Silvercrest SDBK 2200 A1 User Manual

- 1 -
CONTENT PAGE
Intended Use 2
Safety instructions 2
Items supplied 3
Operating Elements 3
Before the First Use 3
Operation 4
Filling with mains water....................................................................................................................4
Plugging in and ironing 5
Steam ironing 5
Ironing with steam blast 5
Temporarily setting the steam iron aside 6
Taking the steam iron out of service 6
Drip-Stop Function 6
Cleaning 6
Self-cleaning function .......................................................................................................................6
Housing .............................................................................................................................................7
Metal parts........................................................................................................................................7
Troubleshooting 7
Technical data 7
Disposal 7
Warranty and Service 7
Importer 8
Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass the manual on to whomsoever might acquire the appliance at a later date.
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 1
- 2 -
STEAM IRON
Intended Use
The steam iron is intended exclusively for the ironing of textiles. The iron may only be used indoors and in private households. All other use is deemed improper use.
Safety instructions
Risk of burns!
• Grasp the steam iron only by the handle when it is hot.
• This appliance is not intended for use by individuals (including children) with restricted physical, physio­logical or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used.
• Children should be supervised to ensure that they do not play with the appliance.
• Never hold your hand over the steam spray or on hot metal parts.
• You should not open the filler opening of the water reservoir while the iron is in use. First allow the steam iron to cool down and remove the plug from the power socket.
Risk of fire!
• Never leave the steam iron unattended when it is hot or switched on.
• Put the steam iron into storage only when it has cooled down completely.
• When ironing, use only the temperatures detailed in the garment care instructions, or those suitable for the material. Otherwise, you could damage the textiles. Should care instructions not be given or known, start with the lowest temperature setting.
• NEVER permit children to use the steam iron.
• Place the station on a level and heat-resistent sur­face. The station must be stable when you place the steam iron onto it.
• If you want to put the steam iron down, simply stand it on the cable base or place it in the station.
Risk of electrical shocks.
• The rating of the local power supply must tally completely with the details given on the rating plate of the appliance.
• To avoid potential risks, arrange for a defective appliance to be checked and possibly repaired by qualified technicians, or contact our Customer Service Department.
• Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department.
• To disconnect from the power source, pull only on the plug itself, not on the cable.
• Never bend (kink) or crush the power cable. Arrange it in such a way that it cannot come into contact with hot surfaces and so that no-one can step on or trip over it.
• After every use, before cleaning and when re­filling with water, remove the plug from the power socket.
• Always unroll the power cable fully before switching on and do not use an extension cable.
• Never touch the power cable or the power plug with wet hands.
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 2
- 3 -
• Under no circumstances should you submerge the steam iron in any liquid or permit liquids to penetrate into the housing of the steam iron. Do not expose the appliance to humidity and do not use it outdoors. Should liquids enter the housing, unplug the appliance from the power socket im­mediately and arrange for it to be repaired by a qualified technician.
• Never use the steam iron adjacent to water contained in a bath, shower, wash basin or other vessels. The proximity of moisture presents a danger, even when the appliance is switched off.
• You may not open the housing of the steam iron. Permit only authorised technicians to repair a defective appliance should repairs be necessary.
• Under no circumstances should you use the steam iron if it bears visible signs of damage, has fallen or leaks water. Arrange for it to be repaired by qualified specialists.
Attention!
• Should the clothing care instructions forbid ironing, (Symbol ), the clothing item may not be ironed. If you do so, the clothing item could be permanently damaged.
• The water tank is to be filled exclusively with mains or distilled water. You will otherwise damage the steam iron.
• You may not clean the steam iron with solvents, alcohol or abrasive cleaning agents. These could damage it.
Items supplied
Steam iron Station Cable base Measuring beaker Operating instructions
Operating Elements
1 Water jet 2 Filler opening for the water tank 3 Steam regulator 4 Button for fine water spray 5 Button for steam blast 6 Temperature control lamp 7 Temperature regulator 8 Cable base 9 Power cable 0 Unlocking switch q Station w Cable retainer e Ironing sole r Self-clean button
Before the First Use
• Remove the steam iron from the packaging.
• Remove all protective coverings and protective foils from the steam iron and from the sole of the iron e.
• Plastic bags can be dangerous. To avoid the risks of asphyxiation, keep plastic bags out of the reach of toddlers and small children.
• Pour water into the water tank (see chapter "Filling with tap water").
• Connect the steam iron with the cable base 8 and with the station q (see chapter "Instructions for Use").
