Installation Guide
Viking Range, LLC
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information, call 1-888-(845-4641)
or visit the Viking Web site at vikingrange.com
Custom Panel
All Refrigerator/All Freezer
F21344 EN |
(123113) |
Table of Contents
Warnings & Important Information ____________________________________________________________________3 All Refrigerator/Freezer
Dimensions & Specifications (30” and 36”) ____________________________________________________6 Cutout Dimensions (30”) ____________________________________________________________________8 Anti-Tip Dimensions (30”) ___________________________________________________________________9 Cutout Dimensions (36”) ___________________________________________________________________10 Anti-Tip Dimensions (36”) __________________________________________________________________11 Dimensions (Dual 30”) _____________________________________________________________________12 Dimensions (Dual 30” and 36”) _____________________________________________________________13 Dimensions (Dual 36”) _____________________________________________________________________14 Specifications (Dual) _______________________________________________________________________15 Cutout Dimensions (Dual 30”) ______________________________________________________________16 Anti-Tip Dimensions (Dual 30”) _____________________________________________________________17 Cutout Dimensions (Dual 30” and 36”) ______________________________________________________18 Anti-Tip Dimensions (Dual 30” and 36”) _____________________________________________________19 Cutout Dimensions (Dual 36”) ______________________________________________________________20 Anti-Tip Dimensions (Dual 36”) _____________________________________________________________21 Overlay Dimensions (30” & 36”) ____________________________________________________________22 Custom Grille Dimensions (30”) _____________________________________________________________23 Custom Grille Dimensions (36”) _____________________________________________________________24 Custom Grille Dimensions (Dual 30”) ________________________________________________________25 Custom Grille Dimensions (Dual 30” and 36”) ________________________________________________26 Custom Grille Dimensions (Dual 36”) ________________________________________________________27
Cabinet Information _______________________________________________________________________________28 Custom Side Panel Dimensions _____________________________________________________________________30 Custom Panel General Information __________________________________________________________________31 Custom Door Panel Installation ____________________________________________________________________ 32 Custom Grille Installation ___________________________________________________________________________34 General Information _______________________________________________________________________________36
Unpacking & Moving ______________________________________________________________________38 Installation ________________________________________________________________________________________39 Hinge Adjustment_________________________________________________________________________39 Kickplate Installation_______________________________________________________________________42 Door Stop Adjustment_____________________________________________________________________42 Final Installation __________________________________________________________________________43
Performance Checklist _____________________________________________________________________________44 Control Panels ____________________________________________________________________________________45 Service & Registration______________________________________________________________________________46
IMPORTANT — Please Read and Follow
•Make sure that incoming voltage is the same as unit rating. An electric rating plate specifying voltage, frequency, wattage, amperage, and phase is attached to the product.
•To reduce the risk of fire, electrical shock, or injury to persons, installation work and electrical wiring must be done by a qualified technician in accordance with all applicable codes and standards, including fire-rated construction.
•The installer should leave these instructions with the consumer who should retain them for local inspector’s use and for future reference.
It is your responsibility to:
•Comply with installation specifications and dimensions.
•Properly install unit.
•Remove any moldings or decorative panels that prevent the unit from being serviced.
•Make sure that you have these materials (not provided with your unit), which are necessary for proper installation:
•1/4” (6 mm) copper tubing with shutoff valve
•6 – #8 x 3” (7.6 cm) wood screws (longer screws may be required)
•1– Saddle valve (DO NOT use self-piercing feature of the valve)
•Assure that floor will support unit, door panels and contents (approximately 1200 pounds [540 kg]).
•Provide a properly grounded electrical outlet.
•Assure that location will permit appliance doors to open a minimum of 90˚.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. ALWAYS read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word “DANGER” or “WARNING.”
These words mean:
DANGER
Hazards or unsafe practices which WILL result in severe personal
injury or death
WARNING
Hazards or unsafe practices which COULD result in severe personal
injury or death
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
2 |
3 |
IMPORTANT–Please Read and Follow!
