Asus P5KPL IPC/SI User Manual

P5KPL IPC/SI

Motherboard

E4595

First Edition V1 April 2009

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.

Contents

Notices .......................................................................................................... v

Safety information ...................................................................................... vi

About this guide ......................................................................................... vi

P5KPL IPC/SI specications summary ................................................... viii

Chapter 1: Product introduction

1.1 Before you proceed ..................................................................... 1-1

1.2 Motherboard overview .................................................................

1.2.1 Motherboard layout .........................................................

1.2.2 Layout contents ...............................................................

1.3 Central Processing Unit (CPU) ...................................................

1.4 System memory ...........................................................................

1.4.1 Overview .........................................................................

1.4.2 Memory congurations ....................................................

1.5 Expansion slots ............................................................................

1.5.1 Installing an expansion card ...........................................

1.5.2 Conguring an expansion card .......................................

1.5.3 PCI slots ..........................................................................

1.5.4 PCI Express x16 slot .......................................................

1.6 Jumpers ........................................................................................

1.7 Connectors .................................................................................

1.7.1 Rear panel connectors ...................................................

1.7.2 Internal connectors .......................................................

1.8 Software support ........................................................................

1.8.1 Installing an operating system ......................................

1.8.2 Support CD information ................................................

1-2

1-3

1-4

1-8

1-9

1-11

1-12

1-17

Chapter 2: BIOS information

2.1 Managing and updating your BIOS ............................................ 2-1

2.1.1 ASUS Update utility ........................................................

2.1.2 ASUS EZ Flash 2 utility ...................................................

2.1.3 ASUS CrashFree BIOS 3 utility ......................................

2.2 BIOS setup program ....................................................................

2.3 Main menu ....................................................................................

2.3.1 System Time ...................................................................

2.3.2 System Date ...................................................................

2-1

2-2

2-3

2-4

2-5

iii

Contents

2.3.3 Primary IDE Master/Slave, SATA1~4 .............................. 2-5

2.3.4 Storage Conguration .....................................................

2.3.5 System Information .........................................................

2.4 Advanced menu ...........................................................................

2.4.1 USB Conguration ..........................................................

2.4.2 CPU Conguration ..........................................................

2.4.3 Chipset ............................................................................

2.4.4 Onboard Devices Conguration ......................................

2.4.5 PCI PnP ..........................................................................

2.5 Power menu ................................................................................

2.5.1 Suspend Mode ..............................................................

2.5.2 ACPI 2.0 Support ..........................................................

2.5.3 ACPI APIC Support .......................................................

2.5.4 APM Conguration .........................................................

2.5.5 Hardware Monitor ..........................................................

2.6 Boot menu ..................................................................................

2.6.1 Boot Device Priority ......................................................

2.6.2 Boot Settings Conguration ..........................................

2.6.3 Security .........................................................................

2.7 Tools menu .................................................................................

2.7.1 ASUS EZ Flash 2 ..........................................................

2.7.2 AI NET 2

2.8 Exit menu ....................................................................................

........................................................................ 2-14

2-6

2-7

2-8

2-9

2-10

2-11

2-12

2-13

2-14

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required

to assure compliance with FCC regulations. Changes or modications to this unit not

expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://green.asus.com/english/REACH.htm.

DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

Safety information

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

•

When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

•

Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

•

Seek professional assistance before using an adpater or extension cord. These devices could interrupt the grounding circuit.

• Make sure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

•

If the power supply is broken, do not try to x it by yourself. Contact a qualied service

technician or your retailer.

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualied service

technician or your retailer.

About this guide

This user guide contains the information you need when installing and conguring the

motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new technology it supports.

• Chapter 2: BIOS information

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

Where to nd more information

Refer to the following sources for additional information and for product and software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty yers,

that may have been added by your dealer. These documents are not part of the standard package.

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to

complete a task.

CAUTION: Information to prevent damage to the components when trying to

complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key. Example: <Enter> means that you must press the Enter or Return key.

<Key1>+<Key2>+<Key3> If you must press two or more keys simultaneously, the key names are linked with a plus sign (+). Example: <Ctrl>+<Alt>+<D>

vii

P5KPL IPC/SI specications summary

CPU LGA775 socket for Intel® Core™2 Quad / Core™2

Extreme / Core™2 Duo / Pentium® Extreme processors Supports Intel® 45nm multi-core CPU Intel® Hyper-Threading Technology ready Supports Enhanced Intel SpeedStep® technology (EIST) * Ensure that you use a supported CPU, otherwise the system will show a warning message and automatically shut down. ** Refer to www.asus.com for Intel® CPU support list.

