Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
ARMENIA 0-800-05-555 -
AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at
AZERBAIJAN 088-55-55-555 -
BELARUS 810-800-500-55-500 -
BELGIUM 02-201-24-18
www.samsung.com/be (Dutch)
www.samsung.com/be_fr (French)
CZECH
800 - SAMSUNG (800-726786) www.samsung.com/cz
DENMARK
800-7267 www.samsung.com
FINLAND
FRANCE www.samsung.com/fr
GERMANY 01805 - SAMSUNG(726-7864 € 0,14/Min) www.samsung.com/de
8-800-555-555 -
HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com/hu
EIRE 0818 717100 www.samsung.com/ie
ITALIA 800-SAMSUNG(726-7864) www.samsung.com/it
KAZAKHSTAN 8-10-800-500-55-500 -
KYRGYZSTAN 00-800-500-55-500 www.samsung.com
LATVIA 8000-7267 www.samsung.com
LITHUANIA 8-800-77777 www.samsung.com
LUXEMBURG www.samsung.com/lu
00-800-500-55-500 -
NETHERLANDS www.samsung.com/nl
815-56 480 www.samsung.com/no
0 801 1SAMSUNG(172678)
www.samsung.com/pl
80820-SAMSUNG(726-7864) www.samsung.com/pt
RUSSIA 8-800-555-55-55 www.samsung.com
0800-SAMSUNG(726-7864)
www.samsung.com/es
0771 726 7864 (SAMSUNG) www.samsung.com/se
0848 - SAMSUNG(7267864, CHF 0.08/min)
www.samsung.com/ch
www.samsung.com/ch_fr/(French)
TADJIKIST AN 8-10-800-500-55-500 www.samsung.com
U.K 0845 SAMSUNG (7267864)
UKRAINE 0-800-502-000
www.samsung.ua
www.samsung.com/ua_ru
UZBEKISTAN 8-10-800-500-55-500 www.samsung.com
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
LCD TV user manual
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
T o receive more complete service, please register
your product at
www .samsung.com/register
Model _____________ Serial No. _____________
Figures and illustrations in this User Manual are provided for refer ence only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Digital TV notice
1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 A VC) digital terrestrial signals are
broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local
dealer the possibility to receive DVB-T or DVB-C signal.
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital TV over cable. However, some dif ferentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so
on, are not included in this specification. So, they cannot be workable at this moment.
3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts cannot be guaranteed.
4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may
be required to agree to terms and conditions of their business.
5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
6. For more information, please contact your local Samsung customer care centre.
The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in
✎
the local SAMSUNG Authorized Dealer, or the Samsung Call Centr e whether it can be improved by reconfiguring TV setting or not.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar
at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor , which will affect image quality. T o
reduce risk of this effect, please follow below recommendations:
Avoid displaying the same TV channel for long periods.•
Always try do display any image on full screen, use TV set picture format menu for best possible match.•
Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.•
Frequently use all TV features designed to reduce image retention and screen burnout, refer to pr oper user manual section for details.•
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the pr oduct.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
✎
If you use parts provided by another manufacturer , it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
✎
Installation with a stand. Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger ,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. T o prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of material resour ces. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where and how they can take these items
for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery
contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not pr operly disposed of,
these substances can cause harm to human health or the environment. T o protect natural resources and to promote material
reuse, please separate batteries from other types of waste and recycle them through your local, free battery r eturn system.
Contents
Gett ing Sta rted
4
4 Accessories
4 Viewing the Control Panel
5 Viewing the Remote Control
6 Connecting to an Antenna
6 Plug & Play (Initial Setup)
Connections
7
7 Connecting to an AV Device
8 Connecting to an Audio Device
9 Changing the Input Source
Basic Features
9 How to Navigate Menus
10 Using the INFO button (Now & Next guide)
10 Planning Y our Viewing
12 Channel Menu
13 Picture Menu
16 Sound Menu
18 Setup Menu
20 Support Menu
Advanced Features
22
22 Connecting to a PC
23 Media Play
29 Anynet
+
Other Information
2
32 Analogue Channel T eletext Feature
33 Installing the Wall Mount
34 Anti-Theft Kensington Lock
34 Securing the TV to the Wall
35 T roubleshooting
38 Specifications
39 Index
Check the Symbol!
t
O
This function can be used by
pressing the TOOLS button on the
remote control.
Note One-T ouch Button
Getting Started
Accessories
Please m ake sure the foll owing items a re includ ed with your LCD T V. If any items are miss ing, contac t your deal er.
✎
The items’ co lours and s hapes m ay vary de pending o n the model s.
✎
Remote Control & Batteries (AAA x 2) y
Owner’ s Instructions y
Warranty Card / Safety Guide (Not available in some locations) y
Cleaning Cloth y
Power Cord y
See separate guide for installing the stand.
Stand (1EA) y Screws (3EA) y
Viewing the Control Panel
The produ ct colou r and shap e may vary de pendin g on the mode l.
✎
Speakers
Power Indicator Remote control sensor
P
(Power)
T urns the TV on or off.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
SOURCE
E
T oggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTER
E
button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display), of your TV’ s features.
Y
Adjusts the volume. In the OSD, use the Y buttons as you would use the
and buttons on the remote control.
z
Changes the channels. In the OSD, use the z buttons as you would use the
and buttons on the remote control.
Remote control sensor Aim the remote control towards this spot on the TV .
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power code.
(M4 X L16)
5
01 Getting Started
English
Viewing the Remote Control
Installing batteries (Battery size: AAA)
NOTE
✎
Use the remote c ontrol with in 23 feet from th e TV.
x
Bright l ight may af fect the per forma nce of the rem ote
x
control. Avoid u sing near by specia l fluore scent lig ht or neon
signs.
The colo ur and sha pe may var y depend ing on the mod el.
x
Views the Media play. (P . 23)
Displays and selects the available video
sources. (P . 9)
Turns the TV on and off. (P . 6)
Press to directly access to channels.
Displays information on the TV screen. (P . 10)
Changes channels.
Quickly selects frequently used functions.
Selects on-screen menu items and change
menu values.
Display the main on-screen menu. (P . 9)
Adjusts the volume.
Returns to the previous channel.
Buttons in the Channel Manager,
Media Play menu, etc.
P .MODE: Selects picture mode. (P. 13)
S.MODE: Selects the sound mode. (P . 16)
DUAL: Selects sound mode. (P . 17)
AD: Audio Description selection.
(Not available in some locations) (P . 17)
P .SIZE: Choose the picture size. (P. 15)
SUBT .: Digital subtitle display. (P . 19)
Cuts off the sound temporarily.
Returns to the previous menu.
Exit the menu.
Use these buttons in the Media Play
and Anynet
+
modes. (P . 23, 29)
( μ : Controls recording on Samsung
recorders with the Anynet
+
feature)
Alternately selects Teletext, Double or MiX.
Displays channel list on the screen. (P . 13)
Display the EPG (Electronic Programme
Guide). (P . 10)
6
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Preset: Con necting th e mains and a ntenna.
✎
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Plug & Play is available only when the Input source is set to TV .
To
✎
return to the pre vious step, pre ss the red but ton.
1
Selecting a language
Press the or button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
2
Selecting Store Demo
or Home Use
Press the or button, then press the ENTER
E
button.
Select the y Home Use mode. Store Demo Mode is for retail
environments.
Return the unit’ s settings from y Store Demo to Home Use
(standard): Press the volume button on the TV . When the OSD
volume is displayed, press and hold MENU for 5 sec.
3
Selecting a country
Press the or button, then press the ENTER
E
button.
Select the appropriate country. If the desired country does not exist on the menu, select
Others.
After se lecting th e countr y in the
✎
Country menu, s ome model s may procee d with an
additio nal option to setu p the pin number.
When you in put the PIN num ber,
✎
0-0-0-0 is not available.
4
Selecting an antenna
Press the or button, then press the ENTER
E
button.
Select Air or Cable .
5
Selecting a channel
Press the or button, then press the ENTER
E
button.
