Candy CST 360L Manual

0 (0)

Thank-you for choosing a Candy washing machine. We are confident it will loyally assist you in safely washing your clothes, even delicates, day after day.

You can register your product at www.registercandy.com to gain faster access to supplementary services solely reserved to our most loyal customers.

Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance.

Only use the washing machine after carefully reading these instructions. We recommend you always keep this manual on hand and in good condition for any future owners.

Please check that the appliance is delivered with this instruction manual, warranty certificate, service centre address and energy efficiency label. Also check that plugs, drain hose support hook and liquid detergent or bleach tray (only on some models) are included. We recommend you keep all these components.

Environmental conditions

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).

WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules:

!WEEE should not be treated as household waste;

!WEEE should be handed over to the relevant collection points managed by the municipality or by registered companies. In many countries, for large WEEE, home collection could be present.

In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment.

Each product is identified by a unique 16character code, also called the “serial number”, printed on the sticker. This can be found inside the door opening. This code is a unique code for your product that you will need to register the product warranty, or if you need to contact the Customer Service Centre.

Contents

1.GENERAL SAFETY RULES

2.INSTALLATION

3.PRACTICAL TIPS

4.MAINTENANCE AND CLEANING

5.QUICK USER GUIDE

6.CONTROLS AND PROGRAMS

7.THROUBLESHOOTING AND WARRANTY

1.GENERAL SAFETY RULES

!This appliances is intended to be used in household and similar applications such as:

-Staff kitchen areas in shops, offices and other working environments;

-Farm houses;

-By clients in hotels, motels and other residential type environments;

-Bed and breakfast type environments.

A different use of this appliance

from	household	environment
or	from typical	housekeeping

functions, as commercial use by expert or trained users, is excluded even in the above applications. If the appliance is used in a manner inconsistent with this it may reduce the life of the appliance and may void the manufacturer’s warranty.

Any damage to the appliance or other damage or loss arising through use that is not consistent with domestic or household use

(even if located in a domestic or household environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.

!This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

!Children should be supervised to ensure that they do not play with the appliance.

!Children of less than 3 years should be kept away unless continuously supervised.

!If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

!Only use the hose-sets supplied with the appliance for the water supply connection (do not reuse old hose-sets).

!Water pressure must be between 0,05 MPa and 0,8 MPa.

!Make sure that a carpet do not obstruct the base of the machine and ventilation openings.

!The OFF condition is reached by placing the reference mark on the programmes control/knob in the vertical position. Any other different position of such control sets the machine in ON condition (only for models with programmes knob).

!After installation, the appliance must be positioned so that the plug is accessible.

!The maximum load capacity of dry clothes depends on the model used (see control panel).

!To consult the product fiche please refer to the manufacturer website.

Safety instructions

!Before cleaning or maintaining the washing machine, unplug the appliance and turn off the water faucet.

!Make sure the electrical system is grounded. Otherwise, seek qualified professional assistance.

!Please do not use converters, multiple sockets or extension cords.

!In the event of fault and/or malfunction, turn off the washing machine, close the water faucet and do not tamper with the appliance.

Immediately contact the Customer Service Centre and only use original spare parts.

Failure to observe these instruction may jeopardise appliance safety.

WARNING:

water may reach very high temperatures during the wash cycle.

!Do not pull on the power cord or appliance to unplug the machine.

!Do not expose the washing machine to rain, direct sunlight or other weather elements.

By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.

2. INSTALLATION

1	3
	B
B	A
	B

!Remove the 2 or 4 transportation screws (A) on the back and remove the 2 or 4 flat washers, rubber bungs and plastic spacer tubes (B) as illustrated in figure 1.

max 100 cm

!Fit the trims provided "C" (fig. 2).

	min 4 cm
+2,6 mt
max	min 50 cm
	max 85 cm

!The washing machine should be connected to the water mains via the new tube supplied with the appliance (inside the drum). Do not use the old tube for this purpose.

!Connect one end of the water inlet pipe with the elbow bend to the electrovalve (top rear part of the machine) and the other end to a tap or a plumbed-in 3/4" gas threaded connection.

!Place the washing machine close to the wall, ensuring that there are no bends or kinks anywhere in the tube.

Hook the outlet pipe to the edge of the sink or preferably to a fixed drainage outlet of a diameter greater

than that of the outlet pipe and at a height of min. 50 cm. and a maximum of 75 cm. from the floor (fig. 4).

!If necessary, use the curved accessory to attach and support the outlet pipe more securely.

If your model offers this function:

!To move the washing machine easily, turn the trolley lever to the right. Once you have finished moving the machine, return the lever to its original position.

!Level the machine by adjusting the front feet (fig. 5).

a)Turn the nut clockwise to release the screw on the foot.

b)Raise or lower the foot by rotating it until it stands firmly on the floor.

c)Lock the foot in position by turning the nut anticlockwise until it comes up against the bottom of the washing machine.

!Check that the appliance is properly levelled.

!Check that the washing machine does not rock by trying to move two diagonally opposite top corners at the same time.

!If you move the washing machine from one place to another, you must level the feet again afterwards.

