Samsung LE32B530P7N User Manual [en, cs, pl]

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

	Country	Customer Care Centre	Web Site
	AUSTRIA	0810 - SAMSUNG (7267864, € 0.07/min)	www.samsung.com/at
	BELGIUM	02 201 2418	www.samsung.com/be
			www.samsung.com/be_fr
		800 - SAMSUNG (800-726786)	www.samsung.com/cz
	CZECH REPUBLIC	Distributor pro Českou republiku:
		Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
	DENMARK	8 - SAMSUNG (7267864)	www.samsung.com/dk
	EIRE	0818 717 100	www.samsung.com/ie
	FINLAND	30 - 6227 515	www.samsung.com/fi
	FRANCE	01 4863 0000	www.samsung.com/fr
	GERMANY	01805 - SAMSUNG (7267864, € 0.14/Min)	www.samsung.de
	HUNGARY	06 - 80 - SAMSUNG (7267864)	www.samsung.com/hu
	ITALIA	800 - SAMSUNG (7267864)	www.samsung.com/it
	LUXEMBURG	02 261 03 710	www.samsung.com/lu
	NETHERLANDS	0900-SAMSUNG (0900-7267864) (€ 0,10/Min)	www.samsung.com/nl
	NORWAY	3 - SAMSUNG (7267864)	www.samsung.com/no
	POLAND	0 801 1SAMSUNG(172678)	www.samsung.com/pl
		022 - 607 - 93 - 33
	PORTUGAL	808 20 - SAMSUNG (7267864)	www.samsung.com/pt
	SLOVAKIA	0800 - SAMSUNG (7267864)	www.samsung.com/sk
	SPAIN	902 - 1 - SAMSUNG (902 172 678)	www.samsung.com/es
	SWEDEN	0771 726 7864 (SAMSUNG)	www.samsung.com/se
	SWITZERLAND	0848 - SAMSUNG (7267864, CHF 0.08/min)	www.samsung.com/ch
	U.K	0845 SAMSUNG (7267864)	www.samsung.com/uk
	BELARUS	810-800-500-55-500	-
	TURKEY	444 77 11	www.samsung.com/tr
	ESTONIA	800-7267	www.samsung.com/ee
	LATVIA	8000-7267	www.samsung.com/lv
	LITHUANIA	8-800-77777	www.samsung.com/lt
	MOLDOVA	00-800-500-55-500	-
	KAZAHSTAN	8-10-800-500-55-500	www.samsung.com/kz_ru
	KYRGYZSTAN	00-800-500-55-500	-
	RUSSIA	8-800-555-55-55	www.samsung.ru
	TADJIKISTAN	8-10-800-500-55-500	-
	UKRAINE	8-800-502-0000	www.samsung.com/ua
			www.samsung.com/ua_ru
	UZBEKISTAN	8-10-800-500-55-500	www.samsung.com/kz_ru

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model

Serial No.

BN68-02363C-02

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and specifications may be changed without notice.

Digital TV Notice

1.Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cableTV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

2.DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB- C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric

Programme Guide), VOD (Video on Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.

3.Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.

4.Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business.

5.Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.

6.For more information, please contact your local Samsung customer care centre.

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

●Do not display a still image and partially still on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

●Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not

covered by the Warranty.

●Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

©2009 Samsung Electronics Co., Ltd. All rights reserved.

Contents
GENERAL INFORMATION
■Viewing the Control Panel.....................................................	2
■Accessories...........................................................................	2
■Viewing the Connection Panel..............................................	3
■Remote Control.....................................................................	5
■Installing Batteries in the Remote Control.............................	5
OPERATION
■Viewing the menus................................................................	6
■Placing Your Television in Standby Mode.............................	7
■Plug & Play Feature..............................................................	7
■Viewing the Display...............................................................	8
CHANNEL CONTROL
■Configuring the Channel Menu.............................................	8
■Managing Channels ...........................................................	11
PICTURE CONTROL
■Configuring the Picture Menu..............................................	13
■Using Your TV as a Computer (PC) Display.......................	15
■Setting up the TV with your PC...........................................	16
SOUND CONTROL
■Configuring the Sound Menu..............................................	17
■Selecting the Sound Mode..................................................	18

SETUP
■Configuring the Setup Menu...............................................	19
INPUT / SUPPORT
■Configuring the Input Menu.................................................	22
■Configuring the Support Menu............................................	22
ANYNET+
■Connecting Anynet+ Devices..............................................	24
■Setting Up Anynet+.............................................................	25
■Switching between Anynet+ Devices..................................	25
■Recording............................................................................	26
■Listening through a Receiver (Home Theatre)....................	26
■Troubleshooting for Anynet+...............................................	27
RECOMMENDATIONS FOR USE
■Teletext Feature..................................................................	28
■Installing the Stand..............................................................	29
■Installing the Wall Mount Kit................................................	29
■Using the Anti-Theft Kensington Lock.................................	30
■Securing the Installation Space...........................................	30
■Securing the TV to the Wall.................................................	31
■Troubleshooting..................................................................	32
■Specifications......................................................................	35

License

TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Symbol

N	O	T
Note	One-Touch Button	TOOLS Button	Press

English

English -

GENERAL INFORMATION

¦ Viewing the Control Panel

N The product colour and shape may vary depending on the model.

N You can use a button by pressing the side panel buttons.

1

2 3

	4
	5
6	876

1SOURCE E: Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTEREbutton on the remote control.

2MENU: Press to see an on-screen menu of your TV’s features.

3Y: Press to increase or decrease the volume.

In the on-screen menu, use the Ybuttons as you would use the ◄ and ► buttons on the remote control.

4Z: Press to change channels. In the on-screen menu, use the Zbuttons as you would use the ▼ and ▲ buttons on the remote control.

5P(POWER): Press to turn the TV on and off.

6SPEAKERS

7REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.

8POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.

¦ Accessories

			(M4 X L16)	(M4 X L14)
	Remote Control		Stand Screw	Stand Screw
	& Batteries	Stand			Cleaning Cloth	Cover-Bottom	Power Cord
			X 4	X 3
	(AAA x 2)
	● Owner’s Instructions			● Warranty card	●	Safety Guide

N Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

N Warranty card / Safety Guide (Not available in all locations)

N The items colour and shape may vary depending on the model.

English -

¦ Viewing the Connection Panel

[TV Side Panel]

@

4

!

1	2	3	4	5
				[TV Rear Panel]
0	9		8 7	6	Power Input

N The product colour and shape may vary depending on the model.

N Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

NWhen connecting an external device, match the colour of the connection terminal to the cable.

