Apple A1354 User Manual
AirPort Extreme
Setup Guide
8
8
11
16
18
23
23
25
26
Contents
5 Chapter 1: Getting Started
6 About the AirPort Extreme
About the AirPort Software
What You Need to Get Started
The AirPort Extreme Status Light
13 Chapter 2: AirPort Extreme Networks
14 Using the AirPort Extreme with a Broadband Internet Service
Using the AirPort Extreme to Share a USB Printer
Using the AirPort Extreme to Share USB Hard Disks
21 Chapter 3: Setting Up the AirPort Extreme
21 Using AirPort Utility
Creating a New Wireless Network
Configuring and Sharing Internet Access
Setting Advanced Options
Allowing Wireless Clients Access to Your Network
27 Chapter 4: Tips and Troubleshooting
27 If You Can’t Connect to the Internet
3
4
27
28
29
30
31
31
32
If You Forgot Your Network or Base Station Password
If Your AirPort Extreme Isn’t Responding
If Your AirPort Extreme Status Light Flashes Amber
If Your Printer Isn’t Responding
Updating AirPort Software
AirPort Extreme Placement Considerations
Items That Can Cause Interference with AirPort
33 Chapter 5: Learning More, Service, and Support
35 Appendix: AirPort Extreme Specifications and Safety Guidelines
38 Regulatory Compliance Information
Contents
1
Getting Started
1
Congratulations on purchasing your simultaneous dual-band
AirPort Extreme Base Station. Read this guide to get started.
The new AirPort Extreme provides simultaneous dual-band wireless 802.11n
networking. When you set up your AirPort Extreme Base Station, it creates two highspeed Wi-Fi networks:
 A 2.4 gigahertz (GHz) network for 802.11b, 802.11g, and 802.11n devices, such as
iPhone, iPod touch, and older computers
 A 5 GHz network for 802.11n and 802.11a devices, such as newer computers and
Apple TV
Wireless devices join the network that provides them the best performance and
compatibility, and the AirPort Extreme shares your broadband Internet connection with
computers and devices on your network.
With your AirPort Extreme, you can:
 Create a password-protected wireless home network, and then connect to the
Internet and share the connection with other computers and Wi-Fi devices, such as
iPhone, iPod touch, and Apple TV. You can also share files among computers
connected to the network.
5
 Create a guest network with or without password protection, to provide Internet-
only access to wireless devices, such as computers, iPhone, iPod touch, and Apple TV.
 Connect your AirPort Extreme to your Ethernet network. Wireless-equipped
Macintosh computers, Windows XP, or Windows Vista computers can then have
access to an entire network without being connected by a cable.
 Connect a supported USB device, such as a printer or a scanner to your
AirPort Extreme. All of the compatible computers on the AirPort network, both
wireless and wired, can access the device.
 Connect a USB hard disk to your AirPort Extreme. All of the compatible computers on
the AirPort network, both wireless and wired, can access the information on the hard
disk.
 Connect a USB hub to your AirPort Extreme, and then connect multiple USB devices,
such as printers or hard disks. All of the computers on the network have access to
those devices.
Important: Install AirPort Utility from the CD that came with your simultaneous dual-
band AirPort Extreme Base Station, or download it using Software Update, and use it to
set up your base station. Previous versions of AirPort Setup Assistant and AirPort Admin
Utility are not compatible with this base station.
About the AirPort Extreme
The AirPort Extreme has five ports, located on the back:
 One 10/100/1000Base-T Gigabit Ethernet Wide Area Network (WAN) port (< ) for
connecting a DSL or cable modem, or for connecting to an existing Ethernet network
6 Chapter 1 Getting Started
 Three 10/100/1000Base-T Gigabit Ethernet Local Area Network (LAN) ports (G ) for
connecting Ethernet devices, such as printers or computers, or for connecting to an
existing Ethernet network
 One USB port (d ) for connecting a compatible USB printer, hard disk, or hub for
connecting several devices
Status light Internet WAN port
Ethernet ports Reset button
Power port USB port
AC adapter
Security slot
Next to the ports is a reset button, which is used for troubleshooting your
AirPort Extreme. The status light on the front of the AirPort Extreme shows the
current status.
Chapter 1 Getting Started 7
About the AirPort Software
The AirPort Extreme works with the AirPort software included on the AirPort Extreme
CD.
Install the AirPort Utility software that came on the CD and follow the instructions on
the following pages to set up your AirPort Extreme and your AirPort wireless network.
Note: You must use AirPort Utility to set up this base station. The simultaneous
dual-band AirPort Extreme Base Station is not compatible with previous versions
of AirPort software.
AirPort Utility
Use AirPort Utility to set up your AirPort Extreme to create a wireless network,
connect to the Internet, and share compatible USB printers and hard disks. You can
also connect your AirPort Extreme to an existing AirPort Extreme wireless network.
AirPort Utility is also an advanced tool for setting up and managing the Time
Capsule, AirPort Extreme, and AirPort Express Base Stations. Use it to manually adjust
network, routing, and security settings and other advanced options.
