Black & Decker Kc1451cn, Kc9652cn, Kc9651c, Kc1252, Kc9651ck Instruction Manual

®

5	4	3

2 1

5	4	3

2 1

@Ä¿,y

@Ä¿,y KC1251 @Ä¿,y KC1252KC1261

KC1451

KC1461

KC7251

KC9651

KC9652

KC9661

Congratulations!

On the purchase of your Black & Decker cordless drill.

To ensure the best results from your cordless drill please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).

Contents

Page 4

Page 5

Page 6

Page 7

Page 8

Page 9

Safety instructions

Additional drill and charger safety instructions

Electrical safety

Mains plug replacement

Fuse replacement

Extension cables

Unwanted tools and the environment

The Black & Decker guarantee

After sales service for your Black & Decker product The after sales service policy

Accessories

Extra batteries

Technical data

Features

Variable speed

Brake

Gear ratio selector

Torque adjustment collar

Fast charger and detachable battery pack Charging your cordless drill

Fitting the drill or screwdriver bit

Changing the chuck

Handy hints

Tool care

Rechargeable batteries and the environment EC declaration of conformity

Black & Decker phone numbers and addresses

Guarantee card

Cordless drills user manual

SAFETY INSTRUCTIONS

Warning! When using electric tools, the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Read all these instructions before attempting to operate this product and save these instructions.

For safe operation:

•We recommend that you take appropriate measures for the protection of hearing if the sound pressure of 85 dB (A) is exceeded.

•Keep the work area clean. Cluttered areas and benches invite injuries.

•Consider work area environment. Do not expose power tools or chargers to rain. Do not use power tools in damp or wet locations. Keep work area well lit. Do not use power tools in the presence of flammable liquids or gases.

•Guard against electric shock. Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).

•Keep children away. Do not let visitors touch the tool or extension cord. All visitors should be kept away from work area.

•Store idle tools. When not in use, tools and batteries should be stored in a dry, high or locked place, out of reach of children.

•Do not force the tool. It will do the job better and more safely at the rate for which it was intended.

•Use the right tool. Do not force small tools or attachments to do the job of a heavy duty tool. Do not use tools for purposes not intended; for example, do not use a circular saw to cut tree limbs or logs!

•Dress properly. Do not wear loose clothing or jewellery as they can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair.

•Use safety glasses. Use a face or dust mask if the cutting operation is dusty or if using in enclosed spaces.

•Secure your work. Use clamps or a vice to hold your work. It is safer than using your hand and it frees both hands to operate the tool.

•Do not overreach. Keep proper footing and balance at all times.

•Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Keep handles dry, clean and free from oil and grease.

•Remove adjusting keys and wrenches. Form the habit of checking to see that keys and adjusting wrenches are removed from tool before switching it on.

•Avoid unintentional starting. Do not carry a tool with a finger on the switch.

•Stay alert. Watch what you are doing. Use common sense. Do not operate when you are tired.

•Check damaged parts. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorised service centre unless otherwise indicated in this instruction manual. Have defective switches replaced by an authorised service agent. Do not use the tool if the switch does not turn it on and off.

•Warning! The use of any accessory or attachment, other than recommended in this instruction manual, may present a risk of personal injury.

•Have your tool repaired by a qualified person.

Repairs should only be carried out by qualified persons using original spare parts, otherwise considerable danger to the user may result.

•This electrical appliance is in accordance with the relevant standards.

Charger plug and cable

•Do not tug at the cable to pull the plug from the socket.

•Make sure the cable is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

•Keep the cable away from heat, oil, sharp edges and rough surfaces and always ensure it is in good condition.

ADDITIONAL DRILL AND CHARGER SAFETY INSTRUCTIONS

•Danger! 240 volts are present at the charging terminals. Do not probe with conductive objects or you will risk an electric shock.

•Danger! If the energy pack case is cracked or damaged, do not insert into the charger or you will risk an electric shock.

•The charger is designed for indoor use only.

•Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to a Black & Decker authorised repairer.

4