1DIGITAL AUDIO OUT (OPTICAL)

–Connects to a Digital Audio component such as a Home theatre receiver.

NWhen the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD / Blu-ray player or Cable / Satellite Box directly to an Amplifier or Home Theatre, not the TV.

2PC IN

–Connect to the video output jack on your PC.

3PC / DVI AUDIO IN

–Connect to the audio output jack on your PC.

–DVI audio outputs for external devices.

4HDMI IN 1(DVI), 2, 3

–Connects to the HDMI jack of a device with an HDMI output.

N No sound connection is needed for an HDMI to HDMI connection.

N Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter

(DVI to HDMI) for video connection and the PC / DVI AUDIO IN jacks for audio.

N You can also use the ports to connect to a PC.

N What is HDMI?

‘High Definition Multimedia interface’ allows the transmission of high definition digital video data and multiple channels of digital audio.

The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

NThe TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the PC / DVI AUDIO IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

English -

5ANT IN

–Connects to an antenna or cable TV system.

6KENSINGTON LOCK (depending on the model)

–The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV.

N The location of the Kensington Lock may be different depending on its model.

7AUDIO OUT [R-AUDIO-L]

–Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theatre.

8COMPONENT IN

–Connect component video cables (optional) to component connector (PR, PB, Y) on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.

–If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (PR, PB, Y) on your set.

–The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labelled Y, B-Y and R-Y or Y, Cb and Cr.

–Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

9EXT (RGB)

	Connector		Input		Output
		Video	Audio (L / R)	RGB	Video + Audio (L / R)
	EXT	O	O	O	Only TV or DTV output is available.

–Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

0 SERVICE

–Connector for software upgrades.

!AV IN [VIDEO] / [R-AUDIO-L]

–Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

–Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the

A/V device.

@COMMON INTERFACE Slot

When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.

The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating that the channel list is now updated.

N You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your

N hands since dropping the CI CARD may cause damage to it.

N Insert the CI-Card in the direction marked on it.

N The place of the COMMON INTERFACE Slot may be different depending on its model. N CAM is not supported in some countries and regions, check with your authorized dealer.

English -

¦ Remote Control

N You can use the remote control up to a distance of about 23 feet from the TV. N The performance of the remote control may be affected by bright light.

N The product colour and shape may vary depending on the model.

1POWER : Television Standby button.

2NUMERIC BUTTONS : Press to change the channel.

3FAV.CH : Used to display Favourites Channel Lists on the screen.

4Y: Press to increase or decrease the volume.

5SOURCE : Press to display and select the available video sources.

6INFO : Press to display information on the TV screen.

7TOOLS : Use to quickly select frequently used functions.

8CH LIST : Displays the Channel List on screen.

9COLOURS BUTTONS : Use these buttons in the Channel list menus etc.

! DUAL : Sound effect selection

@Use these buttons in the Anynet+ modes. (∏: This remote can be used to control recording on

Samsung recorders with the

Anynet+ feature)

# TV : Selects the TV mode directly.

$ PRE-CH : Enables you to return to the previous channel you were watching.

%MUTEM: Press to temporarily cut off the sound.

^P </P >: Press to change channels.

&MENU : Displays the main on-screen menu

*GUIDE : Electronic Programme Guide (EPG) display

( RETURN : Returns to the previous menu

) UP▲ / DOWN▼ / LEFT◄ / RIGHT►

/ ENTERE: Use to select on-screen menu items and change menu values.

aEXIT : Press to exit the menu.

bP.SIZE : Picture size selection

cSRS : SRS TS HD selection.

dSUBT. : Digital subtitle display

eAD : Audio Description selection.

Teletext Functions

50: Teletext mode selection (LIST / FLOF)

65: Teletext reveal

74: Teletext size selection

88: Teletext store

9Fastext topic selection

0/: Alternately select Teletext, Double, or Mix.

# :: Exit from the Teletext display $ 1: Teletext sub page

^2: Teletext next page

3: Teletext previous page

& 6: Teletext index ( 9: Teletext hold a 7: Teletext cancel

¦Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the figure.

2.Install two AAA size batteries.

N Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the compartment.

3.Replace the cover.

NRemove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

NIf the remote control doesn’t work, check the following:

●Is the TV power on?

●Are the plus and minus ends of the batteries reversed?

●Are the batteries drained?

●Is there a power outage or is the power cord unplugged?

●Is there a special fluorescent light or neon sign nearby?

English -

OPERATION

¦ Viewing the menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.

1.Press the MENU button.

The main menu is displayed on the screen. Its left side has icons: Picture, Sound, Channel , Setup, Input, Application, Support.

2.Press the ▲ or ▼ button to select one of the icons. Press the ◄ or ► button to access the icon’s sub-menu.

3.Press the ▲ or ▼ button to move to items in the menu. Press the ENTEREbutton to enter items in the menu.

4.Press the ▲/▼/◄/► button to change the selected items. N Press the RETURN button to return to the previous menu.

5.Press the EXIT button to exit from the menu.

Using the remote control buttons

Picture

Mode	: Standard ►
Backlight	: 7
Contrast	: 95
Brightness	: 45
Sharpness	: 50
Colour	: 50
Tint (G / R)	: G50 / R50

Button	Operations
MENUm	Display the main on-screen menu.
RUTURNR	Return to the previous menu.
EXITe	Exit the on-screen menu.

	Button	Operations
	▲/▼/◄/►/	Move the cursor and select an item.
		Select the currently selected item.
	ENTERE
		Confirm the setting.

Example: Setting the TV’s Brightness in the Picture Menu

Adjusting the Brightness to 80

1.Press the MENU button to display the menu.

2.Press the ENTEREbutton to select Picture.

3.Press the ▲ or ▼ button to select Brightness.

4. Press the ENTEREbutton.

Picture

Picture

Picture

Mode	: Standard ►
Backlight	: 7
Contrast	: 95
Brightness	: 45
Sharpness	: 50
Colour	: 50
Tint (G / R)	: G50 / R50

Mode	: Standard	►
Backlight	: 7
Contrast	: 95
Brightness	: 45
Sharpness	: 50
Colour	: 50
Tint (G / R)	: G50 / R50
Backlight	: 7
Contrast	: 95
Brightness	: 45	►
Sharpness	: 50
Colour	: 50
Tint (G / R)	: G50 / R50
Advanced Settings
Picture Options
Picture Reset

5.Press the ◄ or ► button until the brightness becomes 80.

6.Press the ENTEREbutton.

N Press the EXIT button to exit from the menu.

Brightness 45

UMove LAdjust EEnter RReturn

Brightness 80

UMove LAdjust EEnter RReturn

English -

¦ Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWERPbutton on the remote control.

