VG4-MTRN-0
Video | AutoDome Modules and Accessories
AutoDome Modules and Accessories
www.boschsecurity.com
u Interchangeable Central Processing Unit (CPU),
Camera, Housing and Communications modules
u Analog and Hybrid (analog/IP) Communications
module options
u 24 VAC, 120 VAC, and 230 VAC Power Supply Units
with an optional Fiber Optic Module
u Roof, Pipe, and Pendant Arm Mounting Systems
u Analog and IP Fiber Optic Communication Units
The Bosch AutoDome modular camera system is a
revolutionary new concept in dome cameras. The
entire AutoDome system is based on five
interchangeable modules: the Central Processing Unit
(CPU), camera, housing, communications, and power
supply. Simply swap one of the AutoDome’s
interchangeable modules and quickly upgrade from
analog to IP, color to day/night, or add motion
detection, and AutoTrack. Never before have you had
the ability to adapt a security system to your changing
needs this quickly or inexpensively.
The Bosch AutoDome also features a selection of
power supply and mounting accessories with clear or
tinted bubbles.
Interchangeable modules
Five interchangeable modules allow you to update
camera functionality quickly and cost-effectively. Using
common components lets you install a basic camera
system today and migrate to a more advanced version
tomorrow – without having to replace the entire dome,
thus protecting your initial investment.
By using the same housing components, all
installations have a consistent look, and observers
have no idea which type of camera (if any) is watching
over them. This unique, modular design also gives you
the flexibility to move cameras between different
housings when special coverage is needed, or as site
plan requirements change. For example, an 18x PTZ
camera over a specific area could easily be “hot-
swapped” to a 26x day/night without removing the
power. AutoDome’s Ethernet communications module
allows you to add IP functionality while maintaining
connectivity to existing analog inputs and outputs.
Functions
CPU Modules
100 Series CPU Module
The 100 Series CPU module provides fixed camera
functionality, “hotswap” camera module replacement,
pluggable communications module upgrades, and
built-in surge suppression.
200 Series CPU Module
The 200 Series CPU module delivers fast 360° per
second pan/tilt/zoom speeds, “hotswap” camera
module replacement, pluggable communications
module upgrades, built-in surge suppression,
advanced diagnostics, and multilingual displays.
This module supports 64 pre-positions and a single
preset tour. The preset tour has the capacity for up to
64 pre-positions with a configurable dwell time
between pre-positions.
300 Series CPU Module
The 300 Series CPU module includes all of the
features of the 200 Series plus additional presets and
tours, cable compensation to extend cabling
distances, and third-party protocol support. The
Advanced Series also supports privacy masking and
advanced alarm handling via a built-in rules engine.
500i Series CPU Module
The 500i Series CPU module includes all of the
features of the 300 Series plus AutoTrackII motion
tracking and video motion detection.
Camera Modules
High-performance Fixed Camera
The high-performance fixed cameras have a 1/3-inch
interline CCD with Bosch’s unique 15-bit Dinion digital
imaging technology to deliver a 32-fold sensitivity
improvement and a full 540 horizontal lines of
resolution. Available in color and day/night versions,
these cameras incorporate a number of features not
found in other fixed dome cameras.
High-performance 18x PTZ Color Camera
The high-performance 18x PTZ color cameras have a
1/4-inch color CCD. With 470/480 TVL (NTSC/PAL)
horizontal resolution and sensitivity down to 0.5 lux,
this camera offers exceptional performance at an
affordable price. A rugged motor with fewer moving
parts mean that this camera uses less power and is
extremely reliable, making it ideal for high-usage
applications.
High-performance 18x and 26x PTZ Day/Night
Camera
The high-performance PTZ day/night cameras have
470/480 TVL (NTSC/PAL) horizontal resolution. These
cameras are available with either an 18x or a 26x
optical zoom lens, and all cameras offer a full 12x
digital zoom. The AutoScaling (proportional zoom) and
AutoPivot (automatically rotates and flips the camera)
features ensure optimal control.
High-performance 36x PTZ Day/Night Camera
Bosch offers the industry-leading 36x optical zoom
lens with a full 12x digital zoom. The 36x camera
provides a full 540 TVL of horizontal resolution for
outstanding clarity and image detail. The 36x camera
also incorporates an advanced backlight compensation
technology that dramatically improves the dynamic
range by 128 times, resulting in clear image
reproduction in extreme high-contrast environments.
Housing Modules
All housings feature recessed screws and latches for
increased tamper resistance.
