Congratulations on the purchase of your new
appliance.
You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information on safety, usage
and disposal. Before using the product, familiarise
yourself with all handling and safety guidelines.
Use the product only as described and for the range
of applications specified. Please also pass these
operating instructions on to any future owner.
Intended use
The steam iron is intended exclusively for the ironing
of textiles. The iron may only be used indoors and
in domestic households. All other use is deemed to
be improper use. It is not suitable for commercial
use!
Package contents
Steam iron
Measuring cup
Operating instructions
Description of the appliance
Figure A:
Water jet
Filler opening for the water tank
Steam control
Button for the spray function
Steam blast button
Temperature control
Temperature/automatic switch-off control lamp
Power cable with anti-kink protection
Base
Sole of the iron
- Self-clean button
Figure B:
3 Measuring beaker
Technical data
Supply voltage: 220–240 V ~/
50/60 Hz
Max. power
consumption: 2200 - 2600 W
■ 2 │ GB
│
CY
SDBE 2600 A1
Safety instructions
RISK OF ELECTRIC SHOCK!
► The voltage of the power source must conform to the details given
on the type plate of the appliance.
► In order to avoid potential risks, arrange for defective appliances
to be checked and possibly repaired by qualified technicians, or
contact our customer service department.
► To prevent accidents, have defective plugs and/or power cables
replaced immediately by an authorised specialist technician or
our customer service department.
► When disconnecting the appliance from the power source, pull
only on the plug itself, never on the cable.
► Never bend (kink) or crush the power cable, always route it in
such a way that it cannot come into contact with hot surfaces and
such that no one can step on or trip over it.
► Remove the plug from the mains power socket after every usage,
before cleaning the appliance and when refilling the appliance
with water.
► Always unroll the power cable fully before switching on and do
not use an extension cable.
► Never touch the power cable or the plug with wet hands.
► Never use the steam iron adjacent to water contained in a bath,
shower, wash basin or other vessels. Water in the proximity of the
appliance is hazardous, even if the appliance is switched off.
► Under no circumstances should you submerge the steam iron in
any liquid or permit liquids to penetrate into the housing of the
steam iron. Do not expose the appliance to humidity and do
not use it outdoors. If liquid gets into the housing, disconnect the
appliance from the mains power socket immediately and have it
repaired by a qualified technician.
► Do not open the steam iron appliance housing. Have a defective
appliance repaired only by an authorised technician.
SDBE 2600 A1
GB│CY
│
3 ■
RISK OF ELECTRIC SHOCK!
► Do NOT use the appliance if it shows visible signs of damage, has
fallen or leaks water. Arrange for it to be repaired by qualified
specialists.
► Stop using the appliance if the anti-kink protection on the power
cable is damaged!
► This appliance may be used by children aged 8 years or more
and by persons with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge if they are supervised, or have been instructed in the safe use of the appliance
and have understood the potential risks. Children must not play
with the appliance. Cleaning and user maintenance may not be
carried out by children unless they are supervised.
RISK OF BURNS!
► Hold the steam iron only by the handle when it is hot.
► Children should be supervised to ensure that they do not play
with the appliance.
► Never place your hands in the steam spray or on hot metal parts.
► Do not open the filler opening of the water reservoir while the
iron is in use. Allow the steam iron to cool down first and remove
the plug from the power socket.
► The iron and its connecting cable must be kept out of the reach of
children under the age of than 8 while the iron is switched on or
cooling down.
■ 4 │ GB
│
CY
SDBE 2600 A1
RISK OF INJURY! RISK OF FIRE!
► Never leave a hot steam iron unattended if it is switched on or
connected to the mains power supply.
► Do not put the steam iron away until it has cooled down com-
pletely.
► This steam iron should only be used and set down on stable
surfaces.
► Use only the ironing temperatures stated in the care instructions
as suitable for the material. Otherwise, you could damage the
textiles. If you do not know the correct care instructions, start with
the lowest temperature setting.
► Place the iron only on a level and heat-resistant surface. The iron
must be stable.
► When you want to put the steam iron down, always place it on its
base.
CAUTION! PROPERTY DAMAGE!
► If the clothing care instructions forbid ironing, ( symbol), the
clothing item may not be ironed. Ignoring this warning could lead
to permanent damage to the clothing item.
► The water tank should be filled only with tap water or distilled
water. Otherwise you will damage the steam iron.
► Do not clean the steam iron with solvents, alcohol or abrasive
cleaning agents. These could damage it.
SDBE 2600 A1
GB│CY
│
5 ■
Before first use
■ Remove the steam iron from the packaging.
■ Remove all stickers and protective films from the
steam iron and from the sole of the iron .
RISK OF CHOKING!
► Plastic bags can be dangerous. To avoid fatal-
ities through suffocation, keep plastic bags out
of the reach of children.
■ Fill the water tank with water (See the chapter
"Filling the water tank").
■ Insert the plug into a mains power socket supply-
ing an electrical current as detailed on the rating
plate.
■ Move the temperature control to the "MAX"
position.
■ Heat the steam iron up for several minutes at the
highest setting.
■ Activate the steam blast button
of times so that steam comes out of the sole of
the iron .
■ Then iron over a piece of scrap fabric to remove
any production residues that may remain on the
sole of the iron .
a couple
Filling the water tank
■ Hold the iron in your hand at an angle.
■ Open the cover of the filler opening for the
water tank .
■ Using the measuring breaker 3, fill the water
tank with tap water/distilled water to the "MAX"
marking (and no further).
■ Close the cover of the filler opening for the
water tank .
NOTE
Should the mains water at your locality be rated
as hard, it is recommended that you mix the mains
water with some distilled water. Otherwise, the
jets for the steam blast function could calcify
(become blocked) prematurely.
To extend the optimal steam blast function, mix
mains water with distilled water according to the
table:
Water
hardness
very soft/soft0
medium1:1
hard2:1
very hard3:1
Ratio of distilled
water to
tap water
■ 6 │ GB
│
CY
The water hardness level can be queried at your
local water works.
SDBE 2600 A1
Plugging in and ironing
Dry ironing without steam is possible at all temperatures, steam ironing is only possible from the setting
range on the temperature control .
Inser
■
t the plug into a mains power socket.
CAUTION! PROPERTY DAMAGE!
► If the clothing care instructions forbid ironing,
symbol), the clothing item may not be
(
ironed. Ignoring this warning could lead to
permanent damage to the clothing item.
■ Check the care instructions on the labels in
garments to see if they are suitable for being
ironed, and at which temperature setting.
Temperature
control
icon
■ Select the appropriate temperature setting using
the temperature control .
NOTE
While it is heating up, always place the iron on
the base .
If you place the iron down on its sole and do
not move it, the automatic switch-off will be activated after 30 seconds (see chapter "Automatic
switch-off") and the appliance stops heating.
Type of Material
Acrylic, rayon
Silk, wool,
polyester mix fabrics
Cotton, linen,
viscose
The temperature control lamp lights up. When
the control lamp goes out, the set temperature
has been reached.
■ Wait until the temperature control lamp
goes out.
■ To moisten the laundry, press the spray
button .
This function is suitable for very dry and very
crumpled garments.
Steam ironing
■ Set the steam control to the desired steam
setting.
■ The temperature control must be set to at
least the setting
be produced.
. Otherwise no steam can
Ironing with steam blast
The steam blast function is especially suitable for
smoothing difficult-to-reach parts of a garment.
■ Raise the steam iron slightly.
■ For a steam blast, press the steam blast
button
You can also use the steam blast function to smooth
hanging textiles.
Hold the iron vertically and press the
.
steam blast button
.
Putting the steam iron down
RISK OF FIRE!
► Never leave a hot steam iron unattended if
it is switched on or connected to the mains
power supply.
SDBE 2600 A1
GB│CY
│
7 ■
■ Move the temperature control to the "MIN"
position.
Stand the steam iron only on the base .
■
After use
■ Remove the power plug from the mains power
socket.
■ Empty the water tank and clean the sole of the
iron .
■ Place the cooled-down steam iron on the base .
Drip-Stop function
With conventional steam irons, water can drip from
the sole of the iron at low temperatures.
This iron, however, possesses a new feature: the
DRIP-STOP function (). At low temperatures the iron automatically switches off the
steam-blast function.
Then set a suitable temperature with the temperature control . As soon as this is reached, steam
production is resumed.
Automatic switch-off
This steam iron is fitted with an automatic switch-off
system. This stops the iron from heating up.
