Denon DN-C680 Owner's Manual

IMPORTANT TO SAFETY

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION:

1. Handle the power supply cord carefully

2. Do not open the top cover

3. Do not place anything inside

NOTE:

LABELS

CERTIFICATION

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT

CLASS 1

LASER

PRODUCT

ADVARSEL: USYNLIG LASERSTRÅLING VED ÅBNING, NÅR

SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLING.

VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ

KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE LASERSÄTEILYLLE.

VARNING– OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA

BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING SOM ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SAFETY INSTRUCTIONS

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

NEC - NATIONAL ELECTRICAL CODE

4 5

ENGLISH DEUTSCH FRANCAIS ESPAÑOL



NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA / OBSERVAÇÕES QUANTO AO USO

✽

ENGLISH DEUTSCH FRANCAIS ESPAÑOL

ENGLISH

MAIN FEATURES

• 19 inch Rack Mountable (Height 3U)

• Large FL Display, Illuminated Rubber Button

• Track Search Select knob (Easy track selection)

• Jog/Shuttle Wheel

• Program Play (Max. 25 tracks)

• Play mode and Finish mode

q w e

• Auto Cue

• End Monitor

• End of Message (EOM) EOM

• Pitch Control (±9.9%, 0.1% step)

• Index Search

• AUTO SPACE

• AUTO EDIT

• Display of Playback Locations

• Rich Array of External Control Terminals

• ACD-25FSC (FS Converter Kit) Option

• ACD-27CS (External Synchronizing Kit) Option

ENGLISH

CONTENTS

x c

, . ⁄0 ⁄1

Checking the Contents

Installing the Units CAUTION:

• DECLARATION OF CONFORMITY

ENGLISH

PART NAMES AND FUNCTIONS

(1) Front Panel

POWER button

Disc holder

OPEN / CLOSE button

LEVEL control

PHONES jack

Ω

STOP button

STANDBY/CUE button

(Back Cue)

PLAY/PAUSE button

PROG. PLAY ON/OFF button

PROGRAM IN button

Select knob

PLAY MODE button

PITCH button

+ button

– button

END MON button

(End Monitor)

REPEAT button

A button

B button

ENGLISH

AUTO CUE button

(Auto Cue)

AUTO SPACE button

(Auto

Space)

AUTO EDIT button

(Auto Edit)

TIME button

INDEX button

FADER button

FINISH MODE button

SEARCH dial (inner side)

SCAN dial (outer side)

(2) Rear Panel

DIGITAL OUT (BALANCED) connector

DIGITAL OUT (UNBALANCED) jack

ANALOG OUT (BALANCE) connectors

NOTE:

LEVEL L/R controls

ANALOG OUT (UNBALANCED) jacks

ENGLISH

RS232C/RS422A connector

RS232C/RS422A selector switch

REMOTE connector

NOTE:

AC inlet

(3) Display

TRACK No. display

INDEX No. display

PLAY MODE indicators

TIME MODE indicators

NEXT No. display

Playing time display

Character display

Playing position display

PITCH display

EOM indicator

REPEAT indicator

PLAY LOCK indicator

PROGRAM indicator

ENGLISH

REMOTE CONTROL CONNECTIONS

OPENING AND CLOSING THE DISC HOLDER AND LOADING DISCS

(1) Opening and closing the disc holder

(2) Loading discs

12cm disc

8cm disc

CAUTION:

Do not place any foreign objects in the disc tray, and do not place more than one disc in the disc tray at a time. Doing so may result in malfunction. Do not push the disc tray in manually when the power is off, as this may result in malfunction and damage the player.

ENGLISH

BASIC OPERATION

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

PLAY/PAUSE

STANDBY/CUE

STOP

PUSH ENTER

ON/OFF IN

PROGRAMPROG. PLAY

STOP

INDEX

AUTO SPACE

AUTO EDIT RECUE

TIME

FINISH MODE

PITCH REPEAT

ABI

•

SCAN

•

-1

-2

6.7

-2

-1

395 4

PLAY MODE

END MON

AUTO CUE

FADER

(1) Before Starting Playback

Load a disc.

Make the presettings according to the usage purpose. (See Page 22.) NOTE: Steps 1 and 2 can be performed in the opposite

order.

Select the play mode.

Press the PLAY MODE button.

Select the play finish mode

When the finish mode is selected, the selected button lights.

To standby at the point where the sound begins

Press the AUTO CUE button.

NOTE: The A-B play mode cannot be set unless the A and B

points are set.

Single track play mode

Continuous play mode

A-B play mode

Lit

STOP

RECUE

FINISH MODE

The stop mode (the servo functions turn off) is set when playback finishes.

The standby mode is set at the beginning of the next track when playback is finished. * After the final track is played, the standby mode is

set at the beginning of the first track.

When playback is finished, the standby mode is set at the position at which playback was started.

AUTO CUE AUTO CUE

Lit

When a track is selected, the position at which the sound begins is found when a track is cued and the standby mode is set at that point.

7-2

8-1

Select the track to be played.

Turn the select knob ( 8 9 ).

To select an index number

Press the INDEX button.

Turn the select knob (

8 9 ).

To check the play start position

Press the PLAY/PAUSE button.

Press the STANDBY/CUE button.

To check the play end position

Press the END MON button

The selected track is cued and the standby mode is set.

INDEX INDEX

PUSH ENTER

TRACK NO. TRACK NO.

STANDBY/CUE STANDBY/CUE

Flashing during search Lit when in standby

Lit

The index select mode is set.

NOTE: The track select mode is set when the button is off.

There is no need to select an index number when you want to play the track from the beginning.