Hydraulic connections

!Connect the water hose to the water supply tap (fig. 6) only using the hose supplied with the appliance (do not reuse old hose-sets).

!Some models may include one or more of the following features:

!HOT&COLD (fig. 7):

water mains connection settings with hot and cold water for higher energy savings.

Connect the grey tube to the cold water faucet and the red one to the hot water faucet. The machine can be connected to the cold water faucet only: in this case, some programs may start a few minutes later.

!AQUASTOP (fig. 8):

a device located on the supply tube that stops water flow if the tube deteriorates; in this case, a red mark will appear in the window “A” and the tube must be replaced. To unscrew the nut, press the one-way lock device "B".

!AQUAPROTECT – SUPPLY TUBE WITH GUARD (fig. 9):

Should water leak from the primary internal tube "C", the transparent containment sheath "D" will contain water to permit the washing cycle to complete. At the end of the cycle, contact the Customer Service Centre to replace the supply tube.

B	D

3. PRACTICAL TIPS

Load tips

WARNING: when sorting laundry, make sure:

-have eliminated metallic objects such as hair clips, pins, coins, from laundry;

-to have buttoned pillow cases, closed zips, tied loose belts and long robe ribbons;

-to have removed rollers, hooks or clips from curtains;

-to have carefully read clothing washing labels;

-to have removed any persistent stains using specific detergents.

!When washing rugs, bedcovers or other heavy clothing, we recommend you avoid the spinning cycle.

!To wash wool, make sure the item can be machine washed and marked by the “Pure virgin wool” symbol with the “Does not mat” or “Machine washable” label.

Helpful suggestions for the user

A guide environmentally friendly and economic use of your appliance.

Maximise The Load Size

!Achieve the best use of energy, water, detergent and time by using the recommended maximum load size.

Save up to 50% energy by washing a full load instead of 2 half loads.

Do you need to pre-wash?

!For heavily soiled laundry only!

SAVE detergent, time, water and between 5 to 15% energy consumption by NOT selecting Prewash for slight to normally soiled laundry.

Is a hot wash required?

!Pretreat stains with stain remover or soak dried in stains in water before washing to reduce the necessity of a hot wash programme.

Save up to 50% energy by using a 60°C wash programme.

Following is a quick guide with tips and recommendations on detergent use at the various temperatures. In any case, always read the instructions on the detergent for correct use and doses.

When washing heavily soiled whites, we recommend using cotton programs of 60°C or above and a normal washing powder (heavy duty) that contains bleaching agents that at medium/high temperatures provide excellent results.

For washes between 40°C and 60°C the type of detergent used needs to be appropriate for the type of fabric and level of soiling.

Normal powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling.

For washing at temperatures below 40°C we recommend the use of liquid detergents or detergents specifically labeled as suitable for low temperature washing.

For washing wool or silk, only use detergents specifically formulated for these fabrics.

4.MAINTENANCE AND CLEANING

To clean the washing machine exterior, use a damp cloth, avoiding abrasives, alcohol and/or solvents. The washing machine does not require any special care for ordinary cleaning: clean drawer compartments and the filter; some tips on how to move the machine or on long periods of disuse are provided below.

Filter cleaning

!The washing machine comes with a special filter able to trap large residue, such as buttons or coins, which could clog the drain.

!Only available on certain models: pull out the corrugated hose, remove the stopper and drain the water into a container.

!Before unscrewing the filter, we recommend you place an absorbent cloth under it to keep the floor dry.

!Turn the filter counter-clockwise to the limit stop in the vertical position.

!Remove and clean the filter; when finished, replace it turning it clockwise.

!Repeat the previous steps in reverse order to reassemble all parts.

!Unplug the washing machine.

!Detach the tube from the strap and lower it, fully draining water into a bowl.

!Secure the drain tube with the strap when finished.

Cleaning the detergent dispenser and its compartments

!Press button (A).
!Hold down the button and turn the
detergent dispenser outwards.
!Remove the dispenser and clean it.
!It is recommended to remove any
remamining	detergent	in	the
compartments to avoid any build up that
could cause blockages and restrict the				EN
water flow from	the dispenser to drum.
!Pulling out and extract the trap/traps (S)
!Pulling out and extract the trap/traps (S)
that are located in the back part of the
dispenser and clean them carefully.
!Remove any solid residue which could
block the holes in the compartments.
A	S

Suggestions for moves	or
prolonged disuse	Fitting

!Should the washing machine be stored in an unheated room for a long period of time, drain all water from tubes.

Fit in the tabs as shown (B).

Turn the detergent dispenser towards the housing

5. QUICK USER GUIDE

This washing machine automatically adjusts the level of the water to the type and quantity of washing. This system gives a reduction in energy consumption and a saving in washing times.

Program selection

6.CONTROLS AND PROGRAMS

!Turn on the washing machine and select the required program.

!Adjust the washing temperature if necessary and press the required "option" buttons.

!Press the START/PAUSE button to start washing.

Should power go out when the washing machine is running, a special memory saves the settings and, when power returns, the machine resumes the cycle from where it left off.

!At the end of the programme, the message "End" will appear on the display or, on some models, all wash stage indicator lights will turn on.

Wait until the DOOR LOCKED light has gone out before opening the door.