Select the channel source to memorise. When setting the antenna source to Cable , a step
appears allowing you to assign numerical values (channel frequencies) to the channels.
For more information, refer to Channel Auto Store (P . 12).
Press the
✎
ENTER
E
button at a ny time to interru pt the memor isation p rocess.
6
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
Press the or button to select Auto , then press the ENTER
E
button.
7
Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
8
Enjoy your TV .
Press the ENTER
E
button.
If Y ou Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number . The default PIN number is “0-0-0-0.” If you want to
change the PIN number , use the Change PIN function.
Power Input
VHF/UHF Antenna
or
Cable
ANT OUT
02 Connections
Connections
Connecting to an AV Device
Using an HDMI / DVI Cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player , HD cable box, HD STB (Set-T op-Box) satellite receiver , cable box, satellite receiver
(STB)
HDMI IN 1(DVI), 2 , 3 / PC/DVI AUDI O IN
✎
When us ing an HDMI /DVI cable c onnecti on, you must us e the
x
HDMI IN 1(DVI) j ack. For the DVI ca ble
connec tion, use a DVI to HDM I cable or DV I-HDMI (DVI to HD MI) adapter fo r video co nnection a nd the DVI
AUDIO IN ja cks for audio.
If an exter nal devic e such as a DVD / B lu-ray player / c able box /
x
STB satelli te receiver s uppor ting a HDMI
version s older tha n 1.3 is connected, the T V may ope rate abnorm ally (e.g. no scree n display / no s ound /
annoyin g flicker / a bnorma l colour).
If there is no s ound af ter connec ting an HDM I cable, che ck the HDMI ve rsion of th e externa l device. If you
x
suspec t the versio n is older th an 1.3, contact the provi der of the dev ice to confi rm the HDMI ve rsion an d
reques t an upgrad e.
It
x
is recom mended you p urchase a n HDMI-ce rtif ied cabl e. Other wise, the scr een may app ear blan k or a
connection error may occur.
Using a Component (up to 1080p) or Audio/Video (480i only) Cable and Using a Scart Cable
Available devices: VCR, DVD, Blu-ray player , cable box, STB satellite receiver
In
✎
Ext. mode, DTV Out su pports M PEG SD Vide o and Audio on ly.
To obtain the best pi cture qual ity, the Compon ent conne ction is rec ommend ed over the A /V co nnectio n.
✎
DVI OUT
HDMI OUT
AUDIO OUT
DVD
Red White
26” 32”
COMPONENT OUT
AUDIO OUT
EXT
AUDIO OUT
VIDEO OUT
Yellow Red White
Red Blue Green
Blu-ray player DVD VCR
26” 32”
Connecting to an Audio Device
Using an Optical or Audio Cable Connection
Available devices: digital audio system, amplifier , DVD home theatre
The produ ct colou r and shap e may vary de pendin g on the mode l.
✎
DIGITAL AUDIO O UT (OPTICA L)
✎
When a dig ital audi o system is con nected to the
x
DIGITAL AUDIO O UT (OPTICA L) jack, de crease the vo lume
of both the T V and the system.
5. 1 CH (chann el) audio i s availabl e when the T V is conn ected to an exte rnal dev ice suppo rting 5.1 CH.
x
When the re ceiver ( home theat re) is set to on, you can he ar sound o utput from th e TV’s
x
optical ja ck. When th e
TV is re ceivin g a DTV sign al, the TV w ill send 5.1 CH sound to the home th eatre rece iver. When the sourc e is
a digita l compone nt such as a DVD / B lu-ray player / c able box / STB (S et- Top-Box) satelli te receiver a nd is
connec ted to the TV v ia HDMI, onl y 2 CH audio wi ll be heard f rom the home th eatre rece iver. If you want to
hear 5.1 CH audio, connec t the digit al audio ou t jack from you r DVD / Blu-ray pl ayer / cable b ox / STB sate llite
receive r directl y to an amplif ier or hom e theatre.
Headphones
✎ H
: You can connect yo ur headp hones to the he adphone s output on yo ur set.
While the h eadphon es are con nected, the so und from the b uilt-in spea kers will b e disable d.
Sound fu nction may be r estricte d when con necting he adphone s to the TV.
x
Headph one volume a nd TV vol ume are adju sted separ ately.
x
CONNECTIONS COMMON INTERFACE Slot
T o watch paid channels, the “CI or CI+ CARD” must be inserted.
If you don’t insert the “CI or CI+ CARD,” some channels will y
display the message “Scrambled Signal”.
The pairing information containing a telephone number , the “CI or y
CI+ CARD” ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider .
When the configuration of channel information has finished, the y
message “Updating Completed” is displayed, indicating the
channel list is updated.
NOTE
✎
You must obtain a “CI or CI+ CAR D” from a loc al cable s ervic e provide r.
x
When rem oving the “CI o r CI+ CARD”, carefully pul l it out with yo ur hands si nce dropp ing the “CI or CI+ CAR D” may
x
cause da mage to it.
Inser t the “CI or CI+ CARD” i n the directi on marked o n the card.
x
The loc ation of the
x
COMMON INTERF ACE slot may be dif ferent d ependi ng on the mode l.
“CI or CI+ CARD” is not s uppor ted in some co untries a nd region s; check with yo ur author ized deal er.
x
If you have any pro blems, ple ase conta ct a ser vice provi der.
x
OPTICAL
Headphone
Digital Audio
System
Changing the Input Source
Source List
Use to select TV or other external input
sources such as DVD / Blu-ray players /
cable box / STB satellite receiver connected
to the TV .
TV / Ext. / AV / Component / PC / ■
HDMI1/DVI / HDMI2 / HDMI3 / USB
In the
✎
Sourc e List, connected
inputs wi ll be highl ighted.
Edit Name
VCR / DVD / Cable STB / Satellite STB / PVR STB / ■
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier .
When co nnecting a n HDMI/DVI c able to the
✎
HDMI
IN 1(DVI) por t, you should se t to DVI PC or DVI
Devices mo de under Ed it Name .
Basic Features
How to Navigate Menus
Before using the TV , follow the steps below to lear n how to
navigate the menu and select and adjust different functions.
1 MENU button: Displays the main on-screen menu.
2 ENTER
E
/ Direction button: Move the cursor and
select an item. Confirm the setting.
3 RETURN button: Retur ns to the previous menu.
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1
MENU
m
The main menu options appears on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
2
/
Select an icon with the or
button.
3
ENTER
E
Press ENTER
E
to access the sub-
menu.
4
/
Select the desired submenu with
the or button.
5
/
Adjust the value of an item with the
or button. The adjustment in
the OSD may differ depending on
the selected menu.
6
ENTER
E
Press ENTER
E
to complete the
configuration.
7
EXIT
e
Press EXIT .
4
1
2
3
Using the INFO button (Now & Next guide)
The display identifies the current channel
and the status of certain audio-video
settings.
The Now & Next guide shows daily TV
programme information for each channel
according to the broadcasting time.
Scroll y , to view information for a
desired programme while watching the
current channel.
Scroll y , to view information for other channels. If you
want to move to the currently selected channel, press
the ENTER
E
button.
Planning Y our Viewing
Guide
The EPG (Electronic Programme Guide)
information is provided by broadcasters.
Using programme schedules provided by
broadcasters, you can specify programmes
you want to watch in advance so that
the channel automatically changes to
the selected programme channel at the
specified time. Programme entries may
appear blank or out of date depending on a
channel status.
Using Channel View
Using Scheduled View
1
Red (View Mode ): View the list of programmes that
are playing now or coming up.
2
Y ellow (+24 hours ): Viewing the list of programmes to
be broadcasted after 24 hours.
3
Blue (Ch.Mode ): Select the type of channels you want
to display on the Channel View window.
The – Ch. Mode differs according to the antenna
source.
4
Information : Displays details of the selected
programme.
5
(Page): Moves to the previous / next page.
6 ENTER
E
button
When selecting the current programme, you can –
watch the selected programme.
