SamsungTouchscreen Door Lock
User Guide SHS-3320
Please review all included documentation and use the product as intended. Safety precautions must be followed to avoid personal injury or property damage.
Touchscreen
Door Lock
Co
| Table of Contents |
|
Introduction & Helpful Tips |
2 |
Installation |
3 |
Components & Tools |
3 |
Door Preparation |
4-5 |
Installing Lock |
6-7 |
Programming |
8 |
Basic Lock Operation Overview |
8 |
Programming Features & Definitions |
9-12 |
Programming User PIN Codes & User Cards |
13-14 |
Security Functions |
15 |
Miscellaneous |
16 |
Miscellaneous Information |
16 |
Troubleshooting |
17-18 |
User Registration Table |
19 |
Product Specifications |
20 |
Warranty |
21-22 |
Drilling Template |
23-25 |
| Introduction
Congratulations on the purchase of your Samsung Touchscreen Door Lock! Your lock has a touch sensitive number display pad and optionally a 13.56MHz Card reader. Up to 70 users can be registered to gain access with unique Codes or Access Cards (supports ISO14443A type).
The touchscreen makes it convenient to enter the code and the Randomizer function helps prevent lockpicking using fingerprint traces on the touchscreen. Other convenient functions such as Automatic Locking / Sound Setting / Out-of-Home Security, etc. provide advanced security and peace of mind.
You can unlock the door using video intercom’s monitor after connecting a Samsung video intercom. (Refer to page 6 for connection diagram to a video intercom).
| Helpful Tips
Do not attempt to repair the product yourself.
Change your codes regularly to ensure the security of your codes.
Minimize the lock’s exposure to moisture including wet hands and direct contact with liquids.
Do not exert excessive force or use sharp instrument on the touchscreen. Insert the batteries according to correct polarity.
When the low-battery warning sounds, replace all batteries immediately. Do not mix old batteries with new batteries.
Use soft, dry cloth to clean the lock and avoid cleaning with water, alcohol or other chemicals.
mponents & Tools
Touchscreen
Door Lock
Installation
| Components & Tools
Components
● Exterior Unit |
● Screw Pack (4 types) |
● Interior Unit |
● Adjustable Deadbolt |
● Interior Mounting Plate |
(2-3/8˝~2-3/4˝, 60mm~70mm) |
● Strike |
● Magnetic Sensor |
● 4 AAAlkaline Batteries |
● 3 Keys |
● 4 User Cards or Key Fobs |
|
● User Guide |
|
Parts Drawings |
|
Exterior Unit |
|
Interior Unit |
Interior Mounting |
|
|
|
|
|
Plate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable |
Strike |
Magnetic Sensor |
Deadbolt |
|
|
Tools
Door Preparation |
Lock Installation |
● 2-1/8˝(54mm) hole saw |
● #2 Phillips screwdriver |
● 1˝(25mm) hole saw |
● Drill |
● 1-3/8”(35mm) hole saw |
|
● 3/8˝(10mm) drill bit |
|
● 1/8˝(2.5mm) drill bit |
|
● Chisel and hammer |
|
Touchscreen
Door Lock
| Door Preparation
Step 1. Check the Door Status
1)This lock supports door thickness of 1-7/32˝ to 1-9/16˝ (31 to 40 mm).
2)Using the provided lock template, ensure that there are no obstructions that would prevent installing the lock properly.
3)Take note of which orientation the deadbolt will need to be installed, left hand or right hand.
Left-handed Door
When viewed from the Outside, the hinge is on the left.
Right-handed Door
When viewed from the Outside, the hinge is on the right. Please, be aware of that there has be more than 50mm gap between the door frame and the external power contact to place the 9V battery for temporary access.
Right Trigger
Right-handed Setting
Connect the magnetic sensor to ‘Right Trigger’.
Left-handed Setting
Connect the magnetic sensor to ‘Left Trigger’.
