Bosch VG4-221-ECS, VG4-221-ETS0C, VG4-221-ETS0W, VG4-221-PCE Specsheet

0 (0)

Video | AutoDome 200 Series PTZ Camera System

AutoDome 200 Series PTZ Camera System

www.boschsecurity.com

Bosch’s AutoDome modular camera system is a revolutionary new concept in dome cameras. More than just a series of cameras, it’s a dome platform built around a system of intelligent, interchangeable modules that allow you to update camera functionality quickly and cost-effectively. Using common components lets you install a basic camera system today and migrate to a more advanced version tomorrow – without having to replace the entire dome, thus protecting your initial investment.

Interchangeable modules

The entire AutoDome system is based on five interchangeable modules: the CPU, camera, housing, communications, and power supply. Simply swap one of AutoDome’s interchangeable modules and quickly upgrade from analog to IP, color to day/night, or add motion tracking. Never before have you had the ability to adapt a security system to your changing needs this quickly or inexpensively.

By using the same housing components, all installations have a consistent look, and observers have no idea which type of camera (if any) is watching over them. This unique, modular design also gives you the flexibility to move cameras between different

uEconomical, high-speed PTZ dome

uFully interchangeable CPUs, cameras, housings, communications, and mounts

u18x color camera

uOptional hybrid operation provides simultaneous analog (coax) and IP connectivity

uUTP transmission standard on all analog models

housings when special coverage is needed, or as site plan requirements change. For example, an 18x PTZ camera over a specific area could easily be “hotswapped” to a 26x day/night without removing the power.

Migrating from a basic dome to one with advanced features such as AutoTrack II intelligent tracking can be done quickly and easily, without requiring dome removal or rewiring. AutoDome’s Ethernet communications module allows you to add IP functionality while maintaining connectivity to existing analog inputs and outputs.

200 Series highlights

The AutoDome 200 Series is an economical, highspeed dome camera that uses a high-performance, 18x color PTZ camera. The 200 Series supports a variety of standard and optional video and data transmission methods, including Bilinx (over coax and UTP), fiber, and even TCP/IP over Ethernet. Remote control, configuration, and firmware updates can also be performed over these cables, offering you unparalleled control of your cameras.

2 | AutoDome 200 Series PTZ Camera System

The optional IP Communications Module has hybrid functionality to protect your current analog technology investment while providing a clear and stable migration path to fully digital, IP-based solutions. This allows you to move to IP video at your own pace – all at once or one camera at a time. And since all AutoDome modules are completely interchangeable, there is no need to replace expensive components (for example cameras) or labor-intensive components (for example mounts and housings).

Functions

The following are some of the features that make the AutoDome 200 Series the most flexible PTZ dome camera systems in the security industry.

High-performance 18x PTZ color camera

AutoDome 200 Series PTZ color cameras have a 1/4- inch color CCD. With 470 TVL/480 TVL (NTSC/PAL) horizontal resolution and sensitivity down to 0.5 lux, the 200 Series offers exceptional performance at an affordable price. A rugged motor with fewer moving parts mean the 200 Series uses less power and is extremely reliable, making it ideal for high-usage applications.

With super-quick, 360° per-second pan and tilt speeds, the AutoDome 200 Series outperforms other domes in its class. As with all AutoDome Modular PTZ Camera Systems, the 200 Series includes AutoScaling (proportional zoom) and AutoPivot (automatically rotates and flips the camera), so tracking a subject is effortless. The 200 Series supports 64 pre-positions and a single preset tour. The preset tour has the capacity for up to 64 pre-positions with a configurable dwell time between pre-positions.

Supported menu languages include: English, French, German, Spanish, Portuguese, Italian, Dutch, and Polish.

Optional hybrid analog/IP operation

AutoDomes equipped with the optional TCP/IP Communications Module use an advanced H.264 encoder to create DVD-quality streaming video across a local or a wide area network, and can simultaneously stream CVBS video via coaxial cabling to support existing analog equipment. Network video streams are sent over IP networks and can be viewed with the Bosch Divar XF Digital Video Recorder, or on a PC running VIDOS video management software. Alternatively, a Bosch IP video decoder can be used to display the video on an analog CVBS or VGA monitor. For maximum accessibility, the video can be viewed using a web browser.