N The screen is turned off and a standby indicator appears on your set. 2. To switch your set back on, simply press the POWERPbutton again.

NDo not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

¦Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1.Press the POWER button on the remote control. The message You can set the menu language. is displayed.

2.Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTERE button to confirm your choice.

Plug & Play

You can set the menu language.

Menu Language

: English

►

EEnter

3.Press the ◄ or ► button to select Store Demo or Home Use, then the ENTEREbutton.

N We recommend setting the TV to Home Use mode for the best picture in your home environment.

N Store Demo mode is only intended for use in retail environments.

N If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4.Press the ENTEREbutton. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTEREbutton to confirm your choice.

5.Press the ▲ or ▼ button to select Air or Cable, then press the ENTEREbutton.

N Air: Air antenna signal. Cable: Cable antenna signal.

6.Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTEREbutton to select Start. N Digital & Analogue: Digital and Analogue channels.

Digital: Digital channels.

Analogue: Analogue channels.

N When setting the antenna source to Cable, a step appears allowing you to set a value for the digital channel search. For more information, refer to Channel → Auto Store.

N The channel search will start and end automatically.

N Press the ENTEREbutton at any time to interrupt the memorization process.

N After all the available channels are stored, the message Set the Clock Mode. is displayed.

7.Press the ENTEREbutton. Press the ▲ or ▼ button to select Auto, then Press the ENTEREbutton.

N If you select Manual, Set current date and time is displayed.

N If you have received a digital signal, the time will be set automatically. If not, select Manual to set the clock. (refer to page 19)

8.The connection method to provide the best quality HD is offered. After confirming the method, press the ENTEREbutton.

9.The message Enjoy your TV! is displayed. When you have finished, press the ENTEREbutton.

If you want to reset this feature...

1.Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTEREbutton.

2.Press the ENTEREbutton again to select Plug & Play.

3.Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.

N If you want to change PIN number, use the Change PIN function. (refer to page 21)

N The Plug & Play feature is only available in the TV mode.

English -

¦ Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

O Press the INFO button to viewing the information.

Press the INFO button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings.

●▲, ▼: You can view other channel’s information. If you want to move to the currently selected channel, press ENTEREbutton.

●◄, ►: You can view the desired program’s information at the current channel.

NPress the INFO button once more or wait approximately 10 seconds and the display disappears automatically.

abc1	18:11 Thu 6 Jan
DTV Air	Life On Venus Avenue	18:00 ~ 6:00
15	Unclassified	' INFO

No Detaild Information

CHANNEL CONTROL

¦ Configuring the Channel Menu

Country

N The PIN number input screen appears. Enter your 4 digit PIN number.	Channel	Country	►
 Analogue Channel
		Auto Store
You can change the country for analogue channels.		Manual Store
 Digital Channel		Cable Search Option
		Now & Next Guide
You can change the country for digital channels.
		Full Guide
		Default Guide	: Full Guide

Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers.

N If a channel is locked using the Child Lock function, the PIN input window appears.

Air / Cable

Antenna source to memorize

●Digital & Analogue: Digital and Analogue channels.

●Digital: Digital channels.

●Analogue: Analogue channels.

When selecting ‘Cable → Digital & Analogue’or ‘Cable → Digital’

Provide a value to scan for cable channels.

●Search Mode → Full / Network / Quick N Quick

–Network ID: Displays the network identification code.

–Frequency: Displays the frequency for the channel. (Differs in each country)

–Modulation: Displays available modulation values.

–Symbol Rate: Displays available symbol rates.

N Scans for all channels with active broadcast stations and stores them in the TV’s memory.

NIf you want to stop Auto Store, press the ENTEREbutton.

The Stop Auto Store? message will be displayed.

Select Yes by pressing the ◄ or ► button, then press the ENTEREbutton.

English -

Manual Store

N Scans for a channel manually and stores it in the TV’s memory.

N If a channel is locked using the Child Lock function, the PIN input window appears.

Digital Channel

Manual store for digital channels.

N Digital Channel is only available in DTV mode.

●Channel: Set the Channel number using the ▲, ▼ or number (0~9) buttons.

●Frequency: Set the frequency using the number buttons.

●Bandwidth: Set the bandwidth using the ▲, ▼ or number (0~9) buttons. N When it has finished, channels are updated in the channel list.

Analogue Channel

Manual store for analogue channel.

●Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9) buttons.

●Colour System → Auto / PAL / SECAM / NTSC4.43: Sets the colour system value using the ▲ or ▼ button.

●Sound System → BG / DK / I / L: Sets the sound system value using the ▲ or ▼ button.

●Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number. N You can also select the channel number directly by pressing the number (0~9) buttons.

N If there is abnormal sound or no sound, reselect the sound standard required.

●Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.

●Store (When you store the channel and associated programme number): Set to OK by pressing the ENTEREbutton.

NChannel mode

–P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

–C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

–S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

Cable Search Option (depending on the country)

Sets additional search options such as the frequency and symbol rate for cable network searches. ● Frequency (Start ~ Stop): Displays the frequency for the channel.

● Modulation: Displays available modulation values.

● Symbol Rate: Displays available symbol rates.

Now & Next Guide / Full Guide

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.

NFor detailed procedures on using Now & Next Guide and Full Guide, refer to the descriptions on page 10.

OYou can also display the guide menu simply by pressing the GUIDE button. (To configure the Default Guide, refer to the descriptions.)

Now & Next Guide

For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.

Full Guide

Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time.

English -

Default Guide → Now & Next Guide / Full Guide

You can decide whether to display either the Now & Next Guide or the Full Guide when the GUIDE button on the remote control is pressed.

Channel List

For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions. O You can select these options by simply pressing the CH LIST button on the remote control.

Channel Mode

When press the P >/<button, Channels will be switched within the selected channel list.

Added Ch.

Channels will be switched within the memorized channel list.

Favourite Ch.

Channels will be switched within the favourite channel list.

Fine Tune

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually.

N Fine tuned channels that have been saved are marked with an asterisk ‘*’ on the right-hand side of the channel number in the channel banner.

N To reset the fine-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTEREbutton. N Only Analogue TV channels can be fine tuned.

Using the Now & Next Guide / Full Guide

Now & Next Guide

Full Guide

DTV Cable 900 f tn

2:10 Tue 1 Jun

DTV Cable 900 f tn

2:10 Tue 1 Jun

Freshmen On Campus

Freshmen On Campus

2:00 - 2:30

2:00 - 2:30

No Detailed Information

No Detailed Information

Now

Next

Today

2:00 - 3:00

3:00 - 4:00

1

f tn

Street Hypn..