A GFI shall be used if required by NFPA-70 (National Electric Code), federal/state/local laws, or local ordinances.
•The required use of a GFI is normally related to the location of a receptacle with respect to any significant sources of water or moisture.
•Viking Range, LLC will NOT warranty any problems resulting from GFI outlets which are not installed properly or do not meet the requirements below.
If the use of a GFI is required, it should be:
•Of the receptacle type (breaker type or portable type NOT recommended)
•Used with permanent wiring only (temporary or portable wiring NOT recommended)
•On a dedicated circuit (no other receptacles, switches or loads in the circuit)
•Connected to a standard breaker of appropriate size (GFI breaker of the same size NOT recommended)
•Rated for Class A (5 mA +/- 1 mA trip current) as per UL 943 standard)
•In good condition and free from any loose-fitting gaskets (if applicable in outdoor situations)
•Protected from moisture (water, steam, high humidity) as much as reasonably possible
WARNING
TIP OVER HAZARD
Appliance is top heavy and tips easily when not completely installed. Keep
doors closed until appliance is completely installed and secured per installation instructions.
Use two or more people to move and install appliance. Failure to do so can result in death or serious injury.
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power or turn power disconnect switch to
OFF position before removing top grille. Failure to do so can result in death or electric shock.
Most of the unit’s weight is at the top. Extra care is needed when moving the unit to prevent tipping. Use cardboard shipping material or plywood under unit until it is installed in the operating position to protect floor surface.
4 |
5 |
Dimensions
30” All Refrigerator/Freezer
3- |
|
(8.1/2” |
|
9 |
cm) |
|
75- |
|
15/16”9 |
|
(192. |
cm) |
|
30” |
|
(76. |
|
2 |
cm) |
|
|
varies |
|
hardware) |
Measurement |
|
d |
|
supplie |
|
(locally |
|
29” |
|
(73. |
|
7 |
cm) |
|
36” All Refrigerator/Freezer
|
|
|
|
|
|
|
35” |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
(88. |
|
|
|
|
|
|
|
|
9 |
cm) |
|
3- |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(8.1/2” |
|
36” |
|
|||||
|
|
|||||||
9 |
cm) |
|
|
(91. |
|
|
|
|
|
|
|
5 |
cm) |
|
|||
|
|
|
|
|
|
|
82- |
|
(210.7/8” |
|
5 |
cm) |
|
|
min. |
|
to |
|
84- |
|
(213.1/16” |
|
5 |
cm) |
|
|
max. |
75- |
|
15/16”9 |
|
(192. |
cm) |
|
varies Measurementsupplied hardware) (locally
|
-13/16” |
|||
23 |
|
.4 |
cm) |
|
(60 |
|
|||
|
|
|
||
24 |
-3/4” |
|||
.9 |
cm) |
|||
(62 |
|
|
||
|
|
|
|
|
-13/16” |
|||
23 |
|
.4 |
cm) |
|
(60 |
|
|||
|
|
|
||
24 |
-3/4” |
|||
.9 |
cm) |
|||
(62 |
|
|
||
|
|
|
|
82- |
|
|
(210.7/8” |
||
|
5 |
cm) |
|
|
|
min. |
||
84- |
to |
|
15/16” |
||
(213. |
cm) |
|
max. |
Specifications
30” All Refrigerator/Freezer