Tri-streaming video

Bosch’s innovative tri-streaming feature enables AutoDomes equipped with the optional IP Communications Module to generate independent streams simultaneously. This feature allows you to stream high-quality images for live viewing while recording at a reduced frame rate, and at the same time, stream images to a remote PDA device.

Unsurpassed reliability

All housings feature recessed screws and latches for increased tamper resistance.

AutoDome pendant housings (indoor and outdoor) are rated to provide IP 66 protection. In addition, the pendant housings come equipped with a low-impact, high-resolution acrylic bubble for enhanced image clarity

AutoDome in-ceiling housings are rated IK 8 (IEC 62262). These housings feature an impact-

resistant polycarbonate Rugged Bubble to protect your camera from vandalism. The Rugged Bubble can withstand impacts equivalent to a 4.5 kg (10 lb) weight dropped from a height of 3 m (10 ft).

Outdoor EnviroDome housings provide an operating temperature range down to -40°C (-40°F). The optional “XT” extreme temperature kit allows an AutoDome to operate in temperatures down to -60°C (-76°F), ensuring reliable operation in even the harshest environments.

The Pressurized Environmental Housing is rated to provide IP 67 protection for a VG4 Series AutoDome® Modular Camera System from the elements, both natural and manmade. It is the ideal surveillance solution for applications that require frequent washdown, including traffic, transit, bridges, tunnels and coastal installations where salt, moisture, dust, insects and fumes threaten the long-term operation of the camera.

Ease of installation and servicing

Bosch’s innovative software, the Configuration Tool for Imaging Devices (CTFID), allows operators or technicians to control the PTZ, change camera settings and even update firmware from virtually anywhere without need for additional wiring. For the new Ethernet versions, an embedded Web server lets the installer access all the user settings, make camera adjustments, and update firmware via a standard Web browser.

The AutoDome’s innovative design simplifies installation and servicing. AutoDome reduces maintenance costs because you can replace individual modules instead of entire camera assemblies. Simply pop out the old module and slide in the new: it’s almost as easy as changing a light bulb. All tethers have been replaced with hinges, making installation and servicing safer and easier. You can even access the built-in power supply without taking down the dome.

Bosch VG4-221-ECS, VG4-221-ETS0C, VG4-221-ETS0W, VG4-221-PCE Specsheet

3 | AutoDome 200 Series PTZ Camera System

The AutoDome 200 Series has advanced, built-in diagnostics to simplify service and minimize downtime. Using the On Screen Display (OSD), a technician can quickly and easily check critical parameters (such as internal temperature and input voltage level) to verify that the dome is functioning within acceptable operating limits. If video is not present, a local inspection of three diagnostic LEDs at the camera site can identify the presence of video and control data.

Feature Comparison Matrix

The following table provides an overview of the AutoDome camera family and its available features:

Standard Features

AutoDome

AutoDome

AutoDome

AutoDome

100 Series

200 Series

300 Series

500i Series

 

Interchangeable Modules

 

 

 

 

High Speed PTZ

 

 

 

 

Preset Shots

 

64

99

99

Preset Tour

 

 

 

 

Guard Tour

 

 

 

 

Alarm Inputs

 

 

7/4

7/4

High Resolution Camera

 

 

 

 

Day/Night Operation

 

 

 

 

IR Sensitive

 

 

 

 

SensUp Extended Sensitivity

 

 

 

 

UTP/Coax Transmission

 

 

 

 

Hybrid Analog/IP Connectivity

 

 

 

 

Bilinx Remote Configuration*

 

 

 

 

Cable Compensation

 

 

 

 

Hot-Swap Camera Modules

 

 

 

 

Ruggedized, Vandal-Resistant Enclosure

 

 

 

 

Advanced Features

AutoTrack II Motion Tracking

Video Motion Detection

Image Stabilization

Privacy Masking and Sector Blanking

Advanced Alarm Control

*Compatible over Coax and UTP transmission only. Remote configuration over IP via web

interface.

