D-Link DGS-1210-52MP User Manual

Product Highlights

Flexible Networking Options

• 8, 24 or 48 x 10/100/1000BASE-T ports

• 2 x SFP or 4 x RJ45/SFP COMBO ports

• PoE+ (802.3at) support on select models

Easy Management

• Multilingual Web UI, compact CLI,
SNMPv1/v2c/v3, and a variety of
management features

• Surveillance Mode UI - optional user
interface simplies surveillance network
conguration and maintenance

IPv6 Ready

• Fully IPv6 compatible and ready for future
addressing standards

DGS-1210 Series

Gigabit Smart Managed Switches

Features

Security Features

• Access Control Lists (ACLs)

• D-Link Safeguard Engine protects the CPU from
broadcast/multicast/unicast ooding

• Port Security supports up to 64 MAC addresses
per port

• ARP Spoong Prevention

• Smart IP-MAC-Port Binding

• DHCP Server Screening

Intuitive Management Options

• Web-based Graphical User Interface - Standard Mode
or Surveillance Mode

• D-Link Network Assistant Utility

• Simplied CLI through Telnet

• Built-in SNMP MIB for remote NMS (D-View 7.0)

Advanced Features

• Static Route

• Auto Voice VLAN

• Dual software images

• Dual conguration les

Green Technology

• Link status detection

• Port shut-o

• System hibernation

• Time-based PoE (PoE models only)

Overview

The D-Link DGS-1210 Series Smart Managed Switches are the latest generation
of switches to provide increased Power over Ethernet (PoE) output, a range of
physical interface types, multiple management interfaces, and advanced Layer
2 features. With all of these features combined, the DGS-1210 Series provides a
cost-ecient and exible solution for expanding any business network.

The DGS-1210 Series switches support 8, 24, or 48 10/100/1000BASE-T ports. Each
switch also supports an additional 2 or 4 Gigabit SFP ports for optical connections
using multimode or singlemode SFP transceivers.

PoE Support

Five of the eight models in the DGS-1210 series family support Power-over­Ethernet capabilities, simplifying deployments with IP cameras, VoIP phones,
wireless access points, and other powered devices. These models include the
DGS-1210-10P, DGS-1210-10MP, DGS-1210-28P, DGS-1210-28MP and DGS-1210­52MP. Using the switch’s management interface, an administrator can control
various PoE functions, such as remotely rebooting cameras or access points, from
anywhere on the network, including over the Internet.

The switches also support time-based PoE – an option that allows administrators
to set a time window that determines when each port’s PoE power is turned on
and o. All PoE models support the IEEE 802.3af and 802.3at standards, and each
PoE power budget varies per model.

DGS-1210 Series

Gigabit Smart Managed Switches

Advanced Features

The DGS-1210 Series comes equipped with a complete lineup of L2
features, including IGMP snooping, port mirroring, Spanning Tree
Protocol (STP), and Link Aggregation Control Protocol (LACP). The IEEE

802.3x Flow Control function allows servers to directly connect to the
switch for fast, reliable data transfers.

The DGS-1210 Series also supports advanced features such as static
routing, With static routing, IP routes are manually entered into a
routing table, which allows for communication between dierent
user groups in dierent VLAN segments in a network. The switch can
directly handle inter VLAN routing using multiple interfaces, making
the network run faster and more eciently. Because the switches can
manage internal routing, the network router can be assigned to handle
external trac routing only.

Network maintenance features include loopback detection and
cable diagnostics. Loopback detection signicantly speeds up
troubleshooting by automatically detecting and shutting down
switching loops. The cable diagnostics feature, designed primarily
for administrators and customer service representatives, determines
the cable quality and quickly discovers errors, allowing for hassle-free
diagnostics and maintenance.

Automatic Conguration

The DGS-1210 Series supports Auto Voice VLAN and Surveillance Mode,
which allow voice and video trac to be automatically identied and
handled dierently to regular network trac. Auto Voice VLAN detects
Voice over IP (VoIP) trac and automatically segments it from the rest of
the network, increasing security and allowing Quality of Service (QoS) to
be applied.