!Turn off the washing machine.

For any type of wash, see the program table and follow the operating sequence as indicated.

Technical data

Water pressure:

min 0.05 Mpa / max 0.8 Mpa

(0.05 MPa dispenses approximately 1 litre of water in 10 seconds)

Spin r.p.m.: See rating plate.

Power input / Power current fuse amp / Supply voltage: See rating plate.

G H I L M

C D E F B

AProgramme selector with OFF position

BSTART/PAUSE button

CDELAY START button

DEXTRA RINSE button

ETEMPERATURE SELECTION button

FSPIN SPEED button

GDELAY START TIME / WASH STAGE indicator lights

HDOOR LOCKED indicator light

IEXTRA RINSE indicator light

L TEMPERATURE SELECTION indicator lights

MSPIN SPEED indicator lights

NSMART TOUCH area

Opening the door

A special safety device prevents the door from being opened immediately after the end of the cycle.

Wait for 2 minutes after the wash cycle has finished and the "Door Security" light has gone out before opening the door.

PROGRAMME selector with OFF position

When you select a programme the indicator lights related to temperature and spin of that cycle will light up.

N.B.: To switch the machine off, turn the programme selector to the OFF position.

!Press the START/PAUSE button to start the selected cycle.

!Once a programme is selected the programme selector remains stationary on the selected programme till cycle ends.

!Switch off the washing machine by turning the selector to OFF.

When the START/PAUSE button has been pressed, the appliance can take few seconds before it starts working.

ADD OR REMOVE ITEMS AFTER THE PROGRAMMES HAS STARTED (PAUSE)

!Press and hold the START/PAUSE button for about 2 seconds (some indicator lights will flash, showing that the machine has been paused).

!Wait 2 minutes until the safety device unlocks the door.

Before you open the door, please check water level is below the door opening to avoid flooding.

!After you have added or removed items,		EN
close the door and	press the
START/PAUSE button (the	programme

will start from where it left off).

CANCELLING THE PROGRAMME

!To cancel the programme, set the selector to the OFF position.

DELAY START button

The programme selector must be returned to the OFF position at the end of each cycle or when starting a subsequent wash cycle prior to the next programme being selected and started.

START/PAUSE button

Close the door BEFORE selecting the button START/PAUSE.

!Press to start the selected cycle (according to the selected cycle one of the wash stage indicator lights will illuminate).

!Appliance start time can be set with this button, delaying the start by 3, 6 or 9 hours.

!Proceed as follows to set a delayed start:

-Select a programme.

-Wait until the indicator lights related to temperature and spin of the programme selected light up.

-Press the delay start button (each time the button is pressed the start will be delayed by 3, 6 or 9 hours respectively and the corresponding time indicator light will blink).

-Press START/PAUSE button to commence the delay start operation (the indicator light associated with the selected delay start time stops blinking and remains on). At the end of the required time delay the programme will start.

!It is possible to cancel the delay start by turning the programme selector to OFF.

If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left OFF.

The option buttons should be selected before pressing the START/PAUSE button.

EXTRA RINSE button

!This option allows you to add one rinse at the end of the washing cycle and is useful for people with delicate and sensitive skin, for which a small amount of detergent residue can cause irritations or allergies.

!It is advisable to also use this function for the children clothes and for the washing of heavily soiled items, which requires a lot of detergent to be used, or for the washing of toweling items whose fibres mostly have the tendency to hold the detergent.

If the option is not compatible with the selected programme, the relevant indicator light first flashes and then goes off.

TEMPERATURE SELECTION button

!This button allows you to change the temperature of the wash cycles.

!It is not possible to raise the temperature over the maximum allowed for the programme, in order to protect the fabrics.

!If you want carry out a cold wash all the indicators must be off.

SPIN SPEED button

!By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled.

!If the label does not indicate specific information, it is possible to use the maximum spin expected in the program.

To prevent damage to the fabrics, it is not possible to increase the speed over the maximum allowed for the programme.

!To reactivate the spin cycle press the button until you reach the spin speed you would like to set.

!It is possible to modify the spin speed without pausing the machine.

An over dosing of detergent can cause excessive foaming. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption.

The machine is fitted with a special! electronic device, which prevents the! spin cycle without load or on particularly unbalanced load.! This reduces the noise and vibration in!the machine and so prolongs the life of! your machine.

100

DELAY START TIME / WASH STAGE indicator lights

!Each time the DELAY START button is pressed the indicator lights show how many hours of delay you chosen (3, 6 or 9 hours) and the countdown until the end of it.

!When a programme is running, the indicator lights will light in sequence to indicate the current phase:

main wash

rinse

spin

EXTRA RINSE indicator light

The indicator light will light up when the button is pressed.

If the option is not compatible with the selected programme, the relevant indicator light first flashes and then goes off.

WASH TEMPERATURE indicator lights

This show the washing temperature of the selected programme that can be changed (where allowed) by the relevant button.

If you want carry out a cold wash all the indicators must be off.

DOOR LOCKED indicator light

!The indicator light is illuminated when the door is fully closed.

Close the door BEFORE selecting the START/PAUSE button.

!When START/PAUSE is pressed on the machine with the door closed, the indicator will flash momentarily and then illuminate.

