Samsung LE32M87BD User Manual [en, cs, pl]

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Kapcsolatfelvétel: SAMSUNG WORLDWIDE

Bármilyen észrevétele, vagy kérdése van Samsung termékekkel kapcsolatban, forduljon a SAMSUNG ügyfélszolgálathoz.

Kontakt do SAMSUNG WORLDWIDE

Jeżeli masz jakieś uwagi lub pytania w sprawie produktów marki Samsung, skontaktuj się z naszą infolinią.

Επικοινωνήστε με τη SAMSUNG ΣΕ ΟΛΟ ΤΟΝ ΚΟΣΜΟ

Εάν έχετε σχόλια ή ερωτήσεις σχετικά με προϊόντα της Samsung, επικοινωνήστε με το κέντρο εξυπηρέτησης πελατών της SAMSUNG.

Свържете се със SAMSUNG ПО ЦЕЛИЯ СВЯТ

Ако имате въпроси или коментари за продуктите на Samsung, се обърнете към центъра за обслужване на клиенти на SAMSUNG.

Kontaktirajte SAMSUNG ŠIROM SVIJETA

Ako imate pitanja ili komentara u vezi s proizvodima tvrtke Samsung, obratite se centru za brigu o kupcima tvrtke

Samsung.

Kontaktujte Samsung po celém světě

Pokud máte dotazy nebo připomínky týkající se výrobků Samsung, kontaktujte středisko péče o zákazníky společnosti SAMSUNG.

Skontaktujte Celosvetový Samsung

Ak máte nejaké otázky alebo komentáre ohľadom produktov spoločnosti Samsung, prosím, skontaktujte centrum starostlivosti o zákazníkov spoločnosti SAMSUNG.

Contactaţi SAMSUNG WORLD WIDE (Samsung în întreaga lume)

Dacă aveţi întrebări sau comentarii în legătură cu produsele Samsung, contactaţi centrul de asistenţă pentru clienţi SAMSUNG.

Country	Customer Care Centre	Web Site
BELGIUM	02 201 2418	www.samsung.com/be
CZECH REPUBLIC	844 000 844	www.samsung.com/cz
	“Distributor pro Českou republiku:
	Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4”
DENMARK	70 70 19 70	www.samsung.com/dk
FINLAND	030-6227 515	www.samsung.com/fi
FRANCE	3260 SAMSUNG(7267864) (€ 0,15/min)	www.samsung.com/fr
GERMANY	01805-121213 (€ 0,14/Min)	www.samsung.de
HUNGARY	06-80-SAMSUNG (7267864)	www.samsung.com/hu
ITALIA	800 SAMSUNG(7267864)	www.samsung.com/it
LUXEMBURG	0032 (0)2 201 24 18	www.samsung.lu
NETHERLANDS	0900 20 200 88 (€ 0,10/Min)	www.samsung.com/nl
NORWAY	815-56 480	www.samsung.com/no
POLAND	0 801 801 881	www.samsung.com/pl
PORTUGAL	80 8 200 128	www.samsung.com/pt
REPUBLIC OF IRELAND	0818 717 100	www.samsung.com/uk
SLOVAKIA	0800-SAMSUNG (7267864)	www.samsung.com/sk
SPAIN	902 10 11 30	www.samsung.com/es
SWEDEN	0771-400 200	www.samsung.com/se
SWITZERLAND	0800-7267864	www.samsung.com/ch
U.K	0870 SAMSUNG (7267864)	www.samsung.com/uk
ESTONIA	800-7267	www.samsung.ee
LATVIA	800-7267	www.samsung.com/lv
LITHUANIA	8-800-77777	www.samsung.lt
KAZAKHSTAN	8 800 080 1188	www.samsung.kz
RUSSIA	8-800-200-0400	www.samsung.ru
UKRAINE	8-800-502-0000	www.samsung.com/ur
UZBEKISTAN	140-1234	www.samsung.uz

BN68-01186K-01

LCD TV

LE32M8

Owner’s Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

Register your product at www.samsung.com/global/register

Record your Model and Serial number here for future reference.

▪ Model _______________ ▪ Serial No. _______________

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

•Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

•Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of

the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

©2007 Samsung Electronics Co., Ltd. All rights reserved.

Contents

Connecting and Preparing Your TV

List of Parts.........................................................	3
Installing the Stand.............................................	3
Installing the Wall Mount Kit................................	3
Viewing the Control Panel...................................	4
Viewing the Connection Panel............................	5
Viewing the Remote Control...............................	7
Installing Batteries in the Remote Control..........	8
Switching On and Off..........................................	8
Placing Your Television in Standby Mode...........	8
Plug & Play.........................................................	9
Setting the Channels
Storing Channels Automatically........................	10
Storing Channels Manually................................	11
Setting the Channel Lists..................................	12
Activating the Child Lock..................................	12
Sorting the Stored Channels.............................	13
Assigning Channels Names..............................	13
Fine Tuning Channel Reception.......................	14
LNA (Low Noise Amplifier)................................	14
Setting the Picture
Changing the Picture Standard.........................	15
Adjusting the Custom Picture...........................	15
Changing the Colour Tone................................	16
Activating Backlight...........................................	16
Configuring Detailed Settings on the Picture....	17
Changing the Picture Size................................	18
Freezing the Current Picture.............................	19
Selecting the Screen Mode...............................	19
Resetting the Picture Settings to the
Factory Defaults................................................	19
Digital NR / Active Colour / DNIe / Movie Plus	20
Viewing the Picture In Picture (PIP)..................	21
HDMI Black Level.............................................	22

Setting the Sound
Changing the Sound Standard.........................	22
Adjusting the Sound Settings............................	23
Setting the TruSurround XT (SRS TS XT)........	23
Connecting Headphones..................................	24
Selecting the Sound Mode................................	24
Adjusting the Volume Automatically..................	24
Selecting the Internal Mute...............................	25
Listening to the Sound of the Sub Picture........	25
Resetting the Sound Settings to the Factory
Defaults.............................................................	26
Setting the Time
Setting and Displaying the Current Time..........	26
Setting the Sleep Timer....................................	27
Switching the Television On and Off
Automatically.....................................................	27
Function Description
Choosing Your Language.................................	28
Using Game Mode............................................	28
Setting the Blue Screen Mode / Selecting the
Melody .............................................................	29
Setting the Home Theatre PC...........................	29
Using the Energy Saving Feature.....................	30
Selecting the Source.........................................	31
Editing the Input Source Names.......................	31