No Information

1

f tn

Freshmen O..

2

ITV Play

Mint Extra

2

ITV Play

Mint Extra

3

Kerrang!

Loaded

No Information

3

Kerrang!

Loaded

4

Kiss

Fresh 40 with Dynamite MC

Kisstory

4

Kiss

Fresh 40 with Dynamite MC

5

oneword

The Distillery

No Information

5

oneword

The Distillery

No Information

▼ 6

Smash Hits!

Smash Hits! Sunday

▼ 6

Smash Hits!

Smash Hits! Sunday

Watch

INFO Information

■ Full Guide

■ Exit

Watch

INFO Information

■ Now/Next

■ +24 Hours

■ Exit

To...	Then...
Watch a programme in the EPG list	Select a programme by pressing the ▲, ▼, ◄, ► button.
Exit the guide	Press the blue button

If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTEREbutton is pressed again, press the ◄, ► button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone.

View programme information	Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.
	Then press the INFO button when the programme of your choice is
	highlighted.

The programme title is on the upper part of the screen centre.

Please click on INFO button for detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. “...” will be appeared if the summary is long.

Toggle between the Now & Next Guide and Full	Press the red button repeatedly.
Guide
In Full Guide
Scrolls backwards quickly (24 hours).	Press the green button repeatedly.
Scrolls forwards quickly (24 hours).	Press the yellow button repeatedly.

English - 10

¦ Managing Channels

Using this menu, you can Add / Delete or set Favourite channels and use the programme guide for digital broadcasts.

All Channels

Shows all currently available channels.

Added Channels

Shows all added channels.

Favourites

Shows all favourite channels.

Channels Added

All

824UKTV Gold

825UKTV style

		1	C --
	A
		2	C --
	A
		3 ♥	C --
	A
		4	C --
	A
		5	C --
	A
		6	C --
	A
		7	C --
	A
■Channel Type			■Zoom	■Select	TTools

OTo select the Favourites channels you have set up, press the FAV.CH button on the remote control.

Programmed

Shows all current reserved programmes.

NSelect a channel in the All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing the ENTEREbutton. Then you can watch the selected channel.

NUsing the Colour buttons with the Channel List

–Red (Channel Type): Toggle between your TV, Radio, Data / Other and All.

–Green (Zoom): Enlarges or shrinks a channel number.

–Yellow (Select): Selects multiple channel lists. You can perform the add / delete, add to Favourites / delete from Favourites, or lock / unlock function for multiple channels at the same time. Select the required channels and press the yellow button to set all the selected channels at the same time. The cmark appears to the left of the selected channels.

–TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer Viewing, Edit Channel Name, Sort, Edit Channel Number, Select All (or Deselect All), Auto Store menu. (The

Options menus may differ depending on the situation.)

NChannel Status Display Icons

●A : An analogue channel.

●c: A channel selected by pressing the yellow button.

●* : A channel set as a Favourite.

●(: A programme currently being broadcast.

●\ : A locked channel.

●): A reserved programme

Channel List Option Menu (in All Channels / Added Channels / Favourites)

N Press the TOOLS button to use the option menu.

N Option menu items may differ depending on the channel status.

Add / Delete

You can delete or add a channel to display the channels you want.

N All deleted channels will be shown on All Channels menu.

N A gray-coloured channel indicates the channel has been deleted.

N The Add menu only appears for deleted channels.

N You can also delete a channel from the Added Channels or Favourites menu in the same manner.

Add to Favourite / Delete from Favourite

You can set channels you watch frequently as favourites.

Channels Added

All

824UKTV Gold

825UKTV style

		1	C --	Delete
	A
		2	C --	Add to Favourite
	A			Lock
		3 ♥	C --	Timer Viewing
	A
				Edit Channel Name
		4	C --
	A			Sort
					▼
		5	C --
	A
		6	C --
	A
		7	C --
	A
■Channel Type			■Zoom	■Select	TTools

TPress the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favourite by selecting Tools

→ Add to Favourite (or Delete from Favourite).

N The ‘*’ symbol will be displayed and the channel will be set as a favourite.

N All favourite channels will be shown on Favourites menu.

English - 11

Lock / Unlock

You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is set to On. (see page 21)

N The PIN number input screen appears. Enter your 4 digit PIN number.

N The default PIN number of a new TV set is ‘0-0-0-0’. You can change the PIN, by selecting Change PIN from the menu.

N The ‘\’ symbol will be displayed and the channel will be locked.

Timer Viewing

If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a programme, set the current time first. (See page 19)

N Only memorized channels can be reserved.

N You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.

N Reserving a programme will be shown in the Programmed menu.

N Digital Programme Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can reserve a programme according to the procedures described above.

Edit Channel Name (analogue channels only)

Channels can labelled so that their call letters appear whenever the channel is selected.

N The names of digital broadcasting channels are automatically assigned and cannot be labelled.

Edit Channel Number (digital channels only)

You can also edit the channel number by pressing the number buttons on the remote control.

Sort (analogue channels only)

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

Select All / Deselect All

●Select All: You can select all the channels in the channel list.

●Deselect All: You can deselect all the selected channels.

NYou can only select Deselect All when there is a selected channel.

Auto Store

NFor further details on setting up options, refer to page 8.

N If a channel is locked using the Child Lock function, the PIN input window appears.

Channel List Option Menu (in Programmed)

You can view, modify or delete a reservation.

N Press the TOOLS button to use the option menu.

Change Info

Select to change a viewing reservation.

Cancel Schedules

Select to cancel a viewing reservation.

Information

Select to view a viewing reservation. (You can also change the reservation information.)

Select All

Select all reserved programmes.

Programmed	1 / 1 / 2009
	18:59	2	TV3		Information
	13:59	5	TV1		Change Info
					Cancel Schedules
	20:59	2	TV3		Select All
All	■Zoom	■Select	TTools	EInformation

English - 12

PICTURE CONTROL

¦ Configuring the Picture Menu

Mode

You can select the type of picture which best corresponds to your viewing requirements.

TPress the TOOLS button to display the Tools menu. You can also set the picture mode by selecting Tools → Picture Mode. Picture

Dynamic

Selects the picture for high-definition in a bright room.

Standard

Selects the picture for the optimum display in a normal environment.

Movie

Selects the picture for viewing movies in a dark room.

Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Picture

Your television has several setting options that allow you to control the picture quality.

● Backlight: Adjusts the brightness of LCD back light. ● Contrast: Adjusts the contrast level of the picture.

● Brightness: Adjusts the brightness level of the picture ● Sharpness: Adjusts the edge definition of the picture. ● Colour: Adjusts colour saturation of the picture.

