Beko WM5140 User Manual

Automatic washing machine

WM 5140 W WM 5140 S

Please read this manual first!

Dear Customer,

We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results.

Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.

This operation manual will…

…help you use your machine in a fast and safe way.

•

Please

read

the

Operation

Manual

before

installing

and

startin

machine.

•

Particularly

follow

the instructions

related

to safety.

•

Keep

this Operating

Manual within

easy

reach.

You

may

need

future.

•

Please

read

all

additional

documents

supplied

with

this

machi

Please

note

that

this

Operating

Manual

may

be applicable

for

sever

models. Differences between models will be identified in the manual.

Explanation of symbols

Throughout this Operation Manual the following symbols are used:

C	Important information or useful hints about usage.
A	Warning for hazardous situations with regard to life and property.
B	Warning for supply voltage.

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this

purpose. Your appliance also contains a great amount of recyclable

It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

TABLE OF CONTENTS

1 Your Washing Machine		4
Overview		4
Specifications		5
2 Warnings		6
General Safety		6
First Use		6
Intended use		6
Safety instructions		6
If there are children in your house...		7
Electrical connection		7
3 Installation		9
Removing packaging reinforcement		9
Opening	the transportation	locks9
Appropriate installation location		9
Adjusting the feet		9
Connecting to the water supply.		10
Connecting to the drain		10
Electrical connection		11
Destroying the packaging material		11
Disposing of the old machine		11
4 Initial preparations for
washing		12
Sorting the laundry		12
Preparing	clothes for washing 2
Correct load capacity		12
Loading door		13
Detergents and softeners		13

Extra Rinse				18
Program	selection		and consumption
table				18
Auxiliary functions				19
Time delay				19
Starting	the	Program		20
Progressing		a program		20
Changing the program after the program
has started				20
Child-proof lock				21
Ending the program through canceling
2 1
End of program				21
6 Quick instructions for
daily use				22
7 Cleaning and care				23
Detergent drawer				23
The door and the drum				23
Outer cabinet		and	control	panel3		2
Inlet water filters				23
Draining any remaining water and
cleaning the pump filter				24
8 Troubleshooting				26
91 Guarantee				34
10 Service				35

5 Selecting a Program and
Operating Your Machine	15
Control panel	15
Turning the machine on	16
Program selection	16
Spin Speed selection	17

3 EN

1	Your Washing Machine

Overview

Figure 1

1

3

2

5

6

4

1
	Top Lid			4	Height-adjustable Feet
2	Detergent Drawer			5	Door
	Control Panel				Filter Cap
3				6

4 EN

Specifications

Models						WM	5140 W	WM 5140 S
Maximum			dry	laundry	capacity	(kg)	5	5
Height	(cm)						84	84
Width	(cm)						60	60
Depth	(cm)						45	45
Net Weight			(kg)				61	61
Electricity		(V/Hz.)				230 V / 50hz		230 V / 50hz
Total	Current			(A)			10	10
Total	Power		(W)			2200		2200
Spinning		cycle		(rpm	max.)	1400		1400

Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly.

Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the appliance, values may vary.

5 EN

2 Warnings

Please read the		following		information.			Press “Start/Pause/Cancel”				butto
Otherwise,	there	may	be	the	risk	of	for 3 seconds to cancel the program
personal injury or material damage.							set in your machine before calling
Moreover,	any warranty			and	reliability		the authorized service.
commitment will become void.						First Use
General Safety
						•	To prepare		your	machine	for
• Never	place	your	machine		on	a	washing, carry out your first washing
carpet	covered	floor.		Otherwise,			process without loading your
lack of airflow from below your							machine and with detergent under
machine may cause electrical							“Cottons	90°C”		program.
parts to overheat. This may cause						•	Ensure	that	the	cold water
problems with your washing							connections has been made
machine.							correctly when installing your

•If the power cable or mains plug machineis .

damaged you must call Authorized

•

If the current

fuse

or

circuit

break

Service for repair.

is less than 15 Amperes, please

•

Check

water

hoses

for

wear.

Do have a qualified electrician install a

not use old/used water inlet hoses.

15 Ampere fuse or circuit breaker.

These may cause stains on your

•

To

make

your

machine

ready for

laundry.

use, please be sure that the tap

•

Fit

the

drain

hoseinto the waste

water supply and water drainage

water system securely

to prevent

systems are appropriate before

any water leakage and to allow

calling the authorized service. If they

machine to take in and discharge

are not, call a qualified plumber to

water as required. It is very

have any necessary arrangements

important that the water intake

carried out.

and drain hoses are not folded,

Intended use

squeezed, or broken when the

appliance is pushed into place after

•

This

product

has

been

designed

it is installed or cleaned.

designedhome use.

•

Your

washing

machine

is

may only

be

used

not to continue operating in the

•

The

appliance

washing and rinsing of textiles that

event

of

a

power

interruption.