If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically cancelled. In this case, close the door in the proper way and press the START/PAUSE button.

!A special safety device prevents the door from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle has finished and the DOOR LOCKED light has gone out before opening the door. At the end of the cycle turn the programme selector to OFF.

SPIN SPEED indicator lights

This show the spin speed of the selected programme, you can reduce or omit by the relevant button.

101

SMART TOUCH

This appliance is equipped with Smart Touch technology that allows you to interact, via the App, with smartphones based on Android operating system and equipped with NFC (Near Field Communication) function.

!Download on your smartphone the

Candy simply-Fi App.

The Candy simply-Fi App is available for devices running both Android and iOS, both for tablets and for smartphones. However, you can interact with the machine and take advantage of the potential offered by Smart Touch only with Android smartphones equipped with NFC technology, according to following functional scheme:

Android smartphone	Interaction with the
with NFC technology	machine + contents
Android smartphone	Contents only
without NFC technology
Android Tablet	Contents only

Apple iPhone	Contents only

Apple iPad	Contents only

FUNCTIONS

!Smart Care – Smart Check-up and AutoClean cycles and a troubleshooting guide.

!My Statistics – Washing statistics and tips for a more efficient use of your machine.

Get all the details of the Smart Touch functions, browsing the App in DEMO mode or go to: www.candysmarttouch.com

HOW TO USE SMART TOUCH

FIRST TIME - Machine registration

!Enter the "Settings" menu of your Android smartphone and activate the NFC function inside the "Wireless & Networks" menu.

Depending on the smartphone model and its Android OS version, the process of the NFC activation may be different. Refer to the smartphone manual for more details.

!Turn the knob to the Smart Touch position to enable the sensor on the dashboard.

The main functions available using the App are:

!Voice Assistant – A guide to help you choose the ideal cycle with only three voice inputs (clothes/fabrics, color, stain level).

!Cycles – To download and launch new washing programmes.

!Open the App, create the user profile and register the appliance following the instructions on the phone display or the "Quick Guide" attached on the machine.

More information, F.A.Q. and the video for an easy registration are available on: www.candysmarttouch.com/how-to

102

NEXT TIME – Regular usage

!Every time you want to manage the machine through the App, first you have to enable the Smart Touch mode by turning the knob to the Smart Touch indicator.

!Make sure you have unlocked your phone (from stand-by mode) and you have activated the NFC function; then, follow the steps mentioned earlier.

!If you want to start a washing cycle, load the laundry, the detergent and close the door.

!Select the desired function in the App (e.g.: starting a programme, the Smart Check-up cycle,…).update statistics, etc

!Follow the instructions on the phone display, KEEPING IT ON the Smart Touch logo on the machine dashboard, when requested to do so by the App.

NOTES:

Place your smartphone so that the NFC antenna on its back matches the position of the Smart Touch logo on the appliance (as illustred below).

103

If you do not know the position of your NFC antenna, slightly move the smartphone in a circular motion over the Smart Touch logo until the App confirms the connection. In order for the data transfer to be successful, it is essential TO KEEP THE SMARTPHONE ON THE DASHBOARD DURING THESE THE FEW SECONDS OF THE PROCEDURE; a message on the device will inform about the correct outcome of the operation and advise you when it is possible to move the smartphone away.

Thick cases or metallic stickers on your smartphone could affect or prevent the transmission of data between machine and telephone. If necessary, remove them.

The replacement of some components of the smartphone (e.g. back cover, battery, etc...) with non-original ones, could result in the NFC antenna removal, preventing the full use of the App.

The management and the control of the machine via App is only possible "by proximity": it is therefore not possible to perform remote operations (e.g.: from another room; outside of the house).

Table of programmes

									1)
PROGRAMME			kg *				TEMP.°C		DETERGENT
PROGRAMME			(MAX.)				Recommended	Max.	1 o 2
							Recommended	Max.	1 o 2
Whites	5	5,5	6	6,5	7	8	60°	90°	( )
Cottons +	5	5,5	6	6,5	7	8	40°	60°	( )
Prewash	5	5,5	6	6,5	7	8	40°	60°	( )
Prewash
EcoMix 20°	5	5,5	6	6,5	7	8	20°	20°
Cottons**	5	5,5	6	6,5	7	8	40°	60°
Synthetics	3	3	3	3	3	3,5	40°	60°
Daily 59 Min.	2	2	2	2,5	2,5	2,5	60°	60°
Rapid 30 Min.	1,5	1,5	1,5	1,5	1,5	2,5	30°	30°
Rinse	-	-	-	-	-	-	-	-
Drain + Spin	-	-	-	-	-	-	-	-
Delicates	2	2	2	2	2	2,5	40°	40°
Jeans	3	3	3	3	3	3	40°	40°
Baby Care	4	4	4	4	4	4,5	60°	60°
Wool	1	1	1	1	1	1,5	40°	40°
Hand Wash	1	1	1	1	1	1,5	30°	30°

Customizable setting that interacts with the App on your smartphone and to download the cycles (see the dedicated section). The factory sets the default programme Auto-Clean, which will sanitize the machine.

