LC-24LE155M
LED BACKLIGHT TV
OPERATION MANUAL
Supplied accessories
Remote control unit |
“AAA” size battery (g2) |
Operation manual |
||
|
|
|
|
|
Stand unit
Stand base |
Post |
Screws (g4) |
Contents
|
Page |
Supplied accessories ........................... |
1 |
Dear SHARP customer......................... |
2 |
Important Safety Precautions ............. |
2 |
Trademarks........................................... |
2 |
Attaching the stand .............................. |
3 |
Antenna connection ............................. |
3 |
Connecting external devices............... |
4 |
Remote control unit ............................. |
5 |
Part names ............................................ |
6 |
Turning the TV on/off ........................... |
6 |
Initial auto installation.......................... |
7 |
Selecting a preset AV mode ................ |
7 |
Menu operation..................................... |
7 |
Page |
|
Programme setup................................. |
7 |
Picture menu......................................... |
8 |
Audio menu ........................................... |
9 |
ECO menu ........................................... |
10 |
Setup menu ......................................... |
10 |
Option menu ....................................... |
11 |
Colour adjustment and still image.... |
12 |
ECO mode ........................................... |
12 |
Timer.................................................... |
12 |
USB Media Player............................... |
13 |
Appendix ............................................. |
15 |
Specifications ..................................... |
16 |
LC-24LE155M_F917_EN.indd 1
Printed in Malaysia TINS-F917WJZZ 13P07-MA-NP
1
Downloaded from www.Manualslib.com manuals search engine
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product.
Important Safety Precautions
•Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product.
•Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.
•Do not place vases or any other water-fi lled containers on this product. The water may spill onto the product causing fi re or electric shock.
•Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
•When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven fl oor surface can cause the product to fall from the cart.
•Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insuffi cient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.
•The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
•Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifi ers).
•To prevent fi re, never place any type of candle or naked fl ames on the top or near the TV set.
•To prevent fi re or shock hazard, do not place the AC power cord under the TV set or other heavy items.
•Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special care near children and pets.
•The LCD panel is a very high technology product with 1,049,088 pixels, giving you fi ne picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fi xed point of blue, green or red.
This is within product specifi cations and does not constitute a fault.
•Precautions when transporting the TV
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the TV by two people holding it with two hands — one hand on each side of the TV.
•Do not display a still picture for a long time, as this could cause an afterimage to remain.
•Install the product on the place where the AC cord can be unplugged easily from the AC outlet.
•Do not forcibly or accidentally pull both the power cord and DC cable connected to the AC adaptor. Both cables might get stretched, broken, loosed or tensed. Such conditions may cause a fi re break out or an electric shock.
Trademarks
•The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
•LC_LCFONT+and LC logo mark are registered trademarks of SHARP Corporation. This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on an LCD screen. However, other non-LCD fonts are used for displaying some screen pages.
2
6/7/2013 1:55:51 PM
Attaching the stand
•Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1Confi rm the screws supplied with the TV.
Screws (m4)
(used in step 1 and 3)
2 Insert and hook post into stand base slot holes. (1)
Fix the post using short screw.
3 Insert the stand base to the stand post on the bottom of the TV. (2)
Screw
4 Insert and tighten the 3 screws into the 3 holes on the bottom of the stand base. (3)
NOTE |
|
• To detach the stand, perform the steps in reverse order. |
|
• Do not attach or detach the stand without holding it. Doing |
Soft cushion |
so can cause the stand to fall, resulting in serious personal |
Screw driver |
injuries as well as damage to the stand. |
Antenna connection
Connect antenna cable to the antenna terminal
or
If your outdoor antenna uses a 75-ohm coaxial |
If your outdoor antenna uses a 300-ohm twin- |
cable with a standard DIN45325 plug (IEC |
lead fl at feeder, connect a 300-ohm to 75-ohm |
169-2), plug it into the antenna jack at the rear of |
impedance converter and plug it into the antenna |
the set. |
jack at the rear of the set. |
CAUTION
•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.
3
LC-24LE155M_F917_EN.indd 2
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from INPUT on the remote control unit or INPUT on the TV.
CAUTION
•To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box), PC or other external equipment.
•Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using the INPUT 2 or INPUT 3 terminals.
When using component cable |
When using composite cable |
||
(commercially available) |
(commercially available) |
||
|
|
|
|
or
VCR/Game
console/Camcorder
VCR/Game
console/Camcorder
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the INPUT 1 (HDMI) or INPUT 2 terminals when connecting to a DVD player/Digital TV STB (Set Top Box) and other audiovisual equipment.