If the iron is resting on its sole and is not moved
for about 30 seconds, there will be a warning beep
and the control lamp for the automatic switch-off
flashes. The iron will stop heating up. To deactivate
the automatic switch-off, lift up the iron and move
it gently from side to side. The control lamp for the
automatic switch-off goes out and the iron will
heat up again.
If the iron is resting on its base and is not moved
for about 8 seconds, there will be a warning beep
and the control lamp for the automatic switch-off
flashes. The iron will stop heating up. To deactivate
the automatic switch-off, lift up the iron and move
it gently from side to side. The control lamp for the
automatic switch-off goes out and the iron will
heat up again.
NOTE
The automatic switch-off is not intended as a
substitute for removing the plug from the mains
power! This is merely intended to reduce the fire
hazard if you forget to switch of the iron!
Cleaning
Self-cleaning function
■ Fill the water tank to the "MAX" marking.
■ Insert the plug into the mains power socket.
■ Move the temperature control to the "MAX"
position.
■ Set the steam control to maximum steam
power.
■ Allow the steam iron to heat up until the heat
control lamp goes out and then lights up
again.
■ Hold the steam iron horizontally over a suitable
container.
■ Press and hold down the self-clean button -.
Move the steam iron back and forth a little.
Steam and boiling water will flow from the
steam exit holes in the sole of the iron . Any
impurities that may be present are flushed out.
■ Release the self-clean button - as soon as all
of the water has flown out of the water tank.
■ 8 │ GB
│
CY
SDBE 2600 A1
■ Dry the sole of the iron thoroughly. To do
this, move the sole of the iron back and forth
several times over a towel or an old piece of
fabric.
Allow the steam iron to cool down before placing
■
it in storage.
Housing and sole of the iron
MORTAL DANGER!
► ALWAYS remove the plug before cleaning the
appliance. There is a risk of electric shock!
RISK OF INJURY!
► Allow the appliance to cool down before
cleaning it. Otherwise, there is a risk of burns!
CAUTION! PROPERTY DAMAGE!
► Do not use aggressive, abrasive or chemical
cleaning agents. They can damage the surface
and also lead to irreparable damage to the
appliance.
■ Clean the housing with a soft, dry cloth only.
■ Clean the sole of the iron using a damp cloth
and a mild, non-scouring detergent.
■ Dry the appliance well before using it again.
Storage
Store the cooled-down appliance in a clean, dustfree and dry location.
Troubleshooting
The steam iron blasts out no steam/very
little steam:
The reserves of tap water/distilled water in the
steam iron are depleted. Fill the water tank (See
"Filling the water tank").
The steam iron does not get hot:
■ The steam iron is not plugged in or is not switched
on. Insert the plug into a wall power socket and
adjust the temperature control to the desired
ironing temperature.
■ The steam iron is defective. Arrange for the steam
iron to be repaired by qualified specialists.
Disposal
Never dispose of the appliance
in the normal domestic waste.
This product is subject to the
provisions of European Directive
2012/19/EU.
Dispose of the appliance through an approved
disposal centre or at your community waste facility.
Please observe applicable regulations. Please
contact your waste disposal facility if you are in
any doubt.
Dispose of all packaging materials in an
environmentally friendly manner.
SDBE 2600 A1
GB│CY
│
9 ■
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase. If this product has any faults,
you, the buyer, have certain statutory rights. Your
statutory rights are not restricted in any way by the
warranty described below.
Warranty conditions
The validity period of the warranty starts from the
date of purchase. Please keep your original receipt
in a safe place. This document will be required as
proof of purchase.
If any material or production fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
at our discretion. This warranty service is dependent on you presenting the defective appliance and
the proof of purchase (receipt) and a short written
description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product
will either be repaired or replaced by us. The repair
or replacement of a product does not signify the
beginning of a new warranty period.
Warranty period and statutory
claims for defects
The warranty period is not prolonged by repairs
effected under the warranty. This also applies to
replaced and repaired components. Any damage
and defects present at the time of purchase must
be reported immediately after unpacking. Repairs
carried out after expiry of the warranty period shall
be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected
meticulously prior to delivery.
The warranty covers material faults or production
faults. The warranty does not extend to product
parts subject to normal wear and tear or fragile
parts such as switches, batteries, baking moulds or
parts made of glass.
The warranty does not apply if the product has been
damaged, improperly used or improperly maintained.
The directions in the operating instructions for the
product regarding proper use of the product are
to be strictly followed. Uses and actions that are
discouraged in the operating instructions or which
are warned against must be avoided.
This product is intended solely for private use and
not for commercial purposes. The warranty shall be
deemed void in cases of misuse or improper handling,
use of force and modifications/repairs which have
not been carried out by one of our authorised
Service centres.
Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
▯ Please have the till receipt and the item number
(e.g. IAN 12345) available as proof of purchase.
▯ You will find the item number on the type plate,
an engraving on the front page of the instructions
(bottom left), or as a sticker on the rear or bottom
of the appliance.
▯ If functional or other defects occur, please
contact the service department listed either by
telephone or by e-mail.
▯ You can return a defective product to us free of
charge to the service address that will be provided
to you. Ensure that you enclose the proof of purchase (till receipt) and information about what
the defect is and when it occurred.
■ 10 │ GB
│
CY
You can download these instructions
along with many other manuals,
product videos and software on
www.lidl-service.com.
Αποφασίσατε έτσι για την απόκτηση ενός προϊόντος υψηλής ποιότητας. Οι οδηγίες χρήσης είναι
τμήμα αυτού του προϊόντος. Περιέχουν σημαντικές
υποδείξεις για την ασφάλεια, τη χρήση και την
απόρριψη. Πριν από τη χρήση του προϊόντος,
εξοικειωθείτε με όλες τις υποδείξεις χειρισμού και
ασφάλειας. Χρησιμοποιείτε το προϊόν μόνο όπως
περιγράφεται και για τους αναφερόμενους τομείς
χρήσης. Παραδώστε όλα τα έγγραφα σε περίπτωση παράδοσης του προϊόντος σε τρίτους.
Προβλεπόμενη χρήση
Το ατμοσίδερο προορίζεται αποκλειστικά για το
σιδέρωμα ρούχων. Επιτρέπεται να το χρησιμοποιείτε μόνο εντός κλειστών χώρων και σε ιδιωτικά
νοικοκυριά. Όλες οι άλλες χρήσεις ισχύουν ως μη
σύμφωνες με τους κανονισμούς. Μην το χρησιμοποιείτε για επαγγελματικό σκοπό!
Καλώδιο με προστασία συστροφής
Υποδοχή
Πάτος σίδερου
- Πλήκτρο Selfclean (Αυτοκαθαρισμός)
Εικόνα B:
3 Δοχείο μέτρησης
Τεχνικά χαρακτηριστικά
Τάση τροφοδοσίας: 220 - 240 V ~/50/60 Hz
Μέγ. κατανάλωση
ισχύος: 2200 - 2600 W
■ 14 │ GR
│
CY
SDBE 2600 A1
Υποδείξεις ασφαλείας
ΚΙΝΔΥΝΟΣ ΗΛΕΚΤΡΟΠΛΗΞΙΑΣ!
► Η τάση της πηγής ρεύματος πρέπει να συμφωνεί με τις πληροφο-
ρίες επάνω στην πινακίδα τύπου της συσκευής.
► Η επισκευή μίας ελαττωματικής συσκευής πρέπει να γίνεται εγκαί-
ρως από ένα εξουσιοδοτημένο συνεργείο ή θα πρέπει να απευθύνεστε στην υπηρεσία εξυπηρέτησης πελατών για να αποφεύγετε κινδύνους.
► Τα βύσματα ή τα καλώδια που έχουν υποστεί βλάβη πρέπει να
αντικαθίστανται αμέσως από εξουσιοδοτημένο εξειδικευμένο
προσωπικό ή από το τμήμα εξυπηρέτησης πελατών, ώστε να
αποφεύγονται κίνδυνοι.
► Τραβάτε πάντα μόνο από το φις, ποτέ από το καλώδιο.
► Μην κάμπτετε ή συμπιέζετε το καλώδιο και τοποθετείτε το έτσι ώστε
να μην έρχεται σε επαφή με καυτές επιφάνειες και να μην μπορεί
κανείς να πατάει ή να σκοντάφτει επάνω σε αυτό.
► Τραβάτε το βύσμα από την πρίζα πριν από τον καθαρισμό, κατά
την πλήρωση με νερό και μετά από κάθε χρήση.
► Πριν από την ενεργοποίηση ξετυλίγετε πάντα εντελώς το καλώδιο
και μη χρησιμοποιείτε καλώδια επέκτασης.
