D-Link DGS-1210-28MP User Manual

Highlights

Seamless Integration

With a large variety of port configurations including PoE support and SFP ports, allowing business to buil and expand a flexible and adaptive network

Manageability

Advanced management functions make for a truly versatile series of switches that integrate performance and scalability

IPv6 Ready

Fully IPv6 compatible and ready for enterprise deployment, giving you a head start on the next Internet standards evolution

DGS-1210 Series

Gigabit Smart Managed Switches

Features

Green Technology

•Power saving via the following features:

•Link Status detection

•LED Shut-Off

•Port Shut-Off

•System Hibernation

•Time-based PoE (DGS-1210-10P/28P/28MP/52P/52MP)

Security Features

•Access Control List secures network

•D-Link Safeguard Engine protects the CPU from Broadcast/Multicast/Unicast Flooding

•Port Security supports 64 MACs per port

•ARP Spoofing Prevention

Intuitive Management

•D-Link Network Assistant Utility or web-based GUI

•Built-in SNMP MIB for remote NMS (D-View 7.0)

•Command Line Interface (CLI) through Telnet

Advanced Features

•Auto Surveillance VLAN

•Loopback Detection automatically disables a port when a loop is detected

•Cable Diagnostics allows administrators to determine cable status

•SFP ports for flexibility

•Auto MDI/MDIX

D-Link’s DGS-1210 Series Gigabit Smart Managed Switches integrates advanced management as well as security functions that provide performance and scalability. Management options for the switch include SNMP, Web Management, D-Link Network Assistant Utility, and compact command lines. The DGS-1210 Series uses Auto Voice VLAN, ensuring bandwidth is prioritised for a smoother voice performance. The DGS-1210-10/10P/20/28 features a fanless design that allows for quieter operation and helps to extend the device’s lifetime, while the DGS-1210-28P/28MP/52/52P/52MP feature a smart fan design that adjusts the fan speed depending on device temperature, saving energy and cutting costs without sacrificing performance.

The DGS-1210 Series includes a range of high power budget PoE-enable switches for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1210-10P is a 8-port Smart Managed PoE+ Switch that provides 8 PoE-enabled ports that can supply power of up to 30 W each. Whereas the DGS-1210-28P/28MP/52P/52MP are Smart Managed PoE+ switches with power budgets of 193/370 W, that provides 24/48 PoE-enabled ports with 4/8 ports that support up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.

Extensive Management and Layer 2 Features

Equipped with a complete line-up of L2 features, the DGS-1210 Series includes IGMP snooping, port mirroring, Spanning Tree Protocol (STP) and Link Aggregation Control Protocol (LACP). The IEEE 802.3x flow control function allows servers to directly connect to the switch for fast, reliable data transfers. At 2000 Mbps full duplex, the Gigabit ports provide high-speed data pipes to servers with minimum impact to data transfer fidelity. Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature, designed primarily for administrators and customer service representatives, can rapidly discover errors and determine the cable quality, allowing hassle free diagnostics and maintenance.

DGS-1210 Series Gigabit Smart Managed Switches

Quality of Service and Bandwidth Control

The DGS-1210 Series supports Auto Surveillance VLAN (ASV), and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology that the DGS-1210 Series Gigabit Smart Managed Switches provides. This technology consolidates data and surveillance video transmission through a single DGS-1210 Series, thus sparing businesses the expense of dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances the VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and individual VLAN, these features guarantee the quality and security of VoIP traffic. The DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with bandwidth control, network administrators can reserve bandwidth for important functions that are higher priority or require a larger bandwidth.

Secure your Network

D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The DGS-1210 Series supports 802.1X port based authentication,allowingthenetworktobeauthenticatedthroughexternalRADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network. The DGS-1210 Series includes ARP spoofing prevention, which protects from attacks on the network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages. To prevent ARP spoofing attacks, the switch uses packet control ACLs to block invalid packets that contain fake ARP messages. For addedsecurity,theDHCPserverscreeningfeatureroutesDHCPserverpacketsfrom user ports to prevent unauthorised IP assignment.

Versatile Management

The DGS-1210 Series provides a D-Link Network Assistant Utility that enables administrators to remotely control their network down to the port level. The D-Link network assistant utility allows customers to easily discover multiple D-Link Smart Managed Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup by taking switches, within the same L2 network segment, that are connected to the user’s PC, and displaying them on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices, including password changes and firmware upgrades. TheDGS-1210SeriesalsosupportsD-View7andCompactCommandLineInterface (CLI) throughTelnet. D-View 7 is a network management system that allows for the centralmanagementofcriticalnetworkcharacteristicssuchasavailability,reliability, resilience, and security.

If the worst should happen to your network you need the very best support and fast. Downtime costs your business money. D-Link Assist maximises your uptime by solving technical problems quickly and effectively. Our highly trained technicians are on standby around the clock, ensuring that award-winning support is only a phone call away.