• Insert the plug into a wall power socket supplying an electrical current as detailed on the rating plate.
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 3
- 4 -
• Place the temperature regulator 7 into the position
"MAX".
• Heat the steam iron up for several minutes at this highest setting.
• Remove the steam iron from the station q (see chapter “Tips for utilisation”).
• Press the button for the steam blast 5 a few times such that steam exits from the soleplate e.
• Then iron a piece of material that is no longer required, to remove possible contamination from the sole of the iron e.
Tips for utilisation
In addition to the typical utilisation with a cable, you can also separate the steam iron from the cable base 8 for a short period to iron textiles which are not located close to an electrical power socket.
To separate the steam iron from the cable base 8:
• Place the steam iron, with the cable base 8 engaged, onto the station q. The unlocking switch 0 must be in the position .
• Slide the unlocking switch 0 into the position . The steam iron now allows itself to be lifted off. The cable base 8 remains combined with the station q.
Note:
As the steam iron cannot be heated up without the cable base 8, you can only work for a short period without the cable base 8. Reconnect the steam iron with the cable base 8 as soon as the steam blast or the ironing quality diminishes.
To reconnect the steam iron with the cable base 8:
• Insert the steam iron into the cable base 8 connected to the station q. Slide the unlocking switch 0 to . You can now lift the steam iron with the cable base 8 from the station q.
Should you wish to secure the steam iron to the station q, for safekeeping for example, slide the un­locking switch 0 with the preplaced steam iron to . The steam iron can now no longer be removed from the station q.
Operation
Filling with mains water
• In a cooled condition, place the steam iron horizontally on its sole e.
• Slide off the cover of the filler opening for the water tank 2.
• Using the measuring beaker, fill the water tank with water to the "Max" marking, but no further.
• Slide the cover of the filler opening for the water tank 2 back to close it.
Note
Should the mains water at your locality be rated as hard, it is recommended that you mix mains water with some distilled water. Otherwise, the jets for the steam blast function could calcify (become blocked) prematurely. To extend the optimal steam blast function, mix mains water with distilled water according to the table.
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 4
- 5 -
The water hardness level can be queried at your local water works.
Plugging in and ironing
Dry ironing without steam is possible at all temperatures, steam ironing is first possible from the adjustment range on the temperature regulator 7.
• Insert the plug into a power socket.
Attention!
Should the clothing care instructions forbid ironing, (Symbol ), the clothing item may not be ironed. If you do so, the clothing item could be permanently damaged.
• Check the care instructions on the labels in the garment to see if it is suitable for being ironed, and at which temperature setting.
Water hardness
Ratios - distilled water to mains water
very soft / soft 0
medium 1: 1
hard 2: 1
very hard 3: 1
• Select the best suitable temperature setting with
the temperature controller 7.
The control lamp for the temperature 6 glows. When the set temperature has been reached, the temperature control lamp 6 goes out.
• Wait until the temperature control lamp 6
extinguishes.
• To moisten the laundry, press the spray button 4.
This function is suitable for very dry and very crumpled garments.
Steam ironing
• Programme the steam regulator 3 to the desired
steam setting.
• The temperature regulator 7 must be turned into
at least the adjustment range . Otherwise it cannot produce any steam.
Ironing with steam blast
The steam blast is especially suitable for smoothing difficult to reach parts of a garment.
• Slightly raise the steam iron.
• For a steam blast, press the steam blast button
5.
Symbol Temperature regulator
a
Type of Material
Acrylic, rayon
Silk, wool, polyester
blended fabrics
Cotton, linen, viscose
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 5
- 6 -
Temporarily setting the steam iron aside
Risk of fire!
Never leave the steam iron unattended when it is hot or switched on.
• Place the temperature regulator 7 into the
position "MIN".
• Place the steam iron only on the cable base 8 or insert it onto the station q.
Taking the steam iron out of service
• Remove the plug from the wall power socket.
• Empty the water tank and clean the sole of the iron e.
• Place the cooled down steam iron on the station q and secure it, in that you slide the unlocking switch 0 into the position .
• The power cable 9 can be wrapped and stored around the cable retainer w on the underside of the station q:
Drip-Stop Function
With conventional steam irons it can happen that water drips from the iron sole e at low temperatures. This iron however possesses a new equipment charac­teristic, the DRIP-STOP function. At low temperatures the iron automatically switches off the steam-blast function. When this happens, a “CLICK” is to be heard. You must then re-set a suitable temperature with the temperature controller 7. As soon as this is reached, steam production is continued.