► Ποτέ μην πιάνετε το καλώδιο ή το βύσμα με βρεγμένα χέρια.
► Σε καμία περίπτωση μη χρησιμοποιείτε το ατμοσίδερο κοντά σε
νερό, το οποίο βρίσκεται σε μπανιέρες, ντους, νιπτήρες ή σε
άλλα δοχεία. Υπάρχει κίνδυνος από την ύπαρξη νερού, ακόμα
και όταν η συσκευή είναι εκτός ρεύματος.
► Σε καμία περίπτωση δεν επιτρέπεται να βυθίζετε το ατμοσίδερο σε
υγρά και δεν επιτρέπεται να αφήνετε να εισχωρούν υγρά στο περίβλημά του. Απαγορεύεται η έκθεση της συσκευής σε υγρασία,
καθώς και η χρήση της σε εξωτερικούς χώρους. Στην περίπτωση
που εισχωρήσει πάντως υγρό στο περίβλημα της συσκευής,
αποσυνδέστε αμέσως το βύσμα της συσκευής από την πρίζα και
αναθέστε την επισκευή σε εξειδικευμένο προσωπικό.
SDBE 2600 A1
GR│CY
│
15 ■
ΚΙΝΔΥΝΟΣ ΗΛΕΚΤΡΟΠΛΗΞΙΑΣ!
► Δεν επιτρέπεται να ανοίγετε το περίβλημα του ατμοσίδερου. Το
ελαττωματικό ατμοσίδερο επιτρέπεται να επισκευάζεται μόνο από
εξουσιοδοτημένο προσωπικό.
► Μη χρησιμοποιείτε το ατμοσίδερο σε καμία περίπτωση όταν έχει
εμφανείς φθορές, εάν έχει πέσει κάτω ή εάν τρέχει νερό. Πρέπει
πρώτα να γίνει επισκευή από εξουσιοδοτημένο προσωπικό.
► Μη συνεχίζετε τη χρήση της συσκευής, εάν η προστασία συστρο-
φής του καλωδίου έχει φθαρεί!
► Αυτή η συσκευή μπορεί να χρησιμοποιείται από παιδιά άνω των
8 ετών και από άτομα με μειωμένες φυσικές, αισθητηριακές ή νοητικές δυνατότητες ή με έλλειψη εμπειρίας και/ή γνώσεων, εφόσον
επιτηρούνται ή εάν έχουν εκπαιδευτεί αναφορικά με την ασφαλή
χρήση της συσκευής και έχουν κατανοήσει τους τυχόν επακόλουθους κινδύνους. Τα παιδιά δεν επιτρέπεται να παίζουν με τη
συσκευή. Ο καθαρισμός και η συντήρηση χρήστη δεν επιτρέπεται
να διεξάγονται από παιδιά, χωρίς επιτήρηση.
ΚΙΝΔΥΝΟΣ ΕΓΚΑΥΜΑΤΟΣ!
► Πιάνετε το ατμοσίδερο αποκλειστικά από τη χειρολαβή όταν είναι
ζεστό.
► Τα παιδιά πρέπει να επιτηρούνται, ώστε να εξασφαλίζεται ότι δεν
παίζουν με τη συσκευή.
► Ποτέ μην έχετε τα χέρια σας στο σημείο ώθησης ατμού ή σε καυ-
τά μεταλλικά τμήματα.
► Κατά τη λειτουργία μην ανοίγετε το στόμιο πλήρωσης για το
δοχείο νερού. Αφήστε πρώτα το ατμοσίδερο να κρυώσει και τραβήξτε το βύσμα από την πρίζα.
► Το σίδερο και το καλώδιο σύνδεσής του πρέπει να βρίσκονται
μακριά από παιδιά μικρότερα των 8 ετών κατά την ενεργοποίηση
ή το κρύωμα του σίδερου.
■ 16 │ GR
│
CY
SDBE 2600 A1
ΚΙΝΔΥΝΟΣ ΤΡΑΥΜΑΤΙΣΜΟΥ!
ΚΙΝΔΥΝΟΣ ΠΥΡΚΑΓΙΑΣ!
► Ποτέ μην αφήνετε ανεπιτήρητο ένα ατμοσίδερο, το οποίο είναι
συνδεδεμένο στο δίκτυο ρεύματος ή ενεργοποιημένο.
► Αποθηκεύετε το ατμοσίδερο μόνο εφόσον έχει κρυώσει.
► Το ατμοσίδερο πρέπει να χρησιμοποιείται και να τοποθετείται
επάνω σε μια σταθερή επιφάνεια.
► Σιδερώνετε μόνο σύμφωνα με τις κατάλληλες ρυθμίσεις θερμο-
κρασίας που αναφέρονται στις υποδείξεις περιποίησης και στο
υλικό υφάσματος. Σε διαφορετική περίπτωση μπορεί να φθείρετε
τα ρούχα. Εάν δε γνωρίζετε τις υποδείξεις περιποίησης, τότε
ξεκινήστε με την ελάχιστη ρύθμιση θερμοκρασίας.
► Τοποθετείτε το σίδερο μόνο επάνω σε μία επίπεδη και θερμανθε-
κτική επιφάνεια. Το σίδερο πρέπει να είναι σταθερό.
► Εάν θέλετε να αφήσετε το ατμοσίδερο, να το τοποθετείτε μόνο
επάνω στην υποδοχή.
ΠΡΟΣΟΧΗ! ΥΛΙΚΕΣ ΖΗΜΙΕΣ!
► Εάν οι υποδείξεις περιποίησης στο ρούχο απαγορεύουν το
σιδέρωμα (σύμβολο
), τότε δεν επιτρέπεται να το σιδερώσετε.
Σε διαφορετική περίπτωση μπορεί να το καταστρέψετε.
► Επιτρέπεται να γεμίζετε το δοχείο νερού αποκλειστικά με νερό
βρύσης/αποσταγμένο νερό. Σε αντίθετη περίπτωση θα καταστρέψετε το ατμοσίδερο.
► Δεν επιτρέπεται να καθαρίζετε το ατμοσίδερο με διαλυτικά μέσα,
οινόπνευμα ή τριβικά καθαριστικά μέσα. Διαφορετικά μπορεί να
το φθείρετε.
SDBE 2600 A1
GR│CY
│
17 ■
Πριν την πρώτη χρήση
■ Απομακρύνετε το ατμοσίδερο από τη συσκευασία.
■ Απομακρύνετε όλα τα αυτοκόλλητα και τα τμήμα-
τα μεμβρανών από το ατμοσίδερο και από τον
πάτο του σίδερου .
ΚΙΝΔΥΝΟΣ ΑΣΦΥΞΙΑΣ!
► Οι πλαστικές σακούλες μπορούν να είναι επι-
κίνδυνες. Για την αποφυγή κινδύνου ασφυξίας, φυλάτε τις πλαστικές σακούλες εκτός
εμβέλειας των βρεφών και μικρών παιδιών.
■ Γεμίστε το δοχείο νερού με νερό (βλ. Κεφάλαιο
«Πλήρωση δοχείου νερού»).
■ Τοποθετήστε το βύσμα σε μία πρίζα που να
αντιστοιχεί στην αναγραφόμενη τάση στην
πινακίδα τύπου.
■ Θέστε το ρυθμιστή θερμοκρασίας στη θέση
«MAX».
■ Θερμάνετε το ατμοσίδερο μερικά λεπτά στην
υψηλότερη βαθμίδα.
■ Πιέστε το πλήκτρο ώθησης ατμού
κές φορές, ώστε να αρχίσει να εξέρχεται ατμός
από τον πάτο του σίδερου .
■ Σιδερώστε στη συνέχεια ένα άχρηστο κομμάτι
ύφασμα για να εξαλείψετε ενδεχόμενες ακαθαρσίες από τον πάτο του σίδερου .
μερι-
Πλήρωση δοχείου νερού
■ Κρατήστε το ατμοσίδερο λοξά στο χέρι.
■ Ανοίξτε το καπάκι του στομίου πλήρωσης για
το δοχείο νερού .
■ Γεμίστε με το δοχείο μέτρησης 3 νερό βρύσης/
αποσταγμένο νερό έως το μέγιστο στη σήμανση
«MAX» στο δοχείο νερού.
■ Κλείστε το καπάκι του στομίου πλήρωσης για το
δοχείο νερού .
ΥΠΟΔΕΙΞΗ
Εάν το νερό βρύσης της περιοχής σας είναι πολύ
σκληρό, προτείνεται να αναμείξετε το νερό δικτύου με αποσταγμένο νερό. Αλλιώς τα ακροφύσια
ώθησης ατμού μπορεί να γεμίσουν πρόωρα με
άλατα.
