Beko WMB 51021 PL PT Operating Instructions

0 (0)

WMB 51021 PL Y

Washing Machine

User’s Manual

Pralka automatyczna

Instrukcja obsługi

Document Number

2820523221_EN/ 07-12-12.(9:26)

1 Important instructions for safety and environment

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

1.1 General safety

This product can be used by children at and above 8 years old and by persons whose physical,sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out.Children must not play with the product.Cleaning and maintenance works should not be performed by children unless they are supervised by someone.

Never place the product on a carpet-covered floor. Otherwise,lack of airflow beneath the machine will cause electrical parts to overheat.This will cause problems with your product.

If the product has a failure,it should not be operated unless it is repaired by theAuthorized ServiceAgent.

There is the risk of electric shock!

This product is designed to resume operating in the event of powering on after a power interruption.If you wish to cancel the programme,see "Cancelling the programme" section.

Connect the product to a grounded outlet protected by a 16A fuse.Do not neglect to have the grounding

installation made by a qualified electrician.Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

The water supply and draining hoses must be securely fastened and remain undamaged.Otherwise,there is the risk of water leakage.

Never open the loading door or remove the filter while there is still water in the drum.Otherwise,risk of flooding and injury from hot water will occur.

Do not force open the locked loading door.The loading door will be ready to open just a few minutes after the washing cycle comes to an end.In case of forcing the loading door to open,the door and the lock mechanism may get damaged.

Unplug the product when not in use.

Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!

Never touch the plug with wet hands! Never unplug by pulling on the cable,always pull out by grabbing the plug.

Use detergents,softeners and supplements suitable for automatic washing machines only.

Follow the instructions on the textile tags and on the detergent package.

The product must be unplugged during installation, maintenance,cleaning and repairing procedures.

Always have the installation and repairing procedures carried out by the Authorized Service Agent.

Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

If the power cable is damaged,it must be replaced by the manufacturer,after sales service or a similarly qualified

person (preferably an electrician) or someone designated by the importer in order to avoid possible risks.

1.2 Intended use

This product has been designed for domestic use.It is not suitable for commercial use and it must not be used out of its intended use.

The product must only be used for washing and rinsing of laundry that are marked accordingly.

The manufacturer waives any responsibility arisen from incorrect usage or transportation.

1.3 Children's safety

Packaging materials are dangerous to children.Keep packaging materials in a safe place away from reach of the children.

Electrical products are dangerous for the children.Keep children away from the product when it is in use.Do not let them to tamper with the product.Use child lock to prevent children from intervening with the product.

Do not forget to close the loading door when leaving the room where the product is located.

Store all detergents and additives in a safe place away from the reach of the children by closing the cover of the detergent container or sealing the detergent package.

1.4 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

1.5 Disposing of the waste product

This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.Therefore,do not dispose the product with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment.Please consult your local authorities to learn the nearest collection point. Help protect the environment and natural resources by recycling used products.For children's safety,cut the power cable and break the locking mechanism of the loading door so that it will be non-functional before disposing of the product.

1.6 Compliance with WEEE Directive

This appliance’s packaging material is

recyclable.Help recycle it and protect the environment by dropping it off in the municipal

receptacles provided for this purpose. Your appliance also contains a great amount of

recyclable material.It is marked with this label to indicate the used appliances that should not be mixed with other waste.This way,the appliance recycling

organised by your manufacturer will be done under the best possible conditions,in compliance with European Directive 2002/96/EC onWaste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

2 / 40 EN

Washing Machine / User’s Manual

 

 

Preparation of the location and electrical,tap water and waste water installations at the place of installation is under customer's responsibility.
warning: Installation and electrical connections of the product must be carried out by theAuthorized ServiceAgent.Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
warning: Prior to installation,visually check if the product has any defects on it.If so,do not have it installed. Damaged products cause risks for your safety.
Make sure that the water inlet and discharge hoses as well as the power cable are not folded,pinched or crushed while pushing the product into its place after installation or cleaning procedures.

2 Installation

Refer to the nearestAuthorised ServiceAgent for installation of the product.To make the product ready for use,review the information in the user manual and make sure that the electricity,tap water supply and water drainage systems are appropriate before calling theAuthorized ServiceAgent.If they are not,call a qualified technician and plumber to have

any necessary arrangements carried out.

C

B

A

C

2.1 Appropriate installation location

Place the machine on a rigid floor.Do not place it on a long pile rug or similar surfaces.