104

Please read these notes:

*Maximum load capacity of dry clothes, according to the model used (see control panel).

** STANDARD COTTON PROGRAMMES

ACCORDING TO (EU) No 1015/2010 and

No 1061/2010.

COTTON PROGRAMME WITH A TEMPERATURE OF 60°C.

COTTON PROGRAMME WITH A TEMPERATURE OF 40°C.

These programmes are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumptions for washing cotton laundry.

These programmes have been developed to be compliant with the temperature on the wash label on the garments and the actual water temperature may slightly differ from the declared temperature of the cycle.

Before closing the cover and start the washing process, please check that the internal drum is perfectly closed. When possible, please align the position indicators with drum to assure the best washing performance.

The spin speed may also be reduced, to match any guidelines suggested on the fabric label, or for very delicate fabrics cancel the spin completely this option is available with a spin speed button. This function can be activated with the button SPIN SELECTION. If the label does not indicate specific information, it is possible to use the maximum spin expected in the program. An over dosing of detergent can cause excessive foaming. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption.

() Only with PREWASH option selected (programmes with PREWASH option available).

1) When a programme is selected,
on the display is shown the	EN
display shows the recommended
wash temperature that can be
reduced (where allowed) by the
relevant button.

!PREWASH: if the dispenser has the specific compartment for pre-wash, pour the detergent in it. Otherwise, pour the detergent in the perforated area present on the drum, following the dosage indications of the detergent producer.

IMPORTANT: do not use the pre-wash mode with start-delay option.

"	"

105

Programmes selection

To clean different types of fabrics and various levels of dirt, the washing machine has specific programs to meet every need of washing (see table of programmes).

Whites

An intensive wash. The final spin at maximum speed gives more efficient removal.

Cotton + Prewash

This programme has been designed to remove the stronger stains from cotton white clothes. The prewash guarantees the tough dirt removal. Add into compartment "1" a quantity of detergent equal to 20% of that used for main wash.

EcoMix 20°

This innovative programme, allows you to wash different fabrics and colours together, such as cottons, synthetics and mixed fabrics at only 20°C and provides an excellent cleaning performance. Consumption on this program is about 40% of a conventional 40°C. cottons wash.

Cottons

This program is suitable to clean normally soiled cotton laundry and it is the most efficient program in terms of combined energy and water consumptions for washing cotton laundry.

Synthetics

The washing and rinsing optimise the speed and rhythm of the drum action and water levels. The gentle spin, ensures a reduced formation of creases in the fabric.

Daily 59 Min.

This specially designed programme maintains the high quality wash performance whilst greatly reducing the wash time. The programme is designed for a reduced load (see table of programmes).

Rapid 30 Min.

A complete washing cycle (wash, rinse and spin). This programme is particularly suited to slightly dirty cottons and mixed fabrics.

With this programme it is recommended to use only 20% of the detergent normally used to avoid waste.

Rinse

This program performs 3 rinses with an intermediate spin (which can be reduced or excluded by using the appropriate button) . It is used for rinsing any type of fabric, for example after a wash carried out by hand.

Drain + Spin

The program completes the drain and a maximum spin. It is possible to delete or reduce the spin with the SPIN SPEED button.

Delicates

This program has reduced periods of drum rotation during the cycle and is particularly suitable or washing delicate fabrics. The wash cycle and rinses are carried out with a high level of water to ensure the best performance.

Jeans

This program has been designed to have the highest quality cleaning of fabrics such as denim: ideal for removing dirt without affecting the elasticity of the fibers.

Baby Care

This program allows you to wash all baby clothes getting a perfect clean and sanitizing effect, setting the temperature at 60°C minimum.

To optimize the result of the sanitizing effect we recommend the use of powder detergent.

Wool

This program performs a wash cycle dedicated to the wool fabrics that can be washed in a washing machine, or the articles to be washed by hand.

Hand Wash

Program for hand wash only clothes, the program ends with 3 rinses and a slow spin.

106

Smart Touch

Customizable setting of the knob that you have to select when you would like to transfer a command from the App to the machine and to download/start a cycle (see the dedicated section and the user manual of the App for more info).

In the Smart Touch option the factory sets as a default the "Auto-Clean" cycle, made

to clean the drum, remove bad smells and extend the life of the washing machine. Make sure there is no load in the drum before starting the "Auto-Clean" cycle, use a proprietary washing machine cleaning agent or powder detergent. Leave the door of the machine open at the end of the cycle to allow the drum to dry.

Recommended every 50 washes.

107

Preparing the wash

Opening/ closing the drum

!Open the washing machine lid.

!Open the drum by pressing the (A) button with one hand while pressing down on the opposite door with the other.

!Place clothes in the drum one item at a time, and without squashing. Do not exceed the load limits recommended in the “programme table”. An overloaded washing machine will not wash properly, and will leave clothing wrinkled.

!To close the drum, place the doors so that the one with the (A) button is below the other and they fit together perfectly.

!The compartment is for fabric conditioners, scenting agents and special additives such as starch, blueing, etc.

!MAX - on the detergent case is underlined the maximum level of detergent to be used. Do not exceed this level.