English

English - 1

USING The DTV FeATuRe
Previewing the DTV Menu System...................	32
Updating the Channel List Automatically..........	33
Updating the Channel List Manually.................	33
Editing Your Favourite Channels......................	34
Selecting Channel List......................................	36
Displaying Programme Information..................	36
Viewing the EPG
(Electronic Programme Guide) Information......	37
Using the Scheduled List..................................	38
Setting the Default Guide..................................	38
Viewing All Channels and
Favourite Channels...........................................	39
Adjusting the Menu Translucency.....................	40
Setting up the Parental Lock.............................	40
Setting the Subtitle............................................	41
Setting the Subtitle Mode..................................	41
Selecting the Audio Format...............................	41
Selecting the Digital Text (UK only) ..................	42
Selecting the Time Zone (Spain only)...............	42
Viewing Product Information.............................	42
Checking the Signal Information.......................	43
Upgrading the Software....................................	43
Viewing Common Interface...............................	44
Selecting the CI (Common Interface) Menu.....	44
Resetting...........................................................	45
Selecting the Preferred Language
(Subtitle , Audio or Teletext)..............................	45
Preference........................................................	46

Using the Teletext Feature
Teletext Decoder...............................................	46
Displaying the Teletext Information...................	47
Selecting a Specific Teletext Page....................	47
Using Fastext to Select a Teletext Page...........	48
Setting Up Your Remote Control.......................	48
Remote Control Codes.....................................	49
Setting the PC
Setting up Your PC Software
(Based on Windows XP)...................................	52
Display Modes..................................................	52
Setting the PC...................................................	53
About Anynet+
What is Anynet+? .............................................	54
Connecting Anynet+ Devices............................	54
Setting Up Anynet+...........................................	55
Scanning and Switching between Anynet+
Devices.............................................................	55
Recording..........................................................	56
Listening through a Receiver............................	57
Check Points before Requesting Service.........	57
Recommendations For Use
Using the Anti-Theft Kensington Lock...............	58
Troubleshooting: Before Contacting Service
Personnel..........................................................	58
Technical and Environmental Specifications ....	59

Symbol	Press	Important	Note
			Button

English - 2

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

					M4 X L16
	Remote Control				Stand Screw
	& Batteries	Power Cord		Cover-Bottom		Stand	Cleaning Cloth
					X 4
	(AAA x 2)
	 Owner’s Instructions		 Warranty card		 Safety Guide		 Registration Cards

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

Installing the Stand

< 2 >

< 3 >

1.Place the TV faced down on a soft cloth or cushion on a table.

2.Put the stand into the hole at the bottom of the TV.

3.Insert screw into the hole indicated and tighten.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount

the TV on the wall.

For detailed information on installing the wall mount,

see the instructions provided with the Wall Mount items.

Contact a technician for assistance when installing the

wall mounted bracket.

Samsung Electronics is not responsible for any damage

to the product or injury to yourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury

due to electric shock.

Remove the stand and cover the bottom hole with a cap and fasten with two screws.

English -

Viewing the Control Panel

1

2

3

4

6 5

The product colour and shape may vary depending on the model.

1SOURCE

Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3,

DTV). In the on-screen menu, use this button as you use the ENTER/OK button on the remote control.

2MENU

Press to see an on-screen menu of your TV’s features.

In case of DTV mode, the DTV menu appears.

3

Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the and buttons on the remote control.

4

Press to change channels.

In the on-screen menu, use the buttons as you use the 5 and 6 buttons on the remote control.

(Without the Remote Control, you can turn on the TV by using the Channel buttons.)

5Speakers

6 (Power)

Press to turn the TV on and off.

Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

English -

Viewing the Connection Panel

1 2 3 4

5

					3
					6
@	!	Power Input	09	8	7

The product colour and shape may vary depending on the model.

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

1 Connecting Set-Top Box, VCR or DVD

Connector	Video	Input	RGB	Output
EXT 1		Audio (L/R)		Video + Audio (L/R)
	o	o	o	Only TV or DTV output is available.
EXT 2	o	o		Output you can choose.

-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

2 Connecting AUDIO

- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater.

3 HDMI IN 1,HDMI IN 2, HDMI IN 3

- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

- No additional Audio connection is needed for an HDMI to HDMI connection. What is HDMI?

-“High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels).

-The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable

(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

DVI IN (HDMI 2) (AUDIO R/L)

-When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.

-When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 terminal.

You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal on DVI for sound output.

Supported modes for HDMI/DVI and Component

	480i	480p	576i	576p	720p	1080i
HDMI/DVI 50Hz	X	X	X	O	O	O
HDMI/DVI 60Hz	X	O	X	X	O	O
Component	O	O	O	O	O	O

English -

4Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

-An outdoor aerial / A cable television network / A satellite network

5Connecting CI (Common Interface) CARD

-When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.

-The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

-When the channel information configuration has finished, the message "Updating Completed" is displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider.

Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.

Insert the CI-Card in the direction marked on it.

7Connecting External A/V Devices

-Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

-Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre sponding audio out connectors on the A/V device.

-Headphone may be connected to the headphone output (6) on the rear of your set. While the head phone is connected, the sound from the built-in speakers will be disabled.

8Connecting Computer

-Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer.

-Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer.

9DIGITAL AUDIO OUT (OPTICAL)

-Connect to a Digital Audio Component.

0 SERVICE

-Service connection for qualified service engineer.

!Connecting Component Devices (DTV/DVD)

-Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.

-If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.

-The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,

B-Y and R-Y or Y, Cb and Cr.

-Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

-This LCD TV displays its optimum picture resolution in 720p mode.

-This LCD TV displays its maximum picture resolution in 1080i mode.

@Kensington Lock

-The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

-If you want to use a locking device, contact the dealer where you purchased the TV.

-The place of the Kensington Lock may be different depending on its model.

English -

Viewing the Remote Control

1 Selects a target device to be controlled by the Samsung remote control (TV, DVD,

STB, CABLE, VCR) (Refer to page 49~51)

2 Television Standby button

3 Number buttons for direct channel access

4One/Two-digit channel selection

5It display "Channel List" on the screen.