The hand type is not set by default and it is set to the direction where the magnetic is detected.
In order to change the hand type when it is already set, change the connection of the magnetic sensor.
And press the [OPEN/CLOSE] button while the magnet is detected.
Note: Please, cut the tail of the rubber pad to the direction where magnetic sensor is placed.
Step 2. Mark on the Door
Check the location and direction of the deadbolt, attach the drilling template (page 23) on the side of the door, and mark on it with a pen.
Align the horizontal line across the door.
Align the vertical line over the door.
Mark the centers of the holes with the drilling template.
Mark the centerline of the deadbolt by aligning it with the vertical line.
Touchscreen
Door Lock
Step 3. Drilling
Drill a 2-1/8˝ (54 mm) diameter hole through the door, as indicated on the template, using a hole saw.
Drill a 1-3/8˝ (35 mm) diameter hole through the door, as indicated on the template, using a hole saw.
Drill a 1˝ (25 mm) mortise hole using a hole saw.
Drill strike plate holes using a drill bit (1/8˝, 2.5 mm).
35mm
25mm |
54mm |
|
|
|
2.5mm |
Step 4. Strike Plate Installation
1)Using the template, locate the center horizontal line for the deadbolt hole, which lines up with the center of the 2-1/8˝ hole, and draw a horizontal line on the door frame to mark where you will make the deadbolt mortise hole.
2)Measure half the thickness of the door. Now, measure that distance from where the door stops
at the frame when the door is closed toward the |
FH+ T4 x 15 |
|
door jamb and mark a straight, vertical line the |
||
|
||
length of the door strike plate. Draw a horizontal |
|
|
line from the mark you made in Step 1 toward |
|
|
the vertical line. Where both lines cross, make |
|
|
a 1˝ (25 mm) diameter hole, 1/2˝ (13 mm) in |
|
|
depth. |
|
3) Align the holes of the strike plate with the vertical line. Trace the outline of the strike plate and mortise with a 1/16˝ (1.6 mm) indentation.
Attach the strike plate with the 2 screws provided. (T4 x 15: for wooden door, U10-24 x 9: for metal door)
|
|
|
Touchscreen |
|
|
|
Door Lock |
| |
Installing lock |
Inside |
|
|
Outside |
|
|
|
2 |
3 |
7 |
|
|
|
6a |
|
|
|
Inside Unit Screws |
|
|
4 |
|
|
|
5 |
6b |
|
1 |
|
|
1. Installing the Deadbolt |
2. Setting the Blade |
|
|
|
Deadbolt |
|
|
|
Screws |
|
|
|
|
Horizontal Blade |
Vertical Blade |
|
|
RIGHT HANDED |
LEFT HANDED |
3. Installing the Mounting Plate |
4. Connecting the Cable |
||
|
3b |
|
|
|
Mounting Screws(3b, 3c) |
|
|
|
3a |
|
|
|
Mounting Screws(3a) |
|
|
|
3c |
|
|
5. Installing the Magnetic Sensor |
Connection for Video Intercom(Optional) |
||
|
3/4˝(20mm) |
||
|
|
|
|
|
|
|
|
Touchscreen
Door Lock
Procedures
1.Installing the Deadbolt
1)Insert the deadbolt from the side of the door.
2)Fix the deadbolt using two FH+T4 x 25 screws. (T4x25/T4x15: for wooden door, U10-24x9: for steel door)
2. Setting the Blade
(Ensure the Exterior Unit is aligned with the center hole of the deadbolt.)
While the deadbolt is in the open position, insert the blade of the exterior unit.
In the case of right-handed door, insert the blade horizontally. In the case of lefthanded door, insert the blade vertically.
3.Installing the Mounting Plate
1)Detach the Interior Mounting Plate from the Interior Unit.
2)First, install the two OH+M4 x 22 screws (3a) 90% of the way.
3)Next, fasten the Interior Mounting Plate with two FH+M5 x 20 screws (3b).