The selected index number is cued and the standby mode is set. If a non-existent index number is selected. No Sel. Index appears and the index number flashes.

Monitor the playback signals to check the play start position.

The pickup returns to the play start position and the standby mode is set. (Back Cue)

The end is monitored, then the pickup returns to the play start position and the standby mode is set. (End Monitor) NOTE: If the STANDBY/CUE button is pressed during the

end monitor operation, the end monitor operation is canceled, the pickup returns to the play start position and the standby mode is set.

PUSH ENTER

INDEX INDEX

STANDBY/CUE STANDBY/CUE

PLAY/PAUSE PLAY/PAUSE

STANDBY/CUE

STANDBY/CUE STANDBY/CUESTANDBY/CUE

END MON END MON

Flashing during search

Lit when in standby

Lit

Off

Lit

Flashing

Lit

ENGLISH

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

PUSH ENTER

ON/OFF IN

PROGRAMPROG. PLAY

STOP

INDEX

AUTO SPACE

AUTO EDIT RECUE

FADER

AUTO CUE

TIME

FINISH MODE

PLAY MODE

END MON

PITCH REPEAT

ABI

•

SCAN

•

10.11

PLAY/PAUSE

STANDBY/CUE

STOP

(2) Starting Playback

Start playback.

Press the PLAY/PAUSE button.

Playback begins and the playback signals are output.

OffLit

Flashing (indicates the playback position)

(3) Stopping Playback

When playback is stopped, the play finish mode set in step 4 above is set. Playback can be stopped in the following ways:

PLAY/PAUSE PLAY/PAUSE

STANDBY/CUE

STOP

STANDBY/CUESTANDBY/CUE

Lit

Playback is interrupted and the stop mode is set.

Flashing

Playback is interrupted, the pickup returns to the play start position and the standby mode is set.

Playback is interrupted and the pause mode is set at that point.

Flashing

Sleep mode

The sleep mode is set if no operation is performed for 30 minutes in the standby, pause or manual search mode. When in the sleep mode, press the PLAY/PAUSE button to search for the position before the sleep mode was set and start playback. Press the STANDBY/CUE button to search for the position before the sleep mode was set and standby at that point.

(4) PLAY / PAUSE and STANDBY/ CUE Operations

The operation switches between playback and pause each time the PLAY/PAUSE button is pressed. When the STANDBY/CUE button is pressed during playback, the pickup returns to the position at which playback was

started. The diagrams below show playback patterns when the PLAY/PAUSE and STANDBY/CUE buttons are pressed.

PLAY and PAUSE

When the PLAY/PAUSE button is pressed, playback starts and proceeds as shown by the arrow on the diagram above. If the PLAY/PAUSE button is pressed again during playback, the pause mode is set at that point. Press the PLAY/PAUSE button again to resume playback.

PLAY and CUE

When the STANDBY/CUE button is pressed after starting playback by pressing the PLAY/PAUSE button, the pickup returns to the position at which playback was started and prepares for the next playback. Press the PLAY/PAUSE and STANDBY/CUE buttons alternately to start playback repeatedly from the same position. This function is called Back Cue .

PLAY/PAUSE button pressed

Position on disc

Pause mode set at this point

Section

played

Section

played

Section

played

Section

played

PLAY/PAUSE button pressed

STANDBY/CUE button pressed

Position on disc

Back Cue

PLAY, PAUSE and CUE

If the pause mode is set and playback is then resumed, the position to which the pickup returns with the Back Cue function changes.

PLAY/PAUSE button pressed

Position on disc

STANDBY/CUE button pressed

Section

played

ENGLISH

HANDY OPERATIONS

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

STANDBY/CUE

STOP

PUSH ENTER

ON/OFF IN

PROGRAMPROG. PLAY

STOP

INDEX

AUTO SPACE

AUTO EDIT RECUE

FADER

AUTO CUE

TIME

FINISH MODE

PLAY MODE

END MON

PITCH REPEAT

ABI

•

SCAN

•

1-1,1

-2

PLAY/PAUSE

(1) Starting Playback from the Middle of a Track (Manual

Search)

When a track is selected and the PLAY/PAUSE button is pressed, playback starts from the beginning of that track. To start from a different position in the track, use the procedure described below to find the desired position.

1-1

1-2

Find the play start position.

Turn the SEARCH dial.

•

SCAN

•

Backward Forward

When the SEARCH dial (inner side) is turned, the frame move mode is set. The playback position moves one frame for each click.

Listen to the sound and find the desired play start position.

Turn the SCAN dial to change the playback position quickly.

To check the play start position:

Press the PLAY/PAUSE button.

Cue the play start position.

Press the STANDBY/CUE button.

•

SCAN

•

PLAY/PAUSE PLAY/PAUSE

Backward Forward

The fast forward/reverse mode is set when the SCAN dial (outer side) is turned. The speed changes according to the angle at which the dial is turned.

msf f f

When the dial is turned clockwise, the playback position moves as follows:

Lit

Playback starts.

Monitor the play signal to check the play start position.

LitFlashing

Lit

The pickup returns to the play start position and the standby mode is set.

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

PLAY/PAUSE

STANDBY/CUE

STOP

PUSH ENTER

ON/OFF IN

PROGRAMPROG. PLAY

STOP

INDEX

AUTO SPACE

AUTO EDIT RECUE

FADER

AUTO CUE

TIME

FINISH MODE

PLAY MODE

END MON

REPEAT

ABI

•

SCAN

•

-2

-1

PITCH

(2) Playing at a Different Speed (Pitch)

Use this function to play discs at different speeds.

