Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country |
Customer Care Centre |
Web Site |
AUSTRIA |
0810 - SAMSUNG (7267864, € 0.07/min) |
www.samsung.com/at |
BELGIUM |
02-201-24-18 |
www.samsung.com/be (Dutch) |
|
|
www.samsung.com/be_fr (French) |
CZECH |
800 - SAMSUNG (800-726786) |
www.samsung.com/cz |
|
Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8 |
|
DENMARK |
70 70 19 70 |
www.samsung.com/dk |
FINLAND |
030 - 6227 515 |
www.samsung.com/fi |
FRANCE |
01 48 63 00 00 |
www.samsung.com/fr |
GERMANY |
01805 - SAMSUNG (726-7864 € 0,14/Min) |
www.samsung.de |
HUNGARY |
06-80-SAMSUNG (726-7864) |
www.samsung.com/hu |
ITALIA |
800-SAMSUNG (726-7864) |
www.samsung.com/it |
LUXEMBURG |
261 03 710 |
www.samsung.com/lu |
NETHERLANDS |
0900-SAMSUNG (0900-7267864) (€ 0,10/Min) |
www.samsung.com/nl |
NORWAY |
815-56 480 |
www.samsung.com/no |
POLAND |
0 801 1SAMSUNG (172678) |
www.samsung.com/pl |
|
022-607-93-33 |
|
PORTUGAL |
80820-SAMSUNG (726-7864) |
www.samsung.com/pt |
SLOVAKIA |
0800-SAMSUNG (726-7864) |
www.samsung.com/sk |
SPAIN |
902 - 1 - SAMSUNG (902 172 678) |
www.samsung.com/es |
SWEDEN |
0771 726 7864 (SAMSUNG) |
www.samsung.com/se |
Turkey |
444 77 11 |
www.samsung.com/tr |
U.K |
0845 SAMSUNG (7267864) |
www.samsung.com/uk |
EIRE |
0818 717100 |
www.samsung.com/ie |
Switzerland |
0848 - SAMSUNG (7267864, CHF 0.08/min) |
www.samsung.com/ch |
|
|
www.samsung.com/ch_fr/(French) |
LITHUANIA |
8-800-77777 |
www.samsung.com/lt |
LATVIA |
8000-7267 |
www.samsung.com/lv |
ESTONIA |
800-7267 |
www.samsung.com/ee |
manual user TV LCD
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model _____________ Serial No. _____________
© 2010 Samsung Electronics Co., Ltd. All rights reserved. |
BN68-02542F-00 |
|
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Digital TV notice
1.Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.
2.DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.
3.Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.
4.Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business.
5.Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
6.For more information, please contact your local Samsung customer care centre.
The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
•Avoid displaying the same TV channel for long periods.
•Always try do display any image on full screen, use TV set picture format menu for best possible match.
•Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
•Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
x If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
The appearance may differ depending on the product.
|
Installation with a stand. |
|
Installation with a wall-mount. |
|
10 cm |
|
10 cm |
10 cm |
10 cm |
10 cm |
10 cm |
|
|
||
|
|
|
10 cm |
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
2 English
Contents
Getting Started
4
Connections
7
Basic Features
10
Advanced Features
22
Other Information
32
4Accessories
4Viewing the Control Panel 5 Viewing the Remote Control 6 Connecting to an Antenna 6 Plug & Play (Initial Setup)
7Connecting to an AV Device
8 Connecting to an Audio Device
9Changing the Input source
10 How to Navigate Menus
10 Using the INFO button (Now & Next guide)
10 Planning Your Viewing
12 Channel Menu
14 Picture Menu
16 Sound Menu
18 Setup Menu
20 Support Menu
22Connecting to a PC
23Media Play
29 Anynet+
32Analogue Channel Teletext Feature
33Installing the Wall Mount
34Anti-theft Kensington Lock
34Securing the TV to the wall
35Troubleshooting
38Specifications
39Index
Check the Symbol!
t
TOOLS |
This function can be used by |
Note |
One-Touch Button |
|
|||
|
pressing the TOOLS button on the |
|
|
|
remote control. |
|
|
ENGLISH
English 3
Getting Started
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items’ colours and shapes may vary depending on the models.
Cables not included in the package contents can be purchased separately
y |
Remote Control & Batteries (AAA x 2) |
y |
Cleaning Cloth |
y |
Warranty Card / Safety Guide (Not available in some locations) |
y |
Owner’s Instructions |
y Blanking Bracket
See separate guide for installing the stand. |
|
|
|
|
|
M4 X L12 |
|
|
or |
|
|
y Stand (1EA) |
y Guide Stand (1EA) |
y Screws (8EA) |
|
(LE32C530: 7EA) |
|||
|
|
Viewing the Control Panel
The product colour and shape may vary depending on the model.
|
Power Indicator |
Speakers |
Remote control sensor |
Remote control sensor |
Aim the remote control towards this spot on the TV. |
SOURCEE |
Toggles between all the available input sources. In the on-screen menu, use this |
|
button as you would use the ENTEREbutton on the remote control. |
MENU |
Displays an on-screen menu, the OSD (on screen display), of your TV’s features. |
Y |
Adjusts the volume. In the OSD, use the Ybuttons as you would use the |
|
◄ and ► buttons on the remote control. |
z |
Changes the channels. In the OSD, use the zbuttons as you would use the |
|
▼ and ▲ buttons on the remote control. |
Power Indicator |
Blinks and turns off when the power is on and lights up in standby mode. |
P(Power) |
Turns the TV on or off. |
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
4 English
Viewing the Remote Control
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons.
POWER |
SOURCE |
|
Turns the TV on and off. |
Displays and selects the available video |
|
sources (P. 9). |
||
|
HDMI 
Have direct access to channels.
Alternately selects Teletext, Double or
Mix.
MUTE
Adjusts the volume.
CH LIST
Opens the OSD.
MENU
Displays Media Play (USB) (P. 23). |
MEDIA.P |
GUIDE |
Selects the HDMI mode directly.
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays channel lists on the screen (P. 12).
Displays the EPG (Electronic Programme Guide) (P. 10).
Quickly select frequently used functions.
Selects the on-screen menu items and changes the values seen on the menu.
Returns to the previous menu.
These buttons are for the
Channel Manager,
Media Play (USB) menu, etc.
Use these buttons in Media Play(USB) and Anynet+ (HDMI-CEC)modes (P.23, 29).
( : Controls recording for Samsung recorders that have the Anynet+ feature)
Installing batteries (Battery size: AAA)
TOOLS |
INFO |
Displays information on the TV screen. |
||
|
|
|
|
|
RETURN |
EXIT |
Exits the menu. |
||
P.MODE: Press to select the picture mode (p. 14).
S.MODE: Press to select the sound mode (p. 16).
DUAL I-II: Sound effect selection (p. 18). AD: Turns the audio description on and off (p. 17). This is not available in some locations.