Για την παράταση της άψογης λειτουργίας
ώθησης ατμού αναμίξτε το νερό βρύσης με
αποσταγμένο νερό σύμφωνα με τον πίνακα:
Σκληρότητα
νερού
πολύ μαλακό /
μαλακό
μέτριο1:1
σκληρό2:1
πολύ σκληρό3:1
Αναλογία
αποσταγμένου
νερού προς
νερό βρύσης
0
■ 18 │ GR
│
CY
Μπορείτε να μάθετε για τη σκληρότητα νερού
στην τοπική εγκατάσταση ύδρευσης.
SDBE 2600 A1
Σύνδεση και σιδέρωμα
Στεγνό σιδέρωμα χωρίς ατμό είναι δυνατό σε όλες
τις θερμοκρασίες, σιδέρωμα με ατμό γίνεται από
το σημείο ρύθμισης στο ρυθμιστή θερμοκρασίας .
■ Συνδέστε το βύσμα σε μια πρίζα.
ΠΡΟΣΟΧΗ! ΥΛΙΚΕΣ ΖΗΜΙΕΣ!
► Εάν οι υποδείξεις περιποίησης στο ρούχο
απαγορεύουν το σιδέρωμα (σύμβολο
τότε δεν επιτρέπεται να το σιδερώσετε.
Σε διαφορετική περίπτωση μπορεί να το
καταστρέψετε.
■ Ελέγξτε τις υποδείξεις φροντίδας στην ετικέτα
του ρούχου και το εάν ενδείκνυται το σιδέρωμα
σε αυτό και σε ποια θερμοκρασία.
Σύμβολο ρυθμιστή
θερμοκρασίας
Είδος υφάσματος
Ακρυλικό, ραιγιόν
Μετάξι, μαλλί,
συνθετικά-
πολυεστερικά
Βαμβάκι, λινό,
βισκόζη
),
Η λυχνία ελέγχου θερμοκρασίας ανάβει.
Όταν σβήσει η λυχνία ελέγχου , έχει επιτευχθεί
η ρυθμισμένη θερμοκρασία.
■
Περιμένετε έως ότου σβήσει η λυχνία ελέγχου
θερμοκρασίας .
Για να υγράνετε τα πλυμένα ρούχα πιέστε το
■
πλήκτρο λειτουργίας ψεκασμού
Αυτή η λειτουργία ενδείκνυται για πολύ στεγνά και
τσαλακωμένα ρούχα.
.
Σιδέρωμα με ατμό
■ Θέστε με το ρυθμιστή ατμού την επιθυμητή
ένταση ατμού.
■ Ο ρυθμιστής θερμοκρασίας πρέπει να έχει
στραφεί τουλάχιστον έως το σημείο ρύθμισης
. Αλλιώς δεν μπορεί να δημιουργηθεί
ατμός.
Σιδέρωμα με ώθηση ατμού
Η ώθηση ατμού ενδείκνυται ειδικά για το ίσιωμα σε
δύσκολα προσβάσιμα σημεία των ρούχων.
■ Σηκώστε λίγο το ατμοσίδερο.
■ Πιέστε για μία ώθηση ατμού το σχετικό πλήκτρο
ώθησης ατμού
.
■ Θέστε την ενδεδειγμένη ρύθμιση θερμοκρασίας
με το ρυθμιστή θερμοκρασίας .
ΥΠΟΔΕΙΞΗ
Κατά το ζέσταμα τοποθετείτε το ατμοσίδερο
πάντα στην υποδοχή .
Όταν τοποθετείτε το ατμοσίδερο κατά τη διάρκεια της θέρμανσης στον πάτο του σίδερου
και δεν το μετακινείτε, μετά από 30 δευτερόλεπτα
ενεργοποιείται η αυτόματη απενεργοποίηση (βλ.
Κεφάλαιο «Αυτόματη απενεργοποίηση» και η
συσκευή σταματάει το ζέσταμα.
SDBE 2600 A1
Με τη βοήθεια της ώθησης ατμού μπορείτε επίσης
να ισιώσετε υφάσματα που κρέμονται.
Κρατήστε το ατμοσίδερο κάθετα και πατήστε το πλήκτρο για την ώθηση ατμού
.
Προσωρινή απενεργοποίηση
του ατμοσίδερου
ΚΙΝΔΥΝΟΣ ΠΥΡΚΑΓΙΑΣ!
► Ποτέ μην αφήνετε ανεπιτήρητο ένα ατμοσίδε-
ρο, το οποίο είναι συνδεδεμένο στο δίκτυο
ρεύματος ή ενεργοποιημένο.
GR│CY
│
19 ■
■ Θέστε το ρυθμιστή θερμοκρασίας στη θέση
«MIN».
Τοποθετήστε το ατμοσίδερο μόνο επάνω στην
■
υποδοχή .
Απενεργοποίηση σίδερου με
ατμό
■ Τραβήξτε το βύσμα από την πρίζα.
■ Αδειάστε το δοχείο νερού και καθαρίστε τον
πάτο του σίδερου .
■ Τοποθετήστε το ατμοσίδερο στην υποδοχή
αφού κρυώσει.
Λειτουργία αποφυγής
σταξίματος
Σε σύνηθες σιδέρωμα με ατμό και σε μικρή θερμοκρασία σιδερώματος μπορεί να στάξει νερό από τον
πάτο του σίδερου . Αυτό το ατμοσίδερο έχει ωστόσο ένα νέο χαρακτηριστικό εξοπλισμού, τη λειτουργία ΑΠΟΦΥΓΗΣ ΣΤΑΞΙΜΑΤΟΣ ().
Το ατμοσίδερο απενεργοποιεί αυτόματα την ώθηση
ατμού σε χαμηλές θερμοκρασίες.
Ρυθμίστε στη συνέχεια με το ρυθμιστή θερμοκρασίας την ενδεδειγμένη θερμοκρασία. Μόλις αυτή
επιτευχθεί, η παραγωγή ατμού συνεχίζεται.
Αυτόματη απενεργοποίηση
Το ατμοσίδερο είναι εξοπλισμένο με μια λειτουργία
αυτόματης απενεργοποίησης. Αυτή η λειτουργία
σταματάει τη θέρμανση του ατμοσίδερου.
Όταν το ατμοσίδερο βρίσκεται στον πάτο του σίδερου και δεν μετακινηθεί περ. για 30 δευτερόλεπτα, ακούγονται σήματα προειδοποίησης και η
λυχνία ελέγχου για την αυτόματη απενεργοποίηση
αναβοσβήνει. Η θέρμανση του ατμοσίδερου
σταματάει. Για να απενεργοποιήσετε την αυτόματη απενεργοποίηση σηκώστε το ατμοσίδερο και
κουνήστε το λίγο πέρα-δώθε. Η λυχνία ελέγχου για
την αυτόματη απενεργοποίηση σβήνει και το
σίδερο αρχίζει πάλι να ζεσταίνεται.
Όταν το σίδερο βρίσκεται στην υποδοχή και
δεν μετακινηθεί περ. για 8 λεπτά, ακούγονται
σήματα προειδοποίησης και η λυχνία ελέγχου για
την αυτόματη απενεργοποίηση αναβοσβήνει.
Η θέρμανση του ατμοσίδερου σταματάει. Για να
απενεργοποιήσετε την αυτόματη απενεργοποίηση
σηκώστε το ατμοσίδερο και κουνήστε το λίγο
πέρα-δώθε. Η λυχνία ελέγχου για την αυτόματη
απενεργοποίηση σβήνει και το σίδερο αρχίζει
πάλι να ζεσταίνεται.
ΥΠΟΔΕΙΞΗ
Η αυτόματη απενεργοποίηση δεν αντικαθιστά
την αποσύνδεση του βύσματος από την πρίζα!
Εξυπηρετεί αποκλειστικά τη μείωση του κινδύνου
πυρκαγιάς, όταν το σίδερο δεν απενεργοποιηθεί
κατά λάθος!
Καθαρισμός
Λειτουργία αυτοκαθαρισμού
■ Γεμίστε το δοχείο νερού μέχρι τη σήμανση
«MAX».
■ Βάλτε το βύσμα στην πρίζα.
■ Θέστε το ρυθμιστή θερμοκρασίας στη θέση
«MAX».
■ Θέστε το ρυθμιστή ατμού στη μέγιστη δύνα-
μη ατμού.