Description |
FDFB |
FDRB |
|
Overall width |
30” (76.2 cm) |
|
|
Overall height (from bottom) |
82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max. |
||
Overall depth (from rear) |
To front edge of side trim: 23-13/16” (60.5 cm) |
||
|
To front of top grille: 24-3/4” (62.9 cm) |
||
|
To front edge of door trim: 24” (61.0 cm) |
||
Cutout width |
30” (76.2 cm) |
|
|
Cutout height |
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max. |
||
Cutout depth |
24” (61.0 cm) min.* |
||
Electrical requirements |
115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with |
||
|
grounded 3-prong plug attached to product |
||
Maximum amp usage |
9.1 amps |
|
5.7 amps |
Inlet water requirements |
1/4” copper tubing inlet |
|
|
|
waterline; minimum 20 psi; |
|
N/A |
|
maximum 120 psi |
|
|
Overall interior dimensions |
|
|
|
total capacity |
15.9 cu. ft. (450 liters) |
|
18.4 cu. ft. (522 liters) |
Maximum panel weight |
50 lbs. (22.7 kg) |
|
|
Approximate shipping weight |
445 lbs. (200.2 kg) |
||
|
|
|
|
36” All Refrigerator/Freezer
Description |
FDFB |
FDRB |
Overall width |
36” (91.5 cm) |
|
Overall height (from bottom) |
82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max. |
|
Overall depth (from rear) |
To front edge of side trim: 23-13/16” (60.5 cm) |
|
|
To front of top grille: 24-3/4” (62.9 cm) |
|
|
To front edge of door trim: 24” (61.0 cm) |
|
Cutout width |
36” (91.5 cm) |
|
Cutout height |
82-7/8” (210.5 cm) min. to |
84-1/16” (213.5 cm) max. |
Cutout depth |
24” (61.0 cm) min.* |
|
Electrical requirements |
115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with |
|
|
grounded 3-prong plug attached to product |
|
Maximum amp usage |
9.5 amps |
6.5 amps |
Inlet water requirements |
1/4” copper tubing inlet |
|
|
waterline; minimum 20 psi; |
N/A |
|
maximum 120 psi |
|
Overall interior dimensions |
|
|
total capacity |
19.2 cu. ft. (544 liters) |
22.8 cu. ft. (646 liters) |
Maximum panel weight |
60 lbs. (27.2 kg) |
|
Approximate shipping weight |
520 lbs. (234 kg) |
|
|
|
|
*Note: Custom panel models fit flush in 25” (63.5 cm) deep cabinet openings. They can be installed in standard 24” (61.0 cm) deep openings. The door faces and top grille will protrude 3/4” (1.9 cm) into the room.
6 |
7 |
Cutout Dimensions
30” All Refrigerator/Freezer
24” |
|
(61 |
.0 cm) |
|
See anti-tip board installation
9” (22.9 cm)
Electric Outlet Location
6” |
|
(15.2 |
cm) |
|
9” |
|
(22.9 |
cm) |
|
82- |
7/8” |
|
|
|||||
(210.5 |
|
|
|
|||||
cm) |
|
|
|
|||||
anti- |
|
|
min |
|
||||
tip |
|
|
. |
|||||
|
|
|
|
board |
& |
|||
opening |
|
|
||||||
|
|
|
|
|
height |
|||
84- |
1/16” |
|
|
|||||
(213. |
5 |
|
|
|||||
anti- |
|
cm) |
max. |
|||||
|
|
|||||||
tip |
|
|
||||||
|
|
|
|
board |
& |
|||
opening |
|
|
||||||
|
|
|
|
|
height |
73-3/8” (186.4 cm)
Water Line Entry Area
Note: Shown for All Freezer only.