P.SIZE: Selects the picture size (P. 15). SUBT.: Displays digital subtitles (P. 19).
NOTE
xUse the remote control within 23 feet from the TV.
xBright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs.
xThe colour and shape may vary depending on the model.
English 5
Started Getting 01
Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.Preset: Connecting the mains and antenna.
VHF/UHF Antenna
Cable
|
|
|
|
|
ANT OUT |
|
|
or |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
1 |
Selecting a language |
Press the ▲ or ▼ button, then press the ENTEREbutton. |
|
Select the desired OSD (On Screen Display) language. |
|
2 |
Selecting Store Demo or |
Press the ◄ or ► button, then press the ENTEREbutton. |
Home Use |
• Select the Home Use mode. Store Demo Mode is for retail environments. |
• Return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When the OSD volume is displayed, press and hold MENU for 5 sec.
POWER
P
3
4
5
6
7
8
9
Selecting a country |
Press the ▲ or ▼ button, then press the ENTEREbutton. |
|
Select the appropriate country. |
|
After selecting the country in the Country menu, some models may proceed with an additional option to |
|
setup the pin number. |
|
When you input the PIN number, 0-0-0-0 is not available. |
Selecting an antenna |
Press the ▲ or ▼ button, then press the ENTEREbutton. |
|
Select Air, Cable or Satellite. |
Selecting a channel |
Press the ▲ or ▼ button, then press the ENTEREbutton. |
|
Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing |
|
you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → |
|
Auto Store (p. 12). |
|
Press the ENTEREbutton at any time to interrupt the memorization process. |
Setting the Clock Mode |
Set the Clock Mode automatically or manually. |
|
Press the ▲ or ▼ button to select Auto, then press the ENTEREbutton. |
Time Zone |
Press the ▲ or ▼ button to select the your time zone, then press the ENTEREbutton. (depending on the |
|
country) |
Viewing the |
The connection method for the best HD screen quality is displayed. |
HD Connection Guide. |
|
Enjoy your TV. |
Press the ENTEREbutton. |
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.
6 English
Connections
Connecting to an AV Device
Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, STB satellite receiver (STB)
|
|
|
|
|
|
|
|
|
DVD / |
DVD / |
||
|
R |
|
W |
Blu-ray player |
Blu-ray player |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Red |
White |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
HDMI OUT |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
DVI OUT |
|
|
|
|
|
|
|
|
|
|
|
R |
AUDIO OUT |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
W |
R-AUDIO-L |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
HDMI IN 1(DVI), 2, 3, PC/DVI AUDIO IN
x When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the PC/DVI AUDIO IN jacks for audio.
xIf an external device such as a DVD / Blu-ray player / Cable Box / STB satellite receiver supporting a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour).
xIf there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If the version is older than 1.3, contact the provider of the corresponding device to confirm the HDMI version and request an upgrade.
xIt is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur.
Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable
Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver
VCR / DVD EXT
VIDEO OUT
Y |
Y |
|
|
|
|
|
|
|
|
AUDIO OUT |
|
|
|
|
W |
|
|
|
W |
|
|
|
|||
|
|
|
|||||
R-AUDIO-L |
R |
|
|
|
|||
|
|
|
|
R |
|
||
R |
|
W |
|
R |
|
B |
|
G |
|
|
|
|
|
AUDIO OUT |
COMPONENT OUT |
|||
R-AUDIO-L |
PR |
PB |
Y |
|
DVD / Blu-ray player
|
|
|
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
B |
G |
|||
|
R |
|
|
W |
|
|
R |
|
|
B |
|
|
G |
|
|
R |
|
|
W |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Y |
|
|
|
|
|
|||||||||||||||||||||||||||||
Red |
White |
Red |
Blue |
Green |
Red |
White Yellow |
|
|
|
|
|||||||||||||||||||||||||||||||
In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
To obtain the best picture quality, the Component connection is recommended over the A/V connection.
Connections 02
English 7
Connections
Connecting to an Audio Device
Using an Optical (Digital) or Headphones Connection
Available devices: digital audio system, amplifier, DVD home theatre
digital audio system
OPTICAL
DIGITAL AUDIO OUT (OPTICAL)
xWhen a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.
x5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xWhen the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.
xSound function may be restricted when connecting headphones to the TV.
xHeadphone volume and TV volume are adjusted separately.
8 English
CONNECTIONS COMMON INTERFACE Slot
To watch paid channels, the “CI or CI+ CARD” must be inserted.
yIf you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”.
yThe pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
yWhen the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.
NOTE
xYou must obtain a “CI or CI+ CARD” from a local cable service provider.
xWhen removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.
xInsert the “CI or CI+ CARD” in the direction marked on the card.
xThe location of the COMMON INTERFACE slot may be different depending on the model.
x“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
xIf you have any problems, please contact a service provider.
xInsert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.
Connections 02
Changing the Input source
Source List
Use to select TV or other external input |
SOURCE |
sources such as DVD / Blu-ray players / |
|
cable box / STB satellite receiver connected |
|
to the TV. |
|
TV / Ext. / AV / Component / PC / HDMI1/DVI / HDMI2 / HDMI3 / USB
In the Source List, connected inputs will be highlighted.
Ext. and PC always stay activated.
Edit Name
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set to DVI PC or
DVI Devices mode under Edit Name.
English 9
Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
MENU
MEDIA.P 
3
TOOLS INFO
1
2 |
|
RETURN |
EXIT |
4 |
|
|
|
1ENTERE/ Direction button: Move the cursor and select an item. Confirm the setting.
2RETURN button: Returns to the previous menu.
3MENU button: Displays the main on-screen menu.
4EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1 |
MENU m |
The main menu options appear on |
the screen: |
||
|
|
Picture, Sound, Channel, Setup, |
2 |
|
Input, Application, Support. |
▲ / ▼ |
Select an icon with the ▲ or ▼ |
|
|
button. |
|
3 |
ENTER E |
Press ENTEREto access the |
|
sub-menu. |
|
4 |
▲ / ▼ |
Select the desired submenu with |
|
the ▲ or ▼ button. |
|
5 |
◄ / ► |
Adjust the value of an item with the |
|
◄ or ► button. The adjustment in |
the OSD may differ depending on the selected menu.
6ENTER E Press ENTEREto complete theconfiguration.