The speed can be changed within the range of 9.9 to +9.9%.

1-1

1-2

Set the play speed.

(1) To increase the speed:

Press the + button.

(2) To decrease the speed:

Press the button.

Set the pitch play mode.

Press the PITCH button.

PITCH % PITCH % PITCH %

PITCH PITCH

The speed increases by 0.1% each time the button is

pressed. If the button is held in, the speed changes

continuously.

The speed decreases by 0.1% each time the button is

pressed. If the button is held in, the speed changes

continuously.

The button lights and the set play speed is set.

NOTE: When the PITCH button is lit, the play speed can be

changed by pressing the + and buttons.

NOTES:

When the play speed (PITCH) is set, the display shows the set pitch, but the disc is played at the standard speed until the PITCH button is pressed (and the button is lit). When the play speed is changed, the sampling frequency of the digital output signal also changes, so it may not be possible to receive digital signals.

Lit

ENGLISH

(3) Playing a Specific Section of the Disc (A-B Play)

Use this function to set the play start and end positions and only play the desired section of the disc.

NOTE: The A-B play mode cannot be set unless the A point, B point

or both the A and B points are set.

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

STANDBY/CUE

STOP

PUSH ENTER

ON/OFF IN

PROGRAMPROG. PLAY

STOP

INDEX

AUTO SPACE

AUTO EDIT RECUE

FADER

AUTO CUE

TIME

FINISH MODE

PLAY MODE

PITCH

•

SCAN

•

5,6

-4

2,(6-1,6-3)

4,6-1,6

-3

PLAY/PAUSE

END MON

REPEAT

Find the play start position (A point).

Turn the SEARCH or SCAN dial to find the desired play start position.

A A

Set the A point.

Press the A button.

Find the play end position (B point).

Turn the SEARCH or SCAN dial to find the desired play end position.

Lit

Set the B point.

Press the B button.

A A A

STANDBY/CUESTANDBY/CUE

Cue the A point.

Press the A button.

Standby appears on the character display. If the STANDBY/CUE button is pressed first, press the A button again.

Lit

* When setting the B point during playback, the B point can

only be set if the A point is set before it.

Lit

LitFlashing

Flashing

STANDBY/CUESTANDBY/CUE

BB B

To change the A-B section:

Press the B (or A ) button.

Standby appears on the character display.

Lit

LitFlashing

Flashing

To change the B point

6-2

Find the play end point (B point) (or play start point (A point)).

Turn the SEARCH dial to find the desired play end point.

BB B

Set the new B point (or A point).

Press the B (or A ) button.

6-3

LitFlashing

To change the B point

A A A

STANDBY/CUESTANDBY/CUE

Cue the A point.

Press the A button.

6-4

Standby appears on the character display.

Lit

Flashing

msf

TRACK NO.

INDEX A-B REMAIN NEXT NO.

PLAY MODE

Set the A-B play mode.

Press the PLAY MODE button.

Lit

A A

PLAY/PAUSE

Start playback.

Press the PLAY/PAUSE button.

Clearing the A and B points

The set A and B points are cleared when the disc is ejected. If the button is pressed while the A or B button is flashing, the button turns off, the set A or B point is cleared and the play mode is set to the single track play mode.

Playback starts from the A point and stops when the B point is reached.

A-B flashes on the display during the A-B play mode.

Lit

LitFlashing

NOTES:

The following happens if either the A or B point is not set:

If only the A point is set, the B point is automatically set at the end of the track for which the A point is set. If only the B point is set, the A point is automatically set at the beginning of the track for which the B point is set.

If the playing time of the A-B section is shorter than the total of the set fade in and fade out times, the fade in and fade out settings are ignored.

When the B point is before the A point, the section from the B point to the A point is played.

A-B play mode

ENGLISH

(4) Playing Repeatedly (Repeat)

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

STANDBY/CUE

PUSH ENTER

ON/OFF IN

PROGRAMPROG. PLAY

STOP

INDEX

AUTO SPACE

AUTO EDIT RECUE

FADER

AUTO CUE

TIME

FINISH MODE

END MON

PITCH REPEAT

ABI

•

SCAN

•

4,5

3,5

2,6

STOP PLAY/PAUSE

PLAY MODE

Select the play mode.

Press the PLAY MODE button.

PLAY MODE

SINGLEA-B

Lit

NOTE: The A-B repeat mode cannot be set unless the A

point, B point or both the A and B points are set.

REPEAT REPEAT

REPEAT

Select the repeat mode.

Press the REPEAT button.

The button lights, and the repeat mode is set.

STANDBY/CUE STANDBY/CUESTANDBY/CUE

Standby at the play start position.

Press the STANDBY/CUE button.

Start playback.

Press the PLAY/PAUSE button.

Repeat playback starts.

The pickup returns to the play start position and the standby mode is set.

Lit

Flashing

Lit

Off

Lit

Stopping playback Playback can be stopped in the following ways:

PLAY/PAUSE PLAY/PAUSE

STANDBY/CUE

STOP

STANDBY/CUESTANDBY/CUE

Playback is interrupted and the stop mode is set.

Flashing

Lit

Playback is interrupted, the pickup returns to the play start position and the standby mode is set.

Playback is interrupted and the pause mode is set at that point.

Flashing

Canceling the repeat mode during playback

Press the REPEAT button.

REPEAT REPEAT REPEAT

REPEAT REPEAT

The normal play mode resumes and playback continues to the play end point.

Lit

Off

A-B repeat play

If playback is started before the A point, playback continues to the B point, then returns to the A point for repeat playback.

If playback is started after the B point, playback continues to the end of that track and nothing is repeated.