● Tint (G/R): Adjusts the colour tint of the picture.

NSelect a picture mode to be adjusted first. The adjusted values are saved for each picture mode.

Mode	: Standard	►
Backlight	: 7
Contrast	: 95
Brightness	: 45
Sharpness	: 50
Colour	: 50
Tint (G / R)	: G50 / R50
Colour	: 50
Tint (G / R)	: G50 / R50
Advanced Settings		►

Picture Options

Picture Reset

NWhen you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted accordingly.

NIn analogue TV, Ext., AV modes of the PAL system, you cannot use the Tint (G/R) Function.

NIn PC mode, you can only make changes to Backlight, Contrast and Brightness.

NSettings can be adjusted and stored for each external device you have connected to an input of the TV.

NThe energy consumed during use can be significantly reduced if the brightness level of the picture is reduced, which will reduce the overall running cost.

Advanced Settings

Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings.

NAdvanced Settings is available in Standard or Movie mode.

N In PC mode, you can only make changes to Gamma and White Balance from among the Advanced Settings items.

Black Tone → Off / Dark / Darker / Darkest

You can select the black level on the screen to adjust the screen depth.

Dynamic Contrast → Off / Low / Medium / High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma

You can adjust the Primary Colour (Red, Green, Blue) Intensity.

Colour Space

Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the most natural colour.

●Native: Native Colour Space offers deep and rich colour tone.

●Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.

English - 13

White Balance

You can adjust the colour temperature for more natural picture colours.

●R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Colour ‘temperature’ in the light areas by changing the values of R, G, B. Recommended for advanced users only.

●Reset: The previously adjusted white balance will be reset to the factory defaults.

Flesh Tone

You can emphasize the pink ‘flesh tone’ in the picture.

N Changing the adjustment value will refresh the adjusted screen.

Edge Enhancement → Off / On

You can emphasize object boundaries in the picture.

Picture Options

N In PC mode, you can only make changes to the Colour Tone and Size from among the items in Picture Options.

Colour Tone → Cool / Normal / Warm1 / Warm2

You can select the most comfortable colour tone to your eyes.

N Settings can be adjusted and stored for each external device you have connected to an input of the TV.

N Warm1 or Warm2 is only activated when the picture mode is Movie.

Size

You can select the picture size which best corresponds to your viewing requirements.

T Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools → Picture Size. O You can select these options by simply pressing the P.SIZE button on the remote control.

●Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.

●16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

●Wide Zoom: Magnify the size of the picture more than 4:3.

●Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

●4:3: This is the default setting for a video movie or normal broadcasting.

●Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.

N Depending on the input source, the picture size options may vary. N The items available may differ depending on the selected mode.

N In PC Mode, only 16:9 and 4:3 mode can be adjusted.

N Settings can be adjusted and stored for each external device you have connected to an input of the TV.

N Temporary image retention may occur when viewing a static image on the set for more than two hours.

NWide Zoom: Press the ► button to Select Position, then press the ENTEREbutton. Press the ▲ or ▼ button to move the picture up / down. Then press the ENTEREbutton.

NZoom: Press the ► button to Select Position, then press the ENTEREbutton. Press the ▲ or ▼ button to move the picture up and down. Then press the ENTEREbutton. Press the ► button to Select Size, then press the ENTEREbutton. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTEREbutton.

NAfter selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the ◄ or ► button. Use the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select Reset, then press the ENTEREbutton. You can initialize the setting.

NIf you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscan function.

Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.

●16:9: Sets the picture to 16:9 wide mode.

●Wide Zoom: Magnify the size of the picture more than 4:3.

●Zoom: Magnify the size of the picture vertically on screen.

●4:3: Sets the picture to 4:3 normal mode.

N This function is available in Auto Wide mode.

N This function is not available in PC, Component or HDMI mode.

English - 14

Digital NR → Off / Low / Medium / High / Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

N When the signal is weak, select one of the other options until the best picture is displayed.

HDMI Black Level → Normal / Low

You can directly select the black level on the screen to adjust the screen depth.

N This function is active only when the external input connects to HDMI (RGB signals).

Film Mode → Off / Auto

The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality. N Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).

Picture Reset → Reset Picture Mode / Cancel

Resets all picture settings to the default values.

N Select a picture mode to be reset. The reset is performed for each picture mode.

●Reset Picture Mode: Current picture values return to default settings.

¦ Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1.First, click on ‘Control Panel’ on the Windows start menu.

2.When the control panel window appears, click on ‘Appearance and Themes’ and a display dialog-box will appear.

3.When the control panel window appears, click on ‘Display’ and a display dialogbox will appear.

4.Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution): Optimum-1920 X 1080 pixels

If a vertical-frequency option exists on your display settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

English - 15

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended.

 D-Sub and HDMI/DVI Input

	Mode	Resolution	Horizontal Frequency	Vertical Frequency	Pixel Clock Frequency	Sync Polarity
			(KHz)	(Hz)	(MHz)	(H / V)
	IBM	640 x 350	31.469	70.086	25.175	+/-
		720 x 400	31.469	70.087	28.322	-/+
	MAC	640 x 480	35.000	66.667	30.240	-/-
		832 x 624	49.726	74.551	57.284	-/-
		1152 x 870	68.681	75.062	100.000	-/-
	VESA CVT	720 x 576	35.910	59.950	32.750	-/+
		1152 x 864	53.783	59.959	81.750	-/+
		1280 x 720	44.772	59.855	74.500	-/+
		1280 x 960	75.231	74.857	130.000	-/+
		1280 x 720	56.456	74.777	95.750	-/+
	VESA DMT	640 x 480	31.469	59.940	25.175	-/-
		640 x 480	37.861	72.809	31.500	-/-
		640 x 480	37.500	75.000	31.500	-/-
		800 x 600	37.879	60.317	40.000	+/+
		800 x 600	48.077	72.188	50.000	+/+
		800 x 600	46.875	75.000	49.500	+/+
		1024 x 768	48.363	60.004	65.000	-/-
		1024 x 768	56.476	70.069	75.000	-/-
		1024 x 768	60.023	75.029	78.750	+/+
		1152 x 864	67.500	75.000	108.000	+/+
		1280 x 1024	63.981	60.020	108.000	+/+
		1280 x 1024	79.976	75.025	135.000	+/+
		1280 x 800	49.702	59.810	83.500	-/+
		1280 x 800	62.795	74.934	106.500	-/+
		1280 x 960	60.000	60.000	108.000	+/+
		1360 x 768	47.712	60.015	85.500	+/+
		1440 x 900	55.935	59.887	106.500	-/+
		1440 x 900	70.635	74.984	136.750	-/+
		1680 x 1050	65.290	59.954	146.250	-/+
	VESA GTF	1280 x 720	52.500	70.000	89.040	-/+
		1280 x 1024	74.620	70.000	128.943	-/-
	VESA DMT /	1920 x 1080p	67.500	60.000	148.500	+/+
	DTV CEA

N When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.