6Selects the TV and DTV mode directly

7VCR/DVD Functions Rewind, Stop, Play/Pause, Fast/Forward

8 Volume increase

Volume decrease

9Temporary sound switch-off

0 Menu display and change confirmation

!Returns to the previous menu

#Electronic Program Guide

(EPG) display

$ Picture size selection % Sound effect selection

^Adjusts 5 separate devices - TV, DVD, STB, CABLE, or VCR.

&When pressing this button, a number of buttons on the remote control (e.g. Selects a target device, volume, channel buttons) light up for a few seconds and then turn off to save power. This

function is to conveniently use the remote control at night or when dark.

* Available source selection ( Previous channel

) DTV menu display

a Records for Live Broadcasting

(Anynet+ function only) (Refer to page 56)

bP: Next channel

P: Previous channel

cExit the OSD

dControl the cursor in the menu

eUse to see information on the current broadcast

fRuns the Anynet view functions and sets up Anynet devices.

gColour buttons : Press to add or delete channels and to store

channels to the favorite channel list in the “Channel List” menu.

hPicture-In-Picture On / Off

iDigital subtitle display

jPicture effect selection

kPicture freeze

lWhen your remote does not work, change the batteries and press the "RESET" button for 2-3 seconds before use.

Teletext Functions

6 Exit from the teletext display

0 Teletext index

@Alternately select Teletext, Double, or Mix.

$ Teletext size selection

*Teletext mode selection

(LIST/FLOF)

( Teletext sub page

bP: Teletext next page

P: Teletext previous page

cTeletext cancel

e Teletext reveal

g Fastext topic selection h Teletext hold

j Teletext store

The performance of the remote control may be affected by bright light.

This is a special remote control for the visually impaired, and has Braille points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons.

English -

Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.

3.Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3.Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged? 5. Is there a special fluorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1.Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2.Press the button on the front of the set.

You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on.

The programme that you were watching last is reselected automatically.

3.Press the numeric button (0~9) or channel up/down (/) button on the remote control or button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4.To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1.Press the POWERbutton on the remote control.

The screen is turned off and a red standby indicator appears on the front of your set.

2.To switch your set back on, simply press the POWER, numeric buttons (0~9), TV/DTV button or channel up/down (/) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial. 

English -

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be available in some countries.

Plug & Play

Start Plug & Play.

OK

Enter Exit

1.Press the POWER button on the remote control.

The message "Start Plug & Play" is displayed with "OK" selected.

2.Select the appropriate language by pressing the ▲ or ▼ buttons. Press the ENTER/OK button to confirm your choice.

3.Press the ◄ or ► buttons to select “Shop” or “Home”, then the ENTER/OK button.

We recommend setting the TV to Home mode for the best picture in your home environment.

Shop mode is only intended for use in retail environments.

If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the MENU button for five seconds on the side panel of the TV.

4.The message "Check antenna input." is displayed with "OK" selected. Press the ENTER/OK button.

Please check that the antenna cable is connected correctly.

5.Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER/OK button to confirm your choice.

6.The message “Some DTV functions may not be available. Digital Scan” is displayed.

Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER/OK button.

Yes: First an ATV search is performed and then a DTV ch. auto search is performed.

No: Only an ATV search is performed.

This function is supported for all countries except for the following 6 countries: the United Kingdom, Austria, France, Germany, Italy, Spain.

7.The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER/OK button.

The channel search will start and end automatically.

The DTV channel scan menu appears and the DTV channel is automatically updated.

If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV.

After all the available channels are stored, the "Clock Set" menu appears.

Press the ENTER/OK button at any time to interrupt the memorization process.

For detailed descriptions about DTV channel update, refer to page 33 of this manual.

After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country.

8.Press the ENTER/OK button.

Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► buttons. Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ buttons.

You can also set the hour and minute by pressing the number buttons on the remote control.

9.Press the ENTER/OK button to confirm your setting.

Language: Select your language.

Country: Select your country.

Auto Store: Automatically scans for and stores channels available in the local area.

Clock Set: Sets the current time for the TV clock.

English -

If you want to reset this feature...

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ENTER/OK button again, to select "Plug & Play".

3.The message "Start Plug & Play" is displayed.

(Refer to page 9)

TV	Setup
Plug & Play	: English	
Language		
Time	: Off	
Game Mode		
Blue Screen	: Off	
Melody	: Off	
PC	: Off	
Home Theatre PC		
More
Move	Enter	Return

Plug & Play

Start Plug & Play.

OK

Enter Return

-Storing Channels Automatically

-Storing Channels Manually

TV	Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune	: Off	
LNA		
Move	Enter	Return

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.

2.Press the ENTER/OK button to select "Country".

3.Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER/OK button to confirm your choice.

Even though you have changed the country setting in this menu, the country setting for DTV is not changed. Use the Plug & Play function to change the country setting for DTV.

(Refer to page 9)

4.Press the ▲ or ▼ button to select "Auto Store", then press the ENTER/OK button.

5.Press the ENTER/OK button.

The TV will begin memorizing all of the available channels.

Press the ENTER/OK button at any time to interrupt the memorization process and return to the "Channel" menu.

6.After all the available channels are stored, the "Sort" menu appears.

English - 10

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you wish to identify.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.

2.Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.

3.Press the ENTER/OK button to select "Programme".

4.To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼ button and then press the ENTER/OK button.

You can also set a programme number by pressing number buttons on the remote control.

5.Press the ▲ or ▼ button to select "Colour System", then press the ENTER/OK button.

6.Select the colour standard required by pressing the ▲ or ▼ button then, press the ENTER/OK button.

7.Press the ▲ or ▼ button to select "Sound System", then press the ENTER/OK button.

8.Select the sound standard required by pressing the ▲ or ▼ button, then press the ENTER/OK button.

If there is an abnormal sound or no sound, re-select the sound system required.

9.If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel". Press the ENTER/OK button. Select C (Air channel) or S (Cable channel) by pressing the or button. Press the button to select channel.

Select the required number by pressing the ▲ or ▼ button and then press the ENTER/OK button.

Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)

You can also set a channel number by pressing number buttons on the remote control.

10.If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".

Press the ENTER/OK button. Search by pressing the ▲ or ▼ button and then press the ENTER/OK button.