■ Αφήστε το ατμοσίδερο να ζεσταθεί, έως ότου
σβήσει η λυχνία ελέγχου θερμοκρασίας και
ανάψει πάλι.
■ Κρατήστε το ατμοσίδερο σε θέση οριζόντια
επάνω από μία λεκάνη.
■ Πατήστε το πλήκτρο Selfclean - και κρατήστε
το πατημένο. Μετακινήστε τότε το ατμοσίδερο
λίγο πέρα - δώθε. Εξέρχεται ατμός και βραστό
νερό από τις οπές εξόδου ατμού στον πάτο του
σίδερου . Τυχόν υπάρχουσες ακαθαρσίες
αποπλένονται και εκρέουν προς τα έξω.
■ Αφήστε το πλήκτρο Self-Clean - ελεύθερο,
μόλις αδειάσει το νερό από το δοχείο νερού.
■ 20 │ GR
│
CY
SDBE 2600 A1
■ Στεγνώστε καλά τον πάτο του σίδερου . Για το
σκοπό αυτό, περάστε τον πάτο του σίδερου
μερικές φορές πέρα - δώθε σε ένα πανί ή σε ένα
παλαιό κομμάτι ύφασμα.
Αφήστε το ατμοσίδερο να κρυώσει πριν το
■
αποθηκεύσετε.
Περίβλημα και πάτος σίδερου
ΚΙΝΔΥΝΟΣ ΘΑΝΑΤΟΥ!
► Τραβήξτε το φις από την πρίζα πριν τον κα-
θαρισμό. Υπάρχει κίνδυνος ηλεκτροπληξίας!
ΚΙΝΔΥΝΟΣ ΤΡΑΥΜΑΤΙΣΜΟΥ!
► Αφήνετε τη συσκευή να κρυώνει πριν από
τον καθαρισμό! Αλλιώς υπάρχει κίνδυνος
εγκαύματος!
ΠΡΟΣΟΧΗ! ΥΛΙΚΕΣ ΖΗΜΙΕΣ!
► Μη χρησιμοποιείτε άγρια, εκτριπτικά και
χημικά μέσα καθαρισμού. Αυτά μπορεί να
βλάψουν την εξωτερική επιφάνεια και να
προκαλέσουν ανεπανόρθωτες βλάβες στη
συσκευή.
■ Καθαρίζετε το περίβλημα μόνο με ένα μαλακό,
στεγνό πανί.
■ Καθαρίζετε τον πάτο του σίδερου με ένα ελα-
φρώς νωπό πανί και ένα απαλό απορρυπαντικό
που δεν προκαλεί τριβή.
■ Πριν από την εκ νέου χρήση, στεγνώνετε εντελώς
τη συσκευή.
Διόρθωση δυσλειτουργιών
Το ατμοσίδερο δε βγάζει ή βγάζει ελάχιστο
ατμό προς τα έξω: Το απόθεμα νερού βρύσης/
αποσταγμένου νερού στο ατμοσίδερο έχει εξαντληθεί. Γεμίστε το δοχείο νερού (βλ. «Πλήρωση
δοχείου νερού»).
Το ατμοσίδερο δεν ζεσταίνεται:
■ Το σίδερο δεν είναι συνδεδεμένο ή ενεργοποι-
ημένο. Τοποθετήστε το βύσμα στην πρίζα και
ρυθμίστε την επιθυμητή θερμοκρασία με το
ρυθμιστή θερμοκρασίας .
■ Το ατμοσίδερο είναι ελαττωματικό. Το ατμοσί-
δερο πρέπει να επισκευαστεί από εξειδικευμένο
προσωπικό.
Απόρριψη
Σε καμία περίπτωση μην απορ-
ρίπτετε τη συσκευή στα οικιακά
απορρίμματα. Αυτό το προϊόν
υπόκειται στην Ευρωπαϊκή
Οδηγία 2012/19/ΕU.
Απορρίπτετε τη συσκευή μέσω μιας εγκεκριμένης
επιχείρησης απόρριψης ή μέσω της κοινοτικής
επιχείρησης απόρριψης.
Τηρείτε τις ισχύουσες προδιαγραφές. Σε περίπτωση
αμφιβολιών, επικοινωνείτε με την αρμόδια επιχείρηση απόρριψης.
Απομακρύνετε όλα τα υλικά συσκευ-
ασιών με φιλικό προς το περιβάλλον
τρόπο.
Φύλαξη
Φυλάτε τη συσκευή αφού κρυώσει σε έναν καθαρό
και στεγνό χώρο χωρίς σκόνη.
SDBE 2600 A1
GR│CY
│
21 ■
Εγγύηση της
Kompernass Handels GmbH
Αξιότιμη πελάτισσα, αξιότιμε πελάτη,
Η παρούσα συσκευή διαθέτει 3 χρόνια εγγύηση
από την ημερομηνία αγοράς. Στην περίπτωση
ελλείψεων στο προϊόν έχετε νομικά δικαιώματα
έναντι του πωλητή του προϊόντος. Αυτά τα νομικά
δικαιώματα δεν περιορίζονται μέσω της κατωτέρω
αναφερόμενης εγγύησης.
Προϋποθέσεις εγγύησης
Η περίοδος εγγύησης ξεκινάει κατά την ημερομηνία
αγοράς. Φυλάξτε καλά την πρωτότυπη απόδειξη
ταμείου. Αυτό το έγγραφο απαιτείται ως απόδειξη
για την αγορά.
Εάν, εντός τριών ετών από την ημερομηνία αγοράς,
προκύψει στο προϊόν αυτό σφάλμα υλικού ή
κατασκευής, κατόπιν κρίσης μας, επισκευάζουμε
ή αντικαθιστούμε το προϊόν για εσάς δωρεάν.
Η παρούσα εγγύηση προϋποθέτει ότι εντός της
περιόδου τριών ετών η ελαττωματική συσκευή και
η απόδειξη αγοράς (απόδειξη ταμείου) θα υποβληθούν μαζί με σύντομη περιγραφή σχετικά με το
που βρίσκεται η έλλειψη και πότε προέκυψε.
Εάν το ελάττωμα καλύπτεται από την εγγύησή μας,
θα λάβετε το επισκευασμένο ή ένα νέο προϊόν.
Εύρος εγγύησης
Η συσκευή κατασκευάστηκε σύμφωνα με αυστηρές
οδηγίες ποιότητας και ελέγχθηκε προσεκτικά πριν
από την αποστολή.
Η απόδοση εγγύησης ισχύει για σφάλματα υλικού
ή κατασκευής. Η παρούσα εγγύηση δεν εκτείνεται
σε τμήματα του προϊόντος, τα οποία εκτίθενται σε
φυσιολογική φθορά και έτσι μπορεί να θεωρούνται
εξαρτήματα φθοράς ή για ζημιές σε εύθραυστα
εξαρτήματα, π.χ. διακόπτες, συσσωρευτές, ταψιά ή
εξαρτήματα που είναι κατασκευασμένα από γυαλί.
Η παρούσα εγγύηση ακυρώνεται εάν προκληθεί
ζημιά στο προϊόν, εάν δεν γίνεται σωστή χρήση ή
συντήρηση. Για μια σωστή χρήση του προϊόντος
πρέπει να τηρούνται επακριβώς οι αναφερόμενες
υποδείξεις στις οδηγίες χειρισμού. Σκοποί χρήσης
και χειρισμοί που δεν συνιστώνται ή για τους οποίους υπάρχει προειδοποίηση πρέπει απαραίτητα να
αποφεύγονται.
Το προϊόν προορίζεται μόνο για ιδιωτική και όχι
για επαγγελματική χρήση. Σε περίπτωση κακής μεταχείρισης και ακατάλληλης χρήσης, χρήσης βίας
και παρεμβάσεων, οι οποίες δεν διεξήχθησαν από
το εξουσιοδοτημένο μας τμήμα σέρβις, η εγγύηση
παύει να ισχύει.
Περίοδος εγγύησης και νομικές
απαιτήσεις λόγω ελλείψεων
Ο χρόνος εγγύησης δεν παρατείνεται μέσω της παροχής εγγύησης. Αυτό ισχύει και για εξαρτήματα,
τα οποία έχουν αντικατασταθεί και επισκευαστεί.
Ενδεχόμενες ήδη υπάρχουσες ζημιές και ελλείψεις
κατά την αγορά πρέπει να γνωστοποιούνται αμέσως μετά την αποσυσκευασία. Μετά τη λήξη του
χρόνου εγγύησης, τυχόν εμφανιζόμενες επισκευές
χρεώνονται.
