Viking K-1900, K-1900-6, K-1900W-2 ASH, K-1900D-2, K-1900W-2 User Manual

...
0 (0)

 

TECHNICAL

K-1900 Series

 

Practice

Hot Line Phones

 

June 27, 2002

TELECOM SOLUTIONS FOR THE 21ST CENTURY

 

 

 

 

 

Economical and Vandal Resistant

Hot-Line Phones

 

The K-1900 Series of Hot-Line phones are pro-

 

grammable to dial a 1-20 digit telephone number

K-1900-6

each time the phone’s handset is lifted. The prod-

ucts may be programmed to Touch Tone

 

K-1900D-2 ASH or pulse dial and will not dial on incoming

 

calls.

K-1900-7

The K-1900 Series phones are available in a desk or wall chassis, as well as in a

vandal resistant panel phone configuration. A network insert dialer is also available, to convert standard phones into hot-line phones.

K-1900W-2 ASH

K-1900D-2

Features

Telephone line powered

Hearing aid compatible amplified handsets

Rotary handset volume control

1 - 20 digit programmable speed dial number

Touch Tone and 10/20 pps pulse dialing

Non-volatile E2 memory (no batteries required)

Restricts fraudulent calls from hand held dialers

K-1900W-2

Applications

Catalog sales

Information kiosks in malls

Courtesy and customer service phones

Automated tellers

Hot-line reservation phones

Replace leased Ringdown circuits

Security and emergency phones (pools, etc.)

Phone...715.386.8861

K-1900D/W-2 available in red or ash

Optional Q170600 ringer (Fax Back Doc 845)

Operates on a C.O. line or analog PABX/KSU extensions

Ring detection (will not dial on incoming calls)

Programmable security code to enter programming mode

Touch Tone programmable

K-1900-6 fits standard 500, 554, 2500 and

2554 set phones

info@vikingelectronics.com

http://www.vikingelectronics.com

Specifications

Power: Telephone line powered (20V DC/18mA minimum) Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity

Dimensions: (see page 2)

Dialing Speed: Normal - 120ms tones/10 pps, Fast - 50ms tones/20 pps

Viking K-1900, K-1900-6, K-1900W-2 ASH, K-1900D-2, K-1900W-2 User Manual

Specifications and Installation

Viking offers three variations of hot-line phones and one network dialer. Below are model numbers and descriptions of the Hot Line phones Viking offers. Each model is designed for specific applications, including varying mounting capabilities and levels of vandal protection. The following sections describe the product model numbers, their applications, installation and specifications.

!Important: Use a minimum wire gauge of 26 when connecting the K-1900 phone to the public switched network.

K-1900D-2 Hot Line Desk Phone

To install the K-1900D-2 insert the RJ11 plug into a standard RJ11 jack

K-1900D-2

RJ11

(not included)

as shown to the right.

 

 

 

 

 

 

 

Dimensions: 230mm x 210mm x 120mm (9.0” x 8.25” x 4.75”)

 

 

 

Shipping Weight: 1.36 Kg (3 lbs)

 

 

 

 

Connections: RJ11

 

 

 

 

Colors: Red or Ash

 

 

 

C.O. Line or Analog

K-1900W-2 Hot Line Wall Phone

PABX/KSU Extension

RJ11W

 

To install the K-1900W-2 line up the pins of the RJ11W jack with the slots

 

 

 

(not included)

 

on the back of the phone, insert and press down as shown to the right.

 

 

 

 

 

Dimensions: 102mm x 108mm x 222mm (4.0” x 4.25” x 8.75”)

 

 

T

 

-or-

E

Shipping Weight: 1.36 Kg (3 lbs)

 

 

L

 

 

 

Connections: RJ11W

 

 

 

E

Colors: Red or Ash

K-1900W-2

 

C.O. Line or Analog

P

 

H

Optional VE-9x12 Weatherproof Housing for the K-1900W-2, available

 

PABX/KSU Extension

O

 

 

N

in emergency red or safety yellow.

For more information on the VE-

 

Optional VE-9x12

E

9x12, retrieve Fax Back Document 413.

 

 

 

Fax Back Doc 413

 

K-1900-6 Hot Line Dialer Network (not included)

The K-1900-6 Hot-Line Dialer Network can be used with any carbon microphone handset and a double pole hook switch or typical 500, 554, 2500 and 2554 phones. Attach wires as shown to the right. An electronic ringer may be used if inbound call capability is required.

Required Handset Type: Carbon microphone Required Hookswitch: One normally open contact and one normally closed contact Dimensions: 88.9mm x 68.6mm x 33mm (3.5” x 2.7” x 1.3”)

Shipping Weight: 0.45 Kg (1.0 lb)

Connections: Miniature spade receptacles Compatible Phones: 500, 554, 2500 and 2554

 

K-1900-6 PCB with Standard Network

 

C.O. Line

Mounting Bracket (included)

 

or Analog

 

0.47 mF @ 250V

Optional Ringer

PABX/KSU

 

 

Capacitor

(not included)

Extension

Green

(included)

 

 

 

T

 

Red

R

 

 

N.O.

Slate/White

S1

 

 

 

 

 

 

 

Slate/Green

S2

White or

Hookswitch

 

 

 

Slate/Red

RX2

Green

(shown on

 

 

White

 

 

RX1

hook)

 

 

N.C.

 

Black

 

 

TX1

 

 

Slate/Black

Red

 

 

TX2

 

 

 

 

Note: If the phone has a ringer,

the included capacitor MUST be installed as shown above.

Carbon Mic

Handset (not included)

K-1900-7 Hot Line Panel Phone

To install the K-1900-7 vandal resistant hot line panel phone, attach the panel to an existing double gang box (with minimum dimensions shown right) using the provided screws. Insert a cord into the RJ11 jack on the back of the K-1900-7.

Note: Four extra screws and nuts are provided to fill the unused mounting holes.

Dimensions: 127mm x 254mm x 102mm (5” x 10” x 4”)

Shipping Weight: 1.36 Kg (3 lbs) Connections: RJ-11

Panel Material: .125 inch stainless steel Mounting: Flush mount to the included double gang box. Optional VE-5x10 weather resistant surface mount box and VE-9x20 weatherproof box for outdoor applications available.

 

 

 

3.69"

5.22"

Double Gang

 

 

 

 

 

Electrical Box

 

 

 

 

 

 

Side View of

 

 

 

 

 

(not included)

 

 

 

 

 

the K-1900-7

 

T

 

 

 

2.1"

3.5"

 

 

 

 

 

 

E

 

 

 

 

 

 

 

 

 

 

 

 

 

L

- or -

 

- or -

 

 

 

E

 

 

 

20.25"

 

 

 

 

 

 

P

 

10.14"

 

2.75"

 

 

 

H

 

 

 

 

 

 

 

O

 

 

 

 

 

 

 

N

 

 

 

 

 

 

 

E

 

 

 

 

 

 

 

9.25"

 

Optional VE-5x10

 

 

 

Optional VE-9x20

C.O. Line or

 

Surface Mount Box

#6-32 x 3/4”

Analog PABX/KSU

Weatherproof Box

Fax Back Doc 424

Extension

Stainless Steel

Fax Back Doc 413

(not included)

 

 

Hexdrive Screws

(not included)

 

 

 

 

 

Included

Loading...
+ 2 hidden pages