11.Press the ▲ or ▼ button to select "Store". Press the ENTER/OK button to select "OK".

12.Repeat steps 3 to 11 for each channel to be stored.

Programme: Selects a program number for the channel.

Colour System: Sets the colour supporting system.

Sound System: Sets the sound supporting system.

Channel: Selects a channel.

Search: Scans for the frequency value for the channel.

Store: Saves your settings.

English - 11

Setting the Channel Lists

Set the channels according to your preference.

You can easily delete, add, or lock the channel you want.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER/OK button.

3.Press the ENTER/OK button again, to select "Channel List".

4.Press the ► button to select " " line.

5.Press the ▲ or ▼ button to select the undesired channel, then press the ENTER/OK button to cancel.

6.Repeat steps 5 for each channel to be selected or canceled

7.Press the EXIT button to exit.

" " is active when "Child Lock" is selected to "On".

You can select these options by simply pressing the CH LIST button on the remote control

Channel List

P 1 C3

1 / 10

Prog.
0	C--
1	C3
2	BBC 1
3	C74
4	C75
5	C76
6	S3
7	S4
8	S6
9	S7

Add	Lock
Move	Enter
Page	Return

Activating the Child Lock

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio.

Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control away from children.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "Child Lock", then press the ENTER/OK button.

4.Press the ▲ or ▼ button to select "On" or "Off". Press the

ENTER/OK button.

5.Press the ▲ or ▼ button to select "Channel List", then press the ENTER/OK button.

6.Press the ► button to select "" line.

7.Press the ▲ or ▼ button to select the channels you want to lock, then press the ENTER/OK button.

8.Repeat steps 7 for each channel to be locked or unlocked.

9.Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on "" to be active or inactive.

TV	Channel Manager
	Channel List
	Child Lock	:	Off
			On

			Move				Enter Return
			Channel Liat
	P 2	C4	BBC1
					1 / 10
	Prog.
	0	C--
	1	C3
	2	BBC 1

3 C74

4 C75

5 C76

6 S3

7 S4

8 S6

	9					S7
						Add			Lock
						Move			Enter
						Page			Return

English - 12

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to:

Modify the numeric order in which the channels have been automatically stored.

Give easily remembered numbers to the channels that you watch most often.

1.Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.

2.Press the ▲ or ▼ button to select "Sort", then press the

ENTER/OK button.

3.Select the channel number that you wish to change by press ing the ▲ or ▼ button repeatedly. Press the ENTER/OK button.

The selected channel number and name are moved to right side.

4.Press the ▲ or ▼ button to move to the position in which you would like to change and then press the ENTER/OK button. The selected channel is exchanged with the one

previously stored to the chosen number.

5.Repeat steps 3 to 4 for another channel to be sorted.

6.Press the EXIT button to exit.

TV		Channel
Country		: Belgium	
Auto Store			
Manual Store			
Channel Manager			
Sort			
Name			
Fine Tune		: Off	
LNA			
Move		Enter	Return
TV		Sort
Prog.	Ch.	Name
	

0	C--
1	C23	

2C16

3C3

4S1



Move

Enter

Return

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Name", then press the

ENTER/OK button.

3.If necessary, select the channel to be assigned to a new name by pressing the ▲ or ▼ button. Press the ENTER/OK button.

The selection bar is displayed around the name box.

4.	To...	Then...
	Select a letter, number or symbol	Press the ▲ or ▼ button
	Move on the next letter	Press the ► button
	Move back the previous letter	Press the ◄ button
	Confirm the name	Press the ENTER/OK button

TV		Channel
Country		: Belgium	
Auto Store			
Manual Store			
Channel Manager			
Sort			
Name			
Fine Tune		: Off	
LNA			
Move		Enter	Return
TV		Name
Prog.	Ch.	Name
	
0	C--	-----
1	C23	-----
2	C16	-----
3	C3	-----
4	S1	-----
	

Move

Enter

Return

The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)

5.Repeat steps 3 to 4 for each channel to be assigned to a new name.

6.Press the EXIT button to exit.

English - 13

To reset the fine-tuning, select "Reset" by pressing the ▲ or ▼ button and then press the ENTER/OK button.

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1.	Use the number buttons to directly select the channel that
	you want to fine tune.
2.	Press the MENU button to display the menu.
	Press the ▲ or ▼ button to select "Channel", then press the
	ENTER/OK button.
3.	Press the ▲ or ▼ button to select "Fine Tune", then press
	the ENTER/OK button.
4.	Press the ◄ or ► button to adjust the fine tuning.
	Press the ENTER/OK button.
5.	Press the EXIT button to exit.
	Fine tuned channels that have been saved are marked with
	an asterisk "*" on the right-hand side of the channel number
	in the channel banner. And the channel number turns red.

TV	Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune	: Off	
LNA		
Move	Enter	Return

Fine Tune

P 1

0

Reset

Adjust

Save

Return

LNA (Low Noise Amplifier)

If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal).

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "LNA", then press the

ENTER/OK button.

TV	Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune	: Off	
LNA		
Move	Enter	Return

3.Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.

4.Press the EXIT button to exit.

TV	Channel
Country	: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune	:	Off
LNA
		On

Move

Enter

Return

English - 14

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1.Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture".

2.Press the ENTER/OK button again, to select "Mode".

3.Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER/OK button.

4.Press the EXIT button to exit.

Dynamic: Selects the picture for high-definition in a bright room.

Standard: Selects the picture for optimum display in a normal environment.

Movie: Selects the picture for comfortable display in a dark room.

The Picture mode must be adjusted separately for each input source.

You can return to the factory defaults picture settings by selecting the "Reset".

(Refer to "Resetting the Picture Settings to the Factory

Defaults" on page 19)

TV	Picture
Mode	: Dynamic	
Contrast		100
Brightness		50
Sharpness		75
Colour	G50	55
Tint		R50
Colour Tone	: Cool1	
Detailed Settings		
Backlight	: 10	
sMore
Move	Enter	Return
TV

	Picture
Mode	: DynamicDynamic		100
Contrast	Standard
Brightness	Movie		50
Sharpness			75
Colour	G50		55
Tint		R50
Colour Tone	: Cool1
Detailed Settings
Backlight	: 10
sMore

Move

Enter

Return

You can also press the P.MODE button on the remote control to select one of the picture settings.

