Bosch GSR 1080-LI, GSR 1440-LI, GSR 1800-LI User Manual

OBJ_BUCH-1310-008.book Page 1 Thursday, November 26, 2015 2:21 PM

Robert Bosch Power Tools GmbH

70538 Stuttgart

GERMANY

GSR Professional

www.bosch-pt.com

1 609 92A 1TH (2013.02) O / 37 ASIA	1080-LI | 1440-LI | 1800-LI

en Original instructions cn tw

ko

th

id Petunjuk-Petunjuk untuk Penggunaan Orisinal vi Bản gốc hướng dẫn sử dụng

OBJ_BUCH-1310-008.book Page 2 Thursday, November 26, 2015 2:18 PM

2 |

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3

. . . . . . . . . . . . . . . . . . . .		7
. . . . . . . . . . . . . . . . . . . .	.	11
. . . . . . . . . . . . . . . . . . . . . . . . .	14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	18

Bahasa Indonesia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Halaman 23

Tiếng Việt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trang 27

	1 609 92A 1TH | (26.11.15)				Bosch Power Tools

OBJ_BUCH-1310-008.book Page 3 Monday, October 24, 2016 2:05 PM

English

General Power Tool Safety Warnings

WARNING	Read all safety warnings and all in-
	structions. Failure to follow the warnings

and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

English | 3

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

Power tool use and care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a hazardous situation.

Battery tool use and care

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

	Bosch Power Tools				1 609 92A 1TH | (24.10.16)

OBJ_BUCH-1310-008.book Page 4 Monday, October 24, 2016 2:05 PM

4 | English

Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety Warnings for Drills and Screwdriver

Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fastener may contact hidden wiring. Cutting accessory and fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.

Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property damage.

Switch off the power tool immediately when the tool insert jams. Be prepared for high reaction torque that can cause kickback. The tool insert jams when:

—the power tool is subject to overload or

—it becomes wedged in the workpiece.

Hold the machine with a firm grip. High reaction torque can briefly occur while driving in and loosening screws.

Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.

Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.

Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against continuous intense sunlight, fire, water, and moisture. Danger of explosion.

In case of damage and improper use of the battery, vapours may be emitted. Ventilate the area and seek medical help in case of complaints. The vapours can irritate the respiratory system.

Use the battery only in conjunction with your Bosch power tool. This measure alone protects the battery against dangerous overload.

Use only original Bosch batteries with the voltage listed on the nameplate of your power tool. When using other batteries, e. g. imitations, reconditioned batteries or other brands, there is danger of injury as well as property damage through exploding batteries.

Additional Safety and Working

Instructions

Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health and cause allergic reactions, lead to respiratory infections and/or cancer. Materials containing asbestos may only be worked by specialists.

–Provide for good ventilation of the working place.

–It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the materials to be worked.

Prevent dust accumulation at the workplace. Dusts can easily ignite.

Before any work on the machine (e. g., maintenance, tool change, etc.) as well as during transport and storage, set the rotational direction switch to the centre position. Unintentional actuation of the On/Off switch can lead to injuries.

The battery is supplied partially charged. To ensure full battery capacity, completely charge the battery in the battery charger before using for the first time.

The battery is equipped with a NTC temperature control which allows charging only within a temperature range of between 0 ° C and 45 ° C. A long battery service life is achieved in this manner.

Read the operating instructions of the battery charger.

Apply the power tool to the screw only when it is switched off. Rotating tool inserts can slip off.

Adjust the gear switch only when the machine is at a complete stop.

Always push the gear selector and turn the operating mode selector switch through to the stop. If the gear selector cannot be pushed through to the stop, briefly press the On/Off switch. Otherwise, the machine can become damaged.

Symbols

The following symbols are important for reading and understanding the operating instructions. Please take note of the symbols and their meaning. The correct interpretation of the symbols will help you to use the machine in a better and safer manner.

	1 609 92A 1TH | (24.10.16)				Bosch Power Tools

OBJ_BUCH-1310-008.book Page 5 Monday, October 24, 2016 2:05 PM

Symbol	Meaning
	GSR 1080-LI / GSR 1440-LI /
	GSR 1800-LI: Cordless Drill/Driver
	Grey-marked area: Handle (insulated
	gripping surface)
	Article number
	Read all safety warnings and all instruc-
	tions
	Before any work on the machine itself,
	remove the battery
	Always wear ear protection.
	Movement direction
	Reaction direction
	Drilling and screwdriving
	Low speed
	High speed

Mounting and Operation

English | 5

Symbol	Meaning
	Switching On
	Switching Off
	Right/left rotation
U	Rated voltage
n0 1	No-load speed (1. gear)
n0 2	No-load speed (2. gear)
M	Maximum torque according to ISO 5393
	Metal
	Wood
Ø	Drilling diameter, max.
Ø	Max. screw dia.
	Chuck clamping range
	Weight according to EPTA-Procedure
	01:2014

Delivery Scope

Cordless Drill/Driver.