! When the clothes present stains that need treatment with bleaches liquids products, you can proceed to their preliminary cleaning in the washing machine. For that: Introduce the bleach product in the "compartment 2", and set

the rinse program . Once finished the treatment set the programmer to the OFF position, add the rest of the laundry, and proceed to the normal washing with the wanted program.

1)Maximum Main wash washing powder

2)Maximum Main wash washing liquid

3)Maximum scenting agent

Detergent load

The detergent dispenser is divided into 3 compartments:

!Compartment 1 is for powder detergent.

!Compartment 2 is for liquid detergent.

108

7. THROUBLESHOOTING AND WARRANTY

If you believe the washing machine is not working correctly, consult the quick guide provided below which includes some practical tips on how to fix the most common problems.

FOR SMART TOUCH MODELS

The Candy simply-Fi app has a Smart Check-up function that allows you to confirm the functionality and status of the product at any time. To use the Candy simply-Fi app you will need an Android smartphone with NFC technology. More info can be found on the App.

If the display of the machine is showing an error (by a code or blinking LEDs), you should turn on the App on your Android smartphone, with NFC on. Place your smart phone against the Smart Touch logo on the control panel. You should now be able to read the fault directory to solve the issue.

ERROR CODE FORMAT

!Models with a display: the error is shown by a number preceded by the letter “E” (example: E2 = Error 2).

!Models without display: an error is shown by a sequence of flashes of every LED. The error code is shown by the number of flashes followed by a pause of 5 seconds (example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).

Error shown	Possible causes and practical solutions

E2 (with display)	The machine cannot load water.
2 flashes of the LEDs
	Make sure the water supply tap is open.
(without display)
	Make sure the water supply hose isn’t bent, kinked or trapped.


	Make sure the drain pipe is at the proper height (see installation section).

	Close the water supply tap, unscrew the filler hose from the back of
	the washing machine and make sure the “anti-sand” filter is clean
	and not blocked.
E3 (with display)	The washing machine does not drain water.
3 flashes of the LEDs	Make sure the filter is not clogged.
(without display)	Make sure the drain hose isn’t bent, kinked or trapped.
	Make sure the home drainage system is not blocked and is allowing
	water to flow through without obstruction. Try to drain the water in the sink.
E4 (with display)	There is too much foam and/or water.
4 flashes of the LEDs
	Ensure the correct amount of detergent is being used and the
(without display)	detergent is designed for use in a washing machine.
E7 (with display)	Door problem.
7 flashes of the LEDs	Make sure the door is correctly closed.
(without display)	Make sure the clothes inside the drum are not preventing the door
	from closing fully.
	If the door is locked, turn off and unplug the washing machine from
	the electrical supply socket, wait 2-3 minutes and reopen the door.
Any other code	Turn off and unplug the washing machine, wait a minute. Turn on the
	machine and restart a program. If the error occurs again contact an
	Authorised Customer Service Centre directly.
		109

OTHER ANOMALIES
Problem		Possible causes and practical solutions
Problem		Possible causes and practical solutions

The washing machine		Make sure the product is plugged into a working supply socket.
does not work / start		Make sure power is on.
		Make sure the wall socket is working, testing it with another
		appliance such as a lamp.
		The door may not be correctly closed: open and close it again.
		Check whether the required program was correctly selected and the
		start button pressed.
		Make sure the washing machine is not in pause or time delay mode.
Water leaked on the		This may be due to a leak from the seal between the tap, supply
floor near the		hose and fill valve; in this case, replace it and tighten the hose
washing machine		connections correctly.
washing machine		Make sure the front filter is correctly closed.
		Make sure the front filter is correctly closed.
The washing machine		The machine is fitted with a detection system that protects the load
does not spin		and product from damage if the load is not balanced before spinning.
		This may result in:-
		• The machine attempts to balance the load, increasing the time of
		spin.
		• Reduction of the speed of spin to decrease vibrations and noise.
		• The spin cycle aborting to protect the machine and load.
		If this is experienced remove the load de-tangle it, reload it and
		restart the spin program.
		This could be due to the fact that water has not been completely
		drained: wait a few minutes. If the problem persists, see Error 3
		section.
		Some models include a "no spin" function: make sure it is not
		selected.
		Check which options are selected and their effect on the spin cycle.

		Excessive detergent can impede the spin cycle, ensure the correct
		amount of detergent is being used.
Strong vibrations /		The washing machine may not be fully levelled: if necessary, adjust
noises are heard		the feet as indicated in the specific section.
during the spin cycle		Make sure transport screws, rubber bungs and spacer tubes were
		removed.
		Make sure there are no foreign objects inside the drum (coins,
		hinges,…). buttons, etc

The standard manufacturer warranty covers faults caused by electrical or mechanical faults in the product due to an act or omission of the manufacturer. If a fault is found to be caused by factors outside the product supplied, miss-use or as a result of the instructions on use not being followed, a charge may be applied.

110

The use of ecological detergents without phosphates may cause the following effects:

-cloudier rinse drain water: This effect is tied to the suspended zeolites which do not have negative effects on rinse efficiency.

-white powder (zeolites) on laundry at the end of the wash: this is normal, the powder is not absorbed by fabric and does not change its colour.

To remove the zeolites, select a rinse programme. In the future consider using slightly less detergent.