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

2.Press the ▲ or ▼ button to select a particular item. Press the

ENTER/OK button.

3.Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER/OK button.

4.Press the EXIT button to exit.

TV	Picture
Mode	: Dynamic	
Contrast		100
Brightness		50
Sharpness		75
Colour	G50	55
Tint		R50
Colour Tone	: Cool1	
Detailed Settings		
Backlight	: 10	
sMore
Move	Enter	Return

 Contrast: Adjusts the lightness and darkness between objects and the background.  Brightness: Adjusts the brightness of the whole screen.

 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.  Colour: Adjusts the colours, making them lighter or darker.

 Tint (NTSC or DTV only): Adjusts the colour of objects, making them more red or green for a more natural look.

The adjusted values are stored according to the selected Picture mode. In PC Mode, Only "Contrast" and "Brightness" can be adjusted.

“Tint” function is available only in “HDMI” and “Component” mode.

English - 15

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 15)

2.Press the or button to select "Colour Tone", then press the ENTER/OK button.

3.Press the or button to select the desired colour tone setting. Press the ENTER/OKbutton.

4.Press the EXIT button to exit

Cool2: Makes the colour temperature bluer than "Cool1" menu.

Cool1: Makes whites bluish.

Normal: Keeps whites white.

Warm1: Makes whites reddish.

Warm2: Makes the colour temperature redder than "Warm1" menu.

TV	Picture
Mode	: Dynamic		
Contrast			100
Brightness			50
Sharpness			75
Colour	G50		55
Tint			R50
Colour Tone	: Cool1		
Detailed Settings			
Backlight	: 10		
sMore
Move	Enter		Return
TV	Picture
Mode	: Dynamic		100
Contrast
Brightness			50
Sharpness			75
Colour	G50		55
Tint		Cool 2 R50
Colour Tone	: Cool1Cool 1
Detailed Settings		Normal
Backlight	: 10 Warm 1
sMore		Warm 2

Move

Enter

Return

The adjusted values are stored according to the selected Picture mode.

When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.

Activating Backlight

You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10)

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 15)

2.Press the ▲ or ▼ button to select “Backlight”, then press the

ENTER/OK button.

3.Press the ◄ or ► button to decrease or increase the value of a particular item.

4.Press the ENTER/OK button.

Press the EXIT button to exit.

TV	Picture
Mode	: Dynamic	
Contrast		100
Brightness		50
Sharpness		75
Colour	G50	55
Tint		R50
Colour Tone	: Cool1	
Detailed Settings		
Backlight	: 10	
sMore
Move	Enter	Return
Backlight		10

Adjust Return

English - 16

Configuring Detailed Settings on the Picture

You can set detailed picture settings.

1.Press the MENU button to display the menu.

2.Press the ENTER/OK button, to select "Picture".

3.Press the ▲ or ▼ button to select "Detailed Settings", then press the ENTER/OK button.

4.Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Available options: Black Adjust, Dynamic Contrast, Gamma, White Balance, My Colour Control, Edge Enhancement, Colour Space

5.When you are satisfied with your setting, press the

ENTER/OK button.

6.Press the EXIT button to exit.

When the picture mode is set to Movie or Standard, Detailed Settings can be selected.

If DNIe is Off, the Detailed Settings cannot be selected when the Picture mode is in Standard mode.

TV	Picture
Mode	: Movie	
Contrast		80
Brightness		45
Sharpness		10
Colour	G50	53
Tint		R50
Colour Tone	: Warm2	
Detailed Settings		
Backlight	: 0	
sMore
Move	Enter	Return

TV	Detailed Settings
	Black Adjust	: Off	
	Dynamic Contrast : Off		
	Gamma	: 0	
	White Balance		
	My Colour Control		
	Edge Enhancement : Off		
	Colour Space	: Auto	
	Move	Enter	Return

Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust the screen depth.

Dynamic Contrast: Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma: -3 ~ +3

You can adjust the middle brightness of pictures.

Press the ◄ or ► button until you reach the optimal setting.

White Balance: R Offset/G Offset/B Offset/R Gain/G Gain/B Gain/Reset

You can adjust the colour temperature for more natural picture colours.

R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

My Colour Control: Pink/Green/Blue/White/Reset

This setting can be adjusted to suit your personal preferences.

Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button. Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted colours will be reset to the factory defaults.

Edge Enhancement: Off/On

You can emphasize object boundaries.

Colour Space: Auto/Wide

You can set the colour reproduction space for the input signal to Auto or Wide.

English - 17

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture".

2. Press the ▲ or ▼ button to select "Size", then press the

ENTER/OK button.

3. Select the required option by pressing the ▲ or ▼ button. Press the ENTER/OK button.

4. Press the EXIT button to exit.

 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

 Wide Zoom: Magnify the size of the picture more than 4:3.

 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

 4:3: This is the default setting for a video movie or normal broadcasting.

 Just Scan: Displays the input scenes as they are without any cutoff when HDMI 720p,1080i signals are

input.

"Auto Wide" function is available only in "TV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.

In PC Mode, only "16:9" and "4:3" mode can be adjusted. Zoom : Select by pressing the ◄ or ► buttons.

Use the ▲ or ▼ button to move the picture up and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.

Wide Zoom : Move the screen up/down using the▲ or ▼ buttons after selecting the by pressing the ► or

ENTER/OK button.

TV	Picture
rMore
Size	: Auto Wide		
Screen Mode	: 16 : 9		
Digital NR	: Off		
Active Colour	: Off		
DNle	: Off		
Movie Plus	: Off		
Reset	: OK		
Move	Enter	Return

TV	Size
Auto Wide
16 : 9
Wide Zoom
Zoom
4 : 3
Just Scan
Move	Enter	Return

You can select these options by simply pressing the P.SIZE button on the remote control.

English - 18

English - 19

Freezing the Current Picture

Press the STILL button to freeze a moving picture into a still one. Press again to cancel.

Selecting the Screen Mode

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.

1.Press the MENU button to display the menu. Press the ENTER/OK button, to select “Picture”.

2.Press the ▲ or ▼ button to select "Screen Mode", then press the ENTER/OK button.

3.Select the required option by pressing the ▲ or ▼ button. Press the ENTER/OK button.