Play start point

A point

B point

Section played

repeatedly

A point B point

Play start point

End of track

Section played

NOTES:

When the B point is before the A point, the section from the B point to the A point is played repeatedly.

The repeat mode cannot be set when the AUTO EDIT button is lit.

A pointB point

Section played

repeatedly

To play the single selected track repeatedly:

To play all the tracks on the disc repeatedly:

To play the set section repeatedly:

ENGLISH

(5) Inserting Blank Spaces Between Tracks (Auto Space)

Use this function to insert blank spaces of 4 seconds between tracks during continuous playback.

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

PLAY/PAUSE

STANDBY/CUE

STOP

PUSH ENTER

ON/OFF IN

PROGRAMPROG. PLAY

STOP

INDEX

AUTO SPACE

RECUE

FADER

AUTO CUE

TIME

FINISH MODE

PLAY MODE

END MON

PITCH REPEAT

ABI

•

SCAN

•

3 2,4

AUTO EDIT

Load a disc.

AUTO SPACE AUTO SPACE

Set the auto space mode.

Press the AUTO SPACE button.

Lit

PLAY/PAUSE PLAY/PAUSE

AUTO SPACE AUTO SPACE

Start playback.

Press the PLAY/PAUSE button.

Lit

The playback signals are output as follows:

Flashing Flashing

Playback of track 1

Blank space (4 seconds) Blank space (4 seconds)

AUTO SPACE AUTO SPACE AUTO SPACE

Cancel the auto space mode.

Press the AUTO SPACE button.

NOTE:

When non-consecutive tracks are played (when the search operation is performed), a blank space of over 4 seconds may be inserted automatically.

Lit Off

(6) Dividing the Playing Time in Two (Auto Edit)

Use this function to divide the total playing time of the disc into side A (first half) and side B (second half).

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

PLAY/PAUSE

STANDBY/CUE

STOP

PUSH ENTER

ON/OFF IN

PROGRAMPROG. PLAY

STOP

INDEX

AUTO SPACE

RECUE

FADER

AUTO CUE

TIME

FINISH MODE

PLAY MODE

END MON

PITCH REPEAT

ABI

•

SCAN

•

4,5 3 2,6

AUTO EDIT

Load a disc.

AUTO EDIT

Set the auto edit mode.

Press the AUTO EDIT button.

A B

To check the playing time for side B:

Press the B button.

First track and playing time for side A

Press the A button to display the playing time for side A. Press the B button to display the playing time for side B.

PLAY/PAUSE PLAY/PAUSE

Start playing side A.

Press the PLAY/PAUSE button.

When playback of side A is finished, the pause mode is set at the starting position for side B.

First track and playing time for side B

Lit

Off

Lit

Start playing side B.

Press the PLAY/PAUSE button.

When playback of side B is finished, the pickup returns to the starting point for side A and the standby mode is set. (at Finish mode Next or Recue) When playback of side B is finished, the servo functions turn off.

To cancel the auto edit mode:

Press the AUTO EDIT button to cancel the auto edit mode and return to normal playback. (at Finish mode Stop)

Lit

Flashing

Playback of track 2 Playback of track 3

ENGLISH

PROGRAMMED PLAYBACK

The tracks can be programmed to play in a certain order. Up to 25 tracks can be programmed. Programmed playback is performed according to the play mode (single or continuous) and finish mode (stop, next or recue) settings.

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

PLAY/PAUSE

STANDBY/CUE

STOP

PUSH ENTER

ON/OFF IN

PROG. PLAY

STOP

INDEX

AUTO SPACE

AUTO EDIT RECUE

FADER

AUTO CUE

TIME

FINISH MODE

PLAY MODE

END MON

PITCH REPEAT

ABI

•

SCAN

•

1,5,6

2,3,4,7,8,9

-1,9-2

PROGRAM

(1) Inputting the Program

Set the program input mode.

Press the PROGRAM IN button.

PROGRAM

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

Flashing

Select the track to be programmed.

Turn the select knob ( 8 9 ).

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

When track 3 is selected:

The step number flashes.

Selected track number

Flashing

Enter the selected track in the program.

Press the select knob.

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

The number of the next step in the program is displayed.

Lit

Enter the next track in the program.

Press the select knob.

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

The time display shows the total playing time for the program.

Flashing

Repeat steps 2, 3 and 4 to program the tracks in the desired order.

Exit the program input mode.

Press the PROGRAM IN button.

PROGRAM

The set returns to the normal mode.

LitFlashing

(2) Changing the Program

9-2

9-1

Set the program edit mode.

Press the PROGRAM IN button.

PROGRAM

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

Flashing

Select the step number to be edited.

Turn the select knob ( 8 9 ).

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

To edit the third step in the program:

The step number lights.

Lit

Set the program change mode.

Press the select knob.

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

The step number to be edited flashes.

To change the track: Select the track to be changed.

Turn the select knob ( 8 9 ).

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

Selected track number

When track 7 is selected:

Enter the selected track.

Press the select knob.

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

To continue editing the program, repeat steps 7, 8, 9-1 and 9-2.

Flashing

The number of the next step in the program lights.

To exit the program editing mode, press the PROGRAM IN button. The set returns to the normal mode.

ENGLISH

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

PLAY/PAUSE

STANDBY/CUE

STOP

PUSH ENTER

ON/OFF IN

PROG. PLAY

STOP

INDEX

AUTO SPACE

AUTO EDIT RECUE

FADER

AUTO CUE

TIME

FINISH MODE

PLAY MODE

END MON

PITCH REPEAT

ABI

•

SCAN

•

15 12

-2

13 11

-2

11-1,11-3,11-4,12

-1

PROGRAM

-1

Inserting a track in the program Select the position at which to insert a track.