-foam in the water at last rinse: this does not necessary indicate poor rinsing. Consider using less detergent in future washes.

-abundant foam: This is often due to the anionic surfactants found in the detergents which are hard to eliminate from laundry.

In this case, do not re-rinse to eliminate these effects: it will not help at all.

We suggest conducting a maintenance wash using a proprietary cleaner.

If the problem persists or if you suspect a malfunction, immediately contact an Authorised Customer Service Centre.

It is always recommended to use original spare parts, that are available at our Authorised Customer Service Centres.

Warranty

The product is guaranteed under the terms and conditions stated on the certificate included with the product. The warranty certificate must be duly filled in and stored, so as to be shown to the Authorised Customer Service Centre in case of need. Proof of purchase must be made available at the time of any warranty related repair.

The manufacturer declines all responsibility for any printing errors in the booklet included with this product. Moreover, it also reserves the right to make any changes deemed useful to its products without changing their essential characteristics.

111

Tak fordi du har valgt en Candy-									Det enkelte individ kan spille en vigtig rolle i
vaskemaskine.			Vi er overbeviste om, at den						at sikre, at affald af elektrisk og elektronisk
på loyal vis vil hjælpe dig med at vaske dit tøj									udstyr (WEEE) ikke bliver et miljømæssigt
sikkert, endda det sarte, dag efter dag.									problem; det er altafgørende, at følge nogle
Læs omhyggeligt denne manual for korrekt									grundlæggende regler:

og sikker anvendelse og for hjælpsomme									!affald af elektrisk og elektronisk udstyr
tips om effektiv vedligeholdelse.									(WEEE) må ikke behandles som
									husholdningsaffald.
	Brug kun vaskemaskinen efter du								!affald af elektrisk og elektronisk udstyr
omhyggeligt har læst disse instruktioner. Vi									(WEEE) skal afleveres	til det relevante
anbefaler, at du holder denne manual klar ved									indsamlingssted, som	administreres af
hånden og i god stand til mulige fremtidige ejere.									kommunen eller registrerede firmaer. Der
Tjek	venligst		om		apparatet			leveres	findes i mange lande afhentning ved
									husstanden af store affald af elektrisk og
med	denne	brugermanual, garantibevis,							elektronisk udstyr (WEEE)-produkter.
servicecenteradresse				og	energimærke. Tjek
også at stik, holder til afløbsslange og bakker til									Når du køber et nyt apparat, er det i mange
flydende vaskemiddel eller blegemiddel (kun									lande således, at det gamle apparat kan
visse modeller) er inkluderet. Vi anbefaler, at du									returneres til forhandleren, som skal hente
beholder alle disse komponenter.									det gratis fra gang til gang, så længe
Hvert produkt er identificeret med en unik 16-									apparatet er en lignende type og har de
									samme funktioner, som det leverede apparat.
cifret kode, også kaldet "serienummer", som
står	på	klistermærket				på	bagsiden		Indhold
af apparatet (ved åbningen) eller i
dokumentkuverten				indeni produktet. Denne
kode	er et	slags		specifikt		produkt-ID-kort,			1. GENERELLE SIKKERHEDSREGLER
som du skal bruge for registrere det, og hvis

du kontakter Candy-servicecenter.									2. MONTERING
Miljøbetingelser									3. PRAKTISKE TIPS
									4. VEDLIGEHOLDELSE OG RENGØRING
	Dette		apparat			er	mærket i
									5. KVIKBRUGERGUIDE
	henhold			til	det		europæiske
									6. STYRING OG PROGRAMMER
	direktiv 2012/19/EU om affald af
	elektrisk			og	elektronisk			udstyr	7. KUNDESERVICECENTER OG GARANTI
	(WEEE).

Affald af elektrisk og elektronisk udstyr (WEEE) indeholder både forurenende dele (som kan have negative konsekvenser for miljøet) og grundkomponenter (som kan genanvendes). Det er vigtigt at underlægge affald af elektrisk og elektronisk udstyr (WEEE) specifikke behandlinger for at fjerne og skaffe sig af med alle forureningskilder på den rigtige måde og udvinde og genbruge alle materialer.

1.GENERELLE SIKKERHEDSREGLER

!Hensigten med dette apparat er, at det bruges til husholdningsformål eller lignende såsom:

−Personalekøkkenområder i butikker, kontorer og andre arbejdsmiljøer;

−Stuehuse;

−Af klienter på hoteller, moteller og andre lignende boligmiljø;

−Bed & breakfast-miljøer. Anden brug af dette apparat end i husholdningsmiljø eller til typiske husholdningsformål, som kommerciel brug af eksperter eller trænede brugere, udelukkes, selv ved de ovennævnte anvendelser.

Hvis dette apparat anvendes på en måde, ikke i overensstemmelse med dette, kan det reducere apparatets levetid og annullere producentens garanti. Ethvert ansvar for skade på apparatet eller anden skade eller tab i forbindelse med brug, der ikke er i overensstemmelse med hjemlig eller husholdningsbrug (selv hvis apparatet befinder sig i et hjemmeeller husholdningsmiljø), vil ikke blive accepteret af producenten, i fuld overensstemmelse med gældende lovgivning.