(76. |
3 |
|
|
0” |
|
2 |
cm) |
|
|
|
5/8” |
|
(1. |
|
5 |
cm) |
|
3- |
|
2 |
5/8” |
(9. |
cm) |
|
7- |
|
|
5/8” |
||
(19. |
|
|
|
4 |
cm) |
|
|
|
3” |
|
|
(7. |
|
|
6 |
cm) |
|
|
30” |
||
(76. |
|
|
2 |
cm) |
|
|
|
|
6- |
|
|
3/4” |
||
(17. |
|
|
1 |
cm) |
|
|
5/8” |
|
(1. |
|
5 |
cm) |
|
10- |
10- |
|
|
|
(27. |
3/4” |
(26. 1/2” |
(1. 5/8” |
|
3 |
7cm) |
|||
|
cm) |
|
5 |
cm) |
Optional floor water line entry
1” (2.5 cm)
Anti-Tip Dimensions
30” All Refrigerator/Freezer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
79- |
|
|
|
|
|||||
|
|
|
|
||||||
(201.6 |
3/8” |
||||||||
cm) |
|
|
|||||||
to |
|
|
|
|
min. |
||||
bottom |
|||||||||
|
of |
||||||||
anti- |
tip |
|
|||||||
|
|
|
|
|
|
board |
|||
|
|
|
|
|
|
||||
80- |
|
|
|
|
|||||
|
|
|
|
||||||
(204.6 |
1/2” |
||||||||
cm) |
|
|
|||||||
to |
|
|
|
max. |
|||||
|
|
|
|
|
|
||||
|
bottom |
of |
|||||||
anti- |
tip |
|
|||||||
|
|
|
|
|
|
board |
|||
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Anti-Tip Location
1-1/2” |
||
(3 |
.8 |
cm) |
|
||
|
|
23” |
|
(58.4 |
cm) |
|
3- |
|
1/2” |
|
(8. |
|
9 |
cm) |
|
One 2”x4” mounting boardOne 2”x1-1/2”4” mounting(3.8 cm) xboard3-1/2” (8.9 cm)
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim behind
Note: If unit is installed deeper than 24” (61.0 cm), then shim the mounting board by the difference.
behind the mounting boards by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below the opening height.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly under anti-tip board.
Note: Top of unit must be placed firmly under anti-tip board.
8 |
9 |
Cutout Dimensions
24” |
|
36” All Refrigerator/Freezer |
|
|
||||
See |
anti-tip |
|
|
|
|
|||
(61. |
0 |
cm) |
board |
Electric Outlet Location |
||||
|
|
|||||||
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
installation |
6” |
|
|
|
|
|
|
|
|
(15.2 |
cm) |
|
|
|
|
|
|
9” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(22. |
|
|
|
|
|
|
|
|
9 cm) |
|
9” |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
(22.9 |
cm) |
|
|
|
|
|
|
|
|
82- |
7/8” |
|
|
|||||
(210.5 |
|
|
|
|||||
cm) |
|
|
|
|||||
anti- |
|
|
min |
|
||||
tip |
|
|
. |
|||||
|
|
|
|
board |
& |
|||
opening |
|
|
||||||
|
|
|
|
|
height |
|||
84- |
1/16” |
|
|
|||||
(213. |
5 |
|
|
|||||
anti- |
|
cm) |
max. |
|||||
|
|
|||||||
tip |
|
|
||||||
|
|
|
|
board |
& |
|||
opening |
|
|
||||||
|
|
|
|
|
height |
73-3/8” (186.4 cm)
Water Line Entry Area
Note: Shown for All Freezer only.
(91. |
3 |
|
|
6” |
|
5 |
cm) |
|
|
|
5/8” |
|
(1. |
|
5 |
cm) |
|
3- |
|
2 |
5/8” |
(9. |
cm) |
7- |
|
|
5/8” |
||
(19. |
|
|
|
4 |
cm) |
|
|
|
3” |
|
|
(7. |
|
|
6 |
cm) |
|
|
36” |
||
(91. |
|
|
5 |
cm) |
|
|
|
|
6- |
|
|
3/4” |
||
(17. |
|
|
1 |
cm) |
|
|
5/8” |
|
(1. |
|
5 |
cm) |
|
10- |
10- |
|
||
(27. |
3/4” |
(26. |
1/2” |
|
3 |
7 |
cm) |
|
|
|
cm) |
|
|
|
|
|
|
(1. 5/8” |
|
|
|
|
5 |
cm) |
|
|
|
|
Optional floor water line entry
1” (2.5 cm)
Anti-Tip Dimensions
|
|
79- |
|
|
|
|
||||
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|||||
|
|
|
||||||||
(201.6 |
3/8” |
|||||||||
cm) |
|
|
||||||||
to |
|
|
|
min. |
||||||
bottom |
||||||||||
|
|
|
of |
|||||||
anti- |
tip |
|
||||||||
|
|
|
|
|
|
|||||
|
|
80- |
|
board |
||||||
|
|
|
||||||||
|
|
|
|
|
|
|||||
(204.6 |
1/2” |
|||||||||
cm) |
|
|
||||||||
to |
|
|
max. |
|||||||
|
|
|
|
|
||||||
|
|
|
bottom |
of |
||||||
anti- |
tip |
|
||||||||
|
|
|
|
|
|
|
board |
|||
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
36” All Refrigerator/Freezer
Anti-Tip Location
|
1-1/2” |
|
||
|
(3 |
.8 |
cm) |
|
|
|
|
||
|
|
|
|
|
|
|
|
29” |
|
|
|
|
(73.7 |
cm) |
|
|
|
|
|
3- |
|
|
|
|
1/2” |
|
|
||
(8. |
|
|
|
|
9 |
cm) |
|
|
|
|
|
|
One 2”x 4” mounting board
One 2”x4” mounting board 1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: IfNote:unit isIfinstalledunit is installeddeeperdeeperthan 24”than(6124”.0(61cm),.0 cm),thenthenshimshimbehind
behind the mounting boards by the difference. the mounting board by the difference.