Available options: 16:9, Wide Zoom, Zoom, 4:3

16:9: Sets the picture to 16:9 wide mode.

Wide Zoom: Magnify the size of the picture more than 4:3.

Zoom: Magnify the size of the picture vertically on screen.

4:3: Sets the picture to 4:3 normal mode.

4.Press the EXIT button to exit.

Picture Size is available in Auto Wide mode

This function is not available in PC or Component, HDMI mode.

TV	Picture
rMore
Size	: Auto Wide		
Screen Mode	: 16 : 9		
Digital NR	: Off		
Active Colour	: Off		
DNle	: Off		
Movie Plus	: Off		
Reset	: OK		
Move	Enter	Return

TV	Picture
rMore
Size	: Auto Wide
Screen Mode	: 16 : 916:9
Digital NR	: OffWide Zoom
Active Colour	: Off	Zoom
DNle	: Off	4:3
Movie Plus	: Off
Reset	: OK
Move	Enter	Return

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1.	To select the desired picture effect, follow the
	"Changing the Picture Standard" instructions number 1 to 3
	on page 15.
2.	Press the ▲ or ▼ button to select "Reset", then press the
	ENTER/OK button.
3.	Press the ▲ or ▼ button to select "OK" or "Cancel".
	Press the ENTER/OK button.
4.	Press the EXIT button to exit.
	The "Reset" will be set for each picture mode.

TV	Picture
rMore
Size	: Auto Wide		
Screen Mode	: 16 : 9		
Digital NR	: Off		
Active Colour	: Off		
DNle	: Off		
Movie Plus	: Off		
Reset	: OK		
Move	Enter	Return
TV	Picture

rMore

Size	: Auto Wide
Screen Mode	: 16 : 9
Digital NR	: Off
Active Colour	: Off
DNle	: Off
Movie Plus	: Off
Reset	:	OK	OK
		Cancel
Move	Enter		Return

Digital NR / Active Colour / DNIe / Movie Plus

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

1.Press the MENU button to display the menu. Press the ENTER/OK button, to select “Picture”.

2.Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Available options: Digital NR, Active Colour, DNIe, Movie Plus.

TV	Picture
rMore
Size	: Auto Wide		
Screen Mode	: 16 : 9		
Digital NR	: Off		
Active Colour	: Off		
DNle	: Off		
Movie Plus	: Off		
Reset	: OK		
Move	Enter	Return

3.When you are satisfied with your setting, press the ENTER/OK button.

4.Press the EXIT button to exit.

Digital NR: Off/Low/Medium/High/Auto

If the signal received by the television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen.

This function is not available in PC mode.

Active Colour: Off/On

If you turn on this option, the colours of the sky and grass will be stronger and clearer for a more vivid on-screen picture.

This function is not available in PC mode.

This function is not available in Movie and Standard mode.

DNIe: Off/Demo/On

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.

DNIeTM (Digital Natural Image engine)

This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes.

This function is not available in PC mode.

This function is not available in Movie mode

Movie Plus: Off/On

You can view more natural skin and clear text even in fast moving scenes.

Use this function when watching movies.

The Wide Zoom, Zoom and Just Scan mode is not supported.

This function is not available in PC mode.

English - 20

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "PIP", then press the

ENTER/OK button.

3.Press the ENTER/OK button again.

Press the ▲ or ▼ button to select "On", then press

ENTER/OK button.

If the PIP is activated, the size of the main picture turns to "16:9".

4.Press the ▲ or ▼ button to select "Source",then press ENTER/OK button. Select a source of the sub picture by pressing the ▲ or ▼ button and press the ENTER/OK button.

The sub picture can serve different source selections based on what the main picture is set to.

5.Press the ▲ or ▼ button to select "Size" of the sub picture and then press the ENTER/OK button. Select a size of the sub picture by pressing the ▲ or ▼ button and then press the

ENTER/OK button.

If main picture is in "PC" and “Component” mode, "Size" is not available.

TV	Mode	: Custom	
	Equalizer	Setup	
	More	: Off	
	SRS TS XT
	Auto Volume	: Off	
	Energy Saving	: Off	
	Internal Mute	: Off	
	HDMI Black Level: Low		
	Reset		
	PIP
	Move	Enter	Return
	Move	Enter	Return

TV	Mode	: Custom		
	Equalizer	PIP		
		: On
	PIP			
	SRS TS XT	: Off		
	Source	: TV		
	Auto Volume	: Off		
	Size	:	Off	
	Internal Mute	:		
	Position
	ProgrammeReset	: P 1		
	Move	Enter		Return
	Move	Enter		Return

Press the PIP button on the remote control repeatedly to activate or deactivate the "PIP".

6.Press the ▲ or ▼ button to select "Position", then press the ENTER/OK button.

Select the position of the sub picture by pressing the ▲ or ▼ button and then press the

ENTER/OK button.

7.Press the ▲ or ▼ button to select "Programme" and then press the ENTER/OK button.

You can select the channel that you want to view through sub picture by pressing the ▲ or ▼ button. Press the ENTER/OK button.

The "Programme" can be active when the sub picture is set to TV.

8.Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

Source: Used to select a source of the sub picture.

Size: Used to select a size of the sub picture.

Position: Used to move the sub picture.

Programme: Used to Change the sub picture.

PIP Settings

O: PIP operates, X: PIP doesn’t operate

Main Sub	TV analog	Ext.1	Ext.2	AV	S-Video	Component	HDMI	PC	TV digital
Component	O	O	O	O	X	X	X	X	X
HDMI	O	O	O	O	X	X	X	X	X
PC	O	O	O	O	X	X	X	X	X

English - 21

HDMI Black Level

You can directly select the black level on the screen to adjust the screen depth.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "HDMI Black Level", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "Normal" or "Low", then press the ENTER/OK button.

4.Press the EXIT button to exit.

This function is active only when the external input connects to HDMI(RGB signals).

Normal: The screen gets brighter.

Low: The screen gets darker.