Turn the select knob ( 8 9 ).

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

To insert a track at the third step in the program:

Lit

Set the program insert mode.

Press the + button.

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

The step number flashes.

Select the track to be inserted.

Turn the select knob ( 8 9 ).

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

When track 8 is selected:

Number of selected track

Flashing

Enter the selected track.

Press the select button.

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

The number of the next step in the program lights.

To insert more tracks in the program, repeat steps 11-1, 11- 2, 11-3 and 11-4. (To exit the program insert mode, press the PROGRAM IN button.)

Deleting tracks from the program Select the step to be deleted.

Turn the select knob ( 8 9 ).

PUSH ENTER

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

To delete the track at the third step:

Lit

Delete that track from the program.

Press the button.

msf

TRACK NO.

INDEX SINGLE REMAIN NEXT NO.

The next step number lights.

Number of track at the next step in the program

To continue deleting tracks from the program, repeat steps

12-1 and 12-2.

Exit the program editing mode.

Press the PROGRAM IN button.

PROGRAM

(3) Playing Programs

Lit

Flashing

Set the program play mode.

Press the PROG. PLAY button.

ON/OFF

PROG. PLAY

msf

TRACK NO.

PROGRAM

INDEX SINGLE REMAIN NEXT NO.

ON/OFF

PROG. PLAY

STANDBY/CUESTANDBY/CUE

Number of next step

Lit

Flashing

The first track in the program is cued and the standby mode is set.

Lit

Start programmed playback.

Press the PLAY/PAUSE button.

PLAY/PAUSE PLAY/PAUSE

STANDBY/CUE

Lit

Off

Programmed playback starts.

When the disc is ejected, the set program is cleared. If a track that is not in the program is selected with a serial command during programmed playback, that command is ignored.

NOTE:

Programs cannot be input when no disc is loaded.

ENGLISH

(4) Presetting Programs

Programs can be stored in the preset memory. When a disc for which a program is preset is loaded, the programmed playback mode is set automatically. Programs can be stored for up to three discs.

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

PLAY/PAUSE

STANDBY/CUE

STOP

PUSH ENTER

ON/OFF IN

PROGRAMPROG. PLAY

STOP

INDEX

AUTO SPACE

AUTO EDIT RECUE

FADER

AUTO CUE

TIME

FINISH MODE

END MON

PITCH REPEAT

ABI

•

SCAN

•

-4

2-2,2

-3

PLAY MODE

Input the program.

Follow the instructions under (1) Inputting the Program to input the program. (See Page 19.)

2-1

Set the preset mode.

Follow the instructions under (2) Presetting Procedure to set the preset mode. (See Page 23.)

Select the preset item.

Turn the select knob to select Program1 (or Program2 or Program3 ).

PUSH ENTER

Select one of these.

Character display

Before change After change

To play a preset disc: Load a disc for which a program is preset.

PROGRAM

ON/OFF

PROG. PLAY

STANDBY/CUE

msf

TRACK NO.

PROGRAM

INDEX SINGLE REMAIN NEXT NO.

The pickup searches for the first programmed track and the standby mode is set.

2-3

Change the preset setting.

Press the select knob.

PUSH ENTER

The character display changes as follows:

Cancel the preset mode.

Press the PLAY MODE button.

PLAY MODE

The preset setting mode is canceled and the set returns to the normal mode.

Lit

Lit Lit

Start programmed playback.

Press the PLAY/PAUSE button.

PLAY/PAUSE PLAY/PAUSE

STANDBY/CUE

Lit Off

Programmed playback starts.

ENGLISH

PRESET FUNCTIONS AND OPERATIONS

(1) List of Preset Functions

Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent memory, so they are not cleared even when the power is turned off. The functions shown on the table below can be preset. Set the functions according to the usage purpose to efficiently achieve even higher quality playback. One of the preset functions can be used to display information on this set (microprocessor version).

Preset function type Description

Character display

(as set upon shipment from factory)

No.

Preset type Auto cue

Selection of preset type Setting of audio startup level for auto cue function

Preset Type 1 1

CueDet. 60db 2 Auto stop Setting of whether or not to automatically stop the servo functions Sleep ON 3 FS converter Setting of whether or not to use the FS converter and sampling frequency

setting (when optional FS converter mounted)

FS OFF 4

Program 1 Setting of whether or not to play program 1 Program1 OFF 5 Program 2 Setting of whether or not to play program 2 Program2 OFF 6 Program 3 Setting of whether or not to play program 3 Program3 OFF 7 Digital output Selection of output signal format D.Out Pro 8 Digital output Selection of whether or not to output subcodes Subcode OFF 9 End monitor Setting of whether or not to use the end monitor function and monitor time

setting

End Mon. 10sec 10

E.O.M. Setting of whether or not to display the EOM and display time setting E.O.M. 10sec 11 Next track standby Setting of whether or not to standby at the next track when the STANDBY/