When selecting the future programme, you can –
reserve to watch the selected programme. T o cancel
the schedule, press the ENTER
E
button again and
select Cancel Schedules .
AD GUIDE
MEDIA.P
P . MODE S.MODE P . SIZE
DTV Air
15
abc1
18:00 ~ 6:00
Unclassified
No Detaild In formation
E
' Information
DTV Air 800 five
Family Affairs
18:00 - 18:30
Drama
Tanya confesses all to a stunned Babs. Conrad is anxious to hear...
18:30
19:15
Today
Today
)
Family Affairs
)
Dark Angel
800
800
five
five
800 five
View Mode
Information
E
Cancel
2:10 Tue 1 Jun
Guide
Scheduled View
1 4 6
DTV Air 800 five
Home and Away
18:00 - 18:30
Drama
Dani is devastated when scott makes clear his views on marriage...
27
28
800
24
16
6
Discovery
DiscoveryH&L
five
price-drop.tv
QVC
R4DTT
American Chopper
Programmes resume at 06:00
Home and...
No Information
QVC Selection
No Information
Tine Team
Fiv...
Today 18:00 - 19:00 19:00 - 20:00
)
Family Affairs
)
Dark Angel
800 five
View Mode
+24 Hours Ch. Mode
Information
k
E
2:10 Tue 1 Jun
Guide
Channel View - TV
1 2 3 4 5 6
18:11 Thu 6 Jan
11
English
03 Basic Features
Channel Manager
Delete or set favourites channels and use the programme
guide for digital broadcasts. Select a channel in the
Channels, My Channels or Scheduled screen.
■ Channels: Shows the channel list according to
channel type.
*
■
My Channels: Shows the group of the channel.
■ Scheduled: Shows all the currently reserved
programmes.
Using the c olour but tons with the
✎
Channel Manager
x
Red (Antenna ): Toggle among Air or Ca ble .
x
Green (Zoom ): Enla rges or shr inks a chan nel
number.
x
Yellow (Select ) : Sel ect desi red chann els and pre ss
the Yellow button to set a ll the sele cted chann els at
the same ti me. The
c
mark ap pears to the le ft of
the sele cted chann els.
x
Blue (Sort ): Cha nge the list o rdered by ch annel
name or channel number .
x
(Page ): Move to nex t or previ ous page.
T
x
(To o l s ): Disp lays the Channel Manager option
menu. ( The Option s menus may d iffer d ependi ng on
the situation .)
Channel Status Display Icons
Icons Operations
A
An Analogue channel.
c
A channel selected.
*
A channel set as a Favourite.
(
A programme currently being broadcast.
\
A locked channel.
)
A reserved programme.
Using Favourite Channels ¦
*
My Channels
(in Channel Manager )
Shows all favourite channels.
Edit My Channels ■
t
: Y ou can set the selected
channels to desired my channels group.
The “
✎ *
” symbol w ill be displ ayed and the c hannel w ill
be set as a my ch annel.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
One or mor e groups can b e selecte d.
x
3. After you have changed the settings, the channel list
for each group can be viewed in My Channels .
c 1 1futech
c 2 * 24ore.tv
15 abc1
3 BBC Wo rld
23 bid-up.tv
33 Boonerang
32 Cartoon Nwk
5 Class News
4 \ Coming Soon
27 Discovery
All
TV
Radio
Data/Other
Analogue
r
Air Antena
Zoom Select Sort
T
T ools
Channels
Edit My Channels
Delete
Deselect All
Select All
d
c 1 1futech
c 2 * 24ore.tv
15 abc1
3 BBC Wo rld
23 bid-up.tv
33 Boonerang
32 Cartoon Nwk
5 Class News
4 \ Coming Soon
27 Discovery
All
TV
Radio
Data/Other
Analogue
r
Air Antena
Zoom Select Sort
T
T ools
Channels
Channel Menu
Retuning channels ¦
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Country
The PIN input screen appears. Enter your 4 digit PIN number .
Digital Channel ■ : Change the country for digital
channels.
Analogue Channel ■ : Change the country for analogue
channels.
Auto Store
Scans for a channel automatically and stores in the TV .
Automatically allocated programme numbers may not
✎
correspond to actual or desired programme numbers. If
a channe l is locked u sing the Child Lock functio n, the
PIN input wi ndow appe ars.
Antenna Source (Air / Cable) ■ : Select the antenna
source to memorise.
Channel Source (Digital & Analogue / Digital / ■
Analogue): Select the channel source to memorise.
When selecting Cable Digital & Analogue or Digital :
Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all
channels with active broadcast stations and stores them
in the TV .
If you set
✎
Quick, you can set u p Networ k,
Networ k ID, Freque ncy, Modulat ion, Sym bol
Rate manua lly by press t he button on t he remote
control.
Network (Auto / Manual): Selects the Network ID
setting mode among Auto or Manual .
Network ID: When Network is Manual, you can set up
Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel.
(differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Manual Store
Scans for a channel manually and stores in the TV .
If a chann el is locked u sing the
✎
Child Lo ck function,
the PIN inpu t window app ears.
Digital Channel ■ : (available in DTV mode) When
scanni ng has fin ished, cha nnels are u pdated in the
channel list.
When se lecting
✎
Antenna Air: Channel, Frequency,
Bandwidth
When se lecting
✎
Antenna Cable: Frequency,
Modulation, Symbol Rate
Analogue Channel (Programme, Colour System, ■
Sound System, Channel, Search): If there is abn ormal
sound or n o sound, rese lect the so und stand ard
required.
Channel mode
✎
P
x
(progra mme mode): Whe n tuning is c omplete,
the broadc asting stati ons in your a rea have been
assign ed to positio n number s from P0 to P99. You
can sel ect a chan nel by enteri ng the posit ion numbe r
in this mod e.
C
x
(aerial c hannel mo de) / S (cable ch annel mod e):
These t wo modes a llow you to sele ct a channe l
by enterin g the assign ed numbe r for each ae rial
broadca sting statio n or cable c hannel.
Editing channels ¦
Channel Manager Option Menu
(in Channel Manager )
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the Edit
Channel Name or Edit Channel Number menu.
Edit Channel Name ■ (analogue channels only): Assign
your own channel name.
Edit Channel Number ■ (digital channels only): Edit the
number by pressing the number buttons desired.
Other Features ¦
Cable Search Option
(depending on the country)
Sets additional search options such as the frequency and
symbol rate for a cable network search.
Freq.Start / Freq.Stop ■ : Set the start or stop frequency
(differs in each country)
Modulation ■ : Displays available modulation values.
Symbol Rate ■ : Displays available symbol rates.
13
English
03 Basic Features
Channel Manager Option Menu
(in Channel Manager )
Set each channel using the Channel Manager menu options
(Lock / Unlock, Timer Viewing, Sort, Delete, Select All /
Deselect All). Option menu items may differ depending on
the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Lock / Unlock ■ : Lock a channel so that the channel
cannot be selected and viewed.
NOTE
✎
This fun ction is avai lable onl y when the
x
Child Lock
is set to On .
The PIN inp ut screen a ppears . Enter your 4-di git PIN,
x
the defaul t of which is “0 -0- 0-0”. Change th e PIN
using the C hange PIN option.
Timer Viewing ■ : You can set a desir ed channel to be
displayed automatically at the intended time. Set the
current time first to use this function.
When a dig ital cha nnel is se lected, pres s the
✎
button to vi ew the digita l Programm e.
Sort ■ (analogue channels only): This operation allows
you to change the programme numbers of the stored
channels. This operation may be necessary after using
the auto store.
Delete ■ : Y ou can delete a channel to display the channels
you want.
Select All / Deselect All ■ : Select all the channels
or deselect all the selected channels in the channel
manager .
Scheduled
(in Channel Manager )
Y ou can view, modify or delete a a show you have reserved
to watch.
Change Info ■ : Change a a show you have reserved to
watch.
Cancel Schedules ■ : Cancel a show you have reserved
to watch.
