Denon DN-A100P User Manual

DN-A100P

Integrated amplifier

Product Overview:

The DN-A100P is the P Series' entry level amplifier for commercial

installation. Uncomplicated layout and simple operation, along with 70w

per channel power output make it an entirely suitable option for two

channel amplification in pubs, bars, shops, gyms and other small to

medium sized av environments.

Key Features:

- 70w per channel (4ohms)

2 speaker cir

IR control (supplied RC1022 IR controller)

- 5 line inputs – RCA/ Cinch (remote switching)

2 tape cir

- Phono input (mm)

- Tone controls

- 3U

cuits with A/B switching

cuits (in/out)

Applications:

- BGM (Background music)

- Education

- Corporate AV

- Fitness

- Retail & Leisure

DN-A100P

Integrated amplifier

Specifications:

eneral

Power outlet 1 switched outlet, total capacity 100 W (0.43 A) Power Supply AC 230 V, 50 Hz Power Consumption 185 W (IEC) Dimensions excluding 19” rack kit Width 434 mm Height 121 mm Depth 307 mm 19” rack kit height 3U Weight 6.5 kg

Power amplifier section

Rated Output Power 2-channel driving (CD Ô SP OUT), 45 W + 45 W (8 ohms, 20 Hz ~ 20 kHz, T.H.D. 0.07% Dynamic power 70 W + 70 W (4 ohms, DIN, 1 kHz, T.H.D. 0.7% High frequency distortion 0.02% (Rated output: -3 dB), 8 ohms, 1 kHz Output ter

Pre-amplifier section

Equalizer amplifier output 150 mV (REC OUT terminals) Input Sensitivity/Input Impedance PHONO (MM): 2.5 mV/47 kohms, CD, TUNER, DVD/AUX, TAPE-1/CD-R,

RIAA Deviation PHONO (MM): 20 Hz ~ 20 kHz±0.5 dB

minals Speaker A or B: 4 ~ 16 ohms, A + B: 8 ~ 16 ohms Suited for headphones/stereo headphones

TAPE-2/MD: 100 mV/47 kohms (SOURCE DIRECT OFF), 100 mV/16 kohms (SOURCE DIRECT ON)

Overall performance

SN Ratio (A network) PHONO (MM): 84 dB, (With input terminals short-circuited, 5 mV input signal)

CD, TUNER, DVD/AUX, TAPE-1/CD-R, TAPE-2/MD, 105 dB (input terminals short-circuited Tone control (bass): BASS: 100 Hz±8 dB, TREBLE: 10 kHz±8 dB LOUDNESS 100 Hz: +6 dB, 10 kHz: +6 dB

Remote control unit (RC-1022)

Remote control type Infrared pulse Power supply R03/AAA Type (2 batteries)

nal dimensions

Exter Weight 120g (including batteries)

In the box:

• User Manual • Rackmount • Remote control (inc batteries )

49 (W) x 220 (H) x 21 (D) mm

Product Image:

* For purposes of improvement, specifications and design are subject to change without notice.

www.dm-pro.eu/dna100p