When using HDMI-certified cable |
When using component cable |
(commercially available) |
(commercially available) |
DVD player/ |
|
Digital TV STB |
|
(Set Top Box) |
|
|
DVD player/Digital |
|
TV STB (Set Top Box) |
Connecting a PC |
Connecting a USB device |
You can use the INPUT 1 (HDMI) terminal when |
Connect a USB device to the TV. |
connecting to a PC. |
|
PC
CAUTION
•Do not disconnect a USB device from the TV while transferring fi les, when a screen is in “USB” mode.
4
6/7/2013 1:55:52 PM
Downloaded from www.Manualslib.com manuals search engine
Remote control unit
1 |
12 |
|
2 |
TIMER |
|
13 |
||
3 |
||
|
||
4 |
|
|
5 |
14 |
|
6 |
||
|
||
7 |
15 |
|
|
16 |
|
8 |
17 |
|
9 |
|
|
10 |
18 |
|
11 |
|
LCDTV
GB104WJSA
1POWER (STANDBY/ON)
To switch the power on and off. (See page 6.)
2DISPLAY
Display the channel or input information.
3TIMER
Set the Sleep Timer and Reminder. (See page 12.)
40 – 9
Set the channel.
5A (Flashback)
Press A to return to the previous selected channel or external input mode.
6AV MODE
Select an audio and video setting. (See page 7.)
7VOLk/VOLl
Set the volume.
(VOLk) Increase the volume. (VOLl) Decrease the volume.
8e (Mute)
Press e sMutes sound.
Press e again sRestores sound.
Mute will be cancelled after 30 minutes. However, the TV will not suddenly output loud sound as the volume level will
be set to 0 automatically. Increase the volume level by pressing VOL k.
9a/b/c/d(Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
10 COLOUR ADJ. (FREEZE)
Freeze a motion picture on the screen and adjust the colour tone of the still image. (See page 12.)
11 Colour (Red/Green/Yellow/Blue)
The coloured buttons are correspondingly used to select the coloured items on the screen.
12ECO
Reduce overall power consumption based on user preferences. (See page 12.)
13PHOTO
Display your pictures directly on the TV screen. (See page 13.)
14INPUT (INPUT SOURCE)
Select an input source.
15CHr/CHs
TV input mode: Select the channel. (CHr) Increase the channel number. (CHs) Decrease the channel number.
16MPX
Select the sound multiplex mode.
17MENU
Display the menu screen.
18RETURN
MENU mode: Return to the previous menu screen.
Inserting the batteries
Before using the TV for the fi rst time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1 Open the battery cover. 2 Insert the two supplied “AAA” size |
3 Close the battery cover. |
batteries. |
|
•Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
CAUTION
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fi re or the like.
5
LC-24LE155M_F917_EN.indd 3
Part names
TV (Front)
Remote control sensor 
POWER indicator
Light off |
Power off. |
Lighted (Red) |
The TV is in standby mode. |
Lighted (Green) |
The TV is on. |
TV (Rear)
|
|
|
|
1 |
POWER (On/Off) button |
|
|
|
|
2 |
MENU button |
|
|
|
|
3 |
INPUT button |
|
|
|
|
4 |
Channel up (r)/down (s) buttons |
|
|
|
|
5 |
Volume up (e)/down (f) buttons |
|
|
|
|
6 |
USB terminal* |
|
|
|
|
7 |
INPUT 1 (HDMI) terminal |
|
|
|
|
8 |
SERVICE ONLY terminal** |
|
|
|
|
9 |
INPUT 3 terminals |
|
|
|
1 |
10 /AUDIO output (R/L) terminal |
|
6 |
|
USB |
11 |
Antenna input terminal |
|
|
|
|
12 |
INPUT 2 (COMPONENT/AV INPUT) |
|
|
|
|
2 |
||
|
|
|
|
terminals |
|
|
|
|
|
|
|
7 |
|
|
3 |
|
|
|
|
|
10 |
|
|
8 |
SERVICE |
|
4 |
|
|
ONLY |
|
|
|
||
|
|
|
11 |
|
|
9 |
|
|
5 |
|
|
|
|
|
|
|
|
|
|
|
12 |
|
|
* USB terminal use for USB media player. (See page 13.)
**Usually do not connect anything to this terminal as it reserved only for service personnel.
•The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Turning the TV on/off
Turning on/off the power
•To turn on the power
Press POWER on the TV or remote control. (After a few seconds, an image appears with sound.)
•To turn off the power
Switch it off by pressing POWER on the TV or remote control.
NOTE
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
•Minor power is consumed when the unit is in standby mode.
6
6/7/2013 1:55:59 PM
Downloaded from www.Manualslib.com manuals search engine
Loading...