AutoDome pendant housings (indoor and outdoor) are
rated to provide IP 66 protection. In addition, the
pendant housings come equipped with a low-impact,
high-resolution acrylic bubble for enhanced image
clarity
AutoDome in-ceiling housings are rated IK 8
(IEC 62262). These housings feature an impact-
resistant polycarbonate Rugged Bubble to protect your
camera from vandalism. The Rugged Bubble can
withstand impacts equivalent to a 4.5 kg (10 lb)
weight dropped from a height of 3 m (10 ft).
Outdoor EnviroDome housings provide an operating
temperature range down to -40°C (-40°F). The optional
“XT” extreme temperature kit allows an AutoDome to
operate in temperatures down to -60°C (-76°F),
ensuring reliable operation in even the harshest
environments.
The Pressurized Environmental Housing is rated to
provide IP 67 protection for a VG4 Series AutoDome
®
Modular Camera System from the elements, both
natural and manmade. It is the ideal surveillance
solution for applications that require frequent wash-
down, including traffic, transit, bridges, tunnels and
coastal installations where salt, moisture, dust, insects
and fumes threaten the long-term operation of the
camera.
Communications Modules
Fixed Communications Module
The Fixed Communications Module (standard on the
AutoDome 100 Series) supports a variety of standard
video and data transmission methods, including Bilinx
(over coax and UTP) remote control, configuration,
and firmware updates can also be performed over
these cables, offering you unparalleled control of your
cameras.
Standard Analog Communications Module
The Standard Analog Communications Module
(standard on the AutoDome 200 and 300 Series)
supports a variety of data transmission methods,
including Bilinx (over coax and UTP) and fiber. Remote
control, configuration, and firmware updates can also
be performed over these cables, offering you
unparalleled control of your cameras. Cable
compensation provides extended coaxial and UTP
distance runs while preventing the image quality
degradation caused by signal losses from long cable
lengths.
Alternative Protocol Communications Module
The Alternative Protocol Module allows you to control
a VG4 AutoDome from an American Dynamics
Manchester or Sensormatic RS-422 PTZ control
device.
TCP/IP Communications Module
The TCP/IP Communications Module is an integral part
of Bosch’s AutoDome Modular Camera System, adding
network connectivity to any AutoDome 100, 200, 300
or 500i Series camera. The TCP/IP module provides
complete network-based control of all dome
functionality including pan/tilt/zoom operation,
presets, tours, and alarms as well as web-based
configuration of all dome settings.
2
| AutoDome Modules and Accessories
AutoDome cameras equipped with the TCP/IP
Communications Module deliver true hybrid operation.
With both Ethernet and analog BNC connections,
network-enabled AutoDome cameras provide direct
network connection while simultaneously supporting
existing analog equipment. The TCP/IP
Communications Module uses the latest compression
technology, bandwidth throttling, and tri-streaming
capabilities to efficiently manage bandwidth and
storage requirements while delivering outstanding
image quality.
Power Supplies
Bosch offers a variety of power supply units that are
available with 24 VAC, 120 VAC, or 230 VAC
transformers, come with an optional analog,
multimode Fiber Optic video transmitter/data receiver
module, and are NEMA-rated.
Accessories
Fiber Optic Kits
The VG4-SFIBER-MM (multimode) is an analog, fiber
optic conversion kit for use with VG4 Series
AutoDomes using either the Fixed or the Standard
Communications Modules. This module is a video
transmitter/data receiver modules designed to be
mounted directly into a VG4 AutoDome power supply
box.
The VG4-SFPSCKT is a unique media converter module
for use with VG4 series AutoDomes incorporating the
Ethernet (TCP/IP) Communications Module. This
media converter module is designed to accept any of
the 10/100 Mbps SFP modules described below.
The media converter module along with the SFP
module is user installed directly into the AutoDome's
power supply box to provide an integrated fiber optic
solution.
Mounts
Bosch offers three mounting options for the
AutoDomes: roof, pipe, or pendant arm mounts. The
pendant arm mounts come with a connected power
supply unit. In addition, Bosch offers an accessory to
mount a unit in an upright position on a flat surface.
Bubbles
All housings feature recessed screws and latches for
increased tamper resistance. AutoDome in-ceiling
models feature an impact-resistant rugged
polycarbonate bubble to protect your camera from
vandalism. Designed to meet stringent strength
standards without compromising optical clarity, the
Rugged Bubble can withstand impacts equivalent to a
10 pound (4.5 kilograms) weight dropped from a
height of 10 feet (3 meters). AutoDome pendant
cameras come equipped with a low-impact, high-
resolution acrylic bubble for enhanced image clarity,
but can easily be upgraded to the Rugged Bubble
when needed.