Total weight of the washing machine and the dryer -with full loadwhen they are placed on top of each other reaches to approx.180 kilograms.Place the product on a solid and flat floor that has sufficient load carrying capacity!

Do not place the product on the power cable.

Do not install the product at places where temperature may fall below 0ºC.

Place the product at least 1 cm away from the edges of other furniture.

2.2 Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement.Remove the packaging reinforcement by pulling the ribbon.

2.Remove transportation safety bolts by turning them gently.

3.Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)

C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

C Never move the product without the transportation safety bolts properly fixed in place!

2.4 Connecting water supply

C The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa).It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly.

Attach a pressure reducing valve if water pressure is higher.

C If you are going to use the double water-inlet product as a single (cold) water-inlet unit,you must install the supplied stopper to the hot water valve before operating the product.(Applies for the products supplied with a blind stopper group.)

A warning: Models with a single water inlet should not be connected to the hot water tap.In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.

A warning: Do not use old or used water inlet hoses on the new product.It may cause stains on your laundry.

1.Connect the special hoses supplied with the product to the water inlets on the product. Red hose (left) (max. 90

ºC) is for hot water inlet,blue hose (right) (max.25 ºC) is for cold water inlet.

A warning: Ensure that the cold and hot water connections are made correctly when installing the product.

Otherwise,your laundry will come out hot at the end of the washing process and wear out.

2.3 Removing the transportation locks

2. Tighten all hose nuts by hand.Never use a tool when

tightening the nuts.

A warning: Do not remove the transportation locks before taking out the packaging reinforcement.

A warning: Remove the transportation safety bolts before operating the washing machine! Otherwise,the product will be damaged.

1.Loosen all the bolts with a suitable spanner until they rotate freely (C).

3.Open the taps completely after making the hose connection to check for water leaks at the connection

3 / 40 EN

Washing Machine / User’s Manual

points.If any leaks occur,turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.

2.5 Connecting to the drain

The end of the drain hose must be directly connected to the wastewater drain or to the washbasin.

A warning: Your house will be flooded if the hose comes out of its housing during water discharge.Moreover,there is risk of scalding due to high washing temperatures!

To prevent such situations and to ensure smooth water intake and discharge of the machine,fix the end of the discharge hose tightly so that it cannot come out.

The hose should be attached to a height of at least 40 cm,and 100 cm at most.

In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground),water discharge becomes more difficult and the laundry may come out excessively wet.Therefore,follow the heights described in the figure.

To prevent flowing of dirty water back into the machine and to allow for easy discharge,do not immerse the hose end into the dirty water or do not drive it in the drain more than 15 cm.If it is too long,cut it short.

The end of the hose should not be bent,it should not be stepped on and the hose must not be pinched between the drain and the machine.

If the length of the hose is too short,use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m.To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

2.6 Adjusting the feet

A warning: In order to ensure that the product operates more silently and vibration-free,it must stand level and balanced on its feet.Balance the machine by adjusting the feet.Otherwise,the product may move from its place and cause crushing and vibration problems.

1.Loosen the lock nuts on the feet by hand.

2.Adjust the feet until the product stands level and balanced.

3.Tighten all lock nuts again by hand.

A warning: Do not use any tools to loosen the lock nuts. Otherwise,they will get damaged.

2.7 Electrical connection

Connect the product to a grounded outlet protected by a 16 A fuse.Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

Connection must comply with national regulations.

Power cable plug must be within easy reach after installation.

If the current value of the fuse or breaker in the house is less than 16Amps,have a qualified electrician install a 16Amp fuse.

The voltage specified in the "Technical specifications" section must be equal to your mains voltage.

Do not make connections via extension cables or multiplugs.

B warning: Damaged power cables must be replaced by theAuthorized ServiceAgents.

Transportation of the product

1.Unplug the product before transporting it.

2.Remove water drain and water supply connections.

3.Drain all water that has remained in the product.

4.Install transportation safety bolts in the reverse order of removal procedure;

C Never move the product without the transportation safety bolts properly fixed in place!

A warning: Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.

4 / 40 EN

Washing Machine / User’s Manual

 

 

3 Preparation

3.1 Sorting the laundry

Sort laundry according to type of fabric,colour,and degree of soiling and allowable water temperature.

Always obey the instructions given on the garment tags.

3.2 Preparing laundry for washing

Laundry items with metal attachments such as, underwired bras,belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash the clothes by putting them in a laundry bag or pillow case.