Youare marked accordingly.

cannot cancel any program by

•

Only

detergents,

softeners

and

pressing

the

“On/Off

button.”

Yoursupplements suitable for washing

machine will not resume its program

machines may be used.

when

the

power

restores.

Press•

Observe

the

care

instructions

the

“Start/Pause/Cancel”

button

for

3 seconds to cancel the program

labelled on textile products and

any other instructions given by

(See,

Cancelling

a Program)

companies that produce detergents

•

There

may be

some

water

in

yourfor your machine.

machine when you receive it. This is

from the quality control process and

Safety instructions

is normal. It is not harmful to your

•

This

appliance

must

be

connected

machine.

•

problems

you

may

to an earthed outlet protected by a

Some

encounter

may be caused by the software.

fuse of suitable capacity.

•

The

supply and draining

hoses

6

EN

always be securely fastened and

Electrical connection

remain in an undamaged state.

•

Fit the

draining tohosea washbasin

Make

sure

that

you

have

an earthed

or waste system securely before

power outlet socket rated at 13 amps

starting up your machine. There may

(minimum).

be a risk of being scalded due to

Attention!

•

high washing temperatures!

If you use your machine as built-in,

Never

open

the

door

or remove

the

filter while there is still water in the

the socket must be reachable after

installation,

or

a separate

switch

(whi

drum.

Otherwise,

there

may

be

the

disconnect

the

two

poles)

must

risk of flooding and possible injury

can

used in the installation.

•

due to the hot water.

the

locked

Connect the power cord to the

Never

force

open

door!

The door will be ready to open just a

appropriate electrical socket with an

equivalent current rating indicated on the

few minutes after the washing cycle

rating plate at the front of the machine

•

comes to an end.

when

it

behind the kick plate.

Unplug

the

machine

is

not

use.

After removing the plug from its transit

•

wash

down

the

position, please insert the plug seal

Never

appliance

with a water hose! There is the risk

to prevent water spillage entering the

machine.

of electric shock! Always disconnect

from the mains by unplugging before

Electrical requirements

cleaning.

Before you insert the plug into the wall

•

Never

touch

the

plug

with

wetsocket make sure that the voltage and

hands. Never unplug by pulling

the frequency shown in the rating label

on the cable, always pull out from

corresponds to your electricity supply.

the plug only. Do not operate the

We recommend that this appliance be

machine if the power cord or plug is

connected to the mains supply via a

•

damaged.

to

repair

the

suitable switched and fused socket in a

Never

attempt

machine

yourself.

Otherwise,

you

may

readily accessible position.

be

putting yours and other’s lives in

Should the mains lead of the appliance

become damaged or need replacing

danger.

at any time, it must be replaced by a

•

For

malfunctions

that

cannot

special purpose made mains lead which

be solved by information in the

can only be obtained from a Authorised

operating

manual:

Service Agent.

Turn off the machine, unplug it, turn

off the water tap and contact an

B This appliance must be earthed

authorized service agent.

If there are children in your

If the fitted moulded plug is not suitable

for your socket, then the plug should be

house...

cut off and an appropriate plug fitted.

•

Electrical

appliances

may

be

Destroy the old plug, which is cut off as

dangerous

for

the

children.

a plug with a bared cord could cause a

Keep

children away from the machine

shock hazard if inserted into a socket

when it is operating. Do not let them

elsewhere in the house.

tamper with the machine.

The moulded plug on this appliance

•

Close

the

door

when

you

incorporates a 13A fuse. Should the fuse

leave

the

area where the machine is located.

need to be replaced an ASTA approved

•

Store

all

detergents

in

a

safe

BS1362 fuse of the same rating must

place

out of reach of the children.

be used. Do not forget to refit the fuse

7

EN

cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important
Fitting a different plug
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
proceed		as	follows:
1 Connect the green - yellow or green
	(earth)	wire to		the	terminal	in the
	plug marked ‘E’ or with the symbol
	f or coloured green and yellow or
	green.
2	Connect		the	blue	(neutral)	wire	to
	the terminal in the plug marked ‘N’
	or coloured black.
3	Connect		the	brown (live)		wire to		the

terminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

8 EN

3 Installation

Removing packaging reinforcement

Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

3. Fit	the	covers		(supplied			in	the	ba
with	the	Operation			Manual)			into	t
holes	on the			rear	panel.		(“P”)

C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

CNever move the appliance without the transportation safety bolts properly fixed in place!