TV	Mode	: Custom	
	Equalizer	Setup	
	More	: Off	
	SRS TS XT
	Auto Volume	: Off	
	Energy Saving	: Off	
	Internal Mute	: Off	
	HDMI Black Level: Low		
	Reset		
	PIP
	Move	Enter	Return
	Move	Enter	Return

TV	Mode	: Custom		
	Equalizer	Setup		
	More	: Off		
	SRS TS XT
	Auto Volume	: Off		
	Energy Saving	: Off		
	Internal Mute	: Off
	HDMI Black Level: LowNormal
	Reset	Low
	PIP
	Move	Enter	Return
	Move	Enter	Return

Changing the Sound Standard

You can select the type of the special sound effect to be used when watching a given broadcast.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the

ENTER/OK button.

2.Press the ENTER/OK button again, to select "Mode".

3.Select the required sound effect by pressing the ▲ or ▼ button repeatedly and then press the ENTER/OK button.

4.Press the EXIT button to exit.

Standard: Selects the normal sound mode.

Music: Emphasizes music over voices.

Movie: Provides live and full sound for movies.

Speech: Emphasizes voices over other sounds.

Custom: Selects your custom sound settings.

(Refer to "Adjusting the Sound Settings")

TV	Sound
Mode	: Custom	
Equalizer		
SRS TS XT	: Off	
Auto Volume	: Off	
Internal Mute	: Off	
Sound Select	: Main	
Reset
Move	Enter	Return
TV	Sound

Mode	:	CuStandardstom
Equalizer		Music
		Off Movie
SRS TS XT	:
Auto Volume	:	OffSpeech
		Custom
Internal Mute	:	Off
Sound Select	: Main
Reset
Move	Enter		Return

English - 22

Adjusting the Sound Settings

The sound settings can be adjusted to suit your personal preferences.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Equalizer", then press the

ENTER/OK button.

3.Press the ◄ or ► button to select a particular item.

Press the ENTER/OK button.

4.Press the ▲ or ▼ button to reach the required setting.

Press the ENTER/OK button.

5.Press the EXIT button to exit.

If you make any changes to these settings, the Sound Mode is automatically switched to "Custom".

TV	Sound
Mode	: Custom	
Equalizer		
SRS TS XT	: Off	
Auto Volume	: Off	
Internal Mute	: Off	
Sound Select	: Main	
Reset
Move	Enter	Return
TV	Equalizer

Balance 100Hz 300Hz 1kHz 3kHz 10kHz

Move

Adjust

Return

Setting the TruSurround XT (SRS TS XT)

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "SRS TS XT", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "On" or "Off". Press the

ENTER/OK button.

4.Press the EXIT button to exit.

TruSurround XT, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from

SRS Labs, Inc.

TV	Sound
Mode	: Custom	
Equalizer		
SRS TS XT	: Off	
Auto Volume	: Off	
Internal Mute	: Off	
Sound Select	: Main	
Reset
Move	Enter	Return
TV

	Sound
Mode	: Custom
Equalizer		Off
SRS TS XT	: Off
Auto Volume	: Off	On
Internal Mute	: Off
Sound Select	: Main
Reset

Move

Enter

Return

English - 23

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the

room.

When you insert the head set jack into the corresponding port, you can operate only "SRS TS XT" and "Auto Volume" in Sound menu.

Prolonged use of headphones at a high volume may damage your hearing.

You will not receive sound from the speakers when you connect headphones to the system. The headphone volume and TV volume are adjusted differently.

Selecting the Sound Mode

You can set the sound mode by pressing the “DUAL” button. When you press it, the current sound mode is displayed on the

screen.

		Audio Type		DUAL 1/2				Default
	FM	Mono			MONO			Automatic
		Stereo		STEREO ↔ MONO				change
	Stereo
		Dual		DUAL 1 ↔ DUAL 2				DUAL 1
		Mono			MONO			Automatic
	NICAM	Stereo		MONO ↔ STEREO				change
	Stereo
		Dual		MONO ↔ DUAL 1				DUAL 1
					DUAL 2

You can also set these options simply by pressing the DUAL button on remote control.

If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.

Adjusting the Volume Automatically

Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Auto Volume", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "On" or "Off". Press the

ENTER/OK button.

4.Press the EXIT button to exit.

TV	Sound
Mode	: Custom	
Equalizer		
SRS TS XT	: Off	
Auto Volume	: Off	
Internal Mute	: Off	
Sound Select	: Main	
Reset
Move	Enter	Return
TV

	Sound
Mode	: Custom
Equalizer
SRS TS XT	: Off
Auto Volume	: Off	Off
Internal Mute	: Off	On
Sound Select	: Main
Reset

Move

Enter

Return

English - 24

Selecting the Internal Mute

If you want to hear the sound through separate speakers, cancel the internal amplifier.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Internal Mute", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "On" or "Off". Press the

ENTER/OK button.

4.Press the EXIT button to exit.

When "Internal Mute" is set to "On", the Sound menus except for "Sound Select" (in PIP mode) cannot be adjusted.

TV	Sound
Mode	: Custom	
Equalizer		
SRS TS XT	: Off	
Auto Volume	: Off	
Internal Mute	: Off	
Sound Select	: Main	
Reset
Move	Enter	Return
TV

	Sound
Mode	: Custom
Equalizer
SRS TS XT	: Off
Auto Volume	: Off	Off
Internal Mute	: Off
Sound Select	:	On
Reset

Move

Enter

Return

Listening to the Sound of the Sub Picture

During the PIP features activation, you can listen to the sound of the sub picture.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Sound Select", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "Sub".

Press the ENTER/OK button.

4.Press the EXIT button to exit.

Main : Used to listen to the sound of the main picture.

Sub : Used to listen to the sound of the sub picture.

You can select this option when the “PIP” is set to “On”.

TV	Sound
Mode	: Custom	
Equalizer		
SRS TS XT	: Off	
Auto Volume	: Off	
Internal Mute	: Off	
Sound Select	: Main	
Reset
Move	Enter	Return
TV

	Sound
Mode	: Custom
Equalizer
SRS TS XT	: Off
Auto Volume	: Off
Internal Mute	: Off
Sound Select	: MainMain
Reset	Sub

Move

Enter

Return

English - 25

Resetting the Sound Settings to the Factory Defaults

If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Reset", then press the

ENTER/OK button.

3.Press the EXIT button to exit.

TV	Sound
Mode	: Custom	
Equalizer		
SRS TS XT	: Off	
Auto Volume	: Off	
Internal Mute	: Off	
Sound Select	: Main	
Reset
Move	Enter	Return

You can select this option when the "Game Mode" is set to "On".