■ 22 │ GR
│
CY
SDBE 2600 A1
Διαδικασία σε περίπτωση εγγύησης
Για την εξασφάλιση γρήγορης επεξεργασίας του
ζητήματός σας, τηρείτε τις ακόλουθες υποδείξεις:
▯ Για όλες τις ερωτήσεις έχετε έτοιμη την απόδειξη
αγοράς και τον κωδικό προϊόντος (π.χ. ΙΑΝ
12345) ως απόδειξη για την αγορά.
▯ Μπορείτε να βρείτε τον κωδικό προϊόντος στην
πινακίδα τύπου, χαραγμένο, στην πρώτη σελίδα
των οδηγιών σας (κάτω αριστερά) ή σε αυτοκόλλητο στην πίσω ή κάτω πλευρά.
▯ Εάν προκύψουν σφάλματα λειτουργίας ή άλλες
ελλείψεις, επικοινωνήστε κατ’ αρχήν με το ακόλουθο αναφερόμενο τμήμα σέρβις τηλεφωνικά ή
με E-Mail.
▯ Ένα προϊόν που θεωρείται ελαττωματικό μπορείτε
να το αποστείλετε ατελώς στην αναφερόμενη διεύθυνση του σέρβις επισυνάπτοντας την απόδειξη
αγοράς (απόδειξη ταμείου) και αναφέροντας
που βρίσκεται η έλλειψη και πότε εμφανίστηκε.
Στην ιστοσελίδα www.lidl-service.com
μπορείτε να κατεβάσετε το παρόν και
πολλά άλλα εγχειρίδια, βίντεο προϊόντων
και λογισμικό.
Herzlichen Glückwunsch zum Kauf Ihres neuen
Gerätes.
Sie haben sich damit für ein hochwertiges Produkt
entschieden. Die Bedienungsanleitung ist Bestandteil dieses Produkts. Sie enthält wichtige Hinweise
für Sicherheit, Gebrauch und Entsorgung. Machen
Sie sich vor der Benutzung des Produkts mit allen
Bedien- und Sicherheitshinweisen vertraut. Benutzen Sie das Produkt nur wie beschrieben und für
die angegebenen Einsatzbereiche. Händigen Sie
alle Unterlagen bei Weitergabe des Produkts an
Dritte mit aus.
Bestimmungsgemäßer
Gebrauch
Das Dampfbügeleisen ist ausschließlich zum
Bügeln von Kleidung bestimmt. Sie dürfen es nur
innerhalb geschlossener Räume und in privaten
Haushalten verwenden. Alle anderen Verwendungen gelten als nicht bestimmungsgemäß. Benutzen
Sie es nicht gewerblich!
Lieferumfang
Dampfbügeleisen
Messbecher
Bedienungsanleitung
Gerätebeschreibung
Abbildung A:
Wasserdüse
Einfüllöffnung für den Wassertank
Dampfregler
Taste für die Sprühfunktion
Taste für Dampfstoß
Temperaturregler
Kontrollleuchte
für Temperatur / automatische Abschaltung
Netzkabel mit Knickschutz
Sockel
Bügelsohle
- Selfclean-Taste
Abbildung B:
3 Messbecher
Technische Daten
Versorgungsspannung: 220 - 240 V ~/
50/60 Hz
max. Leistungsaufnahme: 2200 - 2600 W
■ 26 │ DE
│AT│
CH
SDBE 2600 A1
Sicherheitshinweise
GEFAHR DURCH ELEKTRISCHEN SCHLAG!
► Die Spannung der Stromquelle muss mit den Angaben auf dem
Typenschild des Gerätes übereinstimmen.
► Lassen Sie ein defektes Gerät umgehend von einer qualifizierten
Fachwerkstatt instandsetzen oder wenden Sie sich an den Kundenservice, um Gefährdungen zu vermeiden.
► Lassen Sie beschädigte Netzstecker oder Netzkabel sofort von
auto-risiertem Fachpersonal oder dem Kundenservice austauschen, um Gefährdungen zu vermeiden.
► Ziehen Sie immer nur am Netzstecker, niemals am Kabel.
► Knicken oder quetschen Sie das Netzkabel nicht und verlegen
Sie es so, dass es nicht in Kontakt mit heißen Oberflächen kommt
und niemand darauf treten oder darüber stolpern kann.
► Ziehen Sie vor dem Reinigen, beim Auffüllen mit Wasser und
nach jedem Gebrauch den Netzstecker.
► Rollen Sie das Netzkabel vor dem Einschalten immer vollständig
ab und verwenden Sie keine Verlängerungskabel.
► Fassen Sie das Kabel oder den Netzstecker niemals mit feuchten
Händen an.
► Benutzen Sie das Dampfbügeleisen keinesfalls in der Nähe von
Wasser, das in Badewannen, Duschen, Waschbecken oder
anderen Gefäßen enthalten ist. Die Nähe von Wasser stellt eine
Gefahr dar, auch wenn das Gerät ausgeschaltet ist.
► Sie dürfen das Dampfbügeleisen keinesfalls in eine Flüssigkeit tau-
chen und keine Flüssigkeiten in das Gerätegehäuse des Dampfbügeleisens gelangen lassen. Sie dürfen das Gerät keiner Feuchtigkeit
aussetzen und nicht im Freien benutzen. Falls doch einmal Flüssigkeit in das Gerätegehäuse gelangt, ziehen Sie sofort den Netzstecker des Geräts aus der Netzsteckdose und lassen Sie es von
qualifiziertem Fachpersonal reparieren.
SDBE 2600 A1
DE│AT│CH
│
27 ■
GEFAHR DURCH ELEKTRISCHEN SCHLAG!
► Sie dürfen das Gerätegehäuse des Dampfbügeleisens nicht öff-
nen. Lassen Sie das defekte Dampfbügeleisen nur von qualifiziertem Fachpersonal reparieren.
► Benutzen Sie das Dampfbügeleisen auf keinen Fall, wenn es
sichtbare Beschädigungen aufweist, heruntergefallen ist, oder
Wasser ausläuft. Lassen Sie es erst von qualifiziertem Fachpersonal
reparieren.
► Benutzen Sie das Gerät nicht weiter, wenn der Knickschutz am
Netzkabel beschädigt ist!
► Dieses Gerät kann von Kindern ab 8 Jahren und älter und von
Personen mit reduzierten physischen, sensorischen oder mentalen
Fähigkeiten oder Mangel an Erfahrung und/oder Wissen benutzt
werden, wenn sie beaufsichtigt oder bezüglich des sicheren Gebrauchs des Gerätes unterwiesen wurden und die daraus resultierenden Gefahren verstanden haben. Kinder dürfen nicht mit
dem Gerät spielen. Reinigung und Benutzer-Wartung dürfen nicht
durch Kinder ohne Beaufsichtigung durchgeführt werden.
VERBRENNUNGSGEFAHR!
► Fassen Sie das Dampfbügeleisen ausschließlich am Griff an,
wenn es aufgeheizt ist.
► Kinder sollten beaufsichtigt werden, um sicherzustellen, dass sie
nicht mit dem Gerät spielen.
► Halten Sie niemals Ihre Hände in den Dampfstoß oder an heiße
Metallteile.
► Sie dürfen die Einfüllöffnung für den Wassertank während des
Gebrauchs nicht öffnen. Lassen Sie das Dampfbügeleisen zunächst erkalten und ziehen Sie den Netzstecker aus der Netzsteckdose.
► Das Bügeleisen und dessen Anschlussleitung müssen während
des Einschaltens oder Abkühlens außer Reichweite von Kindern
sein, die jünger als 8 Jahre alt sind.
■ 28 │ DE
│AT│
CH
SDBE 2600 A1
VERLETZUNGSGEFAHR! BRANDGEFAHR!
► Lassen Sie das heiße, am Stromnetz angeschlossene oder einge-
► Verstauen Sie das Dampfbügeleisen nur im abgekühlten Zustand.
► Das Dampfbügeleisen muss auf einer stabilen Oberfläche benutzt
und abgestellt werden.
► Bügeln Sie nur mit den auf den Pflegehinweisen angegebenen
und für das Material geeigneten Temperatureinstellungen. Sie
können die Wäsche andernfalls beschädigen. Falls Sie keine
Pflegehinweise kennen, beginnen Sie mit der niedrigsten Temperatureinstellung.
► Stellen Sie das Bügeleisen nur auf einen ebenen und hitzeunemp-
findlichen Untergrund. Das Bügeleisen muss stabil stehen.
► Wenn Sie das Dampfbügeleisen aus der Hand legen wollen,
stellen Sie es nur auf dem Sockel ab.