Battery, application tools and other accessories shown or described are not part of the standard delivery scope.

A complete overview of accessories can be found in our accessories program.

Intended Use

The machine is intended for driving in and loosening screws as well as for drilling in wood, metal, ceramic and plastic.

Technical Data

The technical data of the machine are listed in the table on page 32.

		Action					Figure	Page
		Removing the battery					1	33
		Inserting the battery					2	33
		Mounting application tools					3	33
		Reversing the rotational direction					4	34
		Setting the torque					5	34
		Selecting the drilling position					6	35
		Gear selection, mechanical					7	35
		Switching On and Off					8	35
		Selecting Accessories					–	36
		Bosch Power Tools						1 609 92A 1TH | (24.10.16)

OBJ_BUCH-1310-008.book Page 6 Monday, October 24, 2016 2:05 PM

6 | English

Maintenance and Cleaning

For safe and proper working, always keep the machine and ventilation slots clean.

Clean the application tool, the tool holder, the power tool’s ventilations slots, and the battery’s ventilation slots each time after using.

After-sales Service and Application

Service

Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions concerning our products and their accessories.

In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine.

People’s Republic of China China Mainland

Bosch Power Tools (China) Co., Ltd. 567, Bin Kang Road

Bin Jiang District 310052 Hangzhou, P. R. China

Service Hotline: [phone] Fax: [phone]

E-Mail: [e-mail] www.bosch-pt.com.cn

HK and Macau Special Administrative Regions

Robert Bosch Hong Kong Co. Ltd. 21st Floor, 625 King’s Road North Point, Hong Kong

Customer Service Hotline: [phone] Fax: [phone]

E-Mail: [e-mail] www.bosch-pt.com.hk

Indonesia

PT. Multi Mayaka

Kawasan Industri Pulogadung

Jalan Rawa Gelam III No. 2

Jakarta 13930

Indonesia

Tel.: [phone]

Fax: [phone] / 6823

E-Mail: [e-mail]

www.bosch-pt.co.id

Philippines

Robert Bosch, Inc.

28th Floor Fort Legend Towers, 3rd Avenue corner 31st Street, Fort Bonifacio Global City, 1634 Taguig City, Philippines Tel.: [phone]

Fax: [phone] [e-mail] www.bosch-pt.com.ph

Bosch Service Center: 9725-27 Kamagong Street San Antonio Village

Makati City, Philippines Tel.: [phone] Fax: [phone]

[e-mail]

Malaysia

Robert Bosch (S.E.A.) Sdn. Bhd. No. 8A, Jalan 13/6

G.P.O. Box 10818 46200 Petaling Jaya Selangor, Malaysia Tel.: [phone] Fax: [phone]

[e-mail] Toll-Free: 1800 880188 www.bosch-pt.com.my

Thailand

Robert Bosch Ltd. Liberty Square Building No. 287, 11 Floor Silom Road, Bangrak Bangkok 10500

Tel.: [phone] Fax: [phone]

Robert Bosch Ltd., P. O. Box 2054 Bangkok 10501, Thailand www.bosch.co.th

Bosch Service – Training Centre

La Salle Tower Ground Floor Unit No.2 10/11 La Salle Moo 16

Srinakharin Road Bangkaew, Bang Plee Samutprakarn 10540 Thailand

Tel.: [phone]

Fax: [phone]

Singapore

Robert Bosch (SEA) Pte. Ltd. 11 Bishan Street 21 Singapore 573943

Tel.: [phone]

Fax: [phone] [e-mail] Toll-Free: 1800 3338333 www.bosch-pt.com.sg

	1 609 92A 1TH | (24.10.16)				Bosch Power Tools

OBJ_BUCH-1310-008.book Page 7 Monday, October 24, 2016 2:05 PM

Vietnam

Robert Bosch Vietnam Co. Ltd 10/F, 194 Golden Building 473 Dien Bien Phu Street Ward 25, Binh Thanh District 84 Ho Chi Minh City

Vietnam

Tel.: [phone] ext. 413 Fax: [phone] [e-mail] www.bosch-pt.com

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: [phone]

Fax: [phone]

Inside New Zealand:

Phone: [phone]

Fax: [phone]

Outside AU and NZ:

Phone: [phone]

www.bosch.com.au

Transport

The contained lithium ion batteries are subject to the Dangerous Goods Legislation requirements. The user can transport the batteries by road without further requirements.

When being transported by third parties (e. g.: air transport or forwarding agency), special requirements on packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.