7 |
EXIT e |
Press EXIT. |
|
Using the INFO button (Now & Next guide)
The display identifies the current channel |
INFO |
and the status of certain audio-video |
|
settings. |
|
The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time.
yScroll ◄, ► to view information for a desired
programme while watching the current channel.
yScroll ▲, ▼ to view information for other channels. If you want to move to the currently selected channel, press the ENTEREbutton.
|
DEF |
|
|
18:11 Thu 6 Jan |
||
|
DTV Air |
|
Life On Venus Avenue |
18:00 ~ 6:00 |
|
|
15 |
|
Unclassified |
EWatch |
|||
|
No Detaild Information |
|
|
Information |
||
|
|
|||||
|
|
Planning Your Viewing |
||||
Guide |
|
|
|
|
|
|
The EPG (Electronic Programme Guide) |
GUIDE |
|||||
information is provided by broadcasters. |
||||||
Using programme schedules provided |
|
|
|
|||
by broadcasters, you can specify |
|
|
|
|||
programmes you want to watch in |
|
|
|
|||
advance so that the channel automatically |
|
|
|
|||
changes to the selected programme |
|
|
|
|||
channel at the specified time. Programme |
|
|
|
|||
entries may appear blank or out of date depending on a |
||||||
channel status. |
|
|
|
|
|
|
Using Channel View |
|
|
|
|||
|
Guide |
|
|
|
2:10 Tue 1 Jun |
|
|
|
DTV Air 800 five |
|
|
|
|
|
|
Home and Away |
|
|
|
|
|
|
18:00 - 18:30 |
|
|
|
|
|
|
Drama |
|
|
|
|
|
800 five |
Dani is devastated when scott makes clear his views on marriage... |
||||
|
Channel View - TV |
|
|
|
|
|
|
Today |
18:00 - 19:00 |
19:00 - 20:00 |
|||
|
|
|
|
|
|
|
|
View Mode |
|
+24 Hours |
|
Ch. Mode |
Information kPage EWatch |
|
|
|
||||
|
|
|
1 2 3 4 5 6
10 English
Using Scheduled View
Guide |
|
|
|
|
|
|
2:10 Tue 1 Jun |
|
|
DTV Air 800 five |
|
|
|||
|
|
Family Affairs |
|
|
|||
|
|
18:00 - 18:30 |
|
|
|
|
|
|
|
Drama |
|
|
|||
800 five |
|
Tanya confesses all to a stunned Babs. Conrad is anxious to hear... |
|||||
Scheduled View |
|
|
|
|
|
|
|
18:30 |
Today |
|
|
|
|
|
|
|
)Family Affairs |
800 |
five |
||||
19:15 |
Today |
|
)Dark Angel |
800 |
five |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
View Mode |
Information ECancel |
|
|
|
|
|
|
|||
1 4 6
1
Red (View Mode): View the list of programmes that are playing now or coming up.
2
Yellow (+24 Hours): Viewing the list of programmes to be broadcasted after 24 hours.
3
Blue (Ch. Mode): Select the type of channels you want to display on the Channel View window. (All, TV, Radio, Data/Other, My Channel 1~4)
4Information: Displays details of the selected programme.
5
(Page): Move to next or previous page.
6ENTEREbutton.
–When selecting the current programme, you can watch the selected programme.
–When selecting the future programme, you can reserve to watch the selected programme. To cancel the schedule, press the ENTEREbutton again and select Cancel Schedules.
Channel Manager
Delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the
Channels, My Channels or Scheduled screen.
|
|
|
|
|
c1 |
|
1futech |
|
|
Channels |
|
All |
2 |
|
* 24ore.tv |
|
|||
|
3 |
|
BBC World |
|
|||||
|
Radio |
|
|
||||||
|
|
TV |
15 |
|
abc1 |
r |
|||
|
|
Data/Other |
23 |
|
bid-up.tv |
|
|||
|
|
Analogue |
33 |
|
Boonerang |
|
|||
|
|
32 |
|
Cartoon Nwk |
|
||||
|
|
|
|
|
|
|
|||
|
|
|
|
|
5 |
|
Class News |
|
|
|
|
|
|
|
4 |
|
\ Coming Soon |
|
|
|
|
|
|
|
27 |
|
Discovery |
|
|
Air |
|
Antenna |
|
Zoom |
|
Select |
|
Sort kPage TTools |
|
|
B |
|
|
||||||
Channels: Shows the channel list according to channel type.
*My Channels: Shows the group of the channel.
Scheduled: Shows all the currently reserved programmes.
Using the colour buttons with the Channel Manager.
x
Red (Antenna): Toggle among Air or Cable.
xB Green (Zoom): Enlarges or shrinks a channel
number.
x 
Yellow (Select): Select desired channels and press the Yellow button to set all the selected channels at the same time. The cmark appears to the left of the selected channels.
x 
Blue (Sort): Change the list ordered by channel name or channel number.
xk(Page): Move to next or previous page.
xT(Tools): Displays the Channel Manager option menu. (The options menus may differ depending on the situation.)
Channel Status Display Icons
Icons 
Operations
A An analogue channel. c A channel selected.
*
A channel set as a Favourite.
( A programme currently being broadcast.
\
A locked channel.
) A reserved programme.
Features Basic 03
English 11
Basic Features
¦ Using Favourite Channels
* My Channels
(in Channel Manager) Shows all favourite channels.
Edit My Channels t: You can set the selected channels to desired my channels group.
The “*” symbol will be displayed and the channel will be set as a my channel.
1.Select a channel and press the TOOLS button.
2.Add or delete a channel in the my channel groups you want among 1, 2, 3 and 4.
x One or more groups can be selected.
3.After you have changed the settings, the channel list for each group can be viewed in my channels.
|
|
|
|
|
c1 |
|
|
1futech |
|
|
Channels |
|
All |
2 |
|
* 24ore.tv |
|
||||
|
3 |
|
|
BBC World |
||||||
|
TV |
Lock |
||||||||
|
|
15 |
|
|
abc1 |
|
||||
|
|
|
|
Edit My Channels |
r |
|||||
|
|
Radio |
23 |
Timer Viewing |
|
|||||
|
|
Data/Other |
|
|
bid-up.tv |
|
||||
|
|
|
|
Edit Channel Number |
|
|||||
|
|
Analogue |
33 |
Delete |
Boonerang |
|||||
|
|
|
|
|
32 |
DeselectCartoonAll |
Nwk |
|||
|
|
|
|
|
5 |
|
|
Class News |
||
|
|
|
|
|
|
|
|
|
▼ |
|
|
|
|
|
|
4 |
|
\ Coming Soon |
|||
|
|
|
|
|
27 |
|
|
Discovery |
||
Air |
|
Antenna |
|
Zoom |
|
Select |
|
Sort |
kPage |
TTools |
|
B |
|
|
|||||||
|
|
|
|
|||||||
Channel List
You can see all the channels searched. |
CH LIST |
|
Channel Menu
¦ Retuning Channels
Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
12 English
Country
The PIN input screen appears. Enter your 4 digit PIN number.
Analogue Channel: Change the country for analogue channels.
Digital Channel: Change the country for digital channels.
Auto Store
Scans for a channel automatically and stores in the TV.
Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.
Antenna Source (Air / Cable): Select the antenna source to memorise.
Channel Source (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.
When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV.
If you select Quick, you can set up the Network, Network ID, Frequency, Modulation and
Symbol Rate manually by pressing the button on the remote control.
Network (Auto / Manual): Select Auto if you want the TV to automaticity retrieve the Network ID or Manual if you want to enter ID manually.