Certifications and approvals

Electromagnetic

 

Complies with FCC Part 15, ICES-003, and CE

Compatibility (EMC)

regulations, including EN50130-4 and

 

 

 

EN50121-4

 

 

 

 

Product Safety

 

Complies with CE regulations, UL, CSA, EN,

 

 

 

and IEC Standards

 

 

 

 

 

 

 

Region

 

Certification

 

 

 

 

Europe

 

CE

EMC Directive, Low-Voltage Directive

 

 

 

 

Installation/configuration notes

Ordering Guide

1 Video Format

6 Power5

 

1

PTZ PAL

0

24 VAC1

2

PTZ NTSC

1

120 VAC

2 Camera Type

2

230 VAC

1

18x Color PTZ

7 Mount

 

3 Enclosure

W

Wall

C

In-ceiling2

M

Mast

P

Indoor Pendant

C

Corner

E

Outdoor Pendant

R

Roof4

4 Bubble

 

P

Pipe

C

Clear Rugged

8 Fiber Optics

T

Tinted Rugged

_

No Fiber

5 Communications

F

Fiber3

SStandard Analog (Coax/ UTP)

EEthernet (TCP/IP)

1 No transformer included. Customer must supply an approved 24 VAC limited power supply (VG4-A-PSUx or equivalent).

2 Recessed in-ceiling housing units do not require kit options for reference numbers 6, 7, or 8.

3 Fiber optic option is multi-mode with biphase. Requires LTC 4629 at the system.

4 Roof mount mounts to vertical Parapet. For flat roof installation, order an additional LTC 9230/01 Flat Roof Adapter Plate.

5 Optional trim skirt available as a separate purchase.

Technical specifications

Camera 18x Color

Imager

1/4 in. Exview HAD CCD

 

 

 

(752 x 582 PAL)/(768 x 494 NTSC)

 

 

Lens

18x Zoom (4.1–73.8 mm)

 

F1.4 to F3.0

 

 

4 | AutoDome 200 Series PTZ Camera System

Focus

 

 

Automatic with manual override

 

 

 

 

 

 

 

 

 

Iris

 

 

Automatic with manual override

 

 

 

 

 

 

 

 

 

 

Field of View

 

 

2.7° to 48°

 

 

 

 

 

 

 

 

 

 

 

Video Output

 

 

1.0 Vp-p, 75 Ohm

 

 

 

 

 

 

 

 

 

 

Gain Control

 

 

Off/Auto (with adjustable limit)

 

 

 

 

 

 

 

 

 

Synchronization

 

 

Line-Lock (–120° to 120° vertical phase

 

 

 

 

 

adjust) or internal crystal

 

 

 

 

 

 

 

 

 

 

Aperture Correction

 

Horizontal and vertical

 

 

 

 

 

 

 

 

 

 

Horizontal Resolution

 

NTSC: 470 TVL, typical

 

 

 

 

 

 

PAL: 480 TVL, typical

 

 

 

 

 

 

 

 

 

 

 

Sensitivity (typical)

 

30 IRE

 

50 IRE

 

 

 

 

 

 

 

 

 

 

 

 

F1.4, 1/60 (1/50)

 

 

0.5 lx

 

0.8 lx

 

shutter, max AGC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Electronic Shutter Speed

 

1 to 1/10,000

 

(AES)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SNR

 

 

>50 dB

 

 

 

 

 

 

 

 

 

 

 

 

 

White Balance

 

 

2000 K to 10,000 K

 

 

 

 

 

 

 

 

 

 

 

Mechanical/Electrical

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model

 

In-Ceiling

 

 

Indoor

 

EnviroDome®

 

 

 

 

 

 

 

Pendant

 

 

 

 

 

 

 

 

 

 

 

Weight

 

2.66 kg

 

 

2.88 kg

 

3.32 kg

 

 

 

(5.86 lb)

 

 

(6.3 lb)

 

(7.3 lb)

 

 

 

 

 

 

 

 

 

Pan Range

 

360° cont.

 

 

360° cont.

 

360° cont.

 

 

 

 

 

 

 

 

 

Tilt Angle

 

1° above

 

 

18° above

 

18° above

 

 

 

horizon

 

 

horizon

 

horizon

 

 

 

 

 

 

 

 

Variable

 

0.1°/s-120°/s

 

0.1°/s-120°/s

 

0.1°/s-120°/s

Speed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-position

 

Pan: 360°/s

 

Pan: 360°/s

 

Pan: 360°/s

Speed

 

Tilt: 100°/s

 

Tilt: 100°/s

 

Tilt: 100°/s

 

 

 

 

 

 

 

 

 

Preset

 

± 0.1° typ.