Cleaning
Self-cleaning function
• Connect the steam iron with the cable base 8.
• Fill the water tank to the marking MAX.
• Insert the plug into a wall socket.
• Place the temperature regulator 7 into the
position MAX.
• Adjust the steam regulator 3 to maximum steam
power.
• Allow the steam iron to heat up until the heat
control lamp 6 extinguishes and once again glows.
• Hold the steam iron horizontally over a catchment receptacle.
• Position the steam regulator 3 at the maximal steam power level. Press and hold down the button Self-clean r. Thereby, steam and boiling water flows from the steam exit holes in the sole of the iron e. Impurities that may be present are washed out.
• Release the Self-clean button r as soon as all of the water has exited.
• Thoroughly dry the sole of the iron e. For this, slide the sole of the iron e back and forth over a hand towel or an old piece of material several times.
• Allow the steam iron to cool down before placing it in storage.
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 6
- 7 -
Housing
Risk of personal injury!
ALWAYS remove the plug before cleaning the ap­pliance. There is a danger of electric shock! Allow the appliance to cool down. Risk of Burns!
• Clean the housing with a soft, dry cloth only.
Important!
Do not use aggressive, abrasive or chemical cleaning agents. These could attack the surfaces and cause irreparable damage to the appliance.
Metal parts
• Clean the metal components with a lightly water­moistened cloth and a mild, non-abrasive cleaning agent.
Troubleshooting
The steam iron blows out no or very little steam:
The reserves of water in the steam iron are depleted. Fill the water tank with mains water (See "Filling with mains water").
The steam iron does not get hot:
The steam iron is not plugged in or is not switched on. Insert the plug into a wall power socket and adjust the temperature regulator 7 to the desired ironing temperature.
The steam iron is defect. Arrange for the steam iron to be repaired by qualified specialists.
Technical data
Power Supply Voltage: 220 - 240 V~/50 Hz max. power consumption: 2200 W
Disposal
Do not dispose of the appliance in your normal domestic waste. This appliance is subject to the provisions of European Directive 2002/96/EC.
Dispose of the appliance through an approved dis­posal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an environmentally friendly manner.
Warranty and Service
The warranty for this appliance is for 3 years from the date of purchase. The appliance has been ma­nufactured with care and meticulously examined be­fore delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Depart­ment. Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and manufacturing defects, but not for transport dama­ge, for wearing parts or for damage to fragile com­ponents, e.g. buttons or batteries. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampe­ring not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty.
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 7
- 8 -
The warranty period will not be extended by repairs made under warranty. This applies also to replaced and repaired parts. Any damage and defects extant on purchase must be reported immediately after un­packing the appliance, at the latest, two days after the purchase date. Repairs made after the expira­tion of the warranty period are subject to payment.
DES UK LTD
Tel.: 0871 5000 700
(£ 0.10 / minute)
e-mail: support.uk@kompernass.com
Kompernass Service Ireland
Tel.: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: support.ie@kompernass.com
Kompernass Service Cyprus
Tel.: 800 9 44 01 e-mail: support.cy@kompernass.com
Importer
KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY
www.kompernass.com
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 8
CY
- 9 -
SADRŽAJ STRANA
Upotreba u skladu sa namjenom 10 Sigurnosne napomene 10 Obim isporuke 11 Elementi za rukovanje 11 Prije prve uporabe 11 Napomene u pogledu uporabe 12 Rukovanje 12
Punjenje pitkom vodom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Priključivanje i glačanje 13 Glačanje sa parom 13 Glačanje sa izbačajem pare 13 Privremeno odložite glačalo na paru 14 Isključivanje glačala na paru iz pogona 14 Funkcija stop-kapljanje 14 Čišćenje 14
Funkcija samostalnog čišćenja . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Kućište . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Metalni dijelovi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Otklanjanje funkcionalnih smetnji 15 Tehnički podaci 15 Zbrinjavanje 15 Jamstvo i servis 15 Uvoznik 16
Ove upute sačuvajte za kasnija pitanja – i prilikom predavanja uređaja trećim osobama obavezno priložite i ove upute!
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 9
- 10 -
GLAČALO NA PARU
Upotreba u skladu sa namjenom
Glačalo na paru isključivo je namijenjeno za glačanje odjeće. Smijete ga koristiti isključivo unutar zatvorenih prostorija i u privatnim domaćinstvima. Svi drugi načini upotrebe smatraju se protivnim namjeni uređaja.