Take out all substances in the pockets such as coins, pens and paper clips,and turn pockets inside out and brush.Such objects may damage the product or cause noise problem.

Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case.

Place curtains in without compressing them.Remove curtain attachment items.

Fasten zippers,sew loose buttons and mend rips and tears.

Wash“machine washable”or“hand washable”labeled products only with an appropriate programme.

Do not wash colours and whites together.New,dark coloured cottons release a lot of dye.Wash them separately.

Tough stains must be treated properly before washing.If unsure,check with a dry cleaner.

Use only dyes/colour changers and limescale removers suitable for machine wash.Always follow the instructions on the package.

Wash trousers and delicate laundry turned inside out.

Keep laundry items made ofAngora wool in the freezer for a few hours before washing.This will reduce pilling.

Laundry that are subjected to materials such as flour, lime dust,milk powder,etc.intensely must be shaken off before placing into the machine.Such dusts and powders on the laundry may build up on the inner parts of the machine in time and can cause damage.

3.3 Things to be done for energy saving

Following information will help you use the product in an ecological and energy-efficient manner.

Operate the product in the highest capacity allowed by the programme you have selected,but do not overload; see,"Programme and consumption table".

Always follow the instructions on the detergent packaging.

Wash slightly soiled laundry at low temperatures.

Use faster programmes for small quantities of lightly soiled laundry.

Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.

If you plan to dry your laundry in a dryer,select the highest spin speed recommended during washing process.

Do not use detergent in excess of the amount recommended on the detergent package.

3.4 Initial use

Before starting to use the product,make sure that all preparations are made in accordance with the instructions in sections“Important safety instructions”and“Installation”. To prepare the product for washing laundry,perform first operation in Drum Cleaning programme.If your product

is not equipped with Drum Cleaning programme,perform the Initial Use procedure in accordance with the methods described under“5.2 Cleaning the loading door and the drum”section of the user manual.

C Use an anti-limescale suitable for the washing machines.

C Some water might have remained in the product due to the quality control processes in the production.It is not harmful for the product.

3.5 Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired. The machine automatically adjusts the amount of water according to the weight of the loaded laundry.

A warning: Follow the information in the“Programme and consumption table”.When overloaded,machine's washing performance will drop.Moreover,noise and vibration problems may occur.

Laundry type

Weight (g)

Bathrobe

1200

Napkin

100

Duvet cover

700

Bed Sheet

500

Pillowcase

200

Tablecloth

250

Towel

200

Hand towel

100

Evening gown

200

Underclothing

100

Men’s overalls

600

Men’s shirt

200

Men’s pajamas

500

Blouses

100

3.6 Loading the laundry

1.Open the loading door.

2.Place laundry items loosely into the machine.

3.Push the loading door to close until you hear a locking sound. Ensure that no items are caught in the door.

5 / 40 EN

Washing Machine / User’s Manual

 

 

C The loading door is locked while a programme is running.

The door can only be opened a while after the programme comes to an end.

A warning: In case of misplacing the laundry,noise and vibration problems may occur in the machine.

3.7 Using detergent and softener

C When using detergent,softener,starch,fabric dye,bleach or limescale remover read the manufacturer's instructions on the package carefully and follow the suggested dosage values.Use measuring cup if available.

Detergent Drawer

The detergent drawer is composed of three compartments:

(1) for prewash

(2) for main wash

(3) for softener

(*) in addition,there is siphon piece in the softener compartment.

2 3 1

Detergent, softener and other cleaning agents

Add detergent and softener before starting the washing programme.

Never leave the detergent drawer open while the washing programme is running!

When using a programme without prewash,do not put any detergent into the prewash compartment

(compartment nr."1").

In a programme with prewash,do not put liquid detergent into the prewash compartment (compartment nr."1").

Do not select a programme with prewash if you are using a detergent bag or dispensing ball.Place the detergent bag or the dispensing ball directly among the laundry in the machine.

If you are using liquid detergent,do not forget to place the liquid detergent cup into the main wash compartment (compartment nr."2").

Choosing the detergent type

The type of detergent to be used depends on the type and colour of the fabric.

Use different detergents for coloured and white laundry.

Wash your delicate clothes only with special detergents (liquid detergent,wool shampoo,etc.) used solely for delicate clothes.

When washing dark coloured clothes and quilts,it is recommended to use liquid detergent.

Wash woolens with special detergent made specifically for woolens.