Information ■ : Display a show you have reserved
to watch. (Y ou can also change the reservation
information.)
Select All / Deselect All ■ : Select or deselect all reserved
programmes.
Channel List
Y ou can see all the channels searched.
Fine T une
(analogue channels only)
If the signal is weak or distorted, fine tune the channel
manually.
Fine tune d channe ls are marke d with an aste risk “*”.
✎
To reset the fine-tun ing, sele ct
✎
Reset.
Picture Menu
Changing the Preset Picture Mode ¦
Mode
Select your preferred picture type.
Dynamic ■ : Suitable for a bright room.
Standard ■ : Suitable for a normal
environment.
Movie ■ : Suitable for watching movies in a
dark room.
Adjusting picture settings ¦
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Y our television has several setting options for picture quality
control.
NOTE
✎
In analo gue
x
TV, Ext ., AV modes of the PAL system,
the Tint (G /R) fun ction is not avai lable.
In PC mode, you c an only ma ke change s to
x
Backlight, Contrast and Brightness.
Setting s can be adj usted and store d for each
x
extern al device c onnected to th e TV.
Lowering p icture bri ghtness re duces powe r
x
consumption.
Economical Solutions ¦
ECO Solution
Energy Saving (Off / Low / Medium / High / Picture ■
Off / Auto)
t
: Adjust the brightness of the TV
in order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except volume button to
turn on the screen.
No Signal Power Off (Off / 15 min / 30 min / 60 min) ■ :
Activates the Stand-by mode, in the case of “No Signal”
or “Check Signal Cable” status for a certain period of
time defined by the user .
Disabl ed when th e PC is in power sav ing mode.
✎
Changing the Picture Options ¦
Advanced Settings
(available in Standard / Movie mode)
Y ou can adjust the detailed setting for the screen including
colour and contrast.
In PC mode, you c an only ma ke change s to
✎
Dynam ic
Contr ast, Ga mma and Wh ite Bala nce.
Black T one (Off / Dark / Darker / Darkest) ■ : Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High) ■ : Adjust
the screen contrast.
Shadow Detail (-2~+2) ■ : Increase the brightness of dark
images.
Disabl ed under P C mode.
✎
Gamma ■ : Adjust the primary colour intensity.
RGB Only Mode (Off / Red / Green / Blue) ■ : You can
adjust Colour or Tint of Red, Green or Blue for the
picture from an external device (DVD player , home
theatre, etc.).
Colour Space (Auto / Native) ■ : Adjust the range of
colors available to create the image.
White Balance ■ : Adjust the colour temperature for a
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’ s
(red, green, blue) darkness.
R-Gain/G-Gain/B-Gain: Adjust each colour’ s
(red, green, blue) brightness.
Reset: Resets the White Balance to it’ s default settings.
Flesh T one ■ : Emphasize pink “Flesh Tone .”
Edge Enhancement (Off / On) ■ : Emphasize object
boundaries.
Picture Options
In PC mode, you c an only ma ke change s to the
✎
Colour
Ton e, Size, Digita l Noise Fi lter and Au to Protect ion
Time.
Colour T one (Cool / Normal / Warm1 / Warm2) ■
War m1
✎
or Warm 2 will be d eactivated w hen the
picture mo de is Dynamic .
Setting s can be adj usted and store d for each
✎
extern al device c onnected to a n input on the T V.
Picture Options
Digital Noise Filter : Auto
U Move E Enter R Return
Advanced Settings
Dynamic Contrast : Medium
Shadow Detail : 0
Gamma : 0
Colour Space : Native
U Move E Enter R Return
15
English
03 Basic Features
Size ■ : Your cable box/satellite receiver
may have its own set of screen
sizes as well. However , we highly
recommend you use 16:9 mode most
of the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide
broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
Adjusts the Po sition by usi ng
✎
, buttons .
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
Adjusts the Po sition or S ize by using
✎
, button.
4:3 : The default setting for a movie or normal
broadcasting.
Do not watch in 4:3 format fo r a long time. Traces
✎
of border s displayed o n the left, r ight and ce ntre
of the scree n may cause im age retentio n(screen
burn) whic h are not covere d by the warra nty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
NOTE
✎
After se lecting
x
Scree n Fit in HDMI ( 720p / 1080i / 1080p)
or Compo nent (1080i / 1080p) mode, you m ay need to
center the p icture:
1. Press the or button to select Position.
2. Press the ENTER
E
button.
3. Press the or button to move the
picture.
Depen ding on the in put source, th e picture si ze
x
options may va ry.
The avail able items m ay diffe r depend ing on the
x
selected mode.
In PC mode, on ly
x
16: 9 and 4: 3 modes ca n be
adjusted.
Setting s can be adj usted and store d for each
x
extern al device c onnected to a n input of the T V.
If you use the
x
Scree n Fit func tion with HD MI 720p
input, 1 lin e will be cut at t he top, bottom, lef t and
right as i n the oversca n functio n.
Screen Mode (16:9 / Wide Zoom / Zoom / 4:3) ■ :
Available only when picture size is set to Auto Wide .
Y ou can determine the desired picture size at the 4:3
WSS (Wide Screen Service) size or the original size.
Each European country requires differ ent picture size.
Not availab le in PC, Compo nent or HDM I mode.
✎
Digital Noise Filter (Off / Low / Medium / High / Auto ■
/ Auto Visualisation): When the broadcast signal is
weak, some static and ghosting may appear . Select one
of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels,
displays signal strength.
Only avai lable for an alogue c hannel s.
✎
When
✎
bar is gree n, you are rece iving the b est
possible signal.
MPEG Noise Filter (Off / Low / Medium / High / ■
Auto): Reduces MPEG noise to provide an improved
picture quality.
Disabl ed under P C mode.
✎
HDMI Black Level (Normal / Low) ■ : Selects the black
level on the screen to adjust the screen depth.
Available o nly in HDM I mode (RGB si gnals).
✎
Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to
automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
Available i n TV, AV , COMPONE NT (480i / 1080i)
✎
and HDMI (480 i / 1080i).
Auto Protection Time (2 hours / 4 hours / 8 hours / ■
10 hours / Off) : If the same image remains on the
screen, Auto Screen Burn Protector will work.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
Setting up the TV with Y our PC ¦
Set the input source to PC.
Auto Adjustment
t
Adjust frequency values/positions and fine tune the settings
automatically.
Not availab le when co nnectin g through HD MI/DVI
✎
cable.
P
POWER
P . MODE S.MODE P . SIZE
Screen
Coarse / Fine ■ : Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse ) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the centre of screen.
Position ■ : Adjust the PC screen position with direction
button ( / / / ).
Image Reset ■ : Resets the image to default settings.
Using Y our TV as a Computer (PC) Display
Setting Up Y our PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung
Dealer .)
1. Click on “Control Panel” on the W indows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear .
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution) [Optimum: 1360 X y
768 pixels]
If a vertical-frequency option exists on your display y
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
Sound Menu
Changing the Preset Sound Mode ¦
Mode
t
Standard ■ : Selects the normal sound
mode.
Music ■ : Emphasizes music over voices.
Movie ■ : Provides the best sound for
movies.
Clear Voice ■ : Emphasizes voices over other sounds.
Amplify ■ : Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
Adjusting sound settings ¦
Equalizer
Adjusts the sound mode.
Balance L/R ■ : Adjusts the balance between the right and
left speaker .
100Hz / 300Hz / 1kHz / 3kHz / 10kHz ■ (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Reset ■ : Resets the equalizer to its default settings.
Sound Systems, Etc. ¦
Virtual Surround (Off / On)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using
HRTF (Head Related T ransfer Function) technology.
If
✎
Speake r Select i s set to Exte rnal Sp eaker, Virtu al
Surround is disab led.
Dialog Clarity (Off / On)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly when viewing a show .
Audio Language
(digital channels only)
Change the default value for audio languages.
The avail able lang uage may dif fer de pending o n the
✎
broad cast.