Z
AirPort status menu in the menu bar
Use the AirPort status menu to switch quickly between AirPort networks, monitor the
signal quality of the current network, create a computer-to-computer network, and
turn AirPort on and off. The status menu is available on computers using Mac OS X.
What You Need to Get Started
To use the AirPort Extreme you need a wireless-enabled computer that is compliant
with the IEEE 802.11a, 802.11b, or 802.11g standards, or with an IEEE 802.11n draft
specification. To set up the AirPort Extreme, your computer must meet the
requirements listed below.
8 Chapter 1 Getting Started
To set up your AirPort Extreme using a Macintosh, you need the following:
 A Macintosh computer with an AirPort or AirPort Extreme Card installed to set it up
wirelessly, or a Macintosh computer connected to AirPort Extreme with an Ethernet
cable to set it up using Ethernet
 Mac OS X v10.4 or later
 AirPort Utility 5.4 or later
To set up your AirPort Extreme using a Windows PC, you need the following:
 A Windows PC with 300 MHz or higher processor speed and a compatible 802.11a,
802.11b, 802.11g, or 802.11n wireless card to set it up wirelessly, or a Windows
computer connected to AirPort Extreme with an Ethernet cable to set it up using
Ethernet
 Windows XP Home or Professional (with Service Pack 2 installed) or Windows Vista
 AirPort Utility v5.5 or later
Plugging In AirPort Extreme
Before you plug in your AirPort Extreme, first connect the appropriate cables to the
ports you want to use:
 Connect the Ethernet cable that is connected to your DSL or cable modem (if you will
connect to the Internet) to the Ethernet (WAN) port (< ).
 Connect a USB cable connected from the USB port (d ) on the AirPort Extreme to a
compatible USB printer (if you will print to a USB printer), a hard disk, or a hub.
 Connect an Ethernet cable from any Ethernet device to the Ethernet LAN ports (G ).
Chapter 1 Getting Started 9
After you have connected the cables for all the devices you plan to use, connect the AC
adapter to the power port, and plug your AirPort Extreme into a power outlet. There is
no power switch.
Power port Ethernet activity light
AC adapter
Important: Use only the AC adapter that came with your AirPort Extreme.
When you plug the AirPort Extreme AC adapter into a power outlet, the status light
flashes green for one second, and then glows amber while it starts up. After it has
started up completely, the status light flashes amber until your AirPort Extreme has
been updated with the correct settings. The status light glows solid green after your
AirPort Extreme is properly set up and connected to the Internet or a network.
10 Chapter 1 Getting Started
When you connect Ethernet cables to the Ethernet ports, the lights above them glow
solid green.
The AirPort Extreme Status Light
The following table explains the AirPort Extreme light sequences and what they
indicate.
Light
Off
Flashing green
Solid green
Flashing amber
Solid amber
Flashing amber and green There may be a problem starting up. AirPort Extreme will restart
Solid blue
Status/description
AirPort Extreme is unplugged.
AirPort Extreme is starting up. The light flashes for one second.
AirPort Extreme is on and working properly. If you choose Flash
On Activity from the Status Light pop-up menu (on the Base
Station pane of AirPort settings in AirPort Utility), the status light
may flash green to indicate normal activity.
AirPort Extreme cannot establish a connection to the network or
the Internet, or is encountering a problem. Make sure you have
installed AirPort Utility and use it to get information about what
might cause the status light to flash amber. See “If Your
AirPort Extreme Status Light Flashes Amber” on page 29.
AirPort Extreme is completing its startup sequence.
and try again.
The base station is ready to allow a wireless client access to the
network. See “Allowing Wireless Clients Access to Your Network”
on page 26.
Chapter 1 Getting Started 11
What’s Next
After you plug in your AirPort Extreme, use AirPort Utility to set it up to work with your
Internet connection, USB printer or hard disk, or an existing network. AirPort Utility
is located in the Utilities folder in the Applications folder on a computer using
Mac OS X, and in Start > All Programs > AirPort on a computer using Windows XP
or Windows Vista.
12 Chapter 1 Getting Started
2
AirPort Extreme Networks
2
In this chapter you’ll find explanations of the different ways
you can use your AirPort Extreme.
This chapter provides some examples of the different kinds of networks you can set up
using your AirPort Extreme. It provides diagrams and explanations of what you need to
do to get your AirPort Extreme network up and running quickly.
See Chapter 3, “Setting Up the AirPort Extreme,” on page 21 to find out more about
using AirPort Utility to help set up your network.
See the document “Apple AirPort Networks” for detailed information about AirPort
networks and the AirPort Extreme. The document is located at www.apple.com/
support/manuals/airport.
13
Using the AirPort Extreme with a Broadband Internet Service
When you set up your AirPort Extreme to provide network and Internet access,
Macintosh computers with AirPort and AirPort Extreme Cards, and 802.11a, 802.11b,
802.11g, and IEEE 802.11n draft specification wireless-equipped computers, can access
the wireless AirPort network to share files, play games, and use Internet applications
like web browsers and email applications.
It looks like this:
DSL or cable modem
14 Chapter 2 AirPort Extreme Networks
2.4 or 5 GHz
Internet WAN port
<
2.4 GHz
to Internet
Loading...