!Dette apparat kan bruges af børn fra 8 år og op, og af personer med reduceret fysiske, sansende eller mentale evner, eller manglende

erfaring og viden, hvis de er under opsyn eller gives instruktioner angående brugen af apparatet på en sikker måde og forstår de medfølgende risici.

Børn må ikke lege med apparatet. Rengøring og vedligeholdelse må ikke udføres af børn uden opsyn.

!Børn bør være under opsyn for at sikre, at de ikke leger med apparatet.

!Børn under 3 år bør holdes væk, medmindre de er under konstant opsyn.

!Hvis ledningen er skadet, skal den udskiftes af producenten, dens servicerepræsentant eller lignende kvalificeret personale, for at undgå fare.

!Brug kun de medfølgende slanger til vandforsyning stilslutningen

(genbrug ikke gamle slanger).

!Vandtrykket skal være mellem

0,05 MPa og 0,8 MPa.

!Vær sikker på, at et tæppe ikke blokerer maskinens bund og ventilationsåbningerne.

!Tilstanden SLUKKET opnås ved at indstille referencemarkøren på programstyringen/knappen i den vertikale position. Enhver anden position af denne styring sætter maskinen i tilstanden TÆNDT (kun for modeller med programvælgere).

!Efter montering skal apparatet placeres således at stikket er tilgængeligt.

!Maks. kapacitet for tørt tøj afhænger af den brugte model

(se kontrolpanel).

!For at se apparatets bilagskort refereres der til producentens hjemmeside.

!I tilfælde af defekt og/eller funktionsfejl, så sluk for vaskemaskinen, luk for vandhanen og pil ikke ved apparatet. Tag omgående kontakt til kundeservicecenteret og brug kun originale reservedele. Undladelse af at følge disse instruktioner kan udgøre risici for apparatets sikkerhed.

Sikkerhedsinstruktioner

!Før rengøring og vedligeholdelse af maskinen, skal stikket tages ud og vandhanen lukkes.

!Vær sikker på, at det elektriske system har jordforbindelse. Hvis ikke, så søg professionel assistance.

!Brug venligst ikke omformere, stikdåser eller forlængerledninger.

ADVARSEL:

vandet kan nå meget høje temperaturer under vask.

!Træk ikke i ledningen eller apparatet for at trække maskinens stik ud.

!Udsæt ikke vaskemaskinen for regn, direkte sollys eller andet vejr.

Apparatet er i overensstemmelse med følgende europæiske direktiver:

!2006/95/EC (LVD);

!2004/108/EC (EMC);

!2009/125/EC (ErP);

!2011/65/EU (RoHS);

og efterfølgende ændringer.

2. MONTERING

!De 4 skruer, "A", løsnes på begge vinkelbeslag og ligeledes de 4 skruer, "B". (figur 1).

!De 4 skruer, "A", anbringes igen og de vedlagte pyntekapsler monteres, "C" (figur 2).

max 100 cm

	min 4 cm
+2,6 mt
max	min 50 cm
	max 85 cm

!Vaskemaskinen bør tilsluttes vandindtagelseshanen med den nye vandledning, som leveres vedlagt apparatet, (indeni tromlen). Brug IKKE den gamle vandledning til dette formål.

!Vandindtagelsesledningen forbindes i den ene ende, den med bøjningen, til elektroventilen, (der sidder øverst bagpå maskinen) og i den aden ende til en vandhane eller vandindtagelsestap, med skruemundstykke på 3/4" gas.

!Vaskemaskinen nærmes væggen, idet der sørges for, at ledningen ikke danner bøjninger eller knuder undervejs, og vandudledningsslangen fastgøres til vaskekummens kant eller såfremt det er muligt forbindes slangen til et fast installeret vandudløb/kloak, der har en større diameter end

vaskemaskinens vandudledningsrør, med en minimumshøjde fra 50 cm og en maksimumhøjde på 75 cm fra gulvet (figur 4).

!Hvis det er nødvendigt, bruges det rundformede stykke tilbehør til at fastholde og støtte vandudledningsrøret.

Såfremt Deres model måtte være forsynet dermed:

!For nemt at kunne flytte vaskemaskinen, drejes understellets styrestang mod højre. Efter denne operation, anbringes styrestangen atter i dens oprindelige position.

!Vaskemaskinen højdereguleres og indstilles vandret ved at drje på dens forreste fødder (figur 5).

a)Møtrikken drejes med urets visere for at deblokere fodens skrue.

b)Der drejes på foden, og den hæves eller sænkes, indtil den berører gulvet med hele dens overflade.

c)Foden blokeres og fastgøres ved at dreje møtrikken imod urets visere, indtil den rører ved vaskemaskinens bund.

!Kontroller venligst, at apparatet er fuldstændigt vandret indstillet.

!For at udføre denne kontrol, forsøges det at bevæge vaskemaskinen uden at flytte den, ved skiftevis at støtte sig til diagonalernes yderpunkter øverst på vaskemaskinen og det kontrolleres, at apparatet ikke vipper.

!Hvis vaskemaskinen flytter sig, skal dens fødder atter højdereguleres, (indstilles vandret).

+ 63 hidden pages