Network ID: When Network is set to Manual, you can assign the Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel. (differs in each country)
Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates.
Manual Store
Scans for a channel manually and stores in the TV.
If a channel is locked using the Child Lock function, the PIN input window appears.
Digital Channel: When scanning has finished, channels are updated in the channel list.
When selecting Antenna → Air: Channel, Frequency, Bandwidth
When selecting Antenna → Cable: Frequency, Modulation, Symbol Rate
Analogue Channel (Programme, Colour System, Sound System, Channel, Search): If there is abnormal sound or no sound, reselect the sound standard required.
Channel mode
x P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You
can select a channel by entering the position number in this mode.
xC (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
¦Editing Channels
Channel Manager Option Menu
(in Channel Manager)
1.Select a channel and press the TOOLS button.
2.Edit the channel name or number using the
Edit Channel Name or Edit Channel Number menu.
Edit Channel Name (analogue channels only): Assign your own channel name.
Edit Channel Number (digital channels only): Edit the number by pressing the number buttons desired.
¦ Other Features
Cable Search Option
(depending on the country)
Sets additional search options such as the frequency and symbol rate for a cable network search.
Freq.Start / Freq.Stop: Set the start or stop frequency (differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Channel Manager
Channel Manager Option Menu
Set each channel using the Channel Manager menu options (Lock / Unlock, Timer Viewing, Sort, Delete, Select All / Deselect All). Option menu items may differ depending on the channel status.
1.Select a channel and press the TOOLS button.
2.Select a function and change its settings.
Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed.
NOTE
x This function is available only when the Child Lock is set to On.
xThe PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.
Timer Viewing: You can set a desired channel to be displayed automatically at the reserved time. Set the current time first to use this function.
When a digital channel is selected, press the ► button to view the digital Programme.
Sort (analogue channels only): This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.
Delete: You can delete a channel to display the channels you want.
Select All / Deselect All: Select all the channels or deselect all the selected channels in the channel manager.
Channel List Transfer
The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function.
Import from USB: Import channel list from USB.
Export to USB: Export channel list to USB. this function is available when USB is connected.
Scheduled
(in Channel Manager)
You can view, modify or delete a show you have reserved to watch.
Change Info: Change a show you have reserved to watch.
Cancel Schedules: Cancel a show you have reserved to watch.
Information: Display a show you have reserved to watch. (You can also change the reservation information.)
Select All / Deselect All: Select or deselect all reserved programmes.
Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel manually.
Fine tuned channels are marked with an asterisk “*”.
To reset the fine-tuning, select Reset.
English 13
Features Basic 03
Basic Features
Picture Menu
¦ Changing the Preset Picture Mode
Mode |
|
|
Select your preferred picture type. |
P.MODE |
|
Dynamic: Suitable for a bright room. |
||
|
||
Standard: Suitable for a normal |
|
|
environment. |
|
Natural: Suitable for reducing eye strain.
Natural is not available in PC mode.
Movie: Suitable for watching movies in a dark room.
¦ Adjusting Picture Settings
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
x In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available.
xIn PC mode, you can only make changes to
Backlight, Contrast and Brightness.
xSettings can be adjusted and stored for each external device connected to the TV.
¦Economical Solutions
Eco Solution
Energy Saving (Off / Low / Medium / High / Picture Off / Auto) t: Adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.
Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room.
If you adjust the Backlight, the Eco Sensor will be set to Off.
Min Backlight: When Eco sensor is On, the minimum screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity.
No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal.
Disabled when the PC is in power saving mode.
¦ Changing the Picture Options
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including colour and contrast.
In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance.
Advanced Settings
Black Tone |
: Off |
► |
Dynamic Contrast |
: Medium |
|
Shadow Detail |
: -2 |
|
Gamma |
: 0 |
|
RGB Only Mode |
: Off |
|
Colour Space |
: Native |
|
White Balance |
|
|
|
▼ |
|
|
UMove EEnter |
RReturn |
Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
Shadow Detail (-2~+2): Increase the brightness of dark images.
Gamma: Adjust the primary colour intensity.
RGB Only Mode (Off / Red / Green / Blue): You can adjust Colour or Tint (G/R) of Red, Green or Blue for the picture from an external device (DVD player, home theatre, etc.).
Colour Space (Auto / Native): Adjust the range of colours available to create the image.
14 English
White Balance: Adjust the colour temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
Flesh Tone: Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On): Emphasize object boundaries.
Picture Options
In PC mode, you can only make changes to the Colour Tone, Size and Auto Protection Time.
Picture Options
Colour Tone |
: Normal |
► |
Size |
:Auto Wide |
|
Screen Mode |
: 16:9 |
|
Digital Noise Filter |
: Auto |
|
MPEG Noise Filter |
:Auto |
|
HDMI Black Level |
: Normal |
|
Film Mode |
: Off |
|
|
▼ |
|
|
UMove EEnter |
RReturn |
Colour Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.
Settings can be adjusted and stored for each external device connected to an input on the TV.
Size: Your cable box/satellite receiver
may have its own set of screen sizes as P.SIZE
well. However, we highly recommend you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
Adjusts the Position or Size by using ▲, ▼ button.
4:3 : The default setting for a movie or normal broadcasting.
Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
NOTE
x Depending on the input source, the picture size options may vary.
xThe available items may differ depending on the selected mode.
xIn PC mode, only 16:9 and 4:3 modes can be adjusted.
xSettings can be adjusted and stored for each external device connected to an input on the TV.
xAfter selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Adjusts the Position or Size by using ▲, ▼, ◄, ► button.
xIf you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.
Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.
Not available in PC, Component or HDMI mode.
Features Basic 03
English 15
Basic Features
Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter.
Only available for analogue channels.
MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.
HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
Auto Protection Time (2 hours / 4 hours / 8 hours / 10 hours / Off): If the screen remains idle with a still image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of ghost images on the screen.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
¦ Setting up the TV with Your PC
Set the input source to PC.
Auto Adjustment t
Adjust frequency values/positions and fine tune the settings automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen.
Position: Adjust the PC screen position with direction button (▲ / ▼ / ◄ / ►).
Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.)
1.Click on “Control Panel” on the Windows start menu.
2.Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-box will appear.
3.Click on “Display” and a display dialog box will appear.
4.Navigate to the “Settings” tab on the display dialog-box.
yThe correct size setting (resolution) [Optimum: 1920 X 1080 pixels]
yIf a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
Sound Menu
¦ Changing the Preset Sound Mode
Mode |
|
|
Standard: Selects the normal sound |
S.MODE |
|
mode. |
||
|
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.
16 English
¦ Adjusting Sound Settings
Equalizer
Adjusts the sound mode (standard sound mode only).
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
Audio Description
(not available in all locations) (digital |
AD |
channels only) |
This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.
Audio Description (Off / On): Turn the audio description function on or off.
Volume: Adjust the audio description volume.