ACHTUNG! SACHSCHADEN!
► Falls die Pflegehinweise in der Kleidung das Bügeln untersagen
(Symbol
), dürfen Sie das Kleidungsstück nicht bügeln. Sie
könnten das Kleidungsstück andernfalls beschädigen.
► Sie dürfen ausschließlich Leitungswasser /destilliertes Wasser
in den Wassertank einfüllen. Andernfalls beschädigen Sie das
Dampfbügeleisen.
► Sie dürfen das Dampfbügeleisen nicht mit Lösungsmitteln, Alkohol
oder scheuernden Reinigungsmitteln säubern. Andernfalls könnten
Sie es beschädigen.
SDBE 2600 A1
DE│AT│CH
│
29 ■
Vor dem ersten Gebrauch
■ Entnehmen Sie das Dampfbügeleisen aus der
Verpackung.
■ Entfernen Sie alle Aufkleber und Folienteile vom
Dampfbügeleisen und der Bügelsohle .
ERSTICKUNGSGEFAHR!
► Plastiktüten können eine Gefahr darstellen. Um
Erstickungsgefahr zu vermeiden, bewahren
Sie die Plastiktüten außerhalb der Reichweite
von Babys und Kleinkindern auf.
■ Füllen Sie Wasser in den Wassertank (siehe
Kapitel „Wassertank befüllen“).
■ Stecken Sie den Netzstecker in eine Netzsteck-
dose, die der auf dem Typenschild angegebenen Spannung entspricht.
■ Stellen Sie den Temperaturregler in die
Position „MAX“.
■ Heizen Sie das Dampfbügeleisen einige Minu-
ten auf der höchsten Stufe auf.
■ Betätigen Sie die Taste für den Dampfstoß
einige Male, so dass Dampf aus der Bügelsohle austritt.
■ Bügeln Sie dann ein nicht mehr benötigtes Stück
Stoff, um eventuelle Unreinheiten von der Bügelsohle zu beseitigen.
Wassertank befüllen
■ Halten Sie das Bügeleisen schräg in der Hand.
■ Öffnen Sie den Deckel der Einfüllöffnung für den
Wassertank .
■ Füllen Sie mit dem Messbecher 3 Leitungs-
wasser/destilliertes Wasser bis höchstens zur
„MAX“-Markierung in den Wassertank.
■ Schließen Sie den Deckel der Einfüllöffnung für
den Wassertank .
HINWEIS
Sollte das Leitungswasser Ihres Wohnortes zu
hart sein, empfiehlt es sich, das Leitungswasser
mit destilliertem Wasser zu mischen. Ansonsten
können die Düsen für die Dampfstoß-Funktion
vorzeitig verkalken.
Zur Verlängerung der optimalen DampfstoßFunktion mischen Sie das Leitungswasser mit
destilliertem Wasser entsprechend der Tabelle:
WasserhärteAnteil destilliertes
Wasser zu
Leitungswasser
sehr weich / weich0
mittel1:1
hart2:1
sehr hart3:1
■ 30 │ DE
│AT│
CH
Die Wasserhärte können Sie beim örtlichem
Wasserwerk erfragen.
SDBE 2600 A1
Anschließen und Bügeln
Trockenbügeln ohne Dampf können Sie bei allen
Temperaturen, Dampfbügeln ist erst ab dem Einstellbereich am Temperaturregler möglich.
S
■
tecken Sie den Netzstecker in eine Netzsteck-
dose.
ACHTUNG! SACHSCHADEN!
► Falls die Pflegehinweise in der Kleidung das
Bügeln untersagen (Symbol
das Kleidungsstück nicht bügeln. Sie könnten
das Kleidungsstück andernfalls beschädigen.
■ Prüfen Sie die Pflegehinweise auf den Schildern
in der Kleidung, ob und bei welcher Temperatureinstellung das Kleidungsstück zum Bügeln
geeignet ist.
Symbol
Temperatur-
regler
), dürfen Sie
Stoffart
Acryl, Rayon
Die Kontrollleuchte für die Temperatur leuchtet.
Wenn die Kontrollleuchte erlischt, ist die eingestellte Temperatur erreicht.
■ Warten Sie, bis die Kontrollleuchte für die Tem-
peratur erlischt.
■ Zum Befeuchten der Wäsche drücken Sie auf
die Taste für die Sprühfunktion
Diese Funktion ist für sehr trockene, stark knittrige
Wäsche geeignet.
.
Dampfbügeln
■ Stellen Sie mit dem Dampfregler die ge-
wünschte Dampfstärke ein.
■ Der Temperaturregler muss mindestens bis in
den Einstellbereich
kann kein Dampf erzeugt werden.
gedreht sein. Ansonsten
Bügeln mit Dampfstoß
Der Dampfstoß eignet sich besonders, um schwer
zugängliche Bereiche der Wäsche zu glätten.
Seide, Wolle,
Polyestermischgewebe
Baumwolle, Leinen,
Viskose
■ Stellen Sie die geeignete Temperatureinstellung
mit dem Temperaturregler ein.
HINWEIS
Stellen Sie das Bügeleisen während des Aufheizens immer auf den Sockel .
Wenn Sie das Bügeleisen während des
Aufheizens auf die Bügelsohle stellen und
nicht bewegen, wird nach 30 Sekunden die
automatische Abschaltung aktiviert (siehe Kapitel
“Automatische Abschaltung”) und das Gerät
stoppt das Heizen.
SDBE 2600 A1
■ Heben Sie das Dampfbügeleisen leicht an.
■ Drücken Sie für einen Dampfstoß die Taste für
den Dampfstoß
Mit Hilfe des Dampfstoßes können Sie auch hängende Textilien glätten.
Halten Sie das Bügeleisen senkrecht und
betätigen Sie die Taste für den Dampfstoß
.
.
Dampfbügeleisen
vorübergehend abstellen
BRANDGEFAHR!
► Lassen Sie das heiße, am Stromnetz ange-
schlossene oder eingeschaltete Dampfbügeleisen niemals unbeaufsichtigt.
DE│AT│CH
│
31 ■
■ Stellen Sie den Temperaturregler in die
Position „MIN“.
Stellen Sie das Dampfbügeleisen nur auf dem
■
Sockel ab.
Dampfbügeleisen außer
Betrieb nehmen
■ Ziehen Sie den Netzstecker aus der Netzsteck-
dose.
■ Leeren Sie den Wassertank und reinigen Sie die
Bügelsohle .
■ Stellen Sie das abgekühlte Dampfbügeleisen auf
den Sockel .
Wenn das Bügeleisen auf dem Sockel steht und
es für ca. 8 Minuten nicht bewegt wird, erklingen
Warnsignale und die Kontrollleuchte für die automatische Abschaltung blinkt. Das Heizen des
Bügeleisens wird gestoppt. Um die automatische
Abschaltung zu deaktivieren, heben Sie das Bügeleisen an und schwenken Sie es leicht hin und her.
Die Kontrollleuchte für die automatische Abschaltung
erlischt und das Bügeleisen heizt wieder auf.
HINWEIS
Die automatische Abschaltung ersetzt nicht das
Ziehen des Netzsteckers! Sie dient lediglich der
Reduzierung der Brandgefahr, wenn das Bügeleisen versehentlich nicht ausgeschaltet wird!
Tropf-Stop-Funktion
Bei herkömmlichen Dampfbügeleisen kann es
vorkommen, dass bei zu geringer Bügeltemperatur
Wasser aus der Bügelsohle tropft. Dieses Bügeleisen weist jedoch ein neues Ausstattungsmerkmal,
die TROPF-STOP-Funktion auf (). Das
Bügeleisen schaltet den Dampfstoß bei niedrigen
Temperaturen automatisch ab.
Stellen Sie dann mit dem Temperaturregler die
geeignete Temperatur ein. Sobald diese erreicht ist,
wird die Dampferzeugung fortgesetzt.
Automatische Abschaltung
Das Bügeleisen ist mit einer automatischen Abschaltung ausgestattet. Diese stoppt das Heizen
des Bügeleisens.
Wenn das Bügeleisen auf der Bügelsohle steht
und es für ca. 30 Sekunden nicht bewegt wird,
erklingen Warnsignale und die Kontrollleuchte
für die automatische Abschaltung blinkt. Das
Heizen des Bügeleisens wird gestoppt. Um die
automatische Abschaltung zu deaktivieren, heben
Sie das Bügeleisen an und schwenken Sie es leicht
hin und her. Die Kontrollleuchte für die automatische Abschaltung erlischt und das Bügeleisen
heizt wieder auf.