A warning: Use only detergents manufactured specifically for washing machines.

A warning: Do not use soap powder.

Adjusting detergent amount

The amount of washing detergent to be used depends on the amount of laundry,the degree of soiling and water hardness.

Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam,poor rinsing,financial savings and finally,environmental protection.

Use lesser detergent for small amounts or lightly soiled clothes.

Using softeners

Pour the softener into the softener compartment of the detergent drawer.

Do not exceed the (>max<) level marking in the softener compartment.

If the softener has lost its fluidity,dilute it with water before putting it in the detergent drawer.

Using liquid detergents

If the product contains a liquid detergent cup:

Make sure that you have placed the liquid detergent cup in compartment nr."2".

If the liquid detergent has lost its fluidity,dilute it with water before putting in the detergent cup.

If the product does not contain a liquid detergent cup:

Do not use liquid detergent for the prewash in a programme with prewash.

Liquid detergent stains your clothes when used with Delayed Start function.If you are going to use the Delayed Start function,do not use liquid detergent.

Using gel and tablet detergent

Apply the following instructions when using tablet,gel and similar detergents.

If the gel detergent thickness is fluidal and your machine does not contain a special liquid detergent cup,put the gel detergent into the main wash detergent compartment during first water intake.If your machine contains a liquid detergent cup,fill the detergent into this cup before starting the programme.

If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet,put it directly into the drum before washing.

Put tablet detergents into the main wash compartment (compartment nr."2") or directly into the drum before washing.

C Tablet detergents may leave residues in the detergent compartment.If you encounter such a case,place the tablet detergent between the laundry,close to the lower part of the drum in future washings.

C Use the tablet or gel detergent without selecting the prewash function.

6 / 40 EN

Washing Machine / User’s Manual

 

 

Using starch

Add liquid starch,powder starch or the fabric dye into the softener compartment.

Do not use softener and starch together in a washing cycle.

Wipe the inside of the machine with a damp and clean cloth after using starch.

Using bleaches

Select a programme with prewash and add the bleaching agent at the beginning of the prewash.Do not put detergent in the prewash compartment.As an alternative application,select a programme with extra rinse and add the bleaching agent while the machine is taking water from the detergent compartment during first rinsing step.

Do not use bleaching agent and detergent by mixing them.

Use just a little amount (approx.50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation.

Do not pour the bleaching agent onto the clothes and do not use it for coloured clothes.

When using oxygen based bleaches,select a programme that washes at a lower temperature.

Oxygen based bleaches can be used together with detergents; however,if its thickness is not the same with the detergent,put the detergent first into the compartment nr."2" in the detergent drawer and wait until the detergent flows while the machine is taking in water.Add the bleaching agent from the same compartment while the machine is still taking in water.

Using limescale remover

When required,use limescale removers manufactured specifically for washing machines only.

3.8 Tips for efficient washing

Soiling Level

 

 

Clothes

 

 

 

Light colours and whites

Colours

Dark colours

Delicates/

 

Woolens/Silks

 

 

 

 

 

(Recommended temperature

(Recommended temperature

(Recommended

(Recommended

 

temperature range

temperature range

 

range based on soiling level:

range based on soiling level:

 

based on soiling level:

based on soiling level:

 

40-90ºC)

cold-40ºC)

cold-40ºC)

cold-30ºC)

 

 

 

 

It may be necessary to pre-

Powder and liquid

 

 

 

 

 

 

treat the stains or perform

 

 

 

detergents recommended

 

 

 

prewash.Powder and liquid

 

Prefer liquid

Heavily Soiled

for colours can be used at

Liquid detergents

detergents recommended

detergents produced

dosages recommended for

suitable for colours

 

for whites can be used at

for delicate clothes.

 

heavily soiled clothes.It is

and dark colours can

(difficult stains such

dosages recommended for

Woolen and silk

recommended to use powder

be used at dosages

heavily soiled clothes.It is

clothes must be

as grass,coffee,

detergents to clean clay and

recommended for

recommended to use powder

washed with special

fruits and blood.)

soil stains and the stains that

heavily soiled clothes.

detergents to clean clay and

woolen detergents.

 

are sensitive to bleaches.Use

 

 

soil stains and the stains that

 

 

 

are sensitive to bleaches.

detergents without bleach.

 

 

 

 

 

 

 

 

 

 

 

Normally Soiled

 

Powder and liquid detergents

Liquid detergents

Prefer liquid

Powder and liquid detergents

detergents produced

 

recommended for whites

recommended for colours

suitable for colours

for delicate clothes.