BottomBottomof antiof -antitip -boardtip boardis 3-is7/8”3-7/8”(9.8(9cm).8 cm)belowbelowtheopeningopeningheightheight. .
Note: Top of unit must be placed firmly under anti-tip board.
Note: Top of unit must be placed firmly under anti-tip board.
10 |
11 |
Dimensions
Dual 30” All Refrigerator/Freezer
3- |
|
(8.1/2” |
|
9 |
cm) |
|
75- |
|
15/16”9 |
|
(192. |
cm) |
|
|
|
|
|
29” |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
(73. |
|
|
|
|
|
|
|
|
7 |
cm) |
|
|
|
30” |
|
|
|
|
||||
|
|
|
|
|
||||
(76. |
|
|
|
|
|
|
|
|
2 |
cm) |
|
|
|
29” |
|||
|
|
|
||||||
|
|
|
|
|||||
|
|
|
|
|
|
(73. |
|
|
|
|
|
|
|
|
7 |
cm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
30” |
|
||
|
|
|
|
(76. |
|
|
|
|
|
|
|
|
|
2 |
cm) |
|
|
|
|
|
|
|
|
|
|
varies |
|
hardware) |
Measurement |
|
d |
|
supplie |
|
(locally |
|
29- |
|
|
|
|
(74.1/2” |
|
|||
9 |
cm) |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
1” |
|
||
|
(2. |
|
|
|
|
54 cm) |
|||
|
between |
units |
||
|
|
|
|
29- |
|
(74.1/2” |
|
9 |
cm) |
|
82- |
|
|
(210.7/8” |
||
|
5 |
cm) |
min. |
||
84- |
to |
|
15/16” |
||
(213. |
cm) |
|
max. |
|
-13/16” |
|||
23 |
|
.5 |
cm) |
|
(60 |
|
|||
|
|
|
||
24 |
-3/4” |
|||
.9 |
cm) |
|||
(62 |
|
|
||
|
|
|
|
Dimensions
Dual 30” & 36” All Refrigerator/Freezer
3- |
|
(8.1/2” |
|
9 |
cm) |
|
75- |
|
15/16”9 |
|
(192. |
cm) |
|
29” |
|
(73. |
|
7 |
cm) |
|
30” |
|
(76. |
|
2 |
cm) |
|
36” |
|
(91. |
|
5 |
cm) |
|
varies Measurementsupplied hardware) (locally
29- |
|
(74.1/2” |
|
9 |
cm) |
|
|
|
|
35- |
|
(2. |
1” |
(90.1/2” |
||
2 |
cm) |
|||
54 |
|
|
||
between |
|
|
||
|
|
cm) |
|
|
|
|
units |
|
|
35” |
|
(88. |
|
9 |
cm) |
|
82- |
|
|
(210.7/8” |
||
|
5 |
cm) |
|
|
|
min. |
||
84- |
to |
|
15/16” |
||
(213. |
cm) |
|
max. |
|
-13/16” |
|||
23 |
|
.5 |
cm) |
|
(60 |
|
|||
|
|
|
||
24 |
-3/4” |
|||
.9 |
cm) |
|||
(62 |
|
|
||
|
|
|
|
12 |
13 |
Dimensions
Dual 36” All Refrigerator/Freezer
3- |
|
(8.1/2” |
|
9 |
cm) |
|
75- |
|
15/16”9 |
|
(192. |
cm) |
|
35” |
|
(88. |
|
9 |
cm) |
|
36” |
|
(91. |
|
5 |
cm) |
|
36” |
|
(91. |
|
5 |
cm) |
|
varies Measurementsupplied hardware) (locally
35- |
|
(90.1/2” |
|
2 |
cm) |
|
|
|
|
35- |
|
|
|
|
|
|
(2. |
1” |
(90.1/2” |
||
2 |
cm) |
|||
54 |
|
|
||
between |
|
|
||
|
|
cm) |
|
|
|
|