Reinigen
Selbstreinigungs-Funktion
■ Füllen Sie den Wassertank bis zur Markierung
„MAX“.
■ Stecken Sie den Netzstecker in die Netzsteckdose.
■ Stellen Sie den Temperaturregler auf Position
„MAX“.
■ Stellen Sie den Dampfregler auf maximale
Dampfstärke.
■ Lassen Sie das Dampfbügeleisen aufheizen, bis
die Kontrollleuchte für die Temperatur erlischt
und erneut aufleuchtet.
■ Halten Sie das Dampfbügeleisen waagerecht
über eine Auffangschüssel.
■ Drücken Sie die Taste Selfclean - und halten
Sie diese gedrückt. Bewegen Sie das Dampfbügeleisen dabei ein wenig hin und her.
Dampf und kochendes Wasser tritt aus den
Dampfaustrittslöchern in der Bügelsohle aus.
Eventuell vorhandene Verunreinigungen werden
dabei herausgespült.
■ Lassen Sie die Taste Selfclean - los, sobald
das Wasser im Wassertank aufgebraucht ist.
■ 32 │ DE
│AT│
CH
SDBE 2600 A1
■ Trocknen Sie die Bügelsohle gründlich.
Führen Sie dazu die Bügelsohle einige Male
über ein Handtuch oder altes Stück Stoff hin
und her.
Lassen Sie das Dampfbügeleisen abkühlen,
■
bevor Sie es zur Seite stellen.
Gehäuse und Bügelsohle
LEBENSGEFAHR!
► Ziehen Sie vor der Reinigung den Netzstecker.
Es besteht die Gefahr eines elektrischen
Schlages!
VERLETZUNGSGEFAHR!
► Lassen Sie das Gerät vor dem Reinigen abküh-
len. Ansonsten besteht Verbrennungsgefahr!
ACHTUNG! SACHSCHADEN!
► Benutzen Sie keine aggressiven, scheuernden
oder chemischen Reinigungsmittel. Diese
können die Oberfläche angreifen und zu
irreparablen Schäden am Gerät führen.
■ Reinigen Sie das Gehäuse nur mit einem wei-
chen, trockenen Tuch.
■ Reinigen Sie die Bügelsohle mit einem leicht
mit Wasser befeuchteten Tuch und einem milden,
nicht scheuernden Reinigungsmittel.
■ Trocknen Sie das Gerät vor einer erneuten
Benutzung vollständig ab.
Fehlfunktionen beseitigen
Das Dampfbügeleisen stößt keinen oder
sehr wenig Dampf aus:
Der Vorrat an Leitungswasser/destilliertem Wasser
im Dampfbügeleisen ist erschöpft. Füllen Sie den
Wassertank (siehe „Wassertank befüllen“).
Das Dampfbügeleisen erhitzt sich nicht:
■ Das Bügeleisen ist nicht angeschlossen oder
nicht eingeschaltet. Stecken Sie den Netzstecker
in die Netzsteckdose und stellen mit dem Temperaturregler die gewünschte Temperatur ein.
■ Das Dampfbügeleisen ist defekt. Lassen Sie das
Dampfbügeleisen von qualifiziertem Fachpersonal reparieren.
Entsorgung
Werfen Sie das Gerät keines-
falls in den normalen Hausmüll.
Dieses Produkt unterliegt der
europäischen Richtlinie
2012/19/EU.
Entsorgen Sie das Gerät über einen zugelassenen
Entsorgungsbetrieb oder über Ihre kommunale
Entsorgungseinrichtung.
Beachten Sie die aktuell geltenden Vorschriften.
Setzen Sie sich im Zweifelsfall mit Ihrer Entsorgungseinrichtung in Verbindung.
Führen Sie alle Verpackungsmaterialien
einer umweltgerechten Entsorgung zu.
Aufbewahren
Bewahren Sie das abgekühlte Gerät an einem
sauberen, staubfreien und trockenen Ort auf.
SDBE 2600 A1
DE│AT│CH
│
33 ■
Garantie der
Kompernaß Handels GmbH
Sehr geehrte Kundin, sehr geehrter Kunde,
Sie erhalten auf dieses Gerät 3 Jahre Garantie ab
Kaufdatum. Im Falle von Mängeln dieses Produkts
stehen Ihnen gegen den Verkäufer des Produkts
gesetzliche Rechte zu. Diese gesetzlichen Rechte
werden durch unsere im Folgenden dargestellte
Garantie nicht eingeschränkt.
Garantiebedingungen
Die Garantiefrist beginnt mit dem Kaufdatum. Bitte
bewahren Sie den Original Kassenbon gut auf.
Diese Unterlage wird als Nachweis für den Kauf
benötigt.
Tritt innerhalb von drei Jahren ab dem Kaufdatum
dieses Produkts ein Material- oder Fabrikationsfehler auf, wird das Produkt von uns – nach unserer
Wahl – für Sie kostenlos repariert oder ersetzt.
Diese Garantieleistung setzt voraus, dass innerhalb
der Drei-Jahres-Frist das defekte Gerät und der
Kaufbeleg (Kassenbon) vorgelegt und schriftlich
kurz beschrieben wird, worin der Mangel besteht
und wann er aufgetreten ist.
Wenn der Defekt von unserer Garantie gedeckt ist,
erhalten Sie das reparierte oder ein neues Produkt
zurück. Mit Reparatur oder Austausch des Produkts
beginnt kein neuer Garantiezeitraum.
Garantieumfang
Das Gerät wurde nach strengen Qualitätsrichtlinien
sorgfältig produziert und vor Auslieferung gewissenhaft geprüft.
Die Garantieleistung gilt für Material- oder Fabrikationsfehler. Diese Garantie erstreckt sich nicht auf
Produktteile, die normaler Abnutzung ausgesetzt
sind und daher als Verschleißteile angesehen werden
können oder für Beschädigungen an zerbrechlichen
Teilen, z. B. Schalter, Akkus, Backformen oder Teile
die aus Glas gefertigt sind.
Diese Garantie verfällt, wenn das Produkt beschädigt,
nicht sachgemäß benutzt oder gewartet wurde. Für
eine sachgemäße Benutzung des Produkts sind alle
in der Bedienungsanleitung aufgeführten Anweisungen genau einzuhalten. Verwendungszwecke und
Handlungen, von denen in der Bedienungsanleitung
abgeraten oder vor denen gewarnt wird, sind unbedingt zu vermeiden.
Das Produkt ist nur für den privaten und nicht für
den gewerblichen Gebrauch bestimmt. Bei missbräuchlicher und unsachgemäßer Behandlung,
Gewaltanwendung und bei Eingriffen, die nicht
von unserer autorisierten Service-Niederlassung
vorgenommen wurden, erlischt die Garantie.
Garantiezeit und gesetzliche
Mängelansprüche
Die Garantiezeit wird durch die Gewährleistung
nicht verlängert. Dies gilt auch für ersetzte und
reparierte Teile. Eventuell schon beim Kauf vorhandene Schäden und Mängel müssen sofort nach
dem Auspacken gemeldet werden. Nach Ablauf
der Garantiezeit anfallende Reparaturen sind
kostenpflichtig.
■ 34 │ DE
│AT│
CH
SDBE 2600 A1
Abwicklung im Garantiefall
Um eine schnelle Bearbeitung ihres Anliegens
zu gewährleisten, folgen Sie bitte den folgenden
Hinweisen:
▯ Bitte halten Sie für alle Anfragen den Kassenbon
und die Artikelnummer (z. B. IAN 12345) als
Nachweis für den Kauf bereit.
▯ Die Artikelnummer entnehmen Sie bitte dem
Typenschild, einer Gravur, auf dem Titelblatt
ihrer Anleitung (unten links) oder als Aufkleber
auf der Rück- oder Unterseite.
▯ Sollten Funktionsfehler oder sonstige Mängel
auftreten kontaktieren Sie zunächst die nachfolgend benannte Serviceabteilung telefonisch
oder per E-Mail.
▯ Ein als defekt erfasstes Produkt können Sie dann
unter Beifügung des Kaufbelegs (Kassenbon)
und der Angabe, worin der Mangel besteht und
wann er aufgetreten ist, für Sie portofrei an die
Ihnen mitgeteilte Service Anschrift übersenden.
Auf www.lidl-service.com können Sie
diese und viele weitere Handbücher,
Produktvideos und Software herunterladen.
Importeur
Bitte beachten Sie, dass die folgende Anschrift
keine Serviceanschrift ist. Kontaktieren Sie zunächst
die benannte Servicestelle.