Sigurnosne napomene
Opasnost od opeklina!
• Vruće glačalo na paru uhvatite isključivo za rukohvat.
• Ovaj uređaj nije namijenjen da bude korišten od strane osoba (uključujući djecu) sa ograničenim fizičkim, senzoričnim i mentalnim osobinama i nedostatkom iskustva ili znanja, osim ako ove osobe stoje pod nadzorom druge osobe zadužene za njihovu sigurnost, ili ako su od nje primili upute za ispravno korištenje uređaja.
• Djeca bi trebala biti pod nadzorom, čime treba biti osigurano da se ne mogu igrati ovim uređajem.
• Nikada ruku ne stavite u izlazeću paru i ne prislonite je na vruće metalne dijelove.
• Otvor za punjenja spremnika sa vodom ne smijete otvarati za vrijeme uporabe. Prvo ostavite, da se glačalo ohladi, a zatim izvucite utikač iz utičnice za struju.
Opasnost od požara!
• Vruće ili uključeno glačalo nikada ne ostavite bez nadzora.
• Parno glačalo spremite isključivo u ohlađenom stanju.
• Glačajte samo uz temperaturne postavke navedene na uputama za održavanje, koje moraju biti pri­kladne za dotični materijal. U protivnom možete oštetiti rublje. Ukoliko vam nisu poznate upute za održavanje, započnite sa najnižom postavkom temperature.
• Nikada ne dopustite djeci da upotrebljavaju glačalo na paru.
• Stanicu postavite na ravnu podlogu otpornu na visoke temperature. Stanica mora stabilno stajati, kada parno glačalo na nju stavljate.
• Ako parno glačalo želite ispustiti iz ruke, samo ga odložite na kabelskom postolju ili ga stavite na stanicu.
Opasnost od strujnog udara!
• Napon izvora struje mora odgovarati podacima na tipskoj ploči uređaja.
• Defektni uređaj u svrhu popravka neizostavno dajte kvalificiranoj stručnoj radionici ili se obrati­te servisu za kupce, kako bi bile izbjegnute opasnosti.
• Oštećene mrežne utikače ili oštećen mrežni kabel neizostavno dajte zamijeniti od strane autorizir­anog stručnog osoblja ili servisa za kupce, kako biste izbjegli nastanak opasnosti.
• Uvijek povlačite samo utičnicu, a nikada kabel.
• Ne savijajte i ne gnječite mrežni kabel i postavite ga tako, da ne može doći u dodir sa vrućim pov­ršinama, te da nitko ne može na njega stati ili se preko njega protepsti.
• Prije čišćenja, prilikom punjenja vodom i nakon svake upotrebe utikač izvucite iz utičnice.
• Prije uključivanja uređaja mrežni kabel uvijek potpuno odmotajte i ne koristite produžni kabel.
• Kabel ili mrežni utikač nikada ne dirajte vlažnim rukama.
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 10
- 11 -
• Parno glačalo nikada ne smijete uroniti u tekućinu. Također ne smijete dopustiti, da tekućine dospiju u kućište glačala na paru. Uređaj ne smijete iz­ložiti vlagi i ne smijete ga koristiti na otvorenom prostoru. Ukoliko ipak tekućina dospije u kućište uređaja, odmah izvucite utikač uređaja iz utičnice, te uređaj odnesite kvalificiranom stručnom osoblju na popravak.
• Parno glačalo nikako ne koristite u blizini vode, koja se nalazi u kadama, tuševima, umivaonicima ili drugim spremnicima za vodu. Blizina vode uvijek predstavlja opasnost, i onda kada je uređaj isključen.
• Kućište glačala na paru ne smijete otvarati. Pokvareno glačalo na paru na popravak dajte isključivo kvalificiranom stručnom osoblju.
• Parno glačalo ne koristite niukom slučaju, ukoliko ima vidna oštećenja, ukoliko je palo ili ako ispuš­ta vodu. Prvo dajte uređaj kvalificiranom struč­nom osoblju na popravak.
Pažnja!
• Ukoliko napomene za održavanje odjeće za­branjuju glačanje (simbol ), ne smijete glačati dotični tekstil. U protivnom možete oštetiti dotičnu odjeću.
• U spremnik za vodu smijete napuniti isključivo pitku vodu iz slavine/destiliranu vodu. U protivnom ćete oštetiti parno glačalo.
• Parno glačalo ne smijete čistiti pomoću otapala, alkohola ili habajućih sredstava za čišćenje. U protivnom biste mogli oštetiti ovaj uređaj.
