Black & Decker JE2050, JE2060GY, JE2060BL, JE2060 User Manual

0 (0)

Please Read and Save this Use and Care Book

Por favor lea este instructivo antes de usar el producto Veuillez lire et conserver ce guide d’entretien et d’utilisation

Fruit & Vegetable Juice Extractor Extractor de jugos de frutas y vegetales Centrifugeuse

Register your product online at www.prodprotect.com/applica, for a chance to WIN $100,000!

For US residents only

Registre su producto por Internet en www.prodprotect.com/applica y tendrá la oportunidad de GANAR $100,000! Solamente para residentes de EE.UU

Inscrivez votre produit en ligne à l'adresse www.prodprotect.com/applica

et courez la chance de GAGNER 100 000 $!

Aux résidents du É.-U seulement

USA/Canada 1-800-231-9786 www.prodprotect.com/applica

Accessories/Parts (USA/Canada) Accesorios/Partes (EE.UU/Canadá) Accessoires/Pièces (É.-U./Canada) 1-800-738-0245

Models

Modelos

Modèles

JE2050

JE2060

JE2060BL

JE2060GY

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety precautions should always be followed, including the following:

Read all instructions.

To protect against risk of electrical shock, do not immerse cord, plug or base unit in water or other liquid.

Close supervision is necessary when any appliance is used by or near children.

Unplug from the outlet when not in use, before putting on or taking off parts and before cleaning.

Avoid contact with moving parts.

Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment. Or, call the appropriate toll-free number on the cover of this manual.

The use of accessories or attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.

Do not use outdoors.

Do not let cord hang over edge of the table or counter.

Always make sure juicer cover is clamped securely in place before motor is turned on. Do not unfasten clamps while juicer is in operation.

Be sure to turn switch to OFF position after each use of your juicer. Make sure the motor stops completely before disassembling.

Do not put your fingers or other objects into juicer opening while it is in operation. If food becomes lodged in opening, use food pusher or other piece of fruit or vegetable to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.

Do not use this appliance if the rotating sieve is damaged.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG (120V Models Only)

This appliance has a polarized plug (one blade is wider than the other).

To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.

ELECTRICAL CORD

The cord of this appliance was selected to reduce the possibility of tangling in or tripping over a longer cord. If more length is needed, use an extension cord rated no less than 15-amperes. (For 220 volts rated products, use an extension cord rated no less than 6-amperes). When using an extension cord, do not let it drape over the working area or dangle where someone could accidentally trip over it. Handle cord carefully for longer life; avoid jerking or straining it at outlet and appliance connections.

Note: If the power supply cord is damaged, it should be replaced by qualified personnel. In Latin America, by an authorized service center.

1

2

Black & Decker JE2050, JE2060GY, JE2060BL, JE2060 User Manual

Product may vary slightly from what is illustrated.

OFF

LOW

HI

 

 

 

 

 

† 1. Fruit and vegetable feeder

Model JE2050 (Part# SJE051060900, Model JE2060 (Part#SJE051061000) Model JE2060BL (Part# JE2060BL-01), Model JE2060GY (Part# JE2060GY-01)

2. Food tray (Part# SJE081030100), Model JE2050 (Part# SJE081030200)

3.Food Chute

4. Clear cover (Part# SJE081040100)

5. Stainless steel cutter/strainer (Part# CJEK0051)

6. Pulp separator (Part# SJE081050100)

7.Continuous flow juice spout

8. Juice container (Part# SJE081110100)

9. Safety locking latch (on each side) Model JE2050 (Part# SJE081080200) Model JE2060 (Part# SJE081080400), Model JE2060BL (Part# JE2060BL-02) Model JE2060GY (Part# JE2060GY-02)

10.Non-slip rubber feet

†11. Removable pulp container (Part# SJE081110100)

12.Off/Low/High control

13.Cord storage compartment †Consumer replaceable/removable parts

3

How to Disassemble

A

B

C

1.To unlock the locking latches, pull open at the bottom of each latch to disengage from the groove on the cover (A).

2.To remove the cover, take out the feeder and food tray; grasp the chute and pull up the cover (B).

3.To remove the pulp separator, grip the juice spout with one hand and the back edge of the pulp separator with the other hand. Pull it up with the cutter/strainer in place (C).

 

4.To remove the cutter/strainer, hold the juice spout with one

 

hand and grasp the cutter/strainer rim with the other hand;

 

pull it out (D).

D

Caution: The cutter/strainer teeth are very sharp. Handle it

 

carefully.

5. To remove the pulp container, grasp the sides firmly and slide it out.

How to Use

This appliance is for household use only.

Important: Before you use it for the first time, disassemble the unit (see How to Disassemble section); wash all parts as instructed in the Care and Cleaning section.

How to Assemble and Use

1. Place the pulp separator on the base with the juice spout facing

you (E).

E

2. Insert the cutter/stainer in the center of the pulp separator. Turn it left and right a few times until it fits into place (F).

F

3. Grip the pulp container and slide it in until it snaps into place

(G).

G

4

H

J

OFF

 

LOW

 

HI

K

4.Place the cover on top of the pulp separator with feeder in place (H).

5.Lock the locking latches by pressing down the cover as you fit the tab at the top of each latch into the groove on each side of the cover. Press the bottom of each latch until you hear it click into place (J).

Important: The unit will not operate until the locking latches are locked.

6.Place the juice cup under the juice spout (K).

7.Cut food into pieces to fit the food chute.

8.Plug unit into an AC outlet. Turn the unit on by turning the control to the Low or High speed position.

9.Place food in the food chute and press lightly with feeder.

10.Every time the pulp container is almost full, turn off and unplug the unit, empty the pulp container and clean the cutter/strainer before you start juicing again.

Caution: The cutter/strainer teeth are very sharp. Handle carefully.

11. When juicing is completed, turn off unit and unplug from outlet.

Food Tray

1.Follow steps 1-3 in the HOW TO ASSEMBLE AND USE section.

2.Place the cover on top of the pulp separator.

3. Insert food tray through the food chute and place on top of the cover (L).

L

4. Insert feeder through the food chute on the food tray (M).

Note: Use the food tray to hold small fruits, such as berries, grapes, mixed fruit pieces or mixed vegetable pieces as you process them

through the food chute.

5. Follow steps 5-11 in the How to assemble and Use section.

M

Juicing Tips

When juicing carrots, do not overfill the food chute. Place carrots one by one and use gentle pressure.

Juicing avocados or bananas will produce a puree rather than a juice.

When juicing large quantities of fruits and vegetables, stop and empty the pulp container as it begins to get full and clean the cutter/strainer before you start juicing again.

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service personnel.

To Clean the Unit

Always clean all parts after every use to prolong the life of the unit.

1.Turn unit OFF and unplug from electric outlet.

2.Disassemble all parts. See How to Disassemble section.

3.Wash the feeder, food chute, cover, cutter/strainer, pulp separator, juice spout, juice cup and pulp container in warm sudsy water or in the dishwasher (top rack only).

Caution: The cutter/strainer teeth are very sharp. Handle carefully.

4. Wipe the base with a damp cloth or sponge. Never immerse the unit in water. Note: Over time, parts may change color (especially from juicing carrots or beets).

To Store the Unit

Fold the cable into the cord storage compartment on the side of the unit (N).

N

5

6

Loading...
+ 9 hidden pages