 

can be used at dosages

and dark colours can

(For example,stains

can be used at dosages

Woolen and silk

recommended for normally

be used at dosages

caused by body on

recommended for normally

soiled clothes.Use detergents

recommended for

clothes must be

collars and cuffs)

soiled clothes.

without bleach.

normally soiled clothes.

washed with special

 

woolen detergents.

 

 

 

 

 

 

 

 

 

 

 

Powder and liquid detergents

Liquid detergents

Prefer liquid

Lightly Soiled

Powder and liquid detergents

detergents produced

recommended for colours

suitable for colours

 

recommended for whites

can be used at dosages

and dark colours can

for delicate clothes.

 

can be used at dosages

Woolen and silk

(No visible stains

recommended for lightly

be used at dosages

recommended for lightly soiled

clothes must be

soiled clothes.Use detergents

recommended for lightly

exist.)

clothes.

washed with special

 

 

without bleach.

soiled clothes.

woolen detergents.

 

 

 

 

 

 

 

 

 

7 / 40 EN

Washing Machine / User’s Manual

 

 

4 Operating the product

4.1 Control panel

1

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

4

5

6

7

1

- Programme Selection knob (Uppermost position On/Off)

5

-Auxiliary Function buttons

 

2

- Programme Follow-up indicator

6

- Delayed Start button (in some models)

3

-TemperatureAdjustment button

7

- Start / Pause button

 

 

4

- Spin Speed adjustment button

 

 

 

 

 

4.2 Preparing the machine

Make sure that the hoses are connected tightly.Plug in your machine.Turn the tap on completely.Place the laundry in the machine. Add detergent and fabric softener.

4.3 Programme selection

Select the programme suitable for the type,quantity and soiling degree of the laundry in accordance with the

“Programme and consumption table”and the temperature table below.

90˚C

Heavily soiled white cottons and linens.(coffee table

covers,tableclothes,towels,bed sheets,etc.)

 

 

Normally soiled,coloured,fade proof linens,cottons

60˚C

or synthetic clothes (shirt,nightgown,pajamas,etc.)

 

and lightly soiled white linens (underwear,etc.)

40˚C-

Blended laundry including delicate textile (veil

30˚C- Cold

curtains,etc.),synthetics and woolens.

Select the desired programme with the Programme Selection button.

C Programmes are limited with the highest spin speed appropriate for that particular type of fabric.

C When selecting a programme,always consider the type of fabric,colour,degree of soiling and permissible water temperature.

C Always select the lowest required temperature.Higher temperature means higher power consumption.

C For further programme details,see "Programme and consumption table"

4.4 Main programmes

Depending on the type of fabric,use the following main

programmes.

• Bawełna (Cottons)

Use this programme for your cotton laundry (such as bed sheets,duvet and pillowcase sets,towels,bathrobes, underwear,etc.).Your laundry will be washed with vigorous

washing action for a longer washing cycle.

• Syntetyki (Synthetics)

Use this programme to wash your synthetic clothes (shirts, blouses,synthetic/cotton blends,etc.).It washes with a gentle action and has a shorter washing cycle compared to the Cottons programme.

For curtains and tulle,use the Synthetic 40˚C programme with prewash and anti-creasing functions selected.As their meshed texture causes excessive foaming,wash the veils/ tulle by putting little amount of detergent into the main wash compartment.Do not put detergent in the prewash

compartment.

• Wełna (Woollens)

Use this programme to wash your woolen clothes.Select the appropriate temperature complying with the tags of your clothes.Use appropriate detergents for woolens.

8 / 40 EN

Washing Machine / User’s Manual

 

 

4.5 Additional programmes

For special cases,additional programmes are available in the machine.

C Additional programmes may differ according to the model of the machine.

• Bawełna Eco (Cotton Economic)

You may wash your normally soiled durable cotton and linen laundry in this programme with the highest energy and water saving compared to all other wash programmes suitable for cottons.Actual water temperature may differ from the declared cycle temperature.Programme duration may automatically be shortened during later stages of the programme if you wash less amount (e.g. ½ capacity or less) of laundry.In this case energy and water consumption will be further decreased giving you the opportunity for a more economical wash.This feature is available for certain

models having remaining time display.

• BabyProtect

Use this programme to wash baby laundry,and the laundry that belongs to allergic persons.Longer heating time and an

additional rinsing step provide a higher level of hygiene.