Audio Format (MPEG / Dolby Digital 5.1)
(digital channels only)
When sound is emitted from both the main speaker and the
audio receiver , a sound echo may occur due to the decoding
speed difference between the main speaker and the audio
receiver . In this case, use the TV Speaker function.
Audio For mat
✎
option may di ffer de pendin g on the
broadca st. 5. 1ch Dolby digita l sound is on ly availab le
when co nnecting a n extern al speake r through an
optical c able.
17
English
03 Basic Features
Audio Description
(not available in all locations)
(digital channels only)
This function handles the Audio Stream
for the AD (Audio Description) which is
sent along with the Main audio from the
broadcaster .
Audio Description (Off / On) ■ : T urn the audio description
function on or off.
Volume ■ : Adjust the audio description volume.
Auto Volume (Of f / Normal / Night)
T o equalize the volume level on each channel, set to Normal .
Night ■ : This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External speaker /
TV speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver . In
this case, set the TV to External Speaker .
When
✎
Speake r Select i s set to Exte rnal Sp eaker, the
volume an d MUTE buttons wi ll not operate a nd the
sound set tings wil l be limited.
When
✎
Speake r Select i s set to Exte rnal Sp eaker, you
should use these settings.
TV sp eaker: O ff , Ex ternal s peaker : On
x
When
✎
Speake r Select i s set to TV Sp eaker, you
should use these se ttings.
TV sp eaker: On , E xter nal spe aker: On
x
If there is no v ideo sig nal, both spe akers will b e mute.
✎
Additional Setting
(digital channels only)
DTV Audio Level (MPEG / HE-AAC) ■ : This function
allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV
broadcast) to a desired level.
Accordi ng to the type of b roadcast s ignal,
✎
MPEG
/ HE-A AC can be adju sted betwe en -1 0dB and
0dB.
To increase or dec rease the vo lume, adjus t
✎
betwee n the range 0 a nd -1 0 respec tively.
SPDIF Output ■ : SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player .
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital .
By conne cting to 5.1 ch spea kers in a Dolby
✎
Digita l setup, max imize your inter active 3D sou nd
experience.
Audio Delay: Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver .
Dolby Digital Comp (Line / RF) ■ : This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select
✎
Line to obtain dyn amic soun d, and RF
to reduce the d iffere nce bet ween loud a nd soft
sounds at n ight time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Selecting ¦ the Sound Mode
When you set to Dual l-ll , the current
sound mode is displayed on the screen.
Audio
T ype
Dual I-II Default
A2
Stereo
Mono Mono
Automatic
change
Stereo
Stereo Mono
Dual
Dual I Dual II
Dual I
NICAM
Stereo
Mono Mono
Automatic
change
Stereo
Mono Stereo
Dual
Mono Dual I
Dual II
Dual I
If the stereo s ignal is we ak and an auto matic switchi ng,
✎
occurs, t hen switch to the m ono.
Only acti vated in stereo s ound sign al.
✎
Only avai lable whe n the
✎
Input source is se t to TV.
ADGUIDE
MEDIA.P
P . MODE S.MODE P . SIZE
P
POWER
MEDIA.P
DUAL
I-II
P . MODE S.MODE P . SIZE
Setup Menu
Setting the Time ¦
Time
Clock ■ : Setting the clock is for using various timer
features of the TV .
The current time will appear every time you press
O
the INFO button.
If you disco nnect the p ower cord, you have to se t
✎
the clock a gain.
Clock Mode (Auto / Manual)
Depen ding on the bro adcast st ation and sig nal,
✎
the auto time s et up may not be cor rect. In this
case, set th e time manua lly.
The anten na must be co nnected in o rder to set
✎
the time auto maticall y.
Clock Set: Set the Day , Month, Year , Hour and Minute
manually.
Available o nly when
✎
Clock Mo de is set to
Manual.
Time Zone: Y ou can select your time zone.
This feat ure is only avai lable in Au stralia.
✎
Th
✎
is functi on is only ava ilable wh en Clock M ode
is set to Auto .
Depen ding on the bro adcast st ation and sig nal,
✎
the auto time may not be set correctly. If this
occurs, set the time manually.
Using the Sleep Timer ¦
Sleep Timer ■
t
: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
To cancel
✎
Sleep T imer, select Off .
Setting the On / Off Timer ¦
Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off
timer settings can be made. Y ou must set the clock first.
On Time / Off Time: Set the hour , minute, and activate
/ inactivate. (T o activate timer with the setting you’ve
chosen, set to Activate .)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select ATV or
DTV.
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
If there is no m usic fil e on the USB dev ice or the
✎
folder c ontainin g a music fi le is not sele cted, the
Timer functi on does not o perate corr ectly.
When the re is only on e photo file in th e USB
✎
devic e, the Slide S how will not pl ay.
If a folder n ame is too long, t he folder c annot be
✎
selected.
Each USB you u se is assi gned its own fo lder.
✎
When us ing more tha n one of the sam e type of
USB, make sure t he folder s assigne d to each USB
have dif ferent nam es.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual , you can set up the day you want to
activate the timer .
The
✎ c
mark ind icates the day i s selecte d.
Auto Power Of f (available o nly when t he TV is tu rned on
✎
by Timer): Th e TV will b e automatic ally turn ed off af ter 3
hours of be ing lef t idle to prevent ove rheatin g.
Locking Programs ¦
Security
The PIN inp ut screen a ppears b efore the setu p screen.
✎
Enter your 4-d igit PIN, the de fault of whi ch is “0-0 -0- 0”.
✎
Change th e PIN using th e Change PI N option.
Child Lock (Off / On) ■ : Lock channels in Channel
Manager, to prevent unauthorized users, such as
children, from watching unsuitable programme.
Available o nly when t he
✎
Input source is se t to TV.
Parental Lock (Parental Rating) ■ : Prevent unauthorized
users, such as children, from watching unsuitable
programme with a user-defined 4-digit PIN code. If
the selected channel is locked, the “
\
” symbol will be
displayed.
Allow All: Unlock all TV ratings.
The items of
✎
Parental Lo ck diffe rs depe nding on
the countr y.
Timer 1
Volume
Inactivate
Inactivate
Sun Mon Tue Thu Fri Sat
Source Antenna Channel
Repeat
L
Move
U Adjust E
Enter
R
Return
19
English
03 Basic Features
Change PIN ■ : Change your personal ID number required
to set up the TV .
If you forget th e PIN code, pres s the remote
✎
control bu ttons in the fo llowing se quence, w hich
resets the PIN to “0 -0- 0-0”: POWER (off)
MUTE 8 2 4 POWER (on).
Other Features ¦
Language
Menu Language ■ : Set the menu language.
T eletext Language ■ : Set a desired language for teletext.
English i s the defaul t in cases w here the sel ected
✎
langua ge is unavail able in the b roadcast.
Preference (Primary Audio Language / Secondary ■
Audio Language / Primary Subtitle Language /
Secondary Subtitle Language / Primary T eletext
Language / Secondary T eletext Language): Select
a language, which will be the default language when a
channel is selected.
Subtitle
Use this menu to set the Subtitle mode.
The subti tle feature do esn’t work in
✎
Component or HDMI modes.
Subtitle (Off / On) ■ : Switches subtitles
on or off.
Mode (Normal / Hearing Impaired) ■ : Sets the subtitle
mode.
Subtitle Language ■ : Sets the subtitle language.
If the progr amme you are watc hing does n ot
✎
suppor t the Hearing Impaired func tion, Normal
automatic ally acti vates even if the H earing
Impaired mode is se lected.
English i s the defaul t in cases w here the sel ected
✎
langua ge is unavail able in the b roadcast.
Digital T ext (Disable / Enable) (UK only)
If the programme broadcasts with digital text, this feature is
enabled.
General
Game Mode (Off / On) ■ : When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting game
mode.
NOTE
✎
Precauti ons and lim itations fo r
x
game mod e
T o disconnect the game console and connect –
another external device, set Game Mode to Off in
the setup menu.
If you display the TV menu in – Game Mode , the
screen shakes slightly.
