01122A_ENG_for thai 3/25/03 5:12 PM Page 1
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
REMOTE CONTROL
ON-SCREEN MENUS
TELETEXT FUNCTION (depending on the model)
01122A_ENG_for thai 3/25/03 5:12 PM Page 2
Safety Instructions
ENG
The following illustrations represent the precautions to be taken when using and moving your television.
10% |
35° |
75% |
|
|
|
H |
5° |
H |
|
|
Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%).
If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
Do NOT expose the television to direct sunlight.
During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.
Do NOT expose the television to any liquids.
If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
Caution
|
|
|
|
|
|
|
|
The lightning flash and arrow head |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|||
|
|
|
CAUTION |
|
! |
|
|
within the triangle is a warning sign |
|
|
|
|
|
RISK OF ELECTRIC SHOCK |
|
|
|
|
alerting you of “dangerous voltage” |
|
|
|
|
|
|
|
|
|
inside the product. |
|
||
|
|
|
DO NOT OPEN |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The exclamation point within the |
! |
|
|
|
|
|
|
|
|
|
|||
|
|
CAUTION: TO PREVENT ELECTRICAL |
SHOCK, DO |
|
||||||
|
|
|
|
triangle is a warning sign alerting |
||||||
|
|
NOT REMOVE REAR COVER, NO USER |
SERVICEABLE |
|
|
|||||
|
|
|
|
you of important instructions |
||||||
|
|
PARTS INSIDE. REFER SERVICING TO QUALIFIED |