Chipset Northbridge: Intel® G31

Southbridge: Intel® ICH7

Front Side Bus 1333/1066/800 MHz

Memory Dual channel memory architecture

- 4 x 240-pin DIMM sockets support unbuffered non-ECC 800/667 MHz DDR2 memory modules

- Supports up to 4GB system memory * Refer to www.asus.com or this user manual for the Memory QVL (Qualied Vendors Lists). ** When you install a total memory of 4GB capacity or more, Windows® 32-bit operating system may only

recognize less than 3GB. We recommend a maximum

of 3GB system memory if you are using a Windows® 32-bit operating system.

Expansion slots 1 x PCI Express x16 slot

5 x PCI slots

Storage Southbridge Intel® ICH7 supports:

- 1 x UltraDMA 100/66 hard disk drive

- 4 x Serial ATA 300/150 ports

LAN PCIe Gigabit LAN

Audio VT1705 High Denition Audio 6-channel CODEC

- Supports Jack-detect technology

USB 8 x USB 2.0/1.1 ports (4 ports at mid-board, 4 ports

at back panel)

ASUS special features ASUS CrashFree BIOS 3

ASUS Q-Fan 2 ASUS EZ Flash 2 ASUS MyLogo™ 2 AI NET 2

viii

(continued on the next page)

P5KPL IPC/SI specications summary

Back panel I/O ports 1 x PS/2 keyboard port

Internal I/O Connectors 2 x USB 2.0/1.1 connectors supports additional

BIOS features 8Mb Flash ROM, AMI BIOS, PnP, DMI v2.0, WfM 2.0, ACPI

Support CD Contents Drivers

Accessories 1 x Serial ATA cable

Form factor ATX form factor: 12 in x 8 in (30.5 cm x 20.3 cm)

1 x PS/2 mouse port 1 x COM port 1 x VGA port

1 x LPT port (optional) 1 x LAN (RJ-45) port 4 x USB 2.0/1.1 ports 6-channel audio I/O ports

4 USB 2.0/1.1 ports 1 x High denition front panel audio connector 1 x IDE connector 4 x SATA connectors 1 x System panel connector 1 x CPU fan connector 1 x Chassis fan connector 1 x Power fan connector 1 x Chassis intrusion connector 1 x COM connector 1 x 24-pin EATX power connector 1 x 4-pin ATX 12V power connector

v2.0a, SM BIOS v2.5

ASUS PC Probe II ASUS LiveUpdate Utility Anti-virus software (OEM version)

1 x UltraDMA 100/66 cable 1 x I/O shield User Manual

*Specications are subject to change without notice.

Chapter 1 Product introduction

Thank you for buying an ASUS® P5KPL IPC/SI motherboard! Before you start installing the motherboard, and hardware devices on it, check the items in

your motherboard package. Refer to page ix for the list of accessories.

If any of the items is damaged or missing, contact your retailer.

1.1 Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

• Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

Onboard LED

The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you must shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED.

ASUS P5KPL IPC/SI 1-1

1.2 Motherboard overview

1.2.1 Motherboard layout

Ensure that you install the motherboard into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis.

Place this side towards the rear of the chassis.

Place six screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.

1-2 Chapter 1: Product introduction

1.2.2 Layout contents

Connectors/Jumpers/Slots/LED Page Connectors/Jumpers/Slots/LED Page

1. Keyboard power (3-pin KBPWR) 1-10 9.

ATX power connectors (24-pin EATXPWR, 4-pin

2. ATX12V)

CPU, power, and chassis fan connectors (4-pin

3. CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN)

4. LGA775 CPU socket 1-3 12.

5. DDR2 DIMM slots 1-4 13.

6. Serial ATA connectors (7-pin SATA1-4) 1-15 14. Serial port connector (10-1 pin COM2) 1-13

7. IDE connector (40-1 pin PRI_IDE) 1-13 15.

8. Onboard LED (SB_PWR) 1-1 16. PCI / PCIe x 16 slots 1-8

1-14 10.

1-12 11. Clear RTC RAM (3-pin CLRTC) 1-9

System panel connector (10-1 pin F_PANEL)

Chassis intrusion connector (4-1 pin CHASSIS)

USB connectors (10-1 pin USB56 and USB78)

USB device wake-up (3-pin USBPW1-4, 3-pin USBPW5-8)

Front panel audio connector (10-1 pin AAFP)

1.3 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA775 socket designed for the Intel® Core™2 Quad / Core™2 Extreme / Core™2 Duo / Pentium® Extreme processors.

• Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/transit-related.

• Keep the cap after installing the motherboard. ASUS will process Return Merchandise

Authorization (RMA) requests only if the motherboard comes with the cap on the

LGA775 socket.

• The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.

1-16

1-14

1-12

1-10

1-15

The motherboard supports Intel® LGA775 processors with the Intel® Enhanced Intel SpeedStep® Technology (EIST) and Hyper-Threading Technology.

ASUS P5KPL IPC/SI 1-3

+ 28 hidden pages