• Delikatne (Delicate)

Use this programme to wash your delicate clothes.It washes with a gentle action without any interim spin compared to

the Synthetics programme.

• Pranie ręczne 20 (Hand wash)

Use this programme to wash your woolen/delicate clothes that bear“not machinewashable”tags and for which hand wash is recommended.It washes laundry with a very gentle

washing action to not to damage clothes.

• Codzienne szybkie

Use this programme to quickly wash your little amount of

lightly soiled cotton clothes.

• Xpress Super Short

Use this programme to wash your little amount of lightly

soiled cotton clothes in a short time.

• Ciemne ubrania (Darkcare)

Use this programme to wash your dark coloured laundry,or the coloured laundry that you do not want them get faded.

Washing is performed with less mechanical movements at low temperature.It is recommended to use liquid detergent

or wool shampoo for dark coloured laundry.

• Mix 40

Use this programme to wash your cotton and synthetic clothes together without sorting them.

• Koszule (Shirts)

Use this programme to wash the shirts made of cotton, synthetic and synthetic blended fabrics together.

• Sport

Use this programme to wash your garments that are worn for a short time such as sportswear.It is suitable to wash little amount of cotton / synthetic blended garments.

4.6 Special programmes

For specific applications,select any of the following

programmes.

• Płukanie (Rinse)

Use this programme when you want to rinse or starch

separately.

• Wirowanie + Odpompowanie (Spin + Drain)

Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine.

Before selecting this programme,select the desired spin speed and press Start / Pause button.First,the machine will drain the water inside of it.Then,it will spin the laundry with the set spin speed and drain the water coming out of them.

If you wish to drain only the water without spinning your laundry,select the Pump+Spin programme and then select the No Spin function with the help of Spin SpeedAdjustment button.Press Start / Pause button.

C Use a lower spin speed for delicate laundries.

4.7 Temperature selection

Whenever a new programme is selected,the maximum temperature for the selected programme appears on the temperature indicator.

To decrease the temperature,press theTemperature Adjustment button.Temperature will decrease gradually.

C If the programme has not reached the heating step, you can change the temperature without switching the machine to Pause mode.

4.8 Spin speed selection

Whenever a new programme is selected,the recommended spin speed of the selected programme is displayed on the spin speed indicator.

To decrease the spin speed,press the Spin Speed Adjustment button.Spin speed decreases gradually.Then, depending on the model of the product,"Rinse Hold" and "No Spin" options appear on the display.See "Auxiliary function selection" section for explanations of these options.

C If the programme has not reached the spinning step, you can change the speed without switching the machine to Pause mode.

9 / 40 EN

Washing Machine / User’s Manual

 

 

Beko WMB 51021 PL PT Operating Instructions

4.9 Programme and consumption table

EN

 

2

 

 

 

 

 

 

Programme

 

 

(kg)LoadMax.

DurationProgramme(~min)

ConsumptionWater(l)

ConsumptionEnergy(kWh)

Speed***Max.

wstępnePranie

 

 

 

 

 

 

 

 

Bawełna

 

 

5.0

147

66

2.25

1600

90

 

Bawełna

60

 

5.0

118

66

1.45

1600

Bawełna

40

 

5.0

98

66

0.85

1600

Bawełna Eco

60**

 

5.0

190

39

0.76

1600

 

Bawełna Eco

60**

 

2.5

160

32

0.67

1600

 

Bawełna Eco

40**

 

2.5

150

32

0.57

1600

 

BabyProtect

90

 

5.0

165

85

1.90

1600

Codzienne szybkie

90

 

5.0

88

55

1.90

1400

 

Codzienne szybkie

60

 

5.0

58

55

1.00

1400

 

Codzienne szybkie

30

 

5.0

28

55

0.20

1400

 

Xpress Super Short

30

 

2.0

14

40

0.11

1400

 

Sport

40

 

3.0

101

48

0.45

800

Delikatne

30

 

2.0

59

43

0.23

600

 

Pranie ręczne 20

20

 

1.0

43

30

0.15

600

 

Wełna

40

 

1.5

60

40

0.30

600

 

Ciemne ubrania

40

 

2.5

107

58

0.45

800

 

Koszule

60

 

2.5

104

55

0.90

600

Mix40

40

 

3.0

115

45

0.50

800

Syntetyki

60

 

2.5

116

45

0.90

800

Syntetyki

40

 

2.5

106

45

0.42

800

 