units |
|
|
35” |
|
(88. |
|
9 |
cm) |
|
82- |
|
|
(210.7/8” |
||
|
5 |
cm) |
|
|
|
min. |
||
84- |
to |
|
15/16” |
||
(213. |
cm) |
|
max. |
|
-13/16” |
||
23 |
|
.5 |
cm) |
(60 |
|
||
|
|
||
24 |
-3/4” |
||
.9 |
cm) |
||
(62 |
|
||
|
|
Specifications
Dual All Refrigerator/Freezer*
Description |
(2) 30” Units |
|
(1) 36” & (1) 30” Unit |
(2) 36” Units |
|||
Overall width |
60” (152.4 cm) |
|
66” (167.6 cm) |
|
|
72” (182.9 cm) |
|
Overall height (from bottom) |
82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max. |
||||||
Overall depth (from rear) |
To front edge of side trim: 23-13/16” (60.5 cm) |
||||||
|
|
To front of top grille: 24-3/4” (62.9 cm) |
|
||||
|
|
To front edge of door trim: 24” (61.0 cm) |
|||||
Cutout width |
60” (152.4 cm) |
|
66” (167.6 cm) |
|
|
72” (182.9 cm) |
|
Cutout height |
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max. |
||||||
Cutout depth |
|
|
24” (61.0 cm) min.** |
|
|||
Electrical requirements |
(2) 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with |
||||||
|
|
grounded 3-prong plug attached to product |
|||||
Maximum amp usage |
|
|
FDFB5301 - 9.1 amps |
|
|||
|
|
|
FDRB5301 - 5.7 amps |
|
|||
|
|
|
FDFB5361 - 9.5 amps |
|
|||
|
|
|
FDRB5361 - 6.5 amps |
|
|||
Inlet water requirements |
1/4” copper tubing inlet waterline; minimum 20 psi; |
||||||
(All Freezer only) |
|
|
maximum 120 psi |
|
|||
Overall interior dimensions |
|
|
|
|
|
|
|
30” freezer |
|
|
15.9 cu. ft. (450 liters) |
|
|||
30” refrigerator |
|
|
18.4 cu. ft. (522 liters) |
|
|||
36” freezer |
|
|
19.2 cu. ft. (544 liters) |
|
|||
36” refrigerator |
|
|
22.8 cu. ft. (646 liters) |
|
|||
Maximum panel weight |
|
30” freezer or refrigerator |
50 lbs. (22.7 kg) |
||||
|
|
36” freezer or refrigerator |
60 lbs. (27.2 kg) |
||||
Approximate shipping weight |
30” freezer or refrigerator |
|
445 lbs. (200.2 kg) |
||||
|
36” freezer or refrigerator |
|
520 lbs. (234 kg) |
||||
|
|
|
|
|
|
|
|
*For installation of two units side-by-side, a separate grille kit accessory must be purchased.
**Note: Custom panel models fit flush in 25” (63.5 cm) deep cabinet openings. They can be installed in standard 24” (61.0 cm) deep openings. The door faces and top grille will protrude 3/4” (1.9 cm) into the room.
14 |
15 |