Data Sheet
Cisco Industrial Ethernet 2000 Series Switches
Product Overview
The Cisco® Industrial Ethernet 2000 (IE 2000) Series is a range of compact, ruggedized access switches that handle security, voice, and video traffic across industrial networks. They provide customers in industries such as automotive, oil and gas, mining, transportation, and energy with highly secure access and industry-leading convergence using Cisco Resilient Ethernet Protocol (REP).
Product Details
The Cisco IE 2000 Series are designed for low cost, low ports, and small sizes. They offer:
●Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor Pluggable [SFP] downlinks on selected models); fixed configurations with a compact form factor
●Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45 uplink
●Dual-input DC power supply, alarm relays, DIN rail mount
●Industrial Power over Ethernet (PoE) solution
●Conformal coating available
●Swappable SD flash card and mini-USB connector
●Industrial environmental compliance and certifications
●Industrial partner applications: Ethernet/IP and PROFINET
Primary Benefits and Features
●Easy deployment: Zero-touch discovery using Dynamic Host Control Protocol (DHCP), express setup, and fast bootup time (60 seconds) to help in migrating to an Ethernet environment without resistance.
●Security: 802.1x, port security, and DHCP allow dynamic port-based authentication; Secure Shell (SSHv2); SNMPv3 provides encrypted administrator traffic during Telnet and SNMP sessions; TACACS+ and RADIUS authentication facilitate centralized control and restrict unauthorized users.
●Resiliency: Cisco REP ring protocol and PROFINET– Media Redundancy Protocol (MRP)
●Manageability: Auto SmartPort, Web Device Manager, Telnet, HTTPS access, SNMP, CNA, and Cisco Prime Infrastructure.
●Network Address Translation (NAT): Line-rate, hardware-enabled 1:1 static address translation designed to enable duplicate IP address usage in the Layer 2 machine node networks.
●Layer 3 routing: IPv4 and IPv6.
●Industrial PoE: PoE (IEEE 802.af) and PoE+ (802.3at) supported on selected models.
●Industrial automation protocols: EtherNet/IP (CIP) and PROFINET MRP (IEC 62439-2) allow integration with existing management platforms from Rockwell, Siemens, and others.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. |
Page 1 of 12 |
Product Specifications
Switch Performance and Scalability
●Maximum Forwarding Bandwidth 3.8Gbps
●Maximum Switching Bandwidth 7.6Gbps
●Maximum Forwarding rate: 5.66Mpps with 64-byte packets (Line-rate at all packet sizes)
●Egress buffer: 2 MB
●Unicast MAC addresses: 8000
●Internet Group Management Protocol (IGMP) multicast groups: 255
●Maximum virtual LANs (VLANs): 1005
●IPv4 MAC security ACEs: 384 (default ternary content-addressable memory [TCAM] template)
●Bidirectional, 128 NAT translation entries
●IPv4 routing: 3500 routes, IPv6 routing: 1750 routes
Detailed Product Information
Figure 1 shows switch models, and Table 1 shows the Cisco IE 2000 Series configuration information. Table 2 lists the SKUs for power supplies and license upgrades. Table 3 includes IE 2000 Series product specifications. Table 4 lists software features. Table 5 includes compliance specifications. Table 6 outlines management and relevant industry standards.
Figure 1. Industrial Ethernet 2000 Series
Table 1. |
Industrial Ethernet 2000 Series Configurations |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
Product Number |
Total |
RJ45 Ports |
Combo |
SFP Ports |
Manufacturing |
Type of |
IEEE 1588 |
L2NAT |
PoE/ |
Conformal |
|
|
Ports |
|
|
Ports |
|
License |
possible |
|
|
PoE(+) |
Coating |
|
|
|
|
|
|
|
Upgrade |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-4TS-L |
6 |
4 |
FE |
|
2 FE |
LAN Lite |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-4TS-B |
6 |
4 FE |
|
2 FE |
LAN Base |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-4T-L |
6 |
6 |
FE |
|
|
