HDA 200 Audiometric Headphone
Closed dynamic headphones designed for extended high frequency testing.
Features
♦Excellent passive attenuation (based on Peltor TM Ear Defenders)
♦Very high quality sound reproduction
♦Convenient single sided cable
♦Padded headband and additional adjustable/removable cushions for increased comfort
♦Soft, replaceable circumaural ear pads
♦Color coded ear cups, right (red) left (blue)
HDA200 is PTB approved. Physikalisch-Technische Bundesanstalt, Braunschweig, Germany. PTB is equivalent to the National Bureau of Standards.
HDA 200 Frequency Response Test Conditions
•All measurements are done on a calibrated coupler B&K 4153 (artificial ear) with the standard cone YJ0304 above the adapter plate, type DB 0843.
•The pressure of the headband shall be 10N ± 1N.
•The RMS input voltage to the headphone is 0.5 V.
•The measurements are done with steady state sine wave signals.
•The output impedance of the signal source shall be <1 Ohm.
•Climatic conditions:
Temperature
Humidity
Atmospheric pressure
Technical Data
|
Frequency response |
< 20 to > 20,000 Hz |
||
|
PTB calibrated |
see table |
||
|
|
|
||
|
Transducer principle |
dynamic, closed |
||
|
|
|
|
|
|
Nominal impedance |
40 Ohm |
|
|
|
|
|
||
|
Characterisitic SPL |
100 dB at 1 kHz, 1 mW |
||
|
|
|
|
|
|
Max permanent load |
500 mW |
|
|
|
|
|
|
|
|
Coupling |
|
circumaural |
|
|
|
|
|
|
|
Caliper pressure |
10 N |
|
|
|
|
|
|
|
|
Weight (with cable) |
330 g |
|
|
|
|
|
||
|
Cable approx. 3 m, |
single-sided, open-ended |
||
|
|
|
|
|
|
Connection |
yellow |
+ L |
|
|
|
|
black |
– L |
|
|
|
red |
+ R |
|
|
|
white |
– R |
|
|
|
|
|
|
|
|
|
|
|
Standard |
SPL |
Passive |
Maximum SPL |
frequencies (dB 20µPa) |
attenuation |
(<10 min. @ |
||
|
(Hz) |
@ .5 Vrms |
(dB) |
5 V RMS) |
125 |
112.5 |
14.3 |
132 ± 3 |
|
250 |
113.0 |
15.9 |
132 ± 3 |
|
500 |
112.0 |
22.5 |
132 ± 3 |
|
750 |
111.0 |
- |
131 ± 3 |
|
1,000 |
108.5 |
28.6 |
129 ± 3 |
|
2,000 |
104.0 |
- |
124 ± 3 |
|
3,000 |
104.0 |
32.0 |
124 ± 3 |
|
4,000 |
104.0 |
45.7 |
124 ± 3 |
|
5,000 |
106.5 |
- |
127 ± 3 |
|
6,000 |
107.5 |
- |
125 ± 3 |
|
8,000 |
105.5 |
43.8 |
125 ± 5 |
|
9,000 |
105.0 |
- |
123 ± 5 |
|
10,000 |
102.5 |
- |
122 ± 5 |
|
11,200 |
102.0 |
- |
123 ± 5 |
|
12,500 |
103.0 |
- |
118 ± 5 |
|
14,000 |
98.5 |
- |
119 ± 5 |
|
16,000 |
100.0 |
- |
120 ± 5 |
|
|
|
|
|
|
All data are influenced by temperature, humidity and static pressure.
Sennheiser Electronic Corporation One Enterprise Drive PO Box 987, Old Lyme, CT 06371 Tel: 860-434-9190 Fax: 860-434-1759 Web site: www.sennheiserusa.com