 

 

 

 

 

 

 

 

Auxiliary functions

 

 

 

 

 

Temperature

Szybkie pranie

Rinse Plus

Anti-Creasing

Rinse Hold

Pet hair removal

 

Cold-90

Cold-90

Cold-90

 

 

 

 

40-60

 

 

 

 

40-60

 

 

 

 

40-60

 

*

 

 

30-90

 

 

 

Cold-90

 

 

 

Cold-90

 

 

 

Cold-90

 

 

 

Cold-30

Cold-40

 

 

Cold-40

 

 

 

 

 

20

 

 

 

Cold-40

 

*

 

 

Cold-40

*

 

Cold-60

Cold-40

Cold-60

Cold-60

 

 

 

 

 

 

• :Selectable

* :Automatically selected,no canceling.

**:Energy Label programme (EN 60456 Ed.3)

***:If maximum spin speed of the machine is lower then this value,you can only select up to the maximum spin speed.

**“Cotton eco 40°C and Cotton eco 60°C are standard cycles.”These cycles are known as‘40°C cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the symbols on the panel.

C The auxiliary functions in the table may vary according to the model of your machine.

C Water and power consumption may vary subject to the changes in water pressure,water hardness and temperature,ambient temperature,type and amount of laundry,selection of auxiliary functions and spin speed,and changes in electric voltage.

C You can see the washing time of the programme you have selected on the display of the machine.It is normal that small differences may occur between the time shown on the display and the real washing time.

10 / 40 EN

Washing Machine / User’s Manual

 

 

Never wash your pets in the washing machine.

4.10 Auxiliary function selection

Use the following auxiliary functions according to your daily needs.Select the desired auxiliary functions before starting the programme.Furthermore,you may also select or cancel auxiliary functions that are suitable to the running programme without pressing the Start / Pause button when the machine is operating.For this,the machine must be in a step before the auxiliary function you are going to select or cancel.

If the auxiliary function cannot be selected or canceled,light of the relevant auxiliary function will blink 3 times to warn the user.

C Some functions cannot be selected together.If a second auxiliary function conflicting with the first one is selected before starting the machine,the function selected

first will be canceled and the second auxiliary function selection will remain active.For example,if you want to select QuickWash after you have selected the Prewash, Prewash will be canceled and QuickWash will remain active.

C An auxiliary function that is not compatible with the programme cannot be selected.(See“Programme and consumption table”)

C Auxiliary Function buttons may vary according to the model of the machine.

• Pranie wstępne (Prewash)

A Prewash is only worthwhile for heavily soiled laundry.Not using the Prewash will save energy,water,detergent and time.

C Prewash without detergent is recommended for tulle and curtains.

• Szybkie pranie (Quick Wash)

This function can be used in Cottons and Synthetics programmes.It decreases the washing times and also the number of rinsing steps for lightly soiled laundry.

C When you select this function,load your machine with half of the maximum laundry specified in the programme table.

• Rinse Plus

This function enables the machine to make another rinsing in addition to the one already made after the main wash.

Thus,the risk for sensitive skins (babies,allergic skins,etc.) to be effected by the minimal detergent remnants on the

laundry can be reduced.

• Anti-Creasing

This function creases the clothes lesser when they are being washed.Drum movement is reduced and spinning speed is limited to prevent creasing.In addition,washing is done with a higher water level.Use this function for delicate laundry that creases easily.

• Rinse Hold

If you are not going to unload your clothes immediately after the programme completes,you may use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine.Press Start / Pause button after this process if you want to drain the water without spinning your laundry.

Programme will resume and complete after draining the water.

If you want to spin the laundry held in water,adjust the Spin Speed and press Start / Pause button.

The programme resumes.Water is drained,laundry is spun

and the programme is completed.

• Pet hair removal

This function helps to remove pet hair that remain on your garments more effectively.

When you select this function,Prewash and Extra Rinse steps are added to the normal programme.Thus,washing is performed with more water (30%) and the pet hair is

removed more effectively.

A

Delayed Start (In some models only)

With the Delayed Start function the startup of the programme may be delayed up to 3,6 or 9 hours.

C Do not use liquid detergents when you set Delayed Start!

There is the risk of staining of the clothes.