Features Basic 03
¦ Sound Systems, Etc.
Virtual Surround (Off / On)
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.
Dialog Clarity (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly.
Audio Language
(digital channels only)
Change the default value for audio languages.
The available language may differ depending on the broadcast.
Audio Format
(digital channels only)
When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
Audio Format option may differ depending on the broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an optical cable.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.
Speaker Select (External Speaker / TV Speaker / Headphone)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
When Speaker Select is set to External Speaker. x TV speaker: Off , External speaker: On
When Speaker Select is set to TV Speaker. x TV speaker: On , External speaker: On
If there is no video signal, both speakers will be mute.
Additional Setting
(digital channels only)
DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
English 17
Basic Features
SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.
Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience.
Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).
Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
¦ Selecting the Sound Mode
When you set to Dual f-g, the current |
DUAL |
sound mode is displayed on the screen. |
|
Audio |
Dual f-g |
Default |
|
|
Type |
|||
|
|
|
||
A2 |
Mono |
Mono |
Automatic |
|
Stereo |
Stereo ↔ Mono |
change |
||
Stereo |
||||
Dual |
Dual f↔ Dual g |
Dual f |
||
|
||||
|
Mono |
Mono |
Automatic |
|
NICAM Stereo |
Mono ↔ Stereo |
change |
||
Stereo |
Dual |
Mono ↔ Dual f |
Dual f |
|
|
Dual g |
|||
|
|
|
||
If the stereo signal is weak and an automatic switching, occurs, then switch to the mono.
Only activated in stereo sound signal.
Only available when the Input source is set to TV.
Setup Menu
¦ Setting the Time
Time
Clock: Setting the clock is for using various timer features of the TV.
O The current time will appear every time you press the INFO button.
If you disconnect the power cord, you have to set the clock again.
Clock Mode (Auto / Manual)
Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.
The antenna must be connected in order to set the time automatically.
Clock Set: Set the Day, Month, Year, Hour and
Minute.
Available only when Clock Mode is set to
Manual.
Time Zone (depending on the country): Select your time zone.
When Country is set to Others, you can use this function.
This function is only available when the
Clock Mode is set to Auto.
¦Using the Sleep Timer
Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
To cancel Sleep Timer, select Off.
¦ Setting the On / Off Timer
Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first.
Timer 1
On Time
▲ |
|
|
|
|
|
|
|
00 |
|
|
|
|
|
00 |
|
|
|
||
Inactivate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
▼ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off Time |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inactivate |
|
|
|
|
|
|
|
00 |
|
|
|
|
|
00 |
|
|
|
||
Volume |
|
Source |
|
|
|
|
Antenna |
|
|
Channel |
|||||||||
10 |
|
|
|
|
|
TV |
|
|
|
ATV |
|
|
1 |
|
|
||||
Repeat |
|
|
|
Sun |
Mon |
|
|
Tue |
Wed |
|
Thu |
|
Fri |
|
Sat |
||||
Once |
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LMove |
|
UAdjust |
EEnter |
RReturn |
|||||||||||
18 English
On Time / Off Time: Set the hour, minute, and activate / inactivate. (To activate timer with the setting you’ve chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select ATV or
DTV.
Channel (when the Source is set to TV): Select the desired channel.
Contents (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically.
NOTE
x If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly.
xWhen there is only one photo file in the USB device, the Slide Show will not play.
xIf a folder name is too long, the folder cannot be selected.
xEach USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer.
The cmark indicates the day is selected.
Auto Power Off (available only when the TV is turned on by Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.
¦ Locking Programs
Security
The PIN input screen appears before the setup screen.
Enter your 4-digit PIN, the default of which is “0-0-0-0.” Change the PIN using the Change PIN option.
Child Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme.
Available only when the Input source is set to TV.
Parental Lock: (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If selected channel is locked, the “\” symbol will be displayed.
Allow All: Unlock All TV ratings (Not supported in France).
When Parental Lock is set to 18, the PIN input screen appears before changing the channels (France only).
Change PIN: Change your personal ID number required to set up the TV.
If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to “0-0-0-0”: POWER (off) →
MUTE → 8 → 2 → 4 → POWER (on).
¦ Other Features
Language
Menu Language: Set the menu language.
Teletext Language: Set a desired language for teletext.
English is the default in cases where the selected language is unavailable in the broadcast.
Preference (Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language): Select a language, which will be the default language when a channel is selected.
Subtitle |
|
|
Use this menu to set the Subtitle mode. |
SUBT. |
|
Subtitle (Off / On): Switches subtitles |
||
|
||
on or off. |
|
Mode (Normal / Hearing Impaired):
Sets the subtitle mode.
Subtitle Language: Sets the subtitle language.
If the programme you are watching does not support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected.
English is the default in cases where the selected language is unavailable in the broadcast.
Features Basic 03
English 19
Basic Features
Digital Text (Disable / Enable)
(UK only)
If the programme broadcasts with digital text, this feature is enabled.
General
Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.
NOTE
x Precautions and limitations for game mode
–To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
–If you display the TV menu in Game Mode, the screen shakes slightly.
xGame Mode is not available when the input source is set to TV or PC.
xAfter connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality.
xIf Game Mode is On:
–Picture mode is set to Standard and Sound mode is set to Movie.
–Equalizer is not available.
Menu Transparency (Bright / Dark): Set the Transparency of the menu.
Melody (Off / Low / Medium / High): Set so that a melody plays when the TV is turned on or off.
¦ Picture In Picture (PIP)
PIP t
You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.
NOTE
x For PIP sound, refer to the Sound Select instructions.
xIf you turn the TV off while watching in PIP mode, the PIP window will disappear.
xYou may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
xPIP settings
Main picture |
Sub picture |
|
Component, HDMI1/DVI, |
TV |
|
HDMI2, HDMI3, PC |
||
|
PIP (Off / On): Activate or deactivate the PIP function.
Channel: Select the channel for the sub-screen.
Size (Õ/ Ã): Select a size for the sub-picture.
Position (Ã/ –/ —/ œ): Select a position for the sub-picture.
Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode.
Support Menu
Common Interface
CI Menu: This enables the user to select from the CAMprovided menu. Select the CI Menu based on the menu PC Card.
Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off.
1.Purchase a CI CAM module at your nearest dealer or by phone.
2.Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.
3.Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot.
4.Check if you can see a picture on a scrambled signal channel.
Self Diagnosis
Self Diagnostic might take few seconds, this is part of the normal operation of the TV
Picture Test (Yes / No): Use to check for picture problems.
Sound Test (Yes / No): Use the built-in melody sound to check for sound problems.
If you hear no sound from the TV’s speakers, before performing the sound test, make sure
Speaker Select is set to TV Speaker in the Sound menu.
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.
20 English
Signal Information: (digital channels only) HDTV channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.
Troubleshooting: If the TV seems to have a problem, refer to this description.
If none of these troubleshooting tips apply, contact the Samsung customer service centre.