N The interlace mode is not supported.

N The set might operate abnormally if a non-standard video format is selected. N Separate and Composite modes are supported. SOG is not supported.

N Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080 or 1600x1200).

¦ Setting up the TV with your PC

NPreset: Press the SOURCE button to select PC mode.

Auto Adjustment

Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video signal.

The values of fine, coarse and position are adjusted automatically.

NThis function does not work in DVI-HDMI mode.

TPress the TOOLS button to display the Tools menu. You can also set the Auto Adjustment by selecting Tools → Auto Adjustment.

Picture

Brightness:	: 45
Sharpness	: 50
AutoAdjustment	►

Screen

Advanced Settings

Picture Options

Picture Reset

Screen

Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the centre of screen.

PC Position

Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset

You can replace all image settings with the factory default values.

English - 16

SOUND CONTROL

¦ Configuring the Sound Menu

Mode → Standard / Music / Movie / Clear Voice / Custom

You can select a sound mode to suit your personal preferences.

TPress the TOOLS button to display the Tools menu. You can also configure the sound mode by selecting Tools → Sound Mode.

Standard

Selects the normal sound mode.

Music

Emphasizes music over voices.

Sound

Mode	: Custom	►
Equalizer
SRS TruSurround HD	: Off
Audio Language	: - - -
Audio Format	: - - -
Audio Description
Auto Volume	: Off

Movie

Provides the best sound for movies.

Clear Voice

Emphasizes voice over other sounds.

Custom

Recalls your customized sound settings.

Equalizer

The sound settings can be adjusted to suit your personal preferences.

Mode

You can select a sound mode to suit your personal preferences.

Balance

Controls the balance between the right and left speakers.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment)

To adjust the level of different bandwidth frequencies

Reset

Resets the equalizer settings to the default values.

SRS TruSurround HD → Off / On

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

O Press the SRS button on the remote control to select Off or On.

Audio Language (digital channels only)

You can change the default value for audio languages. Displays the language information for the incoming stream.

N You can only select the language among the actual languages being broadcast.

N While viewing a digital channel, this function can be selected.

Audio Format → MPEG / Dolby Digital (digital channels only)

When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

N The Audio Format appears according to the broadcasting signal. N While viewing a digital channel, this function can be selected.

Audio Description (digital channels only)

This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the

Audio Description On or Off and control the volume.

O Press the AD button on the remote control to select Off or On.

English - 17

Audio Description → Off / On

Turn the audio description function on or off.

Volume

You can adjust the audio description volume.

NVolume is active when Audio Description is set to On.

Auto Volume → Off / On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

Speaker Select → External Speaker / TV Speaker

If you want to hear the sound through separate speakers, cancel the internal amplifier.

NThe volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker.

N If you select External Speaker in the Speaker Select menu, the sound settings will be limited.

Sound Reset → Reset All / Reset Sound Mode / Cancel

You can restore the Sound settings to the factory defaults.

¦ Selecting the Sound Mode

You can set the sound mode by pressing the DUAL button. When you press it, the current sound mode is displayed on the screen.

	Audio Type				Dual 1 / 2				Default
	Mono				MONO				Automatic change
A2 Stereo	Stereo			STEREO ↔ MONO
	Dual			DUAL 1 ↔ DUAL 2					DUAL 1
	Mono				MONO				Automatic change
NICAM	Stereo			MONO ↔ STEREO
Stereo	Dual			MONO ↔ DUAL 1					DUAL 1
					DUAL 2

N If the stereo signal is weak and an automatic switching occurs, then switch to the mono.

N This function is only activated in stereo sound signal. It is deactivated in mono sound signal.

N This function is only available in TV mode.

English - 18

SETUP

¦ Configuring the Setup Menu

Menu Language

You can set the menu language.

Time

Clock

Setting the clock is necessary in order to use the various timer features of the TV.

N The current time will appear every time you press the INFO button.

N If you disconnect the power cord, you have to set the clock again.

●Clock Mode

You can set up the current time manually or automatically.

–Auto: Set the current time automatically using the time from the digital broadcast.

–Manual: Set the current time to a manually specified time.

Setup

Plug & Play
Menu Language : English	►
Time
Broadcast
Security
General

NDepending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually.

N The Antenna or cable must be connected in order to set the time automatically.

●Clock Set

You can set the current time manually.

N Set up this item when you have set Clock Mode to Manual.

N You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.

Sleep Timer → Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 min

The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). N The TV automatically switches to standby mode when the timer reaches 0.

N To cancel the Sleep Timer function, select Off.

TPress the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer.

Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made. You must set the clock first.

● On Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.)

● Off Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.) ● Volume: Select the desired turn on volume level.

● Antenna: Select Air or Cable.

● Channel: Select the desired channel.

● Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.

N When Manual is selected, press the ► button to select the desired day of the week. Press the ENTEREbutton over the desired day and the cmark will appear.

NYou can set the hour, minute and channel by pressing the number buttons on the remote control.

NAuto Power Off

When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.

English - 19

Broadcast

Subtitle

You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. Normal under the menu is the basic subtitle and Hard of hearing is the subtitle for a hearing-impaired person.

●Subtitle → Off / On : Switches subtitles on or off.

●Mode → Normal / Hard of hearing: Sets the subtitle mode.

●Subtitle Language: Set the subtitle language.

NIf the programme you are watching does not support the Hard of hearing function, Normal automatically activates even though Hard of hearing mode is selected.

NEnglish is the default in cases where the selected language is unavailable in the broadcast.

NYou can select these options simply by pressing the SUBT. button on the remote control.

Digital Text → Disable / Enable (UK only)

If the programme is broadcast with digital text, this feature is enabled.

NMHEG (Multimedia and Hypermedia Information Coding Experts Group)

An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the

MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and network games.

Teletext Language

You can set the Teletext language by selecting the language type.

NEnglish is the default in cases where the selected language is unavailable in the broadcast.

Preference

●Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language

Using this feature, users can select one of the languages. The language selected here is the default when the user selects a channel.

If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the Language menu are automatically changed to the selected language.

The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary

Audio Language, or the Primary Teletext Language of the Preference menu.

Common Interface

●CI Menu

This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card.

●Application Info.