Secure Your Network

D-Link’s innovative Safeguard Engine protects the switches against
trac ooding caused by malicious attacks. The DGS-1210 Series
supports 802.1X port-based authentication, allowing the network
to be authenticated through external RADIUS servers. The Access
Control List (ACL) feature enhances network security and helps to
protect the internal IT network. The DGS-1210 Series also features
Address Resolution Protocol (ARP) spoong prevention, which provides
protection from attacks on the network that could allow an intruder
to sni data frames, modify trac, or bring trac to a halt altogether
by sending fake ARP messages. To prevent ARP spoong attacks, the
switch uses packet control ACLs to block invalid packets that contain
fake ARP messages. For added security, the DHCP server screening
feature lters DHCP replies on unauthorized ports to prevent them from
being assigned an IP address.

Versatile Management

The DGS-1210 Series comes with the D-Link Network Assistant (DNA)
utility that enables administrators to remotely control their network
down to the port level. The D-Link Network Assistant utility furthermore
allows customers to easily discover multiple D-Link Smart Managed
Switches within the same L2 network segment and display them on­screen for instant access. With this utility, users do not need to change
the IP address of their PC. This allows for simultaneous conguration
and basic setup of all discovered devices, including password changes
and rmware upgrades.

The DGS-1210 Series also supports D-View 7.0 and Command Line
Interface (CLI) through Telnet. D-View 7.0 is a network management
system that allows for the central management of critical network
characteristics such as availability, reliability, resilience, and security.

Surveillance Mode detects compatible ONVIF cameras and places
them in a surveillance VLAN, allowing a single switch to be used for
voice, video, and data, removing the need for dedicated hardware and
reducing maintenance costs. Surveillance Mode also includes its own
Web UI, making surveillance features easily accessible and simplifying
management of your surveillance network.

Lifetime Warranty and NBD Replacement

D-Link oers a Lifetime Warranty and Next Business Day (NBD) hardware
replacement on the DGS-1210 Series Gigabit Smart Managed Switches
to further its commitment to product quality and long-term customer
condence.

1

Gigabit Smart Managed Switches

Surveillance Mode User Interface

Surveillance Topology - Example Screenshot

DGS-1210 Series

Standard Mode User Interface

Device Information - Example Screenshot

DGS-1210 Series

Gigabit Smart Managed Switches

Technical Specications

General DGS-1210-10 DGS-1210-10P DGS-1210-10MP

Hardware Version Rev. F Rev. F Rev. F

10/100/1000 Ports 8 8 8

100/1000 SFP Ports 2 2 2

Port Standards & Functions IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)

Network Cables UTP Cat. 5, Cat. 5e (100 m max.)

Duplex Mode Full/half-duplex for 10/100 Mbps

Media Interface Exchange Auto MDI/MDIX adjustment for all twisted-pair ports

Switching Capacity 20 Gbps 20 Gbps 20 Gbps

Transmission Method Store-and-forward Store-and-forward Store-and-forward

MAC Address Table 8K entries 8K entries 8K entries

Static MAC Addresses 256 entries 256 entries 256 entries

Max. 64 Byte Packet Fwd Rate 14.88 Mpps 14.88 Mpps 14.88 Mpps

Packet Buffer Memory 4.1 Mbits 4.1 Mbits 4.1 Mbits

CPU Memory DDR3 128 MB DDR3 128 MB DDR3 128 MB

IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)

IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic

IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper)

IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic

IEEE 802.3az Energy Efficient Ethernet (EEE)

IEEE 802.3x Flow Control

IEEE 802.3af/at compliance (for PoE ports on PoE models)

Full-duplex for 1000 Mbps

Flash Memory 32 MB 32 MB 32 MB

Power over Ethernet (PoE) DGS-1210-10 DGS-1210-10P DGS-1210-10MP

PoE Standards N/A 802.3af (PoE) and 802.3at (PoE+) 802.3af (PoE) and 802.3at (PoE+)

PoE Capable Ports N/A Ports 1 - 8 (PoE+) Ports 1 - 8 (PoE+)

PoE Power Budget N/A 65 W 130 W

LEDs DGS-1210-10 DGS-1210-10P DGS-1210-10MP

Power (per device) Yes Ye s Yes

Console (per device) Yes Ye s Yes

Link/Activity/Speed (per port) Yes Ye s Yes

PWR Max -- Ye s Yes

Fan Error -- -- --