Open the loading door,place the laundry and put detergent, etc.Select the washing programme,temperature,spin speed and,if required,the auxiliary functions.Set the desired time by pressing the Delayed Start button.When the button is pressed once,3 hours delayed start is selected. When the same button is pressed again,6 hours delay is selected,and when it is pressed for the third time,9 hours delayed start is selected.If you press the Delayed Start button once again,Delayed Start function will be canceled. Press Start / Pause button.Previous delayed start time light turns off and next delayed start time light turns on after every 3 hours. At the end of the countdown,all delayed start lights will turn off and the selected programme will start.

C Additional laundry may be loaded during the delayed start period.

Changing the Delayed Start period

Press Delayed Start button.Every time the button is pressed, the period will change in 3-hour increments and the light of

the selected delayed start time will turn on.

Canceling the Delayed Start function

If you want to cancel the delayed start countdown and start the programme immediately:

Set the Delayed Start period to zero (all delayed start period lights will turn off) or turn the Programme Selection knob to any programme.Thus,Delayed Start function will be canceled.The End/Cancel light flashes continuously. Then, select the programme you want to run again.Press Start / Pause button to start the programme.

11 / 40 EN

Washing Machine / User’s Manual

 

 

4.11 Starting the programme

Press Start / Pause button to start the programme. Programme follow-up light showing the startup of the programme will turn on.

C

If no programme is started or no key is pressed within

1 minute during programme selection process,the

 

machine will switch to Pause mode and the illumination

 

level of the temperature,speed and loading door

 

indicator lights will decrease. Other indicator lights and

 

indicators will turn off.Once the Programme Selection

 

knob is rotated or any button is pressed,indicator lights

 

and indicators will turn on again.

4.12 Child Lock

Use child lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.

C If the Programme Selection knob is turned when the Child Lock is active,“Con”appears on the display. The Child Lock does not allow any change in the programmes and the selected temperature,speed and auxiliary functions.

C Even if another programme is selected with the

Programme Selection knob while the Child Lock is active,previously selected programme will continue running.

C When the Child Lock is active and the machine is running,you can switch the machine to Pause mode without deactivating the Child Lock by turning the Programme Selection knob to On / Off position.When you turn the Programme Selection knob afterwards,the programme will resu

To activate the Child Lock:

Press and hold 1st and 2ndAuxiliary Function buttons for 3 seconds.The lights on the 1st and 2ndAuxiliary Function buttons will flash while you keep the buttons pressed for 3

seconds.

To deactivate the Child Lock:

Press and hold 1st and 2nd auxiliary function buttons for 3 seconds while any programme is running. The lights on the

1st and 2ndAuxiliary Function buttons will flash while you keep the buttons pressed for 3 seconds.

C In addition to the method above,to deactivate the Child Lock,switch the Programme Selection knob to On / Off position when no programme is running,and select another programme.

C When the power is restored after a power failure or after your machine is unplugged and plugged in again,the Child Lock will not be deactivated when the machine resumes operating.

4.13 Progress of programme

Progress of a running programme can be followed from the Programme Follow-up indicator.At the beginning of every programme step,the relevant indicator light will turn on and light of the completed step will turn off.

You can change the auxiliary functions,speed and temperature settings without stopping the programme flow while the programme is running.To do this,the change you are going to make must be in a step after the running programme step.If the change is not compatible,relevant lights will flash for 3 times.

C If the machine does not pass to the spinning step, Rinse Hold function might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine.

4.14 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable.

Loading door light will start flashing when the machine is switched to Pause mode.Machine checks the level of

the water inside.If the level is suitable,Loading Door light illuminates steadily within 1-2 minutes and the loading door can be opened.

If the level is unsuitable,Loading Door light turns off and the loading door cannot be opened.If you are obliged to open the Loading Door while the Loading Door light is off,you have to cancel the current programme; see“Canceling the programme”.

Changing the selections after programme has started

Switching the machine to pause mode

Press the Start / Pause button to switch the machine to pause mode while a programme is running. The light of the step which the machine is in starts flashing in the

Programme Follow-up indicator to show that the machine has been switched to the pause mode.

Also,when the loading door is ready to be opened,Loading Door light will also illuminate continuously in addition to the

programme step light.

Changing the speed and temperature settings for auxiliary functions

Depending on the step the programme has reached,you may cancel or activate the auxiliary functions; see,“Auxiliary function selection”.

You may also change the speed and temperature settings; see,“Spin speed selection”and“Temperature selection”.

C

If no change is allowed,the relevant light will flash for

3 times.

12 / 40 EN

Washing Machine / User’s Manual

 

 

Loading...
+ 28 hidden pages