 

 

± 0.1° typ.

 

± 0.1° typ.

Accuracy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power

 

21-30 VAC

 

21-30 VAC

 

21-30 VAC

 

 

 

50/60 Hz

 

 

50/60 Hz

 

50/60 Hz

 

 

 

 

 

 

 

 

 

 

 

Power Draw: (typ)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog

 

10 W

 

 

10 W

 

46 W6

 

Models

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ethernet

 

14 W

 

 

14 W

 

50 W6

 

Models

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 Add 16 W if using VG4-SHTR-XT kit.

Surge Suppression

Protection on

Peak current 10 kA (Gas Tube Arrester), peak

Video

power 1000 W (10/1000 μ)

 

 

Protection on

 

 

 

 

Peak current 17 A, peak power 300 W (8/20 μ)

Alarm Inputs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Protection on

 

 

 

 

Peak current 2 A, peak power 300 W (8/20 μ)

Alarm Outputs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Protection on

 

 

 

 

Peak current 7.3 A, peak power 600 W

Relay Outputs

 

 

 

 

(10/1000 μ)

 

 

 

 

 

 

 

 

 

 

 

 

Protection on

 

 

 

 

Peak current 7.3 A, peak power 600 W

Power Input

 

 

 

 

(10/1000 μ)

 

 

(Dome)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Protection on

 

 

 

 

Peak current 21.4 A, peak power 1500 W

Power Output

 

 

 

 

(10/1000 μ)

 

 

(Arm Power

 

 

 

 

 

 

 

 

 

 

Supply)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Environmental

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model

 

In-Ceiling

 

Indoor

 

EnviroDome®

 

 

 

 

 

 

 

 

Pendant

 

 

 

 

 

 

 

 

 

 

 

 

 

Design

 

Plenum Rated

 

IP66

 

IP66

Rating

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operatin

 

–10°C to 50°C

 

–10°C to 50°C

 

–40°C to 50°C

g

 

(14°F to

 

(14°F to

 

(–40°F to 122°F)

Temp.

 

122°F)

 

122°F)

 

 

 

 

 

 

 

 

 

 

 

 

 

Storage

 

–40°C to 60°C

 

–40°C to 60°C

 

–40°C to 60°C

Temp.

 

(–40°F to

 

(–40°F to

 

(–40°F to 140°F)

 

 

140°F)

 

140°F)

 

 

 

 

 

 

 

 

 

 

 

 

 

Humidity

 

0% to 90%

 

0% to 90%

 

0% to 100%

 

 

relative, non-

 

relative, non-

 

relative,

 

 

condensing

 

condensing

 

condensing

 

 

 

 

 

 

 

 

 

 

 

Miscellaneous

 

 

 

 

 

 

 

 

 

 

 

 

Sectors/Titling

 

16 independent sectors with 20-character titles/

 

 

 

 

sector

 

 

 

 

 

 

 

 

 

Camera Setup/

 

Biphase, RS-232, RS-485, Bilinx7 (coax)

Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Communication

 

Biphase, Bilinx7, Pelco P, and Pelco D

s Protocols

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-positions

 

 

64, each with 20-character titles

 

 

 

 

 

 

 

 

Preset Tour

 

 

One (1), consisting of up to 64 scenes,

 

 

 

 

consecutively

 

 

 

 

 

 

 

 

 

 

Supported

 

 

Czech, Dutch, English, French, German, Italian,

Languages

 

 

Polish, Portuguese, Russian and Spanish

 

 

 

 

 

 

 

7 Bilinx not available on Ethernet models.

 

 

 

 

User Connections

 

 

 

 

 

 

 

 

 

 

Power (Camera)

 

 

21-30 VAC, 50/60 Hz

 

 

 

 

 

 

 

 

Power (Heater)

 

 

21-30 VAC, 50/60 Hz

 

 

 

 

 

 

 

 

 

 

Biphase ±

 

 

 

 

Control Data

 

 

 

 

 

 

 

 

 

 

Audio Line In8

 

 

 

 

9 K Ohm typ, 5.5 Vp-p max

 

 

Protection on Peak current 10 A, peak power 300 W (8/20 μ) RS-232/485,

Biphase

Loading...
+ 7 hidden pages