Both the rugged polycarbonate and the high-resolution
acrylic bubbles are available in clear, tinted (smoke),
gold and chrome. The clear bubble offers maximum
sensitivity by allowing as much light through as
possible. The tinted, gold and chrome bubbles offer
covertness by making it difficult to see the direction
the camera is looking from the outside.
Certifications and approvals
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations
Product Safety Complies with CE regulations, UL, CSA, EN,
and IEC Standards
Region Certification
Europe CE VG4-1ab-cdefgh, VG4-2ab-cdefgh,
VG4-3ab-cdefgh, VG4-5ab-cdefgh, VG4-
A-PAxx, VG4-A-PSUxx
CE EMC Directive, Low-Voltage Directive
Technical specifications
Central Processor Unit Modules
VG4-MCPU-100 Unity Pass-through CPU, 100 Series
VG4-MCPU-200 Basic CPU, 200 Series
VG4-MCPU-300 Standard CPU, 300 Series
VG4-MCPU-500 Advanced CPU with Video Content Analysis, 500
Series
Camera Modules
2.7–13.5 mm Fixed Color Camera
Availability 100 Series only
VG4-MCAM-51 PAL
VG4-MCAM-61 NTSC
Imager 1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris Automatic
Field of View 78.3° to 18.5°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off, auto (with adjustable limit), and
manual
Synchronization Line-Lock (0° to 358° vertical phase
adjust) or internal crystal
Aperture Correction Horizontal and vertical
Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL)
Sensitivity (typical) 30 IRE 50 IRE
3 | AutoDome Modules and Accessories
SensUp Off 0.29 lx 0.9 lx
SensUp On (15x) 0.029 lx 0.09 lx
SNR >50 dB
White Balance 2500 K to 9000 K (with AWB hold mode
and manual mode)
2.7–13.5 mm Fixed Day/Night Camera
Availability 100 Series only
VG4-MCAM-52 PAL
VG4-MCAM-62 NTSC
Imager 1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris Automatic
Field of View 78.3° to 18.5°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off, auto (with adjustable limit), and
manual
Synchronization Line-Lock (0° to 358° vertical phase
adjust) or internal crystal
Aperture Correction Horizontal and vertical
Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL)
Sensitivity (typical) 30 IRE 50 IRE
Day Mode
SensUp Off 0.29 lx 0.9 lx
SensUp On (15x) 0.029 lx 0.09 lx
Night Mode
SensUp Off 0.12 lx 0.36 lx
SensUp On (15x) 0.012 lx 0.09 lx
SNR >50 dB
White Balance 2500 K to 9000 K (with AWB hold mode
and manual mode)
5–50 mm Fixed Color Camera
Availability 100 Series only
VG4-MCAM-53 PAL
VG4-MCAM-63 NTSC
Imager 1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris Automatic
Field of View 47.5° to 5.0°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off, auto (with adjustable limit), and
manual
Synchronization Line-Lock (0° to 358° vertical phase
adjust) or internal crystal
Aperture Correction Horizontal and vertical
Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL)
Sensitivity (typical) 30 IRE 50 IRE
SensUp Off 0.42 lx 1.3 lx
SensUp On (15x) 0.042 lx 0.13 lx
SNR >50 dB
White Balance 2500 K to 9000 K (with AWB hold mode
and manual mode)
5–50 mm Fixed Day/Night Camera
Availability 100 Series Only
VG4-MCAM-54 PAL
VG4-MCAM-64 NTSC
Imager 1/3 in. Interline CCD
(752 x 582 PAL)/(768 x 492 NTSC)
Lens
Iris Automatic
Field of View 47.5° to 5.0°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off, auto (with adjustable limit), and
manual
Synchronization Line-Lock (0° to 358° vertical phase
adjust) or internal crystal
Aperture Correction Horizontal and vertical
Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL)
Sensitivity (typical) 30 IRE 50 IRE
Day Mode
SensUp Off 0.42 lx 1.3 lx
SensUp On (15x) 0.042 lx 0.13 lx
Night Mode
SensUp Off 0.17 lx 0.52 lx
SensUp On (15x) 0.017 lx 0.052 lx
4 | AutoDome Modules and Accessories
Loading...