4)Align the Exterior Unit with the Interior Mounting Plate and then fasten the Interior Mounting Plate using
two FH+M5 x 20 screws (3c).
5)Tighten all screws on the Interior Mounting Plate 100%.
4.Connecting the Cable
5.Installing the Magnetic Sensor (page 4)
CAUTION: As the magnet fastened to the door-frame may not be detected if the gap between the magnets is too large, use the neck of the magnetic sensor to install the
sensor within 3/4″(20mm) of the magnet.
If the magnet is not detected, automatic lock does not work.
6.Fix screws for the Interior Unit.
1)Align the Interior Unit on to the Interior Mounting Plate, and check that the Thumbturn lever operates correctly. (Ensure cables are arranged neatly to prevent them from getting entangled or being compressed.)
CAUTION : Align the Interior Unit while the Thumbturn Lever is open position.
[Right-handed] [Left-handed]
2)Open the battery cover of the Interior Unit. (There are the screw grooves at the upper left and right corners.)
3)Using two FH+M4 x 8 screws, fasten the upper portion of the Interior Unit (6a).
4)Using two FH+M4 x 8 screws, fasten the lower portion of the Interior Unit (6b).
7.Install 4 Alkaline batteries.
A melody will sound when all 4 batteries are installed correctly.
CAUTION: Press the [OPEN/CLOSE] button to check whether the dead bolt works properly.
Connection for Video Intercom(Optional)
Connect the cable of video intercom to the Interior Unit.
SHS-3320 is compatible with SHT-3006 and other Samsung video intercom systems.
Touchscreen
Door Lock
Programming
| Basic Lock Operation Overview
Opening the Door with a PIN Code
Touch the
[Touchscreen].
|
|
→ |
The touchscreen will illu- |
Enter the PIN Code and |
The door opens within |
minate. (If the Random Se- |
press the [ ] button. |
one second. |
Successful: |
|
|
curity function is enabled, |
|
|
Ding dong dang dong |
|
|
press the 2 illuminated |
|
|
Failed: |
|
|
numbers.) |
|
|
|
|
Opening the Door with a Card
|
|
→ |
|
Touch the [Touch- |
Touch the Card reader with |
The door opens within one |
|
screen]. |
|||
an Access Card. |
second. |
||
|
Successful: |
|
|
|
Ding dong dang dong |
|
|
|
Failed: |
|
|
|
Ding dong ding dong |
|
Opening the Door in Double Authentication Mode
Touch the |
The touchscreen will |
[Touch- |
illuminate. |
screen]. |
(If the Random Security |
|
function is enabled, |
|
press the 2 illuminated |
|
numbers.) |
Enter the PIN Code and press the [] button.
Successful: Ding dong
Failed:
Ding dong ding dong
|
→ |
|
Touch the Card |
The door opens |
|
reader with an |
within one |
|
Access Card. |
||
second. |
||
Successful: |
||
|
||
Ding dong |
|
|
dang dong |
|
|
Failed: |
|
|
Ding dong |
|
|
ding dong |
|
Touchscreen
Door Lock
| Programming Features
Outside |
Inside |
Touchscreen
Registration Button
|
Open/Close Button |
Card Reader |
Thumbturn Lever |
|
Magnetic Sensor |
Emergency |
|
Cylinder |
Battery Cover |
|
|
Restart Button |
|
External Power |
|
Contact |
|
Symbols |
Description |
Symbols |
Description |
Press the [ ] button. It is Touch the [Touchscreen]. used to complete number
entry.
|
Press the [Registration] |
Enter the Master PIN Code |
|
button. It is used to change |
|
|
the PIN Code or set other |
(4~12 digits). Factory |
|
functions. |
Default: 1234 |
|
R: Press the [Registration] |
|
5 |
button briefly (~1 second) |
|
R5: Press the [Registration]
button for 5 seconds Press the Number buttons.
10
R10: Press the [Registration ] button for 10 seconds