LAN Lite |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-4T-B |
6 |
6 FE |
|
|
LAN Base |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-4TS-G-L |
6 |
4 |
FE |
|
2 GE |
LAN Lite |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-4TS-G-B |
6 |
4 FE |
|
2 GE |
LAN Base |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-4T-G-L |
6 |
4 |
FE, 2 GE |
|
|
LAN Lite |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-4T-G-B |
6 |
4 FE, 2 GE |
|
|
LAN Base |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. |
Page 2 of 12 |
Product Number |
Total |
RJ45 Ports |
Combo |
SFP Ports |
Manufacturing |
Type of |
IEEE 1588 |
L2NAT |
PoE/ |
Conformal |
|
|
Ports |
|
Ports |
|
License |
possible |
|
|
PoE(+) |
Coating |
|
|
|
|
|
|
|
Upgrade |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-4S-TS-G-L |
6 |
|
|
4 FE, 2 GE |
LAN Lite |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-4S-TS-G-B |
6 |
|
|
4 FE, 2 GE |
LAN Base |
1, 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-8TC-L |
10 |
8 FE |
2 FE |
|
LAN Lite |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-8TC-B |
10 |
8 FE |
2 FE |
|
LAN Base |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-8TC-G-L |
10 |
8 FE |
2 GE |
|
LAN Lite |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-8TC-G-B |
10 |
8 FE |
2 GE |
|
LAN Base |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-8TC-G-E |
10 |
8 FE |
2 GE |
|
LAN Base |
1, 2, 4 |
Yes |
U* |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-16TC-L |
20 |
16 FE |
2 FE |
2 FE |
LAN Lite |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-16TC-B |
20 |
16 FE |
2 FE |
2 FE |
LAN Base |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-16TC-G-L |
20 |
16 FE |
2 GE |
2 FE |
LAN Lite |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-16TC-G-E |
20 |
16 FE |
2 GE |
2 FE |
LAN Base |
1, 2, 4 |
Yes |
U* |
|
|
|
IE-2000-16TC-G-X |
20 |
16 FE |
2 GE |
2 FE |
LAN Base |
1, 2, 4 |
Yes |
U* |
|
Yes |
|
IE-2000-8TC-G-N |
10 |
8 FE |
2 GE |
|
Enhanced LAN |
1, 2 |
Yes |
Yes |
|
|
|
|
|
|
|
|
Base |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-16TC-G-N |
20 |
16 FE |
2 GE |
2FE |
Enhanced LAN |
1, 2 |
Yes |
Yes |
|
|
|
|
|
|
|
|
Base |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-16PTC-G-L |
18 |
16 FE |
2 GE |
|
LAN Lite |
3 |
|
|
Yes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-16PTC-G-E |
18 |
16 FE |
2 GE |
|
LAN Base |
1, 2 |
Yes |
U |
Yes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IE-2000-16PTC-G- |
18 |
16 FE |
2 GE |
|
Enhanced LAN |
1, 2 |
Yes |
Yes |
Yes |
Yes |
|
NX |
|
|
|
|
Base |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“Type of possible Upgrade” Legend:
1:LAN Base to IP Lite Cisco IOS Software Upgrade
2:Enhanced LAN Base to IP Lite Cisco IOS Software Upgrade
3:LAN Lite to LAN Base Cisco IOS Software Upgrade
4:LAN Base to Enhanced LAN Base Cisco IOS Software Upgrade and License Upgrade U: Upgradable to L2NAT via Enhanced Lan Base or IP Lite license
Table 2. |
Accessories and License Upgrade PIDs |
|
|
|
|
Product Number |
Description |
|
|
|
|
SD-IE-1GB= |
|
1 GB Ruggedized SD memory card (must be ordered, not included by default) |
|
|
|
STK-RACK-DINRAIL= |
19 in. DIN Rail mount kit |
|
|
|
|
IE-LICENSE-SPARE |
Spare license for software upgrade (L2 to L3 features, MRP ring, etc) |
|
|
|
|
L-IE2000-L-B= |
IE2000 LAN Lite to LAN Base e-license |
|
|
|
|
L-IE2000-B-E= |
IE2000 LAN Base to Enhanced LAN Base e-license |
|
|
|
|
LIC-IE2000-IP-L= |
IE2000 LAN Base or Enhanced LAN Base to IPLite e-license |
|
|
|
|
LIC-IE2000-L-IP= |
IE2000 LAN Lite to IPLite e-license |
|
|
|
|
LIC-MRP-MANAGER= |
MRP Ring Manager license |
|
|
|
|
LIC-MRP-Client= |
MRP Ring Client license |
|
|
|
|
Wallmount-IE2k-04= |
Wall mount kit accessory for IE2000 4-ports downlink PID |
|
|
|
|
Wallmount-IE2k-08= |
Wall mount kit accessory for IE2000 8-ports downlink PID |
|
|
|
|
Wallmount-IE2k-16= |
