|
Operating Instructions for Your Cobra® microTALK® |
|
2-WAY RADIO MODEL FRS 104 |
|
Guide d’utilisation du poste de radio |
|
ÉMETTEUR-RÉCEPTEUR MODÈLE FRS 104 |
|
microTALK® de Cobra® |
|
Instrucciones de uso del |
|
RADIO BIDIRECCIONAL MODELO FRS 104 |
|
Cobra® microTALK® |
Nothing comes |
|
close to a Cobra™ |
|
Rien n’est comparable |
English, pages 1-8 |
|
à un Cobra™ |
Français, pages 9-16 |
Nada se compara a Cobra™ |
Español, páginas 17-22 |
P R O D U C T F E AT U R E S |
ENGLISH |
Antenna
belt clip
POWER VOLUME BUTTON button
CHANNEL SELECT
button
CALL button
This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
FCC Warnings: Replacement or substitution of transistors, regular diodes or other parts of a unique nature, with parts other than those recommended by Cobra®, may cause a violation of the technical regulations of part 95 of the FCC Rules, or violation of Type Acceptance requirements of Part 2 of the Rules.
INDUSTRY CANADA NOTICE:
Operation is subject to the following two conditions:
1)this device may not cause interference, and
2)this device must accept any interference, including interference
that may cause undesired operation of the device.
«IC» before the equipment certification number signifies that the Industry Canada technical specifications were met. It does not guarantee that the certified product will operate to the user’s satisfaction.
LOCK tab
battery compartment
TALK button
LIGHT/MAX
RANGE button
ENGLISH |
I N T R O D U C T I O N |
Product Features
•TWO-WAY RADIO with up to a 2 mile (3 km) range
•14 CHANNELS
•BATTERY SAVER circuitry
•CALL ALERT
•“ROGER BEEP” confirmation tone
•AUTO SQUELCH
•MAXIMUM RANGE extender
•BACKLIT LCD display
•BELT CLIP
Making Life Easier and Safer
People have found lots of convenient and helpful ways to use their microTALK® radios. Over time, you’re bound to discover uses of your own. For example, you can...
•stay in touch with others while hiking, bicycling, etc.
•keep track of family and friends in a shopping mall
•communicate between different floors of a building
•talk with neighbors
•check with traveling companions in another car
•arrange a meeting spot at crowded public events
Caring for Your microTALK® Radio
Your microTALK® radio will give you years of trouble-free service if cared for properly. Here are a few suggestions: 1) Handle the radio gently, 2) Keep it away from dust, 3) Never put the radio in water or in a damp place and 4) Avoid exposure to extreme temperatures.
Installing or Replacing Batteries
1. Pull down the LOCK tab to remove the battery compartment cover.
LOCK tab
2. Insert four AAA batteries. (Always use high quality alkaline batteries.) Position batteries according to polarity markings.
(NOTE: See page 8 for information about optional battery pack and desktop charger accessories.)
1 |
2 |
O P E R AT I O N |
ENGLISH |
Turning On Your microTALK® Radio
1. Press and hold the ON/OFF POWER button for 2 seconds. A series of audible
tones will indicate the radio is on.
ON/OFF
POWER button
2. Your microTALK® is now in Standby mode, ready to receive transmissions. The radio is always in Standby mode except when the TALK or CALL buttons are pressed.
Battery Low
When battery power is low, the BATT LOW indicator will blink.
Selecting a Channel
1. With the radio on, select any of the
14 channels by pushing the CHANNEL SELECT button up or down (NOTE: Both radios must be tuned to the same channel
to communicate.)
CHANNEL SELECT button
Calling Another Person
To alert another person that you are calling: 1. Press and release the CALL button.
The other person will hear a 2-second ringing tone. You cannot send or receive transmissions during the 2-second call tone.
CALL button
Auto Battery Save
Your microTALK® radio has a unique circuit designed to extend battery life. If there are no transmissions within 10 seconds, the unit will automatically switch to Battery Save mode. This will not affect the unit’s ability to receive incoming transmissions.
ENGLISH |
O P E R AT I O N |
Talking to Another Person |
Listening for a Response |
1. Press and hold the TALK button.
TALK button
2. With the microphone about 2 inches (5 cm) from your mouth, speak in a normal voice.
away 2inches
3. Release the button when you’re finished talking and listen for a response. You cannot receive incoming calls while pressing the TALK button.
“Roger Beep” Confirmation Tone
Your listener will hear an audible tone when you release the TALK button. This alerts the other party that you are finished talking and it is OK for them to speak.
When you are finished talking:
1.Release the TALK button to receive incoming transmissions. Your microTALK®
is always in listening mode while the TALK or CALL buttons are not pressed.
2.Adjust the volume by pushing the VOLUME UP or VOLUME DOWN button.
VOLUME UP/DOWN button
Illuminating the Display
1. Press and release the LIGHT/MAX RANGE button to illuminate the display for 10 seconds.
LIGHT/MAX RANGE button
Auto Squelch
Your microTALK® radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise due to terrain, or conditions, or if you’ve reached your maximum range limit.
