Siemens 7XV5810 0BA00, 7XV5810 0CA00 Operating Instructions Manual

Wide-range power supplies

7XV5810 0BA00 (24 V)

7XV5810 0CA00 (5 V)

Operating Instructions

C53000-B1140-C602-1

Table of content

1 GENERAL INSTRUCTIONS ......................................................................................................... 3

1.1 Safety Notes ................................................................................................................................ 4

1.2 General hints ............................................................................................................................... 5

1.3 Customer Support ....................................................................................................................... 5

1.4 Statement of Conformity .............................................................................................................. 6

1.5 Further Standards ....................................................................................................................... 6

1.6 Used Symbols ............................................................................................................................. 6

1.7 Exclusion of liability ..................................................................................................................... 7

1.8 Copyright ..................................................................................................................................... 7

1.9 Operating Instructions ................................................................................................................. 8

1.10 Scope of Application ............................................................................................................... 8

1.11 Description of the functional unit ............................................................................................. 8

1.12 In case of a short-circuit .......................................................................................................... 8

1.13 Switching off the device .......................................................................................................... 8

1.14 Installation ............................................................................................................................... 8

1.15 Connection ................ ............................................................................... ............................... 9

1.16 Commissioning ........................................................................................................................ 9

1.17 Maintenance ........................ .................. .................. .................. .................. ..........................10

2 TECHNICAL DATA ............................................................................................ .... ..... ......... ...... 11

2.1 Power supply 7XV5810 0BA00 (24 V) ......................................................................................11

2.2 Power supply 7XV5810 0CA00 (5 V) ........................................................................................12

2.3 Combined specifications ...........................................................................................................13

2.4 Dimension Drawings .................................................................................................................18

2.5 Connection terminals 7XV5810-0BA00 (24 V) ..........................................................................19

2.6 Connection terminals 7XV5810-0CA00 (5 V)............................................................................19

2.7 Ordering Data ............................................................................................................................20

Figures

Figure 1: Dimension Drawings (in mm) ................................................................................................. 18

Tables

Table 1: Connection terminals for the 24 V wide-range power supply ................................................. 19

Table 2: Connection terminals for the 5 V wide-range power supply ................................................... 19

Table 3: Ordering Data of the wide-range power supplies .................................................................... 20

Seite 2 von 20 Operating Instructions 7XV5810 0xA00

C53000-B1100-C602-1

1 General Instructions

This manual includes the information required for the normal use of the products
described therein. It is intended for technically qualified personnel who has been
specially trained or has special knowledge in the fields of protection-,
instrumentation-, control-, and automatic control engineering (called automation in
the following).
The knowledge and the technically correct translation of the safety instructions and
warnings included in this manual are a prerequisite for the safe installation and
commissioning, as well as for safety during operation and maintenance, of the
product described. Only qualified personnel, as defined in the following explanation,
possess the technical knowledge required to interpret correctly and to put into action
for each individual case the safety instructions and warnings given in this document
in a general manner.

This manual is an integral part of the scope of delivery. However, it cannot take into
account every detail on all types of the described product and also every possible
case regarding installation, operation or maintenance. If further information is desired
or in case special problems should arise, which are not treated adequately in this
document, it is possible to obtain additional details from the local Siemens office or
from the addresses stated in the back of this manual.

Additionally, we point out that the content of this product documentation is not part of
or modifies any previous or existing agreement, promise, or legal relationship.

All obligations by Siemens result from the respective purchase order which also
includes the complete and exclusively valid warranty provision. The contractual
warranty regulations are neither extended nor limited by the statements in this
document.

7XV5810 0xA00 Operating Instructions Seite 3 von 20

C53000-B1140-C602-1

1.1 Safety Notes

These operating instructions contain notes that are to be complied with for your
personal safety as well as to avoid property damages. These notes are marked by a
triangular warning symbol and the different degrees of danger are categorized as
follows:

Danger

Disregard of the corresponding precautionary measures will
cause death, severe bodily injury or considerable property
damage.

Warning

Disregard of the corresponding precautionary measures
may cause death, severe bodily injury or considerable
property damage.

Attention

Disregard of the corresponding precautionary measures
may lead to slight bodily injury or minor property damage

Note

Shall draw your attention to special information on the
product, product handling or the corresponding section of
the documentation.

Qualified personnel

Commissioning and operation of the equipment is to be
performed by qualified personnel only. In the context of
safety notes in this manual, the term qualified personnel
refers to persons authorized to perform commissioning,
grounding and labelling of devices, systems and electrical
circuits.

Seite 4 von 20 Operating Instructions 7XV5810 0xA00

C53000-B1100-C602-1

1.2 General hints

Enclosure

The enclosure must comply with the requirements for the
fire protection enclosure according to the standard
EN 60950.

Warning

This device is designed to be used in enclosures or
closed rooms. Operating the devices outside of the
enclosures can lead to electro-magnetic disturbances
and – in case of a defect – to a fire hazard.

Warning

The device must be operated only within the scope of its
intended use according to these operating instructions
and in connection with third-party equipment or
compounds recommended or accepted by Siemens.
Faultless and safe operation of the product require
proper transport, storage, mounting and installation as
well as careful operation and maintenance.

1.3 Customer Support

For any questions concerning your system, please contact your Siemens
representative. The Siemens Customer Support Center provides around-the-clock
support.

Phone: [phone]

Fax: [phone]

Internet: http://www.siprotec.com

E-Mail: [e-mail]

7XV5810 0xA00 Operating Instructions Seite 5 von 20

C53000-B1140-C602-1

1.4 Statement of Conformity

Low-voltage Directive 2014/35/EU

EMC Council Directive 2014/30/EU

This conformity has been established by means of tests conducted by
Siemens AG according to the Council Directive in agreement with the
generic standard EN 60255-26 for the EMC directives, and with the
standard EN 61010-1 for the low-voltage directive.

1.5 Further Standards

This product is UL-certified, based on the technical data acc. to Standard UL 61010­1, third edition; UL File No.: E228586

Mea suring 
Eq ui pm en t

E228586

1.6 Used Symbols
Nr. Symbol Description

1

2

3

4

5

6

7

Direct current: IEC 60417-5031

Alternating current: IEC 60417-5032

Direct and alternating current: IEC 60417-5033

Earth (ground) terminal: IEC 60417-5017

Protective conductor terminal: IEC 60417-5019

Caution, risk of electric shock

Caution, risk of danger: ISO 7000-0434

Protective Insulation IEC 60417-5172

8

9

Safety Class II devices

Guideline 2002/96/EC for electrical and electronic old devices

Seite 6 von 20 Operating Instructions 7XV5810 0xA00