Wall mount kit accessory for IE2000 16-ports downlink PID |
|
|
|
|
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. |
Page 3 of 12 |
Table 3. |
Product Specifications |
|
|
|
|
Description |
|
Specification |
|
|
|
Hardware |
|
● 256 MB DRAM with ECC memory |
|
|
● IEEE 1588v2 FPGA |
|
|
● 64 MB on-board flash memory |
|
|
● 1GB removable SD flash memory card (optional) |
|
|
● Mini-USB connector |
|
|
|
Alarm |
|
● Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay |
|
|
|
Power Consumption |
● 4-port downlink models: 9.5-15 W |
|
|
|
● 8-port downlink models: 12.5-20 W |
|
|
● 16-port downlink models: 21-30 W |
|
|
● 4-port PoE/PoE+ models: 21-30 W (16-port base switch) and 4 PoE/PoE+ power requirement |
|
|
|
Connectors and |
● 100BASE-FX MMF (2 km), -LX SMF (10 km) -ZX SMF (100 km), BX10 SMF (10 km) SFP and CWDM SFPbased |
|
Cabling |
|
ports: LC fiber connectors |
|
|
● 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
|
|
|
Dimensions |
|
● IE-2000 6 ports (copper downlinks) chassis: 5.1”H x 2.95”W x 4.51”D in (130mm H x 74.9mm W x 115mm D) |
(H x W x D) |
|
● IE-2000 6 ports (SFP downlinks) chassis: 5.1“H x 3.15”W x 4.51”D in (130mm H x 80mm W x 115mm D) |
|
|
|
Including DIN Rail |
● IE-2000 10 ports short chassis: 5.1"H x 3.6"W x 4.51"D (130mm H x 91.4mm W x 115mm D) |
|
|
|
|
|
|
● IE-2000 10 ports long chassis: 5.1"H x 3.6"W x 5.26"D (130mm H x 91.4mm W x 134mm D) |
|
|
● IE-2000 18-20 ports chassis: 5.1"H x 5.0"W x 5.26"D (130mm H x 127mm W x 134mm D) |
|
|
● PWR-IE50W-AC=: 5.8"H x 2.0"W x 4.4"D (147mm H x 51 mm W x 112mm D) |
|
|
● PWR-65W-PC-AC=: 5.9 "H x 2.6"W x 4.6"D (150mm H x 66mm W x 117mm D) |
|
|
● PWR-65W-PC-DC=: 5.9 "H x 2.6"W x 4.6"D (150mm H x 66mm W x 117mm D) |
|
|
● PWR-IE170W-PC-AC=: 5.93 x 3.72 x 5.60 in. (150.6 x 94.5 x 142.2mm) |
|
|
● PWR-IE170W-PC-DC=: 5.93 x 4.47 x 5.75 in. (150.6 x 113.5 x 145.8mm) |
|
|
|
Weight |
|
● IE-2000 6 ports chassis: 2.45 lbs (1.11 kg) |
|
|
● IE-2000 6 ports (SFP): 2.69 lbs (1.22 kg) |
|
|
● IE-2000 10 ports short chassis: 2.75 lbs (1.25 kg) |
|
|
● IE-2000 10 ports long chassis: 3.45 lbs (1.56 kg) |
|
|
● IE-2000 18-20 ports chassis: 4.35 lbs (1.97 kg) |
|
|
● PWR-IE50W-AC=: 1.4 lb (0.65 kg) |
|
|
● PWR-IE50W-AC-IEC=: 1.4 lb (0.65 kg) |
|
|
● PWR-IE65W-PC-DC=: 2.6 (1.18 Kg) |
|
|
● PWR-IE65W-PC-AC=: 2.7 (1.24 Kg) |
|
|
● PWR-IE170W-PC-AC=: 3.88 pounds (1.76 kg) |
|
|
● PWR-IE170W-PC-DC=: 3.7 pounds (1.67 kg) |
|
|
|
|
Table 4. |
IE 2000 Series Power Supplies |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
Product Number |
Wattage |
Rated Nominal Input |
Supported Input |
Power Output |
PoE/PoE+ |
Use Case Scenario |
|
||
|
|
|
|
Operating Range |
Voltage |
|
Support |
|
|
|
|
|
|
|
|
Operating Range |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
PWR-IE170W- PC-AC= |
170W |
AC 100-240V/2.3A 50-60Hz |
AC 90-264V |
54VDC/3.15A |
Yes |
Maximum PoE/PoE+ |
|
||
|
|
|
|
or |
or |
|
|
port support in a AC |
|
|
|
|
|
|
|
|
or high DC |
|
|
||
|
|
|
|
DC 125-250V/2.1A |
DC 106-300V |
|
|
1 |
|
|
|
|
|
|
|
|
environment |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
PWR-IE170W- PC-DC= |
170W |
DC 12-54V/23A |
DC 10.8-60V |
54VDC/3.15A |
Yes |
Maximum PoE/PoE+ |
|
||
|
|
|
|
|
|
|
|
port support in a DC |
|
|
|
|
|
|
|
|
|
|
environment1 |
|
|
|
PWR-IE50W- AC= |
50W |
AC 100-240V/1.25A 50-60Hz |
AC 90-264V |
24VDC/2.1A |
No |
Provides power to |
|
||
|
|
|
|
or |
or |
|
|
main system, not used |
|
|
|
|
|
|
|
|
for PoE in an AC or |
|
|||
|
|
|
|
DC 125-250V/1.25A |
DC 106-300V |
|
|
|
||
|
|
|
|
|
|
high DC environment |
|
|||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
PWR-IE50W- AC-IEC= |
50W |
AC 100-240V/1.25A 50-60Hz |
AC 90-264V |
24VDC/2.1A |
No |
Provides power to |
|
||
|
|
|
|
|
|
|
|
main system, not used |
|
|
|
|
|
|
|
|
|
|
for PoE in DC |
|
|
|
|
|
|
|
|
|
|
environment |
|
|
|
|
|
|
|
|
|
|
|
|
|
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. |
|
|
|
Page 4 of 12 |