This contains information on CAM inserted in the CI slot and displays it.

N The Application Info inserting is about the ‘CI CARD’. You can install the CAM anytime whether the TV is ON or OFF.

1.Purchase the CI CAM module by visiting your nearest dealer or by phone.

2.Insert the ‘CI CARD’ into the CAM in the direction of the arrow until it fits.

3.Insert the CAM with the ‘CI CARD’ installed into the common interface slot.

(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)

4.Check if you can see a picture on a scrambled signal channel.

N CAM is not supported in some countries and regions, check with your authorized dealer.

English - 20

Security

N Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.

N The default PIN number of a new TV set is ‘0-0-0-0’. You can change the PIN by selecting Change PIN from the menu.

Child Lock → Off / On

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video and audio.

N You can lock some channels in Channel List. (refer to page 12) N Child Lock is available only in TV mode.

Parental Lock

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by a 4-digit PIN (Personal Identification Number) code that is defined by the user.

N The Parental Lock item differs depending on the country.

N When the Parental Lock is set, the ‘\’ symbol is displayed. N Allow All: Press to unlock all TV ratings.

Block All: Press to lock all TV ratings.

Change PIN

You can change your personal ID number that is required to set up the TV.

N If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to ‘0-0-0-0’: POWER(Off) → MUTE → 8 → 2 → 4 → POWER(On).

General

Game Mode → Off / On

When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.

N To disconnect the game console and connect another external device, cancel game mode in the setup menu.

N If you display the TV menu in Game Mode, the screen shakes slightly. N Game Mode is not available in regular TV and PC mode.

N If Game Mode is On:

–Picture mode is automatically changed to Standard and users cannot change the mode.

–Sound mode is automatically changed to Custom and users cannot change the mode. Adjust the sound using the equalizer.

NThe Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer settings to the factory defaults.

Energy Saving → Off / Low / Medium / High / Picture Off / Auto

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption.

If you select Picture Off, the screen is turned off and you can only hear the sound. Press any button to get out of Picture Off.

NIn the Tools menu, Picture Off function is not supported.

TPress the TOOLS button to display the Tools menu. You can also set the Energy Saving option by selecting Tools → Energy Saving.

Melody → Off / Low / Medium / High

A melody sound can be set to come on when the TV is powered On or Off.

NThe Melody does not play

–When no sound is output from the TV because the MUTE button has been pressed.

–When no sound is output from the TV because the (–) Volume button has been pressed.

–When the TV is turned off by Sleep Timer function.

English - 21

INPUT / SUPPORT

¦ Configuring the Input Menu

Source List

Use to select TV or other external input sources such as DVD / Blu-ray players / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.

OPress the SOURCE button on the remote control to view an external signal source. TV mode can be selected by pressing the TV button.

TV / Ext. / AV / Component / PC / HDMI1/DVI / HDMI2 / HDMI3

NYou can choose only those external devices that are connected to the TV. In the

Source List, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom.

N Ext. and PC always stay activated.

Input

Source List

Edit Name

NUsing the Colour buttons on the remote with the Source list

–Red (Refresh): Refreshes the connecting external devices.

–TOOLS (Tools): Displays the Edit Name and Information menus.

Edit Name

Name the device connected to the input jacks to make your input source selection easier.

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray / HD DVD / DMA

NWhen a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI PC in the Edit Name of the Input mode.

NWhen connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI or DVI PC in the Edit Name of the Input mode. In this case, a separate sound connection is required.

¦Configuring the Support Menu

Self Diagnosis

Picture Test

If you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still exists.

●Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s call centre for assistance.

Support

Self Diagnosis

►

Software Upgrade

HD Connection Guide

Contact Samsung

●No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual.

Sound Test

If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound through the TV. ‘Does the problem still exist with this sound test?’ appears on the screen.

N If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker in the Sound menu.

N The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.

●Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with the TV. Contact Samsung’s call centre for assistance.

●No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual.

Signal Information (digital channels only)

Unlike analogue channels, which can vary in reception quality from ‘snowy’ to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.

N If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.

English - 22

USB Drive

Software Upgrade
To keep your product up-to-date with new Digital Television features then software upgrades
are periodically broadcast as part of the normal Television signal. It will automatically detect
these signals and display the software upgrade banner. You are given the option to install the
upgrade.	TV Rear Panel

 BY USB

Insert a USB drive containing the firmware upgrade into TV. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will

turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the update is completed. When software is upgraded, video and audio settings you have made will return to their default (factory) settings.

We recommend you write down your settings so that you can easily reset them after the upgrade.

BY Channel

Upgrades the software using the broadcasting signal.

N If the function is selected during the software transmission period, this function searches for available software and downloads the software.

N The time required to download the software is determined by the signal status.

Standby Mode Upgrade

To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.

Alternative Software

To display the software version information.

HD Connection Guide

This menu presents the connection method that provides the optimal quality for the HD TV. Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call centre, product and software file download method.

English - 23

ANYNET+

¦ Connecting Anynet+ Devices

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.

To connect to a TV

TV

Anynet+ Device 1

Anynet+ Device 2

Anynet+ Device 3

HDMI 1.3 Cable

HDMI 1.3 Cable

HDMI 1.3 Cable

1.Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.

To connect to Home Theatre

			TV		Home Theatre			Anynet+ Device 1

	HDMI 1.3
	Cable			HDMI 1.3 Cable
	Optical Cable
	Anynet+ Device 2			Anynet+ Device 3
	HDMI 1.3 Cable	HDMI 1.3 Cable

1.Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.

2.Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.

NConnect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the

Home Theatre.

NWhen following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Blu-ray player or Cable/Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifi er or Home Theatre, not the TV.

N Connect only one Home Theatre.

N You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.

N Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.

N Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

English - 24

¦ Setting Up Anynet+

TPress the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools → Anynet+(HDMI-CEC).

Setup

Anynet+(HDMI-CEC) → Off / On

To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.

NWhen the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

Auto Turn Off → No / Yes

Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off

NThe active source on the TV remote must be set to TV to use the Anynet+ function.

NIf you set Auto Turn Off to Yes, connected external devices are also turned off when the

TV is turned off. If an external device is still recording, it may or may not turn off.

Application	Anynet+(HDMI-CEC)	►

Device List

Setup

UMove EEnter RReturn

	Setup
Anynet+ (HDMI-CEC)	: On
Auto Turn Off	: Yes

UMove EEnter RReturn

¦ Switching between Anynet+ Devices

1.Press the TOOLS button. Press the ENTEREbutton to select Anynet+ (HDMI-CEC).