Game Mo de
x
is not availa ble in T V and PC mode.
After connecting
x
the game c onsole, set G ame Mode
to On to prevent poo r picture qu ality.
If
x
Game Mo de is On : Picture mode is s et to
Standard and Sound mode is set to Cus tom.
Menu T ransparency (Bright / Dark) ■ : Se t the
T ransparency of the menu.
Melody (Off / Low / Medium / High) ■ : Set so that a
melody plays when the TV is turned on or off.
Common Interface
CI Menu ■ : This enables the user to select from the CAM-
provided menu. Select the CI Menu based on the menu
PC Card.
Application Info. ■ : View information on the CAM inserted
into the CI slot and on the “CI or CI+ CARD” which is
inserted into the CAM. Y ou can install the CAM anytime
whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by
phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the
direction of the arrow .
3. Insert the CAM with the “CI or CI+ CARD” into the
common interface slot, in the direction of the arrow so
that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal
channel.
P
POWER
AD GUIDE
MEDIA.P
SUBT .
DUAL
I-II
P . MODE S.MODE P . SIZE
Picture In Picture (PIP) ¦
PIP
t
Watches simultaneously the TV tuner and one external video
source. PIP (Picture-in-Picture) does not function in the same
mode.
NOTE
✎
If you turn the T V off w hile watchin g in
x
PIP mode, the
PIP window w ill disap pear.
You may notice that the pi cture in the PIP w indow
x
becom es slightl y unnatura l when you us e the main
screen to vi ew a game or k araoke.
PIP settin gs
x
Main picture Sub picture
Component, HDMI1/DVI,
HDMI2, HDMI3, PC
TV
PIP (Off / On) ■ : Activate or deactivate the PIP function.
Size ( ■
Õ
/
Ã
): Select a size for the sub-picture.
Position ( ■
Ã
/
–
/
—
/
œ
): Select a position for the
sub-picture.
Channel ■ : Select the channel for the sub-screen.
Sound Select (Main / Sub) ■
: Y ou can choose the
desired sound (Main / Sub ) in PIP mode.
Support Menu
Self Diagnosis
Picture T est (Y es / No) ■ : Use to check for picture
problems and if the problem continues to occur check
the colour pattern.
Sound T est (Yes / No) ■ : Use the built-in melody sound to
check for sound problems.
If you hear n o sound from t he TV’s spea kers,
✎
before per formi ng the sound te st, make sure
Speake r Select i s set to TV sp eaker in the
Sound menu.
The mel ody will be h eard duri ng the test even i f
✎
Speake r Select i s set to Exte rnal Sp eaker or the
sound is mu ted by pressi ng the MUTE bu tton.
Signal Information ■ : (digital channels only) HDTV
channel’ s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
T roubleshooting ■ : If the TV seems to have a problem,
refer to this description.
If none of the se trouble shooting ti ps apply, contact
✎
the Samsu ng custome r serv ice centre.
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or by downloading the latest firmware from
samsung.com to a USB memory device.
Current Version the softwar e already installed in the TV .
Soft ware is repre sented as “Year/Month /Day_Version”.
✎
Installing the Latest Version
By USB ■ : Insert a USB drive
containing the firmware
upgrade file, downloaded
from www.samsung.com,
into the TV . Please be careful
not to disconnect the power
or remove the USB drive
until upgrades are complete.
The TV will be turned off
and on automatically after
completing the firmware
upgrade. When software is upgraded, video and audio
settings you have made will return to their default
settings. We advise you to to write down your settings
so that you can easily reset them after the upgrade.
Software Upgrade
Current Version 2010/01/18_000001
U Move E Enter R Return
By Channel
Alternative Software ----/--/--/--_------
TV Side Panel
USB Drive
21
English
03 Basic Features
By Channel ■ : Upgrade the software using the
broadcasting signal.
If the func tion is sel ected duri ng the soft ware
✎
transmi ssion pe riod, sof tware will b e automatic ally
search ed and down loaded.
The time re quired to down load the sof tware is
✎
determin ed by the sign al status.
Standby Mode Upgrade ■ : A manual upgrade will be
automatically performed at selected time. Since the
power of the unit is turned on internally, the screen
may be turned on slightly for the LCD product. This
phenomenon may continue for more than 1 hour until
the software upgrade is complete.
Alternative ■ Software (backup): If there is an issue with
the new firmware and it is affecting operation, you can
change the software to the previous version.
If
✎
the soft ware was cha nged, exis ting soft ware is
displayed.
HD Connection Guide
Refer to this information when connecting external devices
to the TV .
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. Y ou can find
information regarding our call centres, and how to download
products and software.
22
English
Advanced Features
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1360 X 768 @ 60 Hz.
Mode Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H/V)
IBM
640 x 350 31.469 70.086 25.175 + / -
720 x 400 31.469 70.087 28.322 - / +
MAC
640 x 480 35.000 66.667 30.240 - / -
832 x 624 49.726 74.551 57.284 - / -
VESA DMT
640 x 480
31.469 59.940 25.175 - / -
37.861 72.809 31.500 - / -
37.500 75.000 31.500 - / -
800 x 600
37.879 60.317 40.000 + / +
48.077 72.188 50.000 + / +
46.875 75.000 49.500 + / +
1024 x 768
48.363 60.004 65.000 - / -
56.476 70.069 75.000 - / -
60.023 75.029 78.750 + / +
1280 x 720 45.000 60.000 74.250 + / +
1360 x 768 47.712 60.015 85.500 + / +
VESA CVT
720 x 576 35.910 59.950 32.750 - / +
1280 x 720 56.456 74.777 95.750 - / +
VESA GTF 1280 x 720 52.500 70.000 89.040 - / +
NOTE
✎
For HDMI/ DVI cable co nnectio n, you must use th e
x
HDMI IN 1(DVI) j ack.
The inter lace mode i s not suppor ted.
x
The set mi ght operate a bnormal ly if a non-st andard vi deo forma t is selecte d.
x
Separate a nd Compos ite modes ar e suppor ted. SOG(Sy nc On Gree n) is not suppor ted.
x
AUDIO OUT
AUDIO OUT
DVI OUT
PC OUT
Advanced Features
23
English
04 Advanced Features
Media Play
Connecting a USB Device ¦
1. Turn on your TV .
2. Connect a USB device containing photo, music and/or movie files to the USB
(HDD) jack on the side of the TV .
3. When USB is connected to the TV, popup window appears. Then you can
select Media Play .
It might not wo rk proper ly with unl icense d multimed ia files .
✎
Need-to-K now List be fore using
✎
Media Pl ay
MTP (Med ia Transfer Protocol) i s not suppor ted.
x
The fil e system suppo rts FAT 16, FA T32 and NTFS.
x
Cert ain typ es of USB Digi tal came ra and audi o device s may not be comp a tible with th is TV.
x
Media Pl ay only supp orts USB M ass Storag e Class (MSC) d evices. M SC is a Mass Stor age Class B ulk-Only
x
Transport de vice. Exa mples of MS C are Thumb d rives, Fla sh Card Read ers and US B HDD (USB HU B are not
suppor ted). Devic es should b e connec ted directl y to the TV’s USB por t.
Before con necting yo ur device to th e TV, please bac k up your file s to prevent them f rom damag e or loss of dat a.
x
SAMSUNG i s not respon sible for any d ata file da mage or dat a loss.
Connec t a USB HDD to the de dicated po rt, USB (HDD) p ort.
x
Do not disc onnect th e USB device w hile it is lo ading.
x
The high er the reso lution of the i mage, the lon ger it takes to di splay on the s creen.
x
The ma ximum sup ported J PEG resolut ion is 15360X8640 pi xels.
x
For unsup ported o r corrupte d files, the “ Not Suppor ted File Fo rmat” me ssage is di splayed.
x
If the file s are sor ted by Basic V iew, up to 1000 files ca n be displ ayed in each fol der.
x
MP3 file s with DRM th at have been d ownloade d from a non-fre e site cann ot be played. Dig ital Rig hts Manage ment
x
(DRM) is a tec hnolog y that suppo rts the cre ation of conte nt, the distrib ution and ma nageme nt of the conten t in an
integrated a nd compre hensive way, inclu ding the protec tion of the rig hts and intere sts of the conte nt provider s, the
preventio n of the illega l copying of c ontents, as wel l as managi ng billing s and settl ements.