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Time", then press the

ENTER/OK button.

TV	Mode	: Custom	
	Equalizer	Setup	
	Plug & Play	: Off	
	SRS TS XT		
	Language	: English	
	Auto Volume	: Off	
	Time	: O f	
	Internal Mute		
	Game Mode	: Off
	BlueResetScreen	: Off	
	Melody	: Off	
	PC	: Off	
	Home Theatre PC		
	More	Enter	Return
	Move
	Move	Enter	Return

3.Press the ENTER/OK button to select "Clock Set".

4.
	To...	Press the...
	Move to Month, Day, Year, Hour or Minute	or button.
	Set the Month, Day, Year, Hour or Minute	or button.
	Press the ENTER/OK button.

5.Press the EXIT button to exit.

TV	Clock Set
Month	Day	Year
p	01	2007
01
q
Hour	Minute
00	00
Move	Adjust	Return

If you disconnect the power cord, you have to set the clock again.

You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the remote control.

English - 26

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Time", then press the

ENTER/OK button.

3.Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER/OK button.

4.Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180).

Press the ENTER/OK button.

5.Press the EXIT button to exit.

The TV automatically switches to standby mode when the timer reaches 0.

TV	Mode	: Custom	
	Equalizer	Setup	
	Plug & Play	: Off	
	SRS TS XT		
	Language	: English	
	Auto Volume	: Off	
	Time	: O f	
	Internal Mute		
	Game Mode	: Off
	BlueResetScreen	: Off	
	Melody	: Off	
	PC	: Off	
	Home Theatre PC		
	More	Enter	Return
	Move
	Move	Enter	Return

	TV	Time
	Clock Set	:	Off
	Sleep Timer	:	30
	Timer 1	:	60
	Timer 2	:	90
			120
	Timer 3	:
			150
			180
	Move	Enter	Return

Switching the Television On and Off Automatically

1.	Press the MENU button to display the menu.			TV	Mode		Setup
							: Custom	
	Press the ▲ or ▼ button to select "Setup", then press the				Equalizer			
					Plug & Play		: Off	
					SRS TS XT			
	ENTER/OK button.				Language		: English	
					Auto Volume		: Off	
					Time		: O f	
					Internal Mute			
2. Press the ▲ or ▼ button to select "Time", then press the					Game Mode		: Off
					BlueResetScreen		: Off	
	ENTER/OK button.				Melody		: Off	
					PC		: Off	
3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",					Home Theatre PC			
					More
	"Timer 3", then press the ENTER/OK button.				Move		Enter	Return
4. Press the ▲ or ▼ buttons to adjust “Hour”, then press the ►					Move		Enter	Return
	button to move to the next step.			TV	5		Timer 1
	Set other items using the same method as above.
					On Time
		Yes/ No	Press the ▲or▼ button		00 :	00	No
					Off Time
					6
Repeat		Select a Once, Everyday,	Press the ▲or▼ button		00 :	00	No
					Repeat		Volume
		Mon-Fri, Mon-Sat, Sat-			Once		10
					Programme
		Sun
					01
Volume		Adjust a 0~100	Press the ▲or▼ button		► Move		Adjust	Return
Programme		Adjust a Programme	Press the ▲or▼ button

When finished, press the RETURN button to return.

•The current time will appear every time you press the INFO button.

•You can set the hour, minute, directly by pressing the number buttons on the remote control.

5.Press the EXIT button to exit.

English - 27

Choosing Your Language

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.

1.Press the MENU button to display the on-screen menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Language", then press the ENTER/OK button.

3.Select a particular language by pressing the ▲ or ▼ button repeatedly.

Press the ENTER/OK button.

You can choose one of 17 languages.

4.Press the EXIT button to exit.

TV	Mode	: Custom				
	Equalizer	Setup				
	Plug & Play	: Off				
	SRS TS XT					
	Language	: English				
	Auto Volume	: Off				
	Time	: O f				
	Internal Mute					
	Game Mode	: Off
	BlueResetScreen	: Off				
	Melody	: Off				
	PC	: Off				
	Home Theatre PC					
	More	Enter			Return
	Move
	Move	Enter			Return
TV	Mode	: Custom				
	Equalizer	Setup				
	Plug & Play
	SRS TS XT	:	Off			
	Language	:	EnglishEnglish
	Auto Volume	:	Off			
	Time		Deutsch
	Internal Mute	:	OffFrançais			
	Game Mode
	BlueResetScreen	:	OffItaliano
	Melody	:	OffEspañol
	PC		Nederlands
	Home Theatre PC	:	Off	q
	More	Enter			Return
	Move
	Move	Enter			Return

Using Game Mode

When connecting to a game console such as PlayStation			TM	or	TV		Setup
						Mode	: Custom	
Xbox	TM	, you can enjoy a more realistic gaming experience by				Equalizer		
						Plug & Play	: Off	
						SRS TS XT		
selecting game menu.						Language	: English	
						Auto Volume	: Off	
						Time	: O f	
						Internal Mute		
1. Press the MENU button to display the menu.						Game Mode	: Off
						BlueResetScreen	: Off	
Press the ▲ or ▼ button to select "Setup", then press the						Melody	: Off	
ENTER/OK button.						PC	: Off	
						Home Theatre PC		
2. Press the ▲ or ▼ button to select "Game Mode", then press						More
						Move	Enter	Return
the ENTER/OK button.						Move	Enter	Return

3.Press the ▲ or ▼ button to select "On" or "Off". Press the

ENTER/OK button.

4.Press the EXIT button to exit.

To disconnect the game console and connect another external device, cancel game mode in the setup menu. If you display the TV menu in Game mode, the screen shakes slightly.

Game Mode is not available in TV mode. If Game Mode is On:

TV	Mode	: Custom		
	Equalizer	Setup		
	Plug & Play	: Off		
	SRS TS XT
	Language	: English		
	Auto Volume	: Off
	Time			
	Internal Mute	: Off	Off
	Game Mode
	Reset	: Off	On
	Blue Screen
	Melody	: Off
	PC	: Off
	Home Theatre PC
	More	Enter		Return
	Move

Move

Enter

Return

•Picture Mode changes to Standard and Sound Mode changes to Custom automatically. The user cannot change these to other modes.

•Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.

•The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.

English - 28