that a professional builder/cabinetmaker builds this unit into required cabinetry prior to finished installation in customer’s kitchen. Electrolux can not take responsibility for any installation issues when customer retrofits this product into cabinetry. Cabinet door height built in excess of refrigerator door height will be unsupported and risk bowing.
NOTE: Please refer to your Appliance User Manual for warnings relating to the appliance.
4 kit items refrigeration integration kit
Refrigerator integration kit items
Because this kit is common to a variety of models, you need to select the items required to suit your model. The items required for the models covered in this instruction booklet are shown below.
Those items not required on your particular model should be discarded.
item |
quantity in kit |
quantity required |
description |
|
|
two door model |
single door model |
Top Hinge Bracket |
1 |
1 |
1 |
PNº 1433129 |
|
|
|
Slide-Housing |
2 |
2 |
1 |
PNº 1445132 |
|
|
|
Slide-Bar |
2 |
2 |
1 |
PNº 1421620 |
|
|
|
Location Bracket |
1 |
1 |
1 |
Front Footing |
|
|
|
PNº 1444993 |
|
|
|
Refrigerator Screws |
8 |
8 |
4 |
PNº 741249 |
|
|
|
Cupboard Screws |
12 |
12 |
8 |
PNº 1449422 |
|
|
|
120º Hinge |
5 |
5 (3+2) |
3 |
PNº 1457832 |
|
|
|
Mounting plate for hinge |
5 |
5 (3+2) |
3 |
PNº 1458211 |
|
|
|
Self tapping wood screws |
20 |
20 |
12 |
PNº 1458212 |
|
|
|
NOTE: For the single door models WRM4300, WRM3700, WFM3600 & WFM3000 an additional kit, part number 1449661 is required (see page 11 for details).
refrigeration integration kit cupboard dimensions 5
Cupboard dimensions
tips and information
Pages 5, 6, 7 and 8 should be given to the person responsible for cupboard design and construction.
The cupboard dimensions required for each model are shown on page 6,7 & 8.
NOTE:
1.All sizes are internal and measured in millimetres.
2.It is important to ensure that the correct cupboard sizes are used to ensure adequate air flow around the refrigerator.
3.Cupboard hinges should be a 120° opening type. (Use hinges supplied).
4.Three hinges should be used on each cupboard door higher than 1000mm.
5.Ensure the refrigerator is not connected to a power supply whilst installation takes place.
6.Each operation should be carried out in the sequence specified in this instruction sheet.
NOTE: All sizes are internal and in millimetres.
Model |
Dim ‘A’ |
Dim ‘B’ |
Dim ‘C’ |
Dim ‘D’* |
Dim ‘E’ |
Dim ‘G’ |
Dim ‘H’ |
Dim ‘I’* |
(capacity litres) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
|
minimum |
|
|
|
|
|
|
|
2 door top freezer models |
|
|
|
|
|
|
Please |
|
280 litre |
1640 |
680 |
700 |
1047 |
500 |
219 |
300 |
use the |
calculation |
||||||||
290 litre |
1640 |
680 |
700 |
1047 |
500 |
219 |
300 |
below to |
300 litre |
1710 |
680 |
700 |
1117 |
500 |
219 |
300 |
measure |
330 litre |
1810 |
680 |
700 |
1217 |
500 |
219 |
300 |
Dimension |
360 litre |
1730 |
680 |
795 |
1137 |
600 |
241 |
395 |
‘I’ for your |
390 litre |
1810 |
680 |
795 |
1217 |
600 |
241 |
395 |
specific |
420 litre |
1730 |
740 |
795 |
1137 |
600 |
241 |
395 |
model. |
440 litre |
1810 |
740 |
795 |
1217 |
600 |
241 |
395 |
|
520 litre |
1810 |
740 |
895 |
1217 |
600 |
278 |
495 |
|
2 door bottom freezer models |
|
|
|
|
|
|
|
|
370 litre |
1660 |
740 |
745 |
702 |
600 |
241 |
395 |
|
380 litre |
1810 |
680 |
795 |
702 |
600 |
241 |
395 |
|
400 litre |
1760 |
740 |
745 |
702 |
600 |
241 |
395 |
|
430 litre |
1810 |
740 |
795 |
702 |
600 |
278 |
395 |
|
510 litre |
1810 |
740 |
895 |
702 |
600 |
|
495 |
|
single door models |
|
|
|
|
|
|
|
|
300 litre |
1810 |
680 |
700 |
– |
500 |
219 |
300 |
|
360 litre |
1810 |
680 |
795 |
– |
600 |
241 |
395 |
|
370 litre |
1810 |
680 |
700 |
– |
500 |
219 |
300 |
|
430 litre |
1810 |
680 |
795 |
– |
600 |
241 |
395 |
|
Step 1
Measure and confirm Dimension ‘A’.
Step 2
To calculate Dimension ‘I’ use the equation below.
Dim ‘I’ = Dim ‘A’ - (Dim ‘D’ + 5mm) mm
Step 3
*Add cabinetry thickness to Dimension ‘D’ and Dimension ‘I’ for final measurement before construction.
Loading...