If more than 2 P TP device s are conn ected, you can o nly use on e at a time.
x
If more than t wo MSC devi ces are con nected, som e of them may not be r ecognize d. A USB devic e that require s high
x
power (more tha n 500m A or 5V) may n ot be suppor ted.
If an over-power war ning mess age is disp layed whil e you are conn ecting or us ing a USB dev ice, the devi ce may not
x
be recog nized or may ma lfuncti on.
If the TV h as been no i nput dur ing time set in A uto Protection T ime, the Scree nsaver wil l run.
x
If a USB exten sion cab le is used, the U SB device m ay not be recog nized or the f iles on the d evice may not b e read.
x
If a USB devi ce conne cted to the TV i s not recogn ized, the list of f iles on the d evice is co rrupted or a f ile in the lis t is
x
not played, co nnect the U SB device to the P C, format the dev ice and ch eck the con nection.
If a file de leted from th e PC is still foun d when Med ia Play is run, u se the “Empt y the Recycl e Bin” functi on on the PC
x
to perman ently del ete the file.
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
MEDIA.P
P . MODE S.MODE P . SIZE
USB Drive
TV Side Panel
Change Device
View Devices
E
Enter
R
Return
Videos
24
English
Advanced Features
Screen Display ¦
Move to the desired file using the up/down/right/left buttons and then press the ENTER
E
or
(Play) button. The file is
played.
Suppor ts the
✎
Device M ode and Contents Mode in Medi a Play homepage.
Videos
Playing a Video
1. Press the or button to select Videos, then press the ENTER
E
button in the Media Play menu.
2. Press the button to select the desired video in the file list.
3. Press the ENTER
E
button or
(Play) button.
The selected file is displayed on the top with its playing time. –
If video time information is unknown, play time and pregress bar are not displayed. –
During video playback, you can search using – and button.
In this mod e, you can enjoy m ovie clips c ontaine d on a Game,
✎
but you can not play the Ga me itself.
Supported Subtitle Formats y
Name File extension Format
MPEG-4 time-based text .ttxt XML
SAMI .smi HTML
SubRip .srt string-based
SubViewer .sub string-based
Micro DVD .sub or .txt string-based
Information:
You can ascertain the selected
file name and the number of files
and page.
Sort List Section:
Displays the sorting standard.
The sorting standard is
✎
different depending on the
contents.
Operation Buttons
Red (Change Device ): Selects a connected device.
Green (Preference ): Sets the file preference. (not supported in Basic view)
Yellow (Select ): Selects multiple files fr om file list. Selected files are marked with a symbol.
Blue (Sorting ): Selects the sort list.
T
T ools: Displays the option menu.
Using the
✎
or
μ
button, file list can move to next or previous page.
File List Section:
You can confirm the files and
groups that are sorted by
category.
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
/Movie 01.avi 1/1
Movie 01.avi
SUM
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 09.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
Select
Sorting
T
T ools
Videos
Change Device
Movie 01.avi
00:04:03 / 00:07:38 1/1
SUM
E
L
Jump
T
Tools
R
Return
25
English
04 Advanced Features
Supported Video Formats y
File Extention Container Video Codec Resolution
Frame rate
(fps)
Bit rate
(Mbsp)
Audio Codec
*.avi
*.mkv
AVI
MKV
Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8
MP3 / AC3 / LPCM /
ADPCM / DTS HD
XviD 1920x1080 6 ~ 30 8
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
*.asf ASF
Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8
MP3 / AC3 / LPCM /
ADPCM / WMA
XviD 1920x1080 6 ~ 30 8
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
*.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA
*.mp4 MP4
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
MP3 / ADPCM / AAC MPEG4 SP / ASP 1920x1080 6 ~ 30 8
XVID 1920x1080 6 ~ 30 8
*.3gp 3GPP
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
ADPCM / AAC / HE-AAC
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
*.vro
VRO
VOB
MPEG1 1920x1080 24 / 25 / 30 30
AC3 / MPEG / LPCM
MPEG2 1920x1080 24 / 25 / 30 30
*.mpg
*.mpeg
PS
MPEG1 1920x1080 24 / 25 / 30 30
AC3 / MPEG / LPCM / AAC MPEG2 1920x1080 24 / 25 / 30 30
H.264 1920x1080 6 ~ 30 25
*.ts
*.tp
*.trp
TS
MPEG2 1920x1080 24 / 25 / 30 30
AC3 / AAC / MP3 / DD+ /
HE-AAC
H.264 1920x1080 6 ~ 30 25
VC1 1920x1080 6 ~ 30 25
Other Restrictions
NOTE
✎
If there are p roblems w ith the conten ts of a codec, the c odec will n ot be suppor ted.
x
If the infor mation for a Co ntainer i s incorre ct and the fi le is in erro r, the Container wi ll not be able to pl ay
x
correctly.
Sound or v ideo may not wo rk if the conte nts have a stand ard bitrate/f rame rate above t he compatib le Fram/sec
x
listed in the t able above.
If the Index Table is in e rror, the Seek (Jump) fun ction is not su pporte d.
x
Video Decoder Audio Decoder
Supports up to H.264, Level 4.1•
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not •
supported.
H.263 is not supported.•
GMC 2 over is not support. •
Supports up to WMA 7, 8, 9, STD•
WMA 9 PRO does not support 2 channel excess multi channel or •
lossless audio.
WMA sampling rate 22050Hz mono is not supported.•
26
English
Advanced Features
Playing movie continuously (Resume Play)
If you exit the playing movie function, the movie can be played later from the point where it was stopped.
1. Select the movie file you want to play continuously by pressing the
or button to select it from the file list section.
2. Press the
(Play) / ENTER
E
button.
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
The Blu e button is avai lable wh en resumi ng play.
✎
If the
✎
Cont. mov ie play hel p function i s set to On in the
Settings menu, a po p-up mess age will a ppear wh en you
resume p lay a movie fi le.
Music
Playing a Music
1. Press the or button to select Music, then press the
ENTER
E
button in the Media Play menu.
2. Press the button to select the desired Music in the file list.
3. Press the ENTER
E
button or
(Play) button.
During music playback, you can search using – and button.
– (REW) and
μ
(FF) buttons do not function during play.
Only dis plays fil es with the MP 3 file exte nsion. Oth er file
✎
extensi ons are not dis played, even i f they are saved o n the same
USB devic e.
If the sound i s strange w hen playi ng MP3 file s, adjust the
✎
Equalizer in the Sound me nu. (An over-modul ated MP3 fil e may
cause a so und proble m.)
Photos
Viewing a Photo (or Slide Show)
1. Press the or button to select Photos, then press the
ENTER
E
button in the Media Play menu.
2. Press the button to select the desired photo in the file list.
3. Press the ENTER
E
button or
(Play) button.
While a photo list is displayed, press the (Play)/ – ENTER
E
button
on the remote control to start slide show .
All files in the file list section will be displayed in the slide show. –
During the slide show, files are displayed in or der from currently –
being shown.
Music f iles can b e automatica lly played d uring the Sl ide Show if th e
✎
Background Music is set to On.
The
✎
BGM Mode c annot be ch anged unt il the BGM has f inishe d
loading.
3/15
I Love you
Jhon
Music 1
No Singer
Music 2
No Singer
Music 3
No Singer
Music 4
No Singer
Music 5
No Singer
I Love Yo u
Jhon
1st Album
Pop
2010
4.2MB
01:10 / 04:02
SUM
E
L
Jump
T
Tools
R
Return
Movie 01.avi
00:04:03 / 00:07:38 1/1
SUM
Play continuously
E
Pause
L
Jump
T
Tools
R
Return
Resumes playing from the last viewed
scene.