Software Upgrade
Software Upgrade can be performed via a broadcasting signal or downloading the latest firmware from samsung.com to a USB memory device.
Current Version the software already installed in the TV.Software is represented as “Year/Month/Day_Version”.
Software Upgrade
Current Version |
2009/01/18_000001 |
By USB |
► |
By Channel |
|
Standby Mode Upgrade |
: 45 Min |
Alternative Software |
2009/01/15_00000 |
UMove EEnter RReturn
Installing the Latest Version
By USB: Insert a USB drive
containing the firmware upgrade file, downloaded from “www.samsung. com,” into the TV. Please
be careful not to disconnect the power or remove the
USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade.
By Channel: Upgrade the software using the broadcasting signal.
If the function is selected during the software transmission period, software will be automatically searched and downloaded.
The time required to download the software is determined by the signal status.
Standby Mode Upgrade: A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.
Alternative Software (backup): If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.
If the software was changed, existing software is displayed.
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software.
Features Basic 03
English 21
Advanced Features
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
DVI OUT
AUDIO OUT
PC OUT
AUDIO OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode |
Resolution |
Horizontal Frequency |
Vertical Frequency |
Pixel Clock Frequency |
Sync Polarity |
|
(KHz) |
(Hz) |
(MHz) |
(H / V) |
|||
|
|
|||||
IBM |
640 x 350 |
31.469 |
70.086 |
25.175 |
+/- |
|
720 x 400 |
31.469 |
70.087 |
28.322 |
-/+ |
||
|
||||||
|
640 x 480 |
35.000 |
66.667 |
30.240 |
-/- |
|
MAC |
832 x 624 |
49.726 |
74.551 |
57.284 |
-/- |
|
|
1152 x 870 |
68.681 |
75.062 |
100.000 |
-/- |
|
|
720 x 576 |
35.910 |
59.950 |
32.750 |
-/+ |
|
VESA CVT |
1152 x 864 |
53.783 |
59.959 |
81.750 |
-/+ |
|
1280 x 720 |
56.456 |
74.777 |
95.750 |
-/+ |
||
|
||||||
|
1280 x 960 |
75.231 |
74.857 |
130.000 |
-/+ |
|
|
640 x 480 |
31.469 |
59.940 |
25.175 |
-/- |
|
|
640 x 480 |
37.861 |
72.809 |
31.500 |
-/- |
|
|
640 x 480 |
37.500 |
75.000 |
31.500 |
-/- |
|
|
800 x 600 |
37.879 |
60.317 |
40.000 |
+/+ |
|
|
800 x 600 |
48.077 |
72.188 |
50.000 |
+/+ |
|
|
800 x 600 |
46.875 |
75.000 |
49.500 |
+/+ |
|
|
1024 x 768 |
48.363 |
60.004 |
65.000 |
-/- |
|
|
1024 x 768 |
56.476 |
70.069 |
75.000 |
-/- |
|
|
1024 x 768 |
60.023 |
75.029 |
78.750 |
+/+ |
|
VESA DMT |
1152 x 864 |
67.500 |
75.000 |
108.000 |
+/+ |
|
1280 x 1024 |
63.981 |
60.020 |
108.000 |
+/+ |
||
|
||||||
|
1280 x 1024 |
79.976 |
75.025 |
135.000 |
+/+ |
|
|
1280 x 720 |
45.000 |
60.000 |
74.250 |
+/+ |
|
|
1280 x 800 |
49.702 |
59.810 |
83.500 |
-/+ |
|
|
1280 x 800 |
62.795 |
74.934 |
106.500 |
-/+ |
|
|
1280 x 960 |
60.000 |
60.000 |
108.000 |
+/+ |
|
|
1360 x 768 |
47.712 |
60.015 |
85.500 |
+/+ |
|
|
1440 x 900 |
55.935 |
59.887 |
106.500 |
-/+ |
|
|
1440 x 900 |
70.635 |
74.984 |
136.750 |
-/+ |
|
|
1680 x 1050 |
65.290 |
59.954 |
146.250 |
-/+ |
|
VESA GTF |
1280 x 720 |
52.500 |
70.000 |
89.040 |
-/+ |
|
1280 x 1024 |
74.620 |
70.000 |
128.943 |
-/- |
||
|
||||||
VESA DMT / DTV CEA |
1920 x 1080p |
67.500 |
60.000 |
148.500 |
+/+ |
NOTE
xFor HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
xThe interlace mode is not supported.
xThe set might operate abnormally if a non-standard video format is selected.
xSeparate and Composite modes are supported. SOG(Sync On Green) is not supported.
22 English
Media Play
MEDIA.P |
Enjoy photos, music and/or movie fi les saved on a |
|
USB Mass Storage Class (MSC) device. |
||
|
MediaPlay
Videos
SUM |
|
Change Device |
|
View Devices EEnter RReturn |
|
|
|||
|
¦ Connecting a USB Device
1. |
Turn on your TV. |
|
TV Side Panel |
|
|
|
|||
2. |
Connect a USB device containing photo, music and/or movie fi les to the USB |
|
|
|
|
(HDD) jack on the side of the TV. |
|
|
|
|
|
|
||
3. |
When USB is connected to the TV, popup window appears. Then you can select |
|
|
|
USB Drive |
||||
|
Media Play. |
|||
|
|
|
||
It might not work properly with unlicenced multimedia files.
Need-to-Know List before using Media Play (USB) x MTP (Media Transfer Protocol) is not supported. x The file system supports FAT16, FAT32 and NTFS.
x Certain types of USB Digital camera and audio devices may not be compatible with this TV.
xMedia Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.
xBefore connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
xConnect a USB HDD to the dedicated port, USB (HDD) port.
xDo not disconnect the USB device while it is loading.
xThe higher the resolution of the image, the longer it takes to display on the screen.
xThe maximum supported JPEG resolution is 15360X8640 pixels.
xFor unsupported or corrupted files, the “Not Supported File Format” message is displayed.
xIf the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
xMP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
xIf more than 2 PTP devices are connected, you can only use one at a time.
xIf more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported.
xIf an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.
xIf the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
xThe power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
xIf a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
xIf a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection.
xIf a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC to permanently delete the file.
Features Advanced 04
English 23
Advanced Features
¦ Screen Display
Move to the file you desired using the up/down/right/left buttons and then press the ENTEREor (Play) button. The file is played.
Supports the View Devices and Home in Media Play homepage.
Information: 
You can ascertain the selected
file name and the number of files and page.
Sort List Section: 
Displays sorting standard.
Sorting standard is different depending on the contents.