CUE button is pressed during playback

NextStb.OFF 12

Fade in time Fade in time setting Fadein OFF 13 Fade out time Fade out time setting FadeOut OFF 14 Play speed Standard playing speed setting Normal Speed 15 Delay start Delay start time setting Delay OFF 16 Play lock Selection of whether or not to inhibit the panel switches during playback PlayLock OFF 17 Frame display Selection of whether or not to display frames FR Disp ON 18 CDR disc Selection of whether or not to play CDR discs which do not include a TOC CD-R TOC 19 CDR disc Selection of whether or not to play skip tracks on CDR discs CD-R Skip OFF 20 Serial remote Baud rate setting 9600bps 21 Switch protect Selection of whether or not to enable the panel switches Switch ENA 22 Player ID Selection of whether or not to set player IDs and selection of ID number PlayerlD OFF 23 Parallel remote Selection of whether or not to accept parallel remote signals Remote ENA 24 Parallel remote Selection of whether or not to output standby tally ST.Tally ON 25 Parallel remote External control tally output signal setting lndex2 Tally 26 Parallel remote Fader start mode selection Fader Pause 27 Stereo/mono Selection of stereo or monaural playback Stereo 28 Pos Code Selection of whether or read Pos codes Pos OFF 29 Preset clear Setting for clearing presets and setting them to the initial values Init. Preset 30 Set information Microprocessor version display Ver. ****(* = number) 31

External synchronizing signal

Selection of external synchronizing signal (When optional synchronizing kit mounted)

Sync OFF

33Frame rate

Selection of time code and video signal frame per second(fps) (When optional synchronizing kit mounted)

29.97fps DRF

LTC time code

Selection of LTC time code synchronizing operation (When optional synchronizing kit mounted)

LTC OFF

35Protocol type

Selection of serial remote protocol (When optional synchronizing kit mounted and LTC time code setting is set to LTC ON )

Type BVW75

36Synchronizing operation mode

Selection of synchronizing operation mode with LTC time code (When optional synchronizing kit mounted and LTC time code setting is set to LTC ON )

Chase

Synchronizing operation time memory mode

Selection of method of setting start time for synchronizing operation with LTC time code (When optional synchronizing kit mounted and LTC time code setting is set to LTC ON )

Auto Memory

Synchronizing operation time

election of start time for synchronizing operation with LTC time code

(When optional synchronizing kit mounted and LTC time code setting is set to LTC ON )

10h00m00s00f

NOTE:

For CD-R discs without TOCs, there are no pits (signals) at the discs lead in and lead out sections, so errors may occur, particularly when searching for tracks. If an error should occur, open the disc holder, then close it and perform the operation again.

When presettings are made, the time display set with the TIME button, the play mode set with the PLAY MODE button and the finish mode set with the FINISH MODE button at that time are stored in the memory. These modes will be set when the power is next turned on.

ENGLISH

(2) Presetting Procedure

Functions can be preset using the buttons on the front panel. The presettings can also be set using serial remote signals (RS232C/RS422A). Make the presettings with no disc loaded, in the stop or standby mode.

OPEN/CLOSE

ON OFF

POWER

PROFESSIONAL CD PLAYER DN-C680

PHONES

MIN MAX

LEVEL

PRESET

PLAY/PAUSE

STANDBY/CUE

STOP

PUSH ENTER

ON/OFF IN

PROGRAMPROG. PLAY

STOP

INDEX

AUTO SPACE

AUTO EDIT RECUE

FADER

AUTO CUE

TIME

FINISH MODE

END MON

PITCH REPEAT

ABI

•

SCAN

•

1,4

2,31

PLAY MODE

Enter the preset mode.

Press the STANDBY/CUE button while pressing the PLAY MODE button.

PLAY MODE

STANDBY/CUE

Preset Mode

Select the preset item.

Turn the select knob ( 8 9 ).

PUSH ENTER

Character display

Turn the knob clockwise to move in the direction of the arrows, counterclockwise to move in the opposite direction.

NOTE: The first preset item displayed is the last preset item

displayed the last time the presettings were made.

Change the preset values.

Press the select knob.

Character display

Exit the preset mode.

Press the PLAY MODE button.

PLAY MODE

To set the presettings back to the initial settings (the settings set upon shipment from the factory), turn the power on while holding in both the PLAY MODE and the END MON buttons. For the initial settings, refer to (1) List of preset functions .

The preset mode is canceled and the set returns to the previous mode.

PLAY MODE END MON

The character display changes as shown below.

NOTE:

If the message shown below appears, there is a problem with the preset memory. Contact a serviceperson.

Before change After change

PUSH ENTER

The character display changes as shown below.

Initial Error

ENGLISH

(3) Detailed Description of Preset Functions

(* = initial setting)

1) Preset Type (*) (Three different sets (types) of presettings can be made and used for different purposes.) * Preset Type1 : Set to preset type 1.

Preset Type2 : Set to preset type 2. Preset Type3 : Set to preset type 3.

2) CueDet. ( **)dB

CueDet. ( **)dB : Set the audio detection level for cueing. ( 72/ 66/* 60/ 54/ 48/ 42/ 36)

3) Sleep ON (OFF) * Sleep ON : Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby or

manual search mode.

Sleep OFF : Do not automatically turn the servo functions off.

4) FS OFF (***kHz) (This setting can only be made when an optional FS converter is mounted.) * FS OFF : Do not use the FS converter.

FS (***kHz) : Select the digital output FS. (32kHz/44.1kHz/48kHz)

5) Program1 OFF (ON)

Program1 OFF (ON) : Store the contents of program 1 when on. (Initial setting OFF)

6) Program2 OFF (ON)

Program2 OFF (ON) : Store the contents of program 2 when on. (Initial setting OFF)

7) Program3 OFF (ON)

Program3 OFF (ON) : Store the contents of program 3 when on. (Initial setting OFF)

8) D.Out Pro (Cons) * D.Out Pro : Output digital signals in AES/EBU format.

D.Out Cons : Output digital signals in consumer format.

9) Subcode ON (OFF) (When D.Out Cons is set above, subcodes can be output with the digital output signals.)