Dispatch batteries only when the housing is undamaged. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. Please also observe possibly more detailed national regulations.

Disposal

The machine, rechargeable batteries, accessories

and packaging should be sorted for environmentalfriendly recycling.

Do not dispose of power tools and batteries/rechargeable batteries into household waste!

Batteries no longer suitable for use can be directly returned at:

| 7

Great Britain

Robert Bosch Ltd. (B.S.C.) P.O. Box 98

Broadwater Park North Orbital Road Denham

Uxbridge

UB 9 5HJ

Tel. Service: [phone] Fax: [phone]

E-Mail: [e-mail]

Battery packs/batteries:

Li-ion:

Please observe the instructions in section “Transport”, page 7.

Subject to change without notice.

!

" "

 事故。

 气体。

 会使操作者失去对工具的控制。

 未经改装的插头和相配的插座将减少电击危险。

 果你身体接地会增加电击危险。

 动工具将增加电击危险。

件。

	Bosch Power Tools				1 609 92A 1TH | (24.10.16)

OBJ_BUCH-1310-008.book Page 8 Monday, October 24, 2016 2:05 PM

8 |

 软线。

 用剩余电流动作保护器RCD RCD

 疏忽会导致严重人身伤害。

 如适当条件下使用防尘面具、防滑安全鞋、安全帽、 听力防护等装置能减少人身伤害。

/

 留在电动工具旋转零件上的扳手或钥匙会导致人身伤 害。

 样在意外情况下能很好地控制电动工具。

 发可能会卷入运动部件中。

 引起的危险。

 选用适当设计的电动工具会使你工作更有效、更安 全。

 须进行修理。

 种防护性措施将减少工具意外起动的危险。

 的。

 护不良的电动工具引发。

 的刀具不易卡住而且容易控制。

 与其用途不符的操作可能会导致危险。

 的充电器用到其他电池盒时会发生着火危险。

 用其他电池盒会发生损坏和着火危险。

 灾。

 燃烧。

 进行修理。

 进而导致操作者触电。

 控可能导致伤害。

 果水管被刺穿了会导致财物损失。

 住如果

 短暂的强大反击。

 用手持握工件更牢固。

	1 609 92A 1TH | (24.10.16)				Bosch Power Tools

OBJ_BUCH-1310-008.book Page 9 Monday, October 24, 2016 2:05 PM

 的蒸汽会刺激呼吸道。

 能确保蓄电池不会过载。

 危险以及因为蓄电池爆炸而造成的财物损失。

 和/

–P2

 中充足电。

NTC-0 °C 45 °C

 丝头上。

 起停开关。

GSR 1080-LI/GSR 1440-LI/

GSR 1800-LI:

的握持位置

| 9

/

n0	1	1
n0	2	2

MISO 5393

Ø

EPTA-Procedure 01:2014

	Bosch Power Tools				1 609 92A 1TH | (24.10.16)

OBJ_BUCH-1310-008.book Page 10 Monday, October 24, 2016 2:05 PM

10 |

	32
		1	33
		2	33
		3	33
		4	34
		5	34
		6	35
		7	35
/		8	35
		–	36

 高工作品质和安全性。

护和备件的问题。以下的网页中有爆炸图和备件的资料: www.bosch-pt.com

10

询。

滨江区滨康路567

3100524008268484(0571) [e-mail] www.bosch-pt.com.cn

 625 21

[phone]+852 2590 [e-mail]

Robert Bosch Power Tools GmbH

·

70538 Stuttgart / GERMANY

70538 /

池。

物品专家请教有关寄送危险物品的相关事宜。

中晃动。

	1 609 92A 1TH | (24.10.16)				Bosch Power Tools

OBJ_BUCH-1310-008.book Page 11 Monday, October 24, 2016 2:05 PM

/

/

请注意" "10

害。

" "

| 11

 用剩餘電流動作保護器RCD RCD

 疏忽會導致嚴重人身傷害。

 如適當條件下使用防塵面具、防滑安全鞋、安全帽、 聽力防護等裝置能減少人身傷害。

/

 留在電動工具旋轉零件上的扳手或鑰匙會導致人身傷 害。

 樣在意外情況下能很好地控制電動工具。

 髮可能會捲入運動部件中。

 引起的危險。

		
	
		

 會使你失去對工具的控制。

 未經改裝的插頭和相配的插座將減少電擊危險。

 果你身體接地會增加電擊危險。

 動工具將增加電擊危險。

件。

,

種防護性措施將減少工具意外起動的危險。

 的。

 護不良的電動工具引發。

 的刀具不易卡住而且容易控制。

 些與其用途不符的操作可能會導致危險。

	Bosch Power Tools				1 609 92A 1TH | (24.10.16)