2.Press the ▲ or ▼ button to select Device List, then press the ENTEREbutton

N Anynet+ devices connected to the TV are listed. If you cannot find a device you want, press the red button to scan for devices.

N Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List menu appears.

3.Press the ▲ or ▼ button to select a particular device and press the ENTEREbutton. It is switched to the selected device.

NSwitching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.

N The time required to scan for devices is determined by the number of connected devices. N When the device scan is complete, the number of devices found are not displayed.

View TV
Device List
Record	:	DVDR
DVDR MENU
DVDR Operation
Receiver	:	On
Setup

UMove EEnter RReturn

NAlthough the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for the connected device.

NIf you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu	Description
View TV	Anynet+ mode changes to TV broadcast mode.
Device List	Shows the Anynet+ device list.
(device_name) MENU	Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the
	DVD recorder will appear.
(device_name) Operation	Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play
	menu of the DVD recorder will appear.
Record: (*recorder)	Starts recording immediately using the recorder. (This is only available for devices that support the
	recording function.)
Stop Recording: (*recorder)	Stops recording.
Receiver	Sound is played through the receiver.

NIf more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

English - 25

TV Remote Control Buttons Available in Anynet+ Mode

	Device Type	Operating Status	Available Buttons
		After switching to the device, when the	Numeric buttons
		menu of the corresponding device is	▲/▼/◄/►/ENTEREbuttons
	Anynet+ Device	displayed on the screen.	Colour buttons / EXIT button
		After switching to the device, while playing	π(Backward search) / µ(Forward search) / ∫(Stop) /
		a file	∂(Play) / ∑(Pause)
	Device with built-	After switching to the device, when you	P >/ P <button
	in Tuner	are watching a TV programme
	Audio Device	When Receiver is activated	Volume / MUTE button

N The Anynet+ function only works when the active source on the TV remote control is set to TV.

N The ∏ button works only while in the recordable state.

NYou cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.

N The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. N The Anynet+ functions do not operate with other manufacturers’ products.

N The π, µoperations may differ depending on the device.

¦Recording

You can make a recording of a TV programme using a Samsung recorder.

1.Press the TOOLS button. Press the ENTEREbutton to select Anynet+ (HDMI-CEC).

2.Press the ▲ or ▼ button to select Record: (device_name), then press the ENTERE button. Recording begins.

NWhen there is more than one recording device

When multiple recording devices are connected, the recording devices are listed.

Press the ▲ or ▼ button to select a recording device and press the ENTERE button. Recording begins.

NWhen the recording device is not displayed

Select Device List and press the red button to search devices.

3.Press the EXIT button to exit.

N You can record the source streams by selecting Record: (device_name).

View TV
Device List
Record	:	DVDR
DVDR MENU
DVDR Operation
Receiver	:	On
Setup

UMove EEnter RReturn

NPressing the ∫ button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.

NBefore recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.

¦Listening through a Receiver (Home Theatre)

You can listen to sound through a receiver instead of the TV speaker.

1.Press the TOOLS button. Press the ENTEREbutton to select Anynet+ (HDMI-CEC).

2.Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.

3.Press the EXIT button to exit.

N If your receiver supports audio only, it may not appear in the device list.

NThe receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.

NWhen the Home Theatre receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver.

NIf there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the Speaker Select may be set to External Speaker when you turn the TV on again. (see page 18)

English - 26

¦ Troubleshooting for Anynet+

Problem	Possible Solution
Anynet+ does not work.	● Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
	● Connect only one receiver (home theatre).
	● Check if the Anynet+ device power cord is properly connected.
	● Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
	● Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
	● Check whether the TV remote control is in TV mode.
	● Check whether it is Anynet+ exclusive remote control.
	● Anynet+ doesn’t work in certain situations. (Searching channels, Operating Plug & Play, etc.)
	● When connecting or removing the HDMI 1.3 cable, please make sure to search devices again
	or turn your TV off and on again.
	● Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.	● Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-
	CEC) is set to On in the Anynet+ Setup menu.
	● Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button
	to show the Anynet+ menu and select a menu you want.
I want to exit Anynet+.	● Select View TV in the Anynet+ menu.
	● Press the SOURCE button on the TV remote control and select a device other than Anynet+
	devices.
	● Press P >/<, PRE-CH and FAV.CH to change the TV mode. (Note that the channel button
	operates only when a tuner-embedded Anynet+ device is not connected.)
The message Connecting to	● You cannot use the remote control when you are configuring Anynet+ or switching to a view
Anynet+ device... appears	mode.
on the screen.	● Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does	● You cannot use the play function when Plug & Play is in progress.
not play.
The connected device is not	● Check whether or not the device supports Anynet+ functions.
displayed.	● Check whether or not the HDMI 1.3 cable is properly connected.
	● Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
	● Search Anynet+ devices again.
	● You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may
	not support Anynet+ functions.
	● If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
	cord or a power failure, please repeat the device scan.
The TV programme cannot	● Check whether the antenna jack on the recording device is properly connected.
be recorded.
The TV sound is not output	● Connect the optical cable between TV and the receiver.
through the receiver.

English - 27

RECOMMENDATIONS FOR USE

¦ Teletext Feature

Most television stations provide written information services via Teletext. The index page of the Teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.

NFor Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.

N You can change Teletext pages by pressing the numeric buttons on the remote control.

10(mode)

Press to select the Teletext mode

(LIST/FLOF). If you press it in the LIST mode, it switches into the List save mode. In the List save mode, you can save Teletext page into list using the

8(store) button.

25(reveal)

Used to display the hidden text (answers to quiz games, for example). To display normal screen, press it again.

34(size)

Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again.

48(store)

Used to store the Teletext pages.

5Colour buttons (red/green/yellow/ blue)

If the FASTEXT system is used by a broadcasting company, the different topics covered on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button.

6/(Teletext on/mix)

Press to activate Teletext mode after selecting the channel providing the Teletext service. Press it twice to overlap the Teletext with the current broadcasting screen.

7:(exit)

Exit from the Teletext display.

81(sub-page)

Used to display the available sub-page.

92(page up)

Used to display the next Teletext page.

03(page down)

Used to display the previous Teletext page.

!6(index)

Used to display the index (contents) page at any time while you are viewing Teletext.

@9(hold)

Used to hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically. To resume, press it again.

#7(cancel)

Used to display the broadcast when searching for a page.

	7
	8
1	9
	0
2
3	@
	!
4	#
5
6

The Teletext pages are organized according to six categories:

Part Contents

ASelected page number.

BBroadcasting channel identity.

CCurrent page number or search indications.

DDate and time.

EText.

FStatus information.

FASTEXT information.

English - 28