Subcode ON : Output subcodes with the digital output signals. (consumer SPDIF format)

* Subcode OFF : Do not output subcodes with the digital output signals. (consumer IEC 958 Type II format) NOTE: 0 sec. start is not possible when the above is set to Subcode ON .

10) End Mon. (**)sec

End Mon. (**)sec : Set the end monitor time. (5/*10/15/20/25/30/35) End Mon. OFF : Do not use the end monitor function.

11) E.O.M. (**)sec (Output EOM tally signal to remote pint (24))

E.O.M. (**)sec : Set the EOM time. (0/5/*10/15/20/25/30) E.O.M. OFF : Do not use the EOM function.

12) Next Stb.Off (ON) * Next Stb.OFF : Return to the play start position and standby when the STANDBY/CUE button is pressed during playback.

Next Stb.ON : Standby at the beginning of the next track when the STANDBY/CUE button is pressed during playback.

13) FadeIn OFF (***s)

FadeIn OFF (***s) : Set the fade in time. (*OFF/10m/50m/0.1/0.5/1/2)

14) FadeOut OFF (***s)

FadeOut OFF (***s) : Set the fade out time. (*OFF/10m/50m/0.1/0.5/1/2)

15) Normal (+/ ***%) Speed * Normal Speed : Play at normal speed.

(+/ ***%) Speed : Play at variable speed. ± (0.2/0.4/0.6/0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0)

16) Delay OFF (***ms)

Delay OFF (***ms) : Set the time for delayed start after the play start operation. (*OFF/100m/200m/300m)

17) PlayLock ON (OFF)

PlayLock ON : Inhibit all operations other than the PLAY/PAUSE, TIME and PLAY MODE buttons during playback.

* PlayLock OFF : Enable all functions during playback.

18) FR Disp ON (OFF) * FR Disp ON : Display the frames on the time display during playback.

FR Disp OFF : Do not display the frames on the time display during playback.

(The frames are displayed in the manual search, standby, pause and end monitor modes.)

19) CD-R TOC (NO TOC) * CD-R TOC : Play normal CD-R discs containing TOCs.

CD-R NO TOC : Play CD-R discs not containing TOCs.

ENGLISH

20) CD-R SkipON (OFF)

CD-R SkipON : Play skip tracks on CD-R discs.

* CD-R SkipOFF : Do not play skip tracks on CD-R discs.

21) 9600 (19200) bps * 9600 bps : Set the baud rate to 9600 bps.

19200 bps : Set the baud rate to 19200 bps.

22) Switch ENA (INH) * Switch ENA : Enable operation of all the switches on the front panel.

Switch INH : Inhibit operation of all panel switches other than those used for presetting operations.

23) Player ID (**)

Player ID (**) : Set the player ID.

(The ID can be set to OFF or to 0 to 15. The initial setting is OFF .)

24) Remote EMA (INH) * Remote EMA : Enable input of control signals to the parallel remote connector.

Remote INH : Inhibit input of control signals to the parallel remote connector.

25) St. Tally ON (OFF) * St. Tally ON : Output standby tally from parallel remote connector.

St. Tally OFF : Do not output standby tally from parallel remote connector.

26) (******) Tally * INDEX2 Tally : Output index 2 tally signal to remote pin (17).

INDEX3 Tally : Output index 3 tally signal to remote pin (17).

27) Fader Pause (Play) * Fader Pause : Start playback when remote fader pins (9-10) are short-circuited and pause when pins are open.

Fader Play : Start playback when remote fader pins (9-10) are short-circuited and continue playback when pins are open.

28) Stereo (Mono) * Stereo : Output L and R stereo signals from the output connector.

Mono : Output mixed L and R signals from the output connector.

29) Pos ON (OFF)

Pos ON : Read Pos codes on CD and CD-R discs.

* Pos OFF : Do not read Pos codes on CD and CD-R discs.

30) Preset CIr? (Init. Preset)

Preset CIr? : Clear the presettings (set to the initial factory values).

* Init. Preset : Do not clear the presettings.

31) Ver. xxxx : Display the microprocessor version, ( xxxx is a number.)

32) Sync OFF(Word,Video) (This setting can only be made when an optional synchronizing kit is mounted.) * Sync OFF : Operation according to internal clock.

Sync Word : Synchronizing by word clock. Sync Video : Synchronizing by video signal.

33) 29.97fps DRF(29.97fps NDF,30fps,25fps) (This setting can only be made when an optional synchronizing kit is mounted.) * 29.97fps DRF : NTSC color,drop frame mode.

29.97fps NDF : NTSC color,non-drop frame mode. 30fps : NTSC black & White,non-drop frame mode. 25fps : PAL/SECAM

34) LTC OFF(ON) (This setting can only be made when an optional synchronizing kit is mounted.) * LTC OFF : Synchronizing operation not performed.

LTC ON : Synchronizing operation performed.

35) Type BVW75(PCM7050) (This setting can only be made when an optional synchronizing kit is mounted.) * BVW75 : Set the protocol type to BVW75.

PCM7050 : Set the protocol type to PCM7050.

36) Chase(Auto Start) (This setting can only be made when an optional synchronizing kit is mounted.) * Chase : Playback locked to LTC time code.

Auto Start : Only start of playback performed when matched with set time code.

37) Auto Memory(Manual Memory) (This setting can only be made when an optional synchronizing kit is mounted.) * Auto Memory : Set automatically when PLAY/PAUSE button pressed during LTC time code input.

Manual Memory : Set by inputting in units of hours,minutes,seconds and frames.