Videos |
|
|
|
Page |
||
|
|
Movie 01.avi |
|
Movie 02.avi |
||
|
|
Jan.10.2010 |
|
|
|
Jan.10.2010 |
|
|
Movie 03.avi |
|
Movie 04.avi |
||
|
|
Jan.10.2010 |
|
|
|
Jan.10.2010 |
|
|
Movie 05.avi |
|
Movie 06.avi |
||
|
|
Jan.10.2010 |
|
|
|
Jan.10.2010 |
|
|
Movie 07.avi |
|
Movie 08.avi |
||
|
|
Jan.10.2010 |
|
|
|
Jan.10.2010 |
|
|
Movie 09.avi |
|
Movie 10.avi |
||
|
|
Jan.10.2010 |
|
|
|
Jan.10.2010 |
|
|
Change Device |
|
|
|
|
|
|
|
|
|
|
|
File List Section:
You can confirm the files and groups that is sorted by each category.
Operation Buttons
Red (Change Device): Selects a connected device.
B Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.
Blue (Sorting): Selects the sort list. TTools: Displays the option menu.
Using the (REW) or µ(FF) button, file list can move to next or previous page.
Videos
Playing Video
1.Press the ◄ or ► button to select Videos, then press the ENTEREbutton in the Media Play menu.
2.Press the ◄/►/▲/▼ button to select the desired file in the file list.
3.Press the ENTEREbutton or (Play) button.
–The selected file is displayed on the top with its playing time.
–If video time information is unknown, play time and progress bar are not displayed.
–During playing the video, you can search using the ◄ and ► button.
In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself.
y Supported Subtitle Formats
Name |
File extension |
Format |
MPEG-4 time-based text |
.ttxt |
XML |
SAMI |
.smi |
HTML |
SubRip |
.srt |
string-based |
SubViewer |
.sub |
string-based |
Micro DVD |
.sub or .txt |
string-based |
00:04:03 / 00:07:38 |
1/1 |
Movie 01.avi
SUM |
EPause LJump TTools RReturn |
24 English
ySupported Video Formats
File Extention 
Container 
*.avi |
AVI |
|
*.mkv |
MKV |
|
*.asf |
ASF |
|
*.wmv |
ASF |
|
*.mp4 |
MP4 |
|
*.3gp |
3GPP |
|
*.vro |
VRO |
|
VOB |
||
|
||
*.mpg |
PS |
|
*.mpeg |
||
|
||
*.ts |
|
|
*.tp |
TS |
|
*.trp |
|
Other Restrictions
NOTE
Video Codec |
Resolution |
Frame rate |
Bit rate |
Audio Codec |
||
(fps) |
(Mbps) |
|||||
|
|
|
||||
Divx 3.11 / 4.x / 5.1 / 6.0 |
1920x1080 |
6 |
~ 30 |
8 |
|
|
XviD |
1920x1080 |
6 |
~ 30 |
8 |
MP3 / AC3 / LPCM / |
|
|
|
|
|
|
||
H.264 BP / MP / HP |
1920x1080 |
6 |
~ 30 |
25 |
ADPCM / DTS Core |
|
|
||||||
MPEG4 SP / ASP |
1920x1080 |
6 |
~ 30 |
8 |
|
|
Divx 3.11 / 4.x / 5.1 / 6.0 |
1920x1080 |
6 |
~ 30 |
8 |
|
|
XviD |
1920x1080 |
6 |
~ 30 |
8 |
MP3 / AC3 / LPCM / |
|
|
|
|
|
|
||
H.264 BP / MP / HP |
1920x1080 |
6 |
~ 30 |
25 |
ADPCM / WMA |
|
|
||||||
MPEG4 SP / ASP |
1920x1080 |
6 |
~ 30 |
8 |
|
|
Window Media Video v9 |
1920x1080 |
6 |
~ 30 |
25 |
WMA |
|
H.264 BP / MP / HP |
1920x1080 |
6 |
~ 30 |
25 |
|
|
MPEG4 SP / ASP |
1920x1080 |
6 |
~ 30 |
8 |
MP3 / ADPCM / AAC |
|
XVID |
1920x1080 |
6 |
~ 30 |
8 |
|
|
H.264 BP / MP / HP |
1920x1080 |
6 |
~ 30 |
25 |
ADPCM / AAC / HE-AAC |
|
MPEG4 SP / ASP |
1920x1080 |
6 |
~ 30 |
8 |
||
|
||||||
MPEG1 |
1920x1080 |
24 / 25 / 30 |
30 |
AC3 / MPEG / LPCM |
||
MPEG2 |
1920x1080 |
24 / 25 / 30 |
30 |
|||
|
||||||
MPEG1 |
1920x1080 |
24 / 25 / 30 |
30 |
|
||
MPEG2 |
1920x1080 |
24 / 25 / 30 |
30 |
AC3 / MPEG / LPCM / AAC |
||
H.264 |
1920x1080 |
6 |
~ 30 |
25 |
|
|
MPEG2 |
1920x1080 |
24 / 25 / 30 |
30 |
|
||
H.264 |
1920x1080 |
6 ~ 30 |
25 |
AC3 / AAC / MP3 / DD+ / |
||
HE-AAC |
||||||
|
|
|
|
|
||
VC1 |
1920x1080 |
6 ~ 30 |
25 |
|
||
xIf there are problems with the contents of a codec, the codec will not be supported.
xIf the information for a Container is incorrect and the file is in error, the Container will not be able to play correctly.
xSound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
xIf the Index Table is in error, the Seek (Jump) function is not supported.
|
Video Decoder |
|
Audio Decoder |
• Supports up to H.264, Level 4.1 |
• Supports up to WMA 7, 8, 9, STD |
||
• |
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not |
• |
WMA 9 PRO does not support 2 channel excess multi channel or |
|
supported. |
|
lossless audio. |
• |
GMC is not supported. |
• |
WMA sampling rate 22050Hz mono is not supported. |
•H.263 is not supported.
Features Advanced 04
English 25
Advanced Features
Playing movie file continuously (Resume Play)
If you exit the playing videos function, it can be played later from the point where it was stopped.
1.Select the movie file you want to play continuously by pressing the ◄ or ► button to select it from the file list section.
2.Press the (Play) / ENTEREbutton.
3.Select Play Continuously (Resume Play) by pressing the Blue button. The Movie will begin to play from where it was stopped.
The Blue button is available when resuming play.
If the Cont. movie play help function is set to On in the Settings menu, a pop-up message will appear when you resume play a movie file.
00:04:03 / 00:07:38 |
1/1 |
Movie 01.avi
Play continuously
Resumes playing from the last viewed scene.
SUM |
|
Play continuously EPause LJump TTools RReturn |
Music
Playing Music
1.Press the ◄ or ► button to select Music, then press the ENTEREbutton in the Media Play menu.
2.Press the ◄/►/▲/▼ button to select the desired file in the file list.
3.Press the ENTEREbutton or (Play) button.
–During playing the music, you can searcg using the ◄ and ► button.
–(REW) and µ (FF) buttons do not function during play.
Only displays the files with MP3 and PCM file extension. Other file extensions are not displayed, even if they are saved on the same USB device.
