|
|
Start Here |
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy Setup Instructions |
|
|
Photo Printer |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Unpack the Printer |
2 Prepare the Printer |
3 Install the FINE Cartridges |
|
|
|
|
1 Carefully remove all items from the box.
1Open the Paper Support and the Front Cover, then remove the Protective Material on the right side.
1 Open the Front Cover. The FINE Cartridge Holder automatical- |
6 Push up the FINE Cartridge until it clicks into place. |
ly moves to the left. |
|
IMPORTANT: For correct printer operation, make sure the FINE
Cartridge is secure in slots.
Protective Material
PIXMA iP1700 Photo Printer
2 Plug the Power Cord into the back of the printer and connect the other end to a power outlet.
Power Cord |
Power Cord |
|
FINE Cartridges |
PG-40 |
CL-41 |
NOTE: Do NOT connect the USB cable at this stage.
3 TURN THE PRINTER ON. The printer will initialize. Wait until the POWER lamp remains fully lit.
Documentation and Software Kit
Serial Number
2Write down the serial number. You will need this to register the product.
3Remove the Color FINE Cartridge (CL-41) from its box.
4 Remove the Protective Tape gently.
Electrical Contacts
To the FINE Cartridge Holder
Protective Tape
Print Head Nozzles
NOTE:
·Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The printer may not print out properly if you touch it.
·Do not reattach the Protective Tape once you have removed it.
·Handle the removed Protective Tape carefully to avoid getting your hands dirty or staining surrounding work area.
5Insert the Color FINE Cartridge slightly slanted into the right slot (C).
7Repeat the procedure for the Black FINE Cartridge (PG-40), inserting it into the left slot (B).
8 Close the Front Cover.
NOTE: The printer will perform a Print Head Cleaning after the cover is closed. Wait until the process is complete before proceeding.
IMPORTANT: Wait until the preparatory operation is complete; this takes about one to two minutes.
Continue with Step 4
on side two.
Loading...