38) 10h00m00s00f (This setting can only be made when an optional synchronizing kit is mounted.) * 10h00m00s00f : Display of hours(h),minutes(m),seconds(s) and frames(f).

ENGLISH

BEFORE SWITCHING OFF THE POWER

When you have finished using the CD player, before switching off the power be sure that the disc holder has been closed with the OPEN/CLOSE button.

CAUTION:

Do not forcibly close the disc holder when the power is off. It may damage the unit when it is transported.

Do not switch off the power when the disc holder is open.

POWER OFF

Switch off the power after the disc holder has been closed with the OPEN/CLOSE button.

POWER OFF

COMPACT DISCS

(1) Precautions on handling compact discs

Do not allow fingerprints, oil or dust to get on the surface of the disc. If the disc is dirty, wipe it off with a soft dry cloth. Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths to clean discs. Always handle discs carefully to prevent damaging the surface; in particular when removing a disc from its case or returning it. Do not bend the disc. Do not apply heat. Do not enlarge the hole in the center of the disc. Do not write on the label (printed side) with a hard-tipped implement such as a pencil or ball point pen. Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in winter. Do not attempt to dry the disc with a hair dryer, etc.

(2) Precaution on storage

After playing a disc, always unload it from the player. Always store the disc in the jewel case to protect from dirt or damage. Do not place discs in the following areas:

1) Areas exposed to direct sunlight for a considerable time.

2) Areas subject to accumulation of dust or high humidity.

3) Areas affected by heat from indoor heaters, etc.

ENGLISH

GENERAL

Type: CD Player Disc type: Standard Compact Discs (12 cm, 8 cm/5 , 3 )

AUDIO SECTION

Channels: 2 channels (Stereo), 1 channel (Mono) Sampling Frequency: 44.1 kHz (32/48 kHz available using optional ACD-25FSC) Digital Filter: 18 bit 8-times oversampling Digital filter Frequency Response: 5 to 20,000Hz (±1.0dB) Total Harmonic Distortion: 0.003% (1 kHz, 0 dB playback, A filter) Signal to Noise Ratio: 105 dB (1 kHz, 0 dB playback, A filter) Channel Separation: 100 dB (1 kHz, 0 dB playback, A fitter) Analog Output: 1 kHz, 0 dB playback

Transfer and Connector: Balanced active, XLR connector

Unbalanced, RCA jack

Output Level: Balanced: +18 dBs, 600 Ω/ohms

Unbalanced: 2 Vrms, 10 kΩ/kohms

Output Level Adjust Range: +22 dBs to 20 dBs (Balanced) Headphone Output: 20 mW (30 to 40 Ω/ohms)

Digital Output

Transfer and Connector: Balanced active, XLR connector (1. Common 2. Cold 3. Hot)

Unbalanced, RCA jack

Signal Format: AES/EBU or IEC 958 Type II or SPDIF Output Level: Balanced: 3 Vp-p, 110 Ω/ohms

Unbalanced: 0.5 Vp-p, 75 Ω/ohms

Variable Pitch Control: ±9.9% max. Audio Start-up Time: 0.01 second less Frame Search Accuracy: 1 frame (1/75 second)

DIMENSIONS: 482(W) x 132(H) x 297(D)mm

(19.0 x 5-13/64 x 11-11/16 )

WEIGHT: 7.0 kg, 15.4 lbs POWER CONSUMPTION: 19 W POWER SUPPLY: AC 120 V ±10%, 60 Hz (U.S.A. and Canada)

AC 230 V ±10%, 50 Hz (Europe, Asia, Others)

ENVIRONMENTAL CONDITIONS

Operating Temperature: +5 C to 35 C Humidity: 25% to 85%, non condensing Storage Temperature: 20 C to 60 C

REMOTE

Serial Remote: RS232C/RS422A (switchable), D-sub 9-pin Parallel Remote: D-sub 25-pin

TROUBLESHOOTING

When you think the player might be broken, please check the following items.

The disc holder does not open or close.

Is the power switch set to ON? Is the player in the process of playing a disc? Seepage 12

The display still indicates “—” when a disc is loaded.

Is the disc loaded properly? Is the disc dirty or scratched?

There is no sound or the sound is distorted.

Are the output cables connected to the amplifier correctly? Is the adjustment of the amplifiers controls and switching correct?

The specified portion of the disc cannot be played back correctly.

Is the disc dirty or scratched?

There is a button that doesn’t function.

Has a preset such as PLAY-LOCK been set? Seepage 25

SPECIFICATIONS

* Specifications and design are subject to change without notice for purpose of improvement.

Pin No. U.S.A. & Canada

Europe & Asia & Others

1 Common

Common

2 Cold

Hot

3 Hot

Cold

DEUTSCH

HAUPTMERKMALE

• 19”-Rack-Montage (Höhe 3 U)

• Großes Flüssigkristall-Display, beleuchtete Gummitasten

• Titelsuchlauf-Wähler (Einfache Titelanwahl)

• Jog-/Shuttle-Rad

• Programmierte Wiedergabe (max. 25 Titel)

• Wiedergabe- und Wiedergabe-Beendigungsmodus

q w e

• Auto Cue

• Titelende-Überwachung

• Avisierung des Titelendes (EOM)

EOM

• Tonhöhensteuerung (±9,9%, 0,1% Schritt)

• Index-Suchlauf

• AUTOSPACE

• AUTOEDIT

• Anzeige der Wiedergabepositionen

• Großzügige Anordnung der externen Steuerungsbuchsen

• ACD-25FSC-Option (FS-Konverter-Satz)

• ACD-27CS (Externer Synchronisations-Kit) Option

+ 62 hidden pages