user manual
Hob
EHB30100
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information |
2 |
Care and cleaning |
7 |
Installation |
3 |
What to do if… |
8 |
Product description |
5 |
Technical data |
9 |
Operation |
6 |
Environment concerns |
9 |
Helpful hints and tips |
6 |
Service and Guarantee in Taiwan |
9 |
Subject to change without notice
SAFETY INFORMATION
For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance.
General safety
Warning! Persons (including children) with reduced physical sensory, mental capabilities or lack of experience and knowledge must not use the appliance. They must have supervision or instruction for the operation of the appliance by a person responsible for their safety.
The appliance is not intended to be operated with external timer or separated remote-control system.
Child safety
•Only adults can use this appliance. Children must get supervision to make sure that they do not play with the appliance.
•Keep all packaging away from children. There is a risk of suffocation and physical injury.
•Keep children away from the appliance during and after the operation, until the appliance is cold.
Safety during operation
•Remove all packaging, stickers and layers from the appliance before the first use.
•Set the cooking zones to "off" after each use.
•Risk of burns! Do not put cutlery or saucepan lids on the cooking surface, as they can become hot.
Warning! Fire danger! Overheated fats and oils can ignite very quickly.
Correct operation
•Do not leave the appliance unattended during operation.
•Always monitor the appliance during operation.
•Do not let the liquids overflow into the holes of the top of the hob
•Never use the hob without cookware.
•Only use the appliance for domestic cooking tasks! Do not use it for commercial or industrial purposes or for any purpose other than that for which it was designed. This way, you will avoid risk to person or property.
•Use only cookware with bottom diameter applicable to the dimensions of burners.
•Pots must not enter the control zone.
•Do not use the appliance as a work or a storage surface.
•Never use unstable cookware to prevent from tilt and accident.
•Do not put or keep flammable liquids (or items that are wet with flammable products) and materials, or fusible objects (made of plastic or aluminium) on or near the appliance. Risk of explosion or fire.
•Use only the accessories delivered with appliance.
•Be careful when you connect the appliance to the near sockets. Do not let electricity bonds touch the appliance or hot cookware. Do not let electricity bonds tangle.
How to prevent a damage to the appliance
•Do not let acid liquids such as vinegar, lemon juice or limescale removing agents to touch the hob. This will cause matt patches
•Do not place wet pan lids on the hotplates and do not let hot pans to cool on the hotplates. If not condensation and rust can form.
•Do not let cookware boil dry to prevent the damage to cookware and hotplate.
•Do not use the solid hotplate with empty cookware or without cookware.
electrolux 3
•Do not cover any part of the appliance with aluminium foil.
Disposal of the appliance
•To prevent the risk of physical injury or damage
–Disconnect the appliance from the power supply.
–Cut off the mains cable where it connects with the appliance and discard it.
–Speak to your local authorised facilities for disposal of your appliance.
INSTALLATION
Installation
Warning! Read and follow the instructions carefully. There is a risk of injury or damage to the appliance.
•Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier.
•Installation and connection of the appliance to the power supply must only be done by qualified personnel.
•Only use built-in appliances after you assemble the appliance into correct built-in units and work surfaces that obey the standards.
•Do not change the specifications or modify this product. There is a risk of injury or damage to the appliance.
•Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety regulations, recycling regulations, electrical safety rules etc.).
•Keep the minimum distances to other appliances and units.
•Install anti-shock protection, for example install the drawers only with a protective panel directly below the appliance.
•Prevent damage of the cut surfaces of the worktop against moisture with a correct sealant!
•Seal the appliance to the worktop with no space left with a correct sealant.
•Prevent damage of the bottom of the appliance from steam and moisture, e.g. from a dishwasher or oven.
•Do not install the appliance adjacent to doors and below windows. Hot cookware can be hit off the hob when you open doors or windows.
•Disconnect the appliance from the electrical supply, before you do maintenance work or cleaning.
Warning! Risk of injury from electrical current. Carefully obey the instructions for electrical connections.
•The electrical mains terminal is live.
•Make the electrical mains terminal free of voltage.
•Install correctly to give anti-shock protection.
•Loose and incorrect mains plug and socket connections can make the terminal become too hot.
•A qualified electrician must install the clamping connections correctly.
•Use a strain relief clamp on cable.
•Use the correct mains connection cable and replace the damaged mains cable with the proper cable type. Speak to your local Service Centre.
The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm. You must have correct isolation devices: line protecting cut-outs, fuses (screw type
4 electrolux
fuses removed from the holder), ground leakage trips and contactors.
The manufacturer is not responsible for any injury to persons and pets or damage to property caused by failure to obey these requirements.
Electrical connection
•Ground the appliance according to safety precautions.
•Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply.
•This appliance is supplied with a mains cable. It has to be supplied with a correct plug, able to support the load marked on the rating plate. The plug has to be fitted in a correct socket.
•Any electrical component must be installed or replaced by the Service Force Centre technician or qualified service personnel.
•Always use a correctly installed shockproof socket.
•Make sure that there is an access to the mains plug after installation.
•Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
•The appliance must not be connected with an extension cable, an adapter or a multiple connection (risk of fire). Check that the ground connection is in conformity with the standard and regulations force.
•The power cable must be placed in such a way that it does not touch any hot part.
•Connect the appliance to the mains with a device that lets to disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm, eg. automatic line protecting cutout, earth leakage trips or fuse.
•None of a parts of the connection cable can not get a temperature 90 °C. The blue neutral cable must be connected to the terminal block label with "N". The brown (or black) phase cable (fitted in the terminal block contact marked with "L") must always be connected to the live phase.
Replacement of the connection cable
To replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure that the cable section is applicable to the voltage and the working temperature. The yellow/green earth wire must be approximately 2 cm longer than the brown (or black) phase wire.
Assembly
min. 650 mm |
|
min. 100 mm |
|
40-50 mm |
490 mm |
||
|
|||
|
|
||
55 mm |
|
|
|
|
30 mm |
270 mm |
|
|
|
If several 30 cm hobs are to be installed side by side into the same cut out, an assembly kit including a support side bracket and supplementary seals is available at our Service Centres. The relevant installation instructions are supplied within the kit package.
A
B
A — supplied seal
B — supplied brackets
Possibilities for insertion Kitchen unit with door
The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary.
Loading...