Obim isporuke
Glačalo na paru Stanica Postolje za kabel Mjerna čašica Upute za rukovanje
Elementi za rukovanje
1 Sapnica za vodu 2 Umetni otvor spremnika za vodu 3 Regulator pare 4 Tipka za vodenu maglu 5 Tipka za izbačaj pare 6 Kontrolna lampica za temperaturu 7 Regulator temperature 8 Postolje za kabel 9 Mrežni kabel 0 Prekidač za deblokadu q Stanica w Namatač za kabel e Stopalo za glačanje r Selfclean-tipka
Prije prve uporabe
• Parno glačalo izvadite iz ambalaže.
• Sve naljepnice i dijelove folije uklonite sa parnog glačala i sa stope za glačanje e.
• Plastične vrećice mogu predstavljati opasnost. Da biste izbjegli opasnost od gušenja, plastične vrećice držite uvijek izvan dohvata beba i male djece.
• Umetnite vodu u spremnik (vidi poglavlje „Um­etanje pitke vode“).
• Povežite parno glačalo sa kabelskim postoljem 8 i sa stanicom q (vidi poglavlje „Upute za ru­kovanje“).
• Utaknite mrežni utikač u mrežnu utičnicu, koja odgovara naponu navedenom na tipskoj ploči uređaja.
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 11
- 12 -
• Postavite regulator temperature 7 u položaj „MAX“.
• Parno glačalo zagrijte nekoliko minuta na najvišem stupnju.
• Skinite glačalo sa stanice q (vidi poglavlje “Napomene u vezi sa uporabom”).
• Aktivirajte tipku za izbačaj pare 5 nekoliko puta, tako da para iza?e iz stope za glačanje e.
• Zatim glačajte komad tkanine, koji Vam više nije potreban, kako biste eventualno prisutne nečistoće sa stope za glačanje e odstranili.
Napomene u pogledu uporabe
Parno glačalo možete, osim uobičajene uporabe pomoću kabela, nakratko i odvojiti od kabelskog postolja 8, kako biste glačali tekstilne predmete, u čijoj blizini se ne nalazi mrežna utičnica.
Da biste parno glačalo odvojili od kabelskog postolja 8:
• Nataknite parno glačalo sa ulegnutim kabelskim postoljem 8 na stanicu q. Prekidač za deblo­kadu 0 mora stajati u poziciji .
• Gurnite prekidač za deblokadu 0 u poziciju
. Parno glačalo sada možete izdignuti. Kabelsko postolje 8 ostaje povezano sa stani­com q.
Napomena:
Pošto parno glačalo bez kabelskog postolja 8 više ne vrši zagrijavanje, možete samo nakratko bez kabelskog postolja 8 raditi. Povežite parno glačalo ponovo sa kabelskim postoljem 8, čim snaga izbačaja pare ili učinak glačanja popuste.
Da biste parno glačalo ponovo povezali sa kabelskim postoljem 8:
• Nataknite parno glačalo tako, da bude u na stanici q pričvršćenom kabelskom postolju 8. Gurnite prekidač za deblokadu 0 u položaj
. Sada možete parno glačalo sa kabel-
skim postoljem 8 podizanjem skinuti sa stanice q.
Ako parno glačalo na stanici q želite blokirati, primjerice za sigurno čuvanje, gurnite prekidač za deblokadu 0 na postavljenom glačalu u položaj
. Parno glačalo sada više ne može biti sa stanice
q skinuto.
Rukovanje
Punjenje pitkom vodom
• Postavite parno glačalo u ohlađenom stanju vodoravno na stopu za glačanje e.
• Guranjem poklopac otvora za umetanje vode u spremnik 2 otvorite.
• Pomoću čašice za mjerenje spremnik napunite pitkom vodom najviše do oznake „Max“.
• Guranjem poklopac otvora za umetanje vode u spremnik 2 zatvorite.
Napomena
Ukoliko je voda u Vašem mjestu previše tvrda, preporučujemo da je pomiješate sa destiliranom vodom. U protivnom se u sapnicama za funkciju izbačaja pare mogu prije vremena stvoriti vapnene naslage. Za produženje optimalne funkcije izbačaja pare običnu vodu pomiješajte sa destiliranom vodom u skladu sa tablicom.
IB_56770_SDBK2200A1_LB7 13.08.2010 13:50 Uhr Seite 12
Loading...
+ 27 hidden pages