Image1024.jpg 1024x768 2010/2/1 3/15
SUM
E
L
T
Tools
R
Return
Normal
27
English
04 Advanced Features
Playing the multiple files ¦
Playing the selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
NOTE
✎
The (
x
c
) mark ap pears to the le ft of the se lected fi les.
To cancel a sele ction, pres s the yellow bu tton again.
x
To deselect all s elected f iles, pre ss the
x
TOOLS bu tton and
select Desele ct All.
3. Press the
(Play) / ENTER
E
button.
Playing the video/music/photo file group
1. While a file list is displayed, move to the any file in desired group.
2. Press the TOOLS button and select Play Current Group.
Media Play Additional Function ¦
Sorting the file list
Press the blue button in the file list to sort the files.
Category Operation Videos Music Photos
Basic View
Displays the whole folder. Y ou can view the photo by selecting the folder.
✓ ✓ ✓
Title
Sorts and displays the file title in Symbol/Number/Alphabet/Special order .
✓ ✓ ✓
Preference
Sorts and displays the file by preference. Y ou can change the file preference in the file
list section using the Green button.
✓ ✓ ✓
Latest Date
Sorts and shows files by the latest date.
✓ ✓
Earliest Date
Sorts and shows files by the earliest date.
✓ ✓
Artist
Sorts the music file by artist in alphabetical order .
✓
Album
Sorts the music file by album in alphabetical order .
✓
Genre
Sorts music files by the genre.
✓
Mood
Sorts music files by the mood. You can change the music mood information.
✓
Monthly
Sorts and shows photo files by month.
✓
1/1
/Movie 01.avi
SUM
Movie 01.avi
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 09.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
Change Device
Select Sorting
T
Tools
Videos
28
English
Advanced Features
Videos/Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category Operation Videos Music Photos
Title You can move the other file directly.
✓
Repeat Mode You can play movie and music files repeatedly.
✓ ✓
Picture Size
(Mode1 / Mode2 / Original)
You can adjust the pictur e size to your preference.
✓
Picture Setting You can adjust the picture setting. (p. 13, 14, 15, 16)
✓ ✓
Sound Setting Y ou can adjust the sound setting. (p. 16, 17)
✓ ✓ ✓
Subtitle Setting Y ou can play the video with Subtitles. This function only works if the subtitles are the
same file name as the video.
✓
Audio You can enjoy video in one of supported languages as required. The function is only
enabled when stream-type files which support multiple audio formats are played.
✓
Stop Slide Show /
Start Slide Show
You can start or stop a Slide Show .
✓
Slide Show Speed Y ou can select the slide show speed during the slide show.
✓
Background Music You can set and select background music when watching a Slide Show .
✓
Zoom You can zoom into images in full screen mode.
✓
Rotate Y ou can rotate images in full screen mode.
✓
Information You can see detailed information about the played file.
✓ ✓ ✓
Settings
Using the Setup Menu
Cont. movie play help (resume play) (On / Off) ■ : Select to display the help pop-up message for continuous movie
playback.
Get the DivX ■
®
VOD registration code: Shows the registration code authorized for the TV . If you connect to the DivX web
site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD
registration using Media Play, the registration is completed.
For more info rmation on D ivX
✎
®
VOD, visit w ww.DivX.com.
Get the DivX ■
®
VOD deactivation code: When DivX
®
VOD is not registered, the registration deactivation code is
displayed. If you execute this function when DivX
®
VOD is registered, the current DivX
®
VOD registration is deactivated.
Information ■ : Select to view information about the connected device.
29
English
04 Advanced Features
Anynet
+
What is Anynet
+
?
t
Anynet
+
is a function that enables you to control all connected Samsung devices that support Anynet
+
with your Samsung TV’ s
remote. The Anynet
+
system can be used only with Samsung devices that have the Anynet
+
feature. T o be sure your Samsung
device has this feature, check if there is an Anynet
+
logo on it.
T o connect to Home Theatre
1. Connect the HDMI IN (1(DVI), 2, or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet
+
device using
an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet
+
device using an
HDMI cable.
NOTE
✎
Connec t the Optica l cable be tween the
x
DIGITAL AUDIO O UT (OPTICA L) jack on you r TV and th e Digita l Audio Inpu t
on the Home T heatre.
When fol lowing the co nnectio n above, the Optic al jack on ly outputs 2 c hannel a udio. You will only he ar sound
x
from the Ho me Theatre’s Front Lef t and Right s peakers a nd the subwoofe r. If you want to hear 5.1 channel audio,
connect the DIGITAL AUDIO OUT (OP TICAL) jac k on the DVD / satell ite box (i.e. Anynet De vice 1 or 2) dire ctly to the
Amplif ier or Ho me Theatre, not t he TV.
Connect only one Home Theatre.
x
You can connect a n Anynet
x
+
device u sing the HDM I cable. So me HDMI cab les may not su pport A nynet
+
functions.
Anynet
x
+
works whe n the AV device sup portin g Anynet
+
is in the sta ndby or on statu s.
Anynet
x
+
suppor ts up to 12 AV devices in total. Note that yo u can conn ect up to 3 devic es of the sam e type.
Anynet
+
Menu
The Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected to the TV .
Anynet
+
Menu Description
View TV Changes Anynet
+
mode to TV broadcast mode.
Device List Shows the Anynet
+
device list.
Recording: (*recorder) Starts recording immediately using the recorder . (This is only available for devices that
support the recording function.)
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear .
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear .
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver .
If more than one recording device is connected, they are displayed as (*r ecorder) and if only one recording device is
connected, it will be represented as (*device_name).
Anynet
+
Device 1
HDMI Cable
HDMI Cable
TV
Optical Cable
Home Theatre
Anynet
+
Device 2, 3
30
English
Advanced Features
Setting Up Anynet ¦
+
Setup ■
Anynet
+
(HDMI-CEC) (Off / On): T o use the Anynet
+
Function, Anynet
+
(HDMI-CEC) must be set to On.
When the
✎
Anynet
+
(HDMI-CEC) function i s disable d, all the Any net
+
related op erations a re deactiva ted.
Auto T urn Off (No / Yes): Setting an Anynet
+
Device to turn off automatically when the TV is turned off.
The acti ve source on the T V must b e set to TV to use th e Anynet
✎
+
function.
Even if an ex ternal dev ice is still r ecording, i t may turn of f.
✎
Switching between Anynet ¦
+
Devices
1. Anynet
+
devices connected to the TV are listed.
If you cann ot find a devi ce you want, pres s the red but ton to refresh th e list.
✎
2. Select a device and press the ENTER
E
button. Y ou can switch to the selected device.
Only wh en you set
✎
Anynet
+
(HDMI-CEC) to On in the Application menu, the Devi ce List me nu appea rs.
Switchin g to the selec ted device may t ake up to 2 minutes. You cann ot cancel t he operati on during t he switching
x
operation.
If you have sel ected exter nal inpu t mode by pres sing the
x
SOURCE button, you ca nnot use the A nynet
+
functio n.
Make sure to swi tch to an Anynet
+
device by u sing the Dev ice List .
Recording ¦
Y ou can make a recording of a TV programme using a Samsung recorder .
1. Select Recording.
When the re are more tha n two recor ding devic es
✎
When mul tiple rec ording dev ices are co nnected, th e recordin g devices a re listed. Sel ect one rec ording dev ice in
x
the Devic e List .
When the re cording d evice is not d isplayed, se lect
✎
Device L ist and pre ss the Red bu tton to searc h devices.
2. Press the EXIT button to exit.
You can record the so urce strea ms by select ing
✎
Recording: (device _name).
Pressin g the
✎
(REC) but ton will reco rd whatever you ar e currentl y watching. If you ar e watching vid eo from
another d evice, the vi deo from th e device is re corded.
Before rec ording, che ck whethe r the antenna j ack is prope rly con nected to the rec ording dev ice. To properly
✎
connec t an antenna to a re cording d evice, refer to th e recordin g device’s users ma nual.