To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again.
Return
UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.
PRESS(ENTER): The selected item will be applied.
IconsDescription
Selects to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has
been changed.
Selects by moving the JOG button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
Enable/Disable: To lock/unlock the OSD control, press the LEFT button for 10 seconds when the main menu displayed.
―
If the OSD control is locked, Brightness and Contrast can be adjusted. PIP/PBP is available.
Eye Saver Mode is available. Information can be viewed.
Selects by moving the JOG button in the function key guide screen.
Press the button when configuring settings for the PIP/PBP function is required.
Selects to turn the Monitor off by moving the JOG button in the function key guide screen.
―
Actual models because of functional variation, Function key guide options will be different.
12
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for
control source and power could be used as below.
JOG ButtonPower saving/Non-signal mode
UP
Source Change
Down
PRESS(ENTER) for 2 seconds
Power Off
When the monitor displays the Main menu the JOG Button could be used as below.
JOG ButtonAction
UP/DOWN
Move the option
LEFT
Exit the Main menu.
Close Sublist without saving value.
Value decreases in the slider.
RIGHT
Move to next depth.
Value increases in the slider.
PRESS(ENTER)
Move to next depth.
Save the value and close Sublist.
13
Changing Brightness, Contrast and Eye Saver Mode
settings
You can adjust Brightness, Contrast or Eye Saver Mode by moving the JOG button up or down, if no
OSD menu is displayed.
Eye Saver Mode
Brightness
Contrast
Off
―
The displayed image may differ depending on the model.
Eye Saver Mode
Brightness
―
This menu is not available when Smart ECO Saving is enabled.
―
This menu is not available when Eye Saver Mode is enabled.
Contrast
―
This menu is not available when
SAMSUNG
MAGIC
Bright is set to Cinema mode.
―
This menu is not available when PIP/PBP Mode is set to On and the Size is set to
(PBP Mode).
Changing the Volume setting
You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.
Volume
50
Mute
―
The displayed image may differ depending on the model.
―
If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute
the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the
input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on
the product.
―
What is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the input
signal is weak, usually due to a problem with the volume of an input device.
―
To activate the Mute function, access the Volume control screen, then use the JOG button to move the
focus down. To deactivate the Mute function, access the Volume control screen, then increase or decrease
the Volume.
14
Types of Ports
―
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
POWER IN
PortDescription
Connect the power cord for your monitor to the POWER IN port on the
back of the product.
Connects to a source device using an HDMI cable or HDMI-DVI cable.
Connects to a PC using a DP cable.
Connects to a source device using a USB Type-C cable. Compatible with
a USB cable version 3.0 or lower.
Connects to a PC using a USB cable.
―
This port can only connect to a PC.
PortDescription
Connect to a USB device. These ports are enabled when a source device
is connected to or using a USB Type-C to A cable or
a USB Type-C cable. These ports are enabled when a source device is
connected to
using a USB Type-C to A cable.
Connect to a USB device. This port is enabled when a source device is
connected to or using a USB Type-C to A cable or a USB
Type-C cable. This port is enabled when a source device is connected to
using a USB Type-C to A cable. And USB 3.0 is supported only
when a source device is connected to or using a USB
Type-C to A (3.0) cable.
Connect to an audio output device such as headphones.
Dedicated to service technicians.
15
Upgrading the Software via USB
1
Be sure to insert the USB disk into the USB port marked out with the blue box as shown in the
figure below. You can upgrade the software via USB only if either the monitor screen operates
normally or the check signal is displayed on the monitor screen.
USB
Check Signal Cable
HDMI
When the screen as shown in the following figure is displayed, press and hold the Down arrow key
for 5 seconds.
Power Off
2
When the message as shown in the following figure is displayed on the monitor, select Yes to
upgrade the software.
Do you want to update via USB?
YesNo
3
When the screen as shown in the following figure is displayed, select Yes.
Update from version 0802.0 to version 0803.0
Update now
YesNo
4
The software upgrading proceeds.
Updating product Software...
Your product will turn itself off and on again
automatically after completing update.
Update now
0%
16
Note
1
Before upgrading through USB disk, you need to format the USB disk into the FAT32 format.
2
Make sure only the BIN file for upgrade is in the USB disk.
3
For the CJ89 model, make sure each upgrade file is in the BIN formate and follow the naming
rules of CJ89 (m-J89**CGAA-****.*[4-digit number].bin), wherein ** indicates the monitor size in
inches, ****.* stands for the version number and the 4-digit number is the checksum. For example,
“m-J8949CGAA-1000.0[9A80].bin” follows the naming rules of CJ89 49'' model, and must be
copied to the root directory.
4
If you want to keep the current version or degrade to a lower version, you may change file name to
m-J89**CGAA-0000.0[4-digit number] and then perform the same operations.
5
If the No valid update files found. Please check your USB device and try again. message is
displayed, this is probably due to the following reasons.
No valid update files found.
Please check your USB device and try again.
Update now
YesNo
‒No USB disk is inserted into the USB port marked out with the blue box.
‒The USB disk format is not supported.
‒The USB disk contains no valid upgrade files. (No upgrade files exist, or the file names are
incorrect.)
6
Do not turn off the monitor. And prevent the upgrading from any interruption as far as possible. If
an interruption happens, the monitor will return to the production version.
―
Note that the production version may not be the same as the version before this upgrading if some other
upgrading has been done earlier.
17
Adjusting the Product Tilt and Height
―
The color and shape of parts may differ from what is shown. Specifications are subject to change without