With a choice of three affordable service offerings covering all D-Link business products, you can select the package that suits you best:

D-Link Assist Gold - for comprehensive 24-hour support

D-Link Assist Gold is perfect for mission-critical environments where maximum uptime is a high priority. It guarantees four hour around-the-clock response. Cover applies 24/7 for every day of the year including holidays.

D-Link Assist Silver - for prompt same-day assistance

D-Link Assist Silver is designed for‘high availability’ businesses that require rapid response within regular working hours. It provides a four hour response service Monday to Friday from 8am to 5pm, excluding holidays.

D-Link Assist Bronze - for guaranteed response on the next business day

D-Link Assist Bronze is a highly cost-effective support solution for less critical environments. Response is guaranteed within eight business hours Monday to Friday from 8am to 5pm, excluding holidays.

D-Link Assist can be purchased together with any D-Link business product. So whether you’re buying switching, wireless, storage, security or IP Surveillance equipment from D-Link, your peace of mind is guaranteed. D-Link Assist also offers installation and configuration services to get your new hardware working quickly and correctly.

Energy Saving

Incorporating D-Link Green technology, the DGS-1210 Series switches are capable of power-saving without sacrificing operational performance or functionality. Link status drastically reduces power consumption by automatically toggling ports without a link to sleep mode. The DGS-1210 Series takes the approach to green IT one step further by incorporating a special chipset with advanced silicon technology for efficient use of energy.

DGS-1210 Series Gigabit Smart Managed Switches

Technical Specifications

General

	Model Number	• DGS-1210-10	• DGS-1210-20		• DGS-1210-28		• DGS-1210-52
		• 8 x 10/100/1000 Mbps ports	• 16 x 10/100/1000 Mbps		• 24 x 10/100/1000 Mbps		• 48 x 10/100/1000 Mbps
	Interfaces		ports		ports		ports
		• 2 x SFP ports
			• 4 x SFP ports		• 4 x SFP ports		• 4 x SFP ports
			• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
			• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
	Port Standards		• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twistedpair copper)
			• IEEE 802.3az compliance
			• Auto-negotiation
			• IEEE 802.3x Flow Control
	Network Cables		• UTP Cat. 5, Cat. 5e (100 m max.)
	Duplex Mode		• Full/Half-duplex for 10/100 Mbps
			• Full-duplex for 1000 Mbps
	Media Interface Exchange		• Auto MDI/MDIX adjustment for all twisted-pair ports
	Performance
	Switching Capacity	• 20 Gbps	• 40 Gbps		• 56 Gbps		• 104 Gbps
	Transmission Method		• Store-and-forward
	MAC Address Table		• 16,000 entries per device
	Maximum 64 bytes packet	• 14.88 Mpps	• 29.8 Mpps		• 41.7 Mpps		• 77.4 Mpps
	forwarding rate
	Packet Buffer Memory	• 1.5 MB	• 1.5 MB		• 1.5 MB		• 3.0 MB
	CPU Memory		• 128 MB DDR3
	Flash Memory			• 16 MB
	Physical/Environmental
	AC Input		• 100 to 240 VAC 50/60 Hz internal universal power supply
	Maximum Power	• 13.59 W	• 16.09 W		• 22.45 W		• 38.27 W
	Consumption
	Standby Power Consumption	• 100 V: 9.3 W	• 100 V: 8.59 W		• 100 V: 17.65 W		• 100 V: 29.44 W
		• 240 V: 9.4 W	• 240 V: 8.80 W		• 240 V: 17.84 W		• 240 V: 29.49 W
	Acoustics	• 0 dBA	• 0 dBA		• 0 dBA		• Low speed: 39.8 dBA
							• High speed: 49.2 dBA
	Heat Dissipation	• 46.37 Btu/hr	• 54.91 Btu/hr		• 76.55 Btu/hr		• 130.58 Btu/hr
	Operating Temperature		• -5 to 50 °C (23 to 122 °F)
	Storage Temperature		• -20 to 70 °C (-4 to 158 °F)
	Operating Humidity		• 0% to 95% non-condensing
	Storage Humidity		• 0% to 95% non-condensing
	Dimensions (L x W x H)	• 280 x 126 x 44 mm	• 280 x 180 x 44 mm		• 440 x 140 x 44 mm		• 440 x 210 x 44 mm
		(11.02 x 4.96 x 1.73 in)	(11.02 x 7.09 x 1.73 in)		(17.32 x 5.51 x 1.73 in)		(17.32 x 8.27 x 1.73 in)
	Weight	• 1.54 kg (3.39 lbs)	• 1.28 kg (2.82 lbs)		• 1.67 kg (3.68 lbs)		• 2.58 kg (5.69 lbs)
	Diagnostic LEDs		• Link/Activity/Speed (per 10/100/1000 Mbps port)
	Certifications		• BSMI, CCC, C-Tick, CE Class A, VCCI Class A, FCC Class A, cUL, CE (LVD)
	MTBF	• 360,844 hours	• 317,412 hours		• 540,000 hours		• 481,624 hours