If the sound is strange when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)
Photos
Viewing a Photo (or Slide Show)
1.Press the ◄ or ► button to select Photos, then press the ENTEREbutton in the Media Play menu.
2.Press the ◄/►/▲/▼ button to select the desired file in the file list.
3.Press the ENTEREbutton or (Play) button.
–While a photo list is displayed, press the (Play) / ENTEREbutton on the remote control to start slide show.
–All files in the file list section will be displayed in the slide show.
–During the slide show, files are displayed in order from currently being shown.
Music files can be automatically played during the Slide Show if the Background Music is set to On.
The BGM Mode cannot be changed until the BGM has finished loading.
|
Playlist |
3/15 |
I Love You |
I Love you |
|
Jhon |
Jhon |
|
1st Album |
Music 1 |
|
No Singer |
|
|
Pop |
|
|
Music 2 |
|
|
2010 |
|
|
4.2MB |
No Singer |
|
|
Music 3 |
|
|
No Singer |
|
01:10 / 04:02 |
Music 4 |
|
|
No Singer |
|
|
Music 5 |
|
|
No Singer |
|
SUM |
EPause LJump TTools |
RReturn |
Normal |
Image1024.jpg |
1024x768 |
2010/2/1 |
3/15 |
SUM |
EPause LPrevious/Next TTools RReturn |
26 English
¦ Playing the Multiple Files
Playing the selected video/music/photo files
1.Press the Yellow button in the file list to select the desired file.
2.Repeat the above operation to select multiple files.
NOTE
x The cmark appears to the left of the selected files.
xTo cancel a selection, press the Yellow button again.
xTo deselect all selected files, press the TOOLS button and select Deselect All.
3.Press the TOOLS button and select Play Selected Contents.
Playing the video/music/photo file group
1.While a file list is displayed, move to the any file in desired group.
2.Press the TOOLS button and select Play Current Group.
Videos |
/Movie 01.avi |
|
2 files selected |
1/1 Page |
|||
|
|
Movie 01.avi |
Movie 02.avi |
|
|
||
|
|
Jan.10.2010 |
|
|
|
Jan.10.2010 |
|
|
|
Movie 03.avi |
Movie 04.avi |
|
|
||
|
|
Jan.10.2010 |
|
|
|
Jan.10.2010 |
|
|
|
Movie 05.avi |
Movie 06.avi |
|
|
||
|
|
Jan.10.2010 |
|
|
|
Jan.10.2010 |
|
|
|
Movie 07.avi |
Movie 08.avi |
|
|
||
|
|
Jan.10.2010 |
|
|
|
Jan.10.2010 |
|
|
|
Movie 09.avi |
Movie 10.avi |
|
|
||
|
|
Jan.10.2010 |
|
|
|
Jan.10.2010 |
|
SUM |
|
Change Device |
|
Select |
|
Sorting |
TTools |
¦ Media Play Additional Function
Sorting the file list
Press the Blue button in the file list to sort the files.
Category
Basic View
Title
Preference
Latest Date
Earliest Date
Artist
Album
Genre
Mood
Monthly
Operations
It shows whole folder. You can view the photo by selecting the folder.
It sorts and displays the file title in Symbol/Number/Alphabet/Special order.
It sorts and displays the file by preference. You can change the file preference in the file list section using the Green button.
It sorts and shows files by latest date.
It sorts and shows files by earliest date.
It sorts the music file by artist in alphabetical.
It sorts the music file by album in alphabetical order.
It sorts music files by the genre.
It sorts music files by the mood. You can change the music mood information.
It sorts and shows photo files by month. It sorts only by month (from January to December) regardless of year.
Videos |
Music |
Photos |
> |
> |
> |
> |
> |
> |
> |
> |
> |
> |
|
> |
> |
|
> |
|
> |
|
|
> |
|
|
> |
|
|
> |
|
|
|
> |
Features Advanced 04
English 27
Advanced Features
Videos/Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category |
Operations |
Title |
You can move the other file directly. |
Repeat Mode |
You can play movie and music files repeatedly. |
Picture Size |
You can adjust the picture size for preference. |
Picture Setting |
You can adjust the picture setting. (p. 14, 15, 16) |
Sound Setting |
You can adjust the sound setting. (p. 16, 17, 18) |
Subtitle Setting |
You can play the video file with Subtitle. This function only works if the subtitles are the same |
|
file name as the video file. |
Stop Slide Show / |
You can start or stop a slide show. |
Start Slide Show |
|
Slide Show Speed |
You can select the slide show speed during the slide show. |
Background Music |
You can set and select background music when watching a slide show. |
Zoom |
You can zoom into images in full screen mode. |
Rotate |
You can rotate images in full screen mode. |
Information |
You can see detailed information about the played file. |
Videos |
Music |
Photos |
> |
|
|
> |
> |
|
> |
|
|
> |
|
> |
> |
> |
> |
> |
|
|
|
|
> |
|
|
> |
|
|
> |
|
|
> |
|
|
> |
> |
> |
> |
Settings
Using the Setup Menu
Cont. movie play help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie playback.
Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD registration using Media Play, the registration is completed.
For more information on DivX® VOD, visit “www.DivX.com.”
Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
Information: Select to view information about the connected device.
28 English
Anynet+
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to Home Theatre
TV |
Anynet+ |
Home Theatre |
Anynet+ Device |
|
Device 1 |
2, 3 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HDMI Cable |
|
|
HDMI Cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HDMI Cable |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optical Cable |
|
HDMI Cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features Advanced 04
1.Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
2.Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
NOTE
x Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre.
xWhen following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.
xConnect only one Home Theatre.
xYou can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
xAnynet+ works when the AV device supporting Anynet+ is in the standby or on status.
xAnynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English 29
Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu |
Description |
View TV |
Changes Anynet+ mode to TV broadcast mode. |
Device List |
Shows the Anynet+ device list. |
(device_name) MENU |
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of |
|
the DVD recorder will appear. |
(device_name) INFO |
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the |
|
play menu of the DVD recorder will appear. |
Recording: (*recorder) |
Starts recording immediately using the recorder. (This is only available for devices that |
|
support the recording function.) |
Stop Recording: (*recorder) |
Stops recording. |
Receiver |
Sound is played through the receiver. |
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).
¦ Setting Up Anynet+
Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
The active source on the TV must be set to TV to use the Anynet+ function.
Even if an external device is still recording, it may turn off.
¦Switching between Anynet+ Devices
1.Anynet+ devices connected to the TV are listed.
If you cannot find a device you want, press the Red button to refresh the list.
2.Select a device and press the ENTEREbutton. You can switch to the selected device.
Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
xSwitching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation.
xIf you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.
¦Recording
You can make a recording of a TV Programme using a Samsung recorder.
1.Select Recording.
When there are more than two recording devices
x When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List.
When the recording device is not displayed, select Device List and press the Red button to search devices.
2.Press the EXIT button to exit.
You can record the source streams by selecting Recording: (device_name).
Pressing the (REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.
30 English
Loading...