3 |
4 |
O P E R AT I O N |
ENGLISH |
Maximum Range Extender |
microTALK® Range |
You can temporarily turn off Auto Squelch, allowing all signals to be received and extending the maximum range of your radio: 1. Press and hold the LIGHT/MAX RANGE button for 5 seconds. You will hear 2 beeps indicating that Maximum Range Extender is on.
LIGHT/MAX RANGE button
2. To turn Maximum Range Extender off, press and hold the LIGHT/MAX RANGE button for
1 second, or change channels.
Your microTALK® radio has a range of up to 2 miles (3 km). Your range will vary depending on terrain and conditions.
In flat, open country your radio will operate at maximum range.
Buildings and foliage in the path of the signal can reduce the range.
Dense foliage and hilly terrain will further reduce the signal.
Remember, you can achieve maximum
range by using Maximum Range Extender. See above for details.
LIMITED 2-YEAR WARRANTY•CUSTOMER ASSISTANCE
FOR PRODUCTS PURCHASED IN U.S.A. |
|
This warranty gives you specific legal rights, and you may also |
|||
Cobra Electronics Corporation warrants that its Cobra® FRS |
have other rights which vary from state to state. |
||||
Radios, and the component parts thereof, will be free of |
Exclusions: This limited warranty does not apply 1) to any product |
||||
defects in workmanship and materials for period of two |
damaged by accident; 2) in the event of misuse or abuse of the |
||||
(2) years from the date of first consumer purchase. This |
product or as a result of unauthorized alterations or repairs; |
||||
warranty may be enforced by the first consumer purchaser, |
3) if the serial number has been altered, defaced or removed; |
||||
provided that the product is utilized within the U.S.A. |
|
4) if the owner of the product resides outside the U.S.A. |
|||
Cobra® will, without charge, repair or replace, at its option, |
All implied warranties, including warranties of merchantability |
||||
defective FRS radios, products or component parts upon delivery |
and fitness for a particular purpose are limited in duration to |
||||
to the Cobra® Factory Service Department, accompanied by proof |
the length of this warranty. Cobra® shall not be liable for any |
||||
of the date of first consumer purchase, such as a duplicated copy |
incidental, consequential or other damages; including, without |
||||
of a sales receipt. |
|
limitation, damages resulting from loss of use or cost of |
|||
You must pay any initial shipping charges required to ship |
installation. |
||||
Some states do not allow limitations on how long an implied |
|||||
the product for warranty service, but the return charges will |
|||||
be at Cobra's expense, if the product is repaired or replaced |
warranty lasts and/or do not allow the exclusion or limitation |
||||
under warranty. |
|
of incidental or consequential damages, so the above limitations |
|||
|
|
|
|
may not apply to you. |
|
|
|
|
|||
Customer Assistance |
|
1. For Warranty Repair include some form of proof-of- |
|||
After reading this owner’s manual, if you have any questions |
purchase, such as a mechanical reproduction or carbon |
||||
about installing or operating your microTALK® radio, or if you |
of a sales receipt. If you send the original receipt it |
||||
are missing any parts, please contact Cobra® first. Do not |
cannot be returned. |
||||
return this product to the store. Cobra® Electronics offers the |
2. Send the entire product. |
||||
following customer support services. |
|
3. Enclose a description of what is happening with the unit. |
|||
• Automated Help Desk is available 24 hours |
Include a typed or clearly printed name and address of |
||||
a day, 7 days a week at 773-889-3087. |
where the unit is to be returned. |
||||
• Customer Service Operators are available at |
4. Pack unit securely to prevent damage in transit. |
||||
the same number 8:00 a.m. to 6:00 p.m. CST |
If possible, use the original packing material. |
||||
Monday through Friday (except holidays). |
5. Ship prepaid and insured by way of a traceable carrier such |
||||
• Questions can be faxed to 773-622-2269. |
as United Parcel Service (UPS) or First Class Mail to avoid |
||||
• Technical assistance is available on-line in the |
loss in transit to: Cobra Factory Service, Cobra Electronics |
||||
Frequently Asked Questions (FAQ) section at |
Corporation, 6500 W. Cortland St., Chicago, IL 60707. |
||||
www.cobra.com or by e-mail to |
|
6. If the unit is in warranty, upon receipt of your unit it will |
|||
productinfo@cobra.com. |
|
either be repaired or exchanged depending on the model. |
|||
If your product should require factory service please |
Please allow approximately 3-4 weeks before contacting |
||||
us for status. If the unit is out of warranty a letter will |
|||||
call Cobra |
® |
first before sending your unit in. This will |
|||
|
automatically be sent informing you of the repair charge |
||||
ensure the fastest turn-around time on your repair. |
|||||
or replacement charge. If you have any questions, please |
|||||
|
|
® |
factory. |
||
You may be asked to send your unit to the Cobra |
|
It will be necessary to furnish the following in order to |
call 773-889-3087 for assistance. |
|
|
have the product serviced and returned. |
|
5 |
6 |