Opening the transportation			Appropriate installation
locks			location
C Transportation safety bolts must			Install the appliance in environments
be removed before operating the			which have no risk of freezing, in a
washing	machine!	Otherwise,	thestable and level position.
machine will be damaged!			C	The floor must be capable of
				carrying the load on it!
1. Loosen all the bolts with a spanner			C	If the washing machine and a drier
until they	rotate	freely (“C”)		are placed on top of each other,
				their approximate weight together
				may reach 180 kg when they are
				full.
			Important:
			•	Do not place			the appliance		on	t
				the power cable.
			•	Keep	at	least	1cm	distance	from
				edges of other furniture.
			•	Place	the machine			on a firm surf
				do not position it on a long pile rug
2. Remove transportation safety bolts				or such like surfaces.
by turning them gently.			Adjusting the feet
			C	Do not use any tools to loosen the
				lock	nuts.	Otherwise,		they	can	be
				damaged.
			1.	Manually		(by	hand)	loosen	the	lo
				nuts on the feet.
		9	EN

Tighten the nuts of the hose well by

hand; never use wrenches to tigh the nuts.

2. Adjust them until the machine stands level and firm.

3. Important: Tighten all lock nuts up again.

Connecting to the water supply.

Important:

•

Open

the taps

completely

after

•

The

water

supply

pressure

requiredmaking the hose connection to

to run the machine must be 1-10

check if there is any water leakage

bar

(0,1

– 1

MPa).

(Practically,

it

isat the connection points. Turn off

necessary

to

have

10 –

80

liters

the tap and remove the nut in case

of water flowing from the tap in

of any leakage. Retighten the nut

one minute to have your machine

carefully after checking the seal.

run

smoothly.)

Attach

a

pressure-

To prevent any water leakage and

reducing valve if the water pressure

any other damage to be caused by

is higher.

it, keep the taps closed when the

•

Connect

the

special

hose

suppliedmachine is not in use.

with the machine to the water intake

•

Models

with

a

single

water

inlet

valves on the machine.

should not be connected to the

hot water tap. Laundry may be

damaged or the appliance may

switch to protection mode and not

work.

When returning the appliance to its

place after maintenance or cleaning,

care should be taken not to fold,

squeeze or block the hoses.

Connecting to the drain

The water discharge hose can be

•

In

order

to

prevent

water

attached to the edge of a washbasin

leakage

that may occur at the connection

or waste water system. The drain hose

should be firmly fitted into the drain as

points, there

are rubber

seals

(4

seals for the models with double

to not loosen in its housing.

water inlet and 2 seals for other

Important:

models)

attached

to

the

hoses. •

The

end

of

the

drain

hose

can

These seals should be used at the

be directly connected to the

tap and machine connection ends of

wastewater drain or to the

the hoses. The plain end of the hose

washbasin. The fitting must be

fitted with a filter must be attached

secured in all types of connections.

to the tap and the elbowed end

Your

house

may

be

flooded

if the

must be attached to the machine.

10

EN

hose falls out of its housing during	Electrical connection
water discharging.	Connect the machine to an earthed
• The hose should be attached	to	a
height of at least 40 cm, and 100	outlet protected by a fuse of suitable
	capacity.
cm at most.	Important:
	•	Connection		should		comply	with
		national regulations.
	•	Power	cord	plug	must be		within
		easy reach after installation.
	•	The	voltage	and	the	allowed fuse
		protection are specified in the
		section “Technical			Specifications”.
	•	The	specified	voltage		must	be e
		to your mains voltage.
	•	Connection		via	extension		cords
		multi-plugs should not be made.

B

A damaged power cable must be

•

In

case

the

hose

is

elevated

replaced by a qualified electrician.

B

The appliance must not be operated

after laying it on the floor level or

than

whilst faulty until it as been repaired!

close

to

the

ground

(less

There is the risk of electric shock!

40

cm

above

the

ground),

water

discharge becomes more difficult

Destroying the packaging

and the laundry may come out wet.

material

Therefore, the heights described in

Packaging

material

can be

dangerous

the figure should be followed.

•

refilling

children.

Keep

the

packaging

materia

To

prevent

dirty

water

the

machine, and to allow for easy

out of reach of children or dispose

them by classifying according to waste

discharge, the end of the hose

directives. Do not dispose of them

must not be submerged in the drain

together with normal domestic waste.

water. The end of the hose must be

Packaging materials of your machine are

able to take in air. The hose should

manufactured from recyclable materials.

be pushed into the drainage for

more than 15 cm. If it is too long

Disposing of the old machine

you may have it shortened.

•

The

end

of

the hose

should

Dispose of your old appliance in an

not

be

bent, it should not be stepped on

environmental friendly manner.

and it must not be folded between

•

You

may

refer

to your

local

agent

the drain and the machine.

solid waste collection center in your

•

The

length

of the

hose

is

too

municipality to learn how to dispose

short,

you may add an extension hose

of your machine.

to the original section. The length

Before disposing of your old washing

of the hose must not be longer

machine, cut off the mains plug and

than 3.2 m after coming out of the

make the door lock unusable.

machine. To avoid water leakage

failures, the connection between the

extension hose and the drain hose

of the product must be fitted well

with an appropriate clamp as not to

come off and leak.

11

EN