Automatic Transfer Switch
Overview
The American Power Conversion (APC®) Rack Automatic Transfer Switch (ATS) provides reliable, redundant power to single-corded equipment. The Rack ATS has dual input power cords supplying power to the connected load. If the primary source becomes unavailable, the Rack ATS will seamlessly source power from the secondary source without interrupting critical loads. Networked units have built-in network connectivity, which allows for remote management via Web, SNMP, or Telnet interfaces.
Rear view—AP7721
|
Item |
Description/Function |
|
|
|
|
Power inlets |
The two (2) C14 inlets support the connection of two |
|
|
power cords (not provided) to link the ATS to two |
|
|
separate power sources (A, B). The switch draws power |
|
|
from the preferred source and automatically switches to |
|
|
the secondary source when necessary. |
|
|
|
|
Outlets |
The outlets connect the ATS to equipment in the rack or |
|
|
enclosure, providing a redundant source of power to the |
|
|
connected equipment. Each switch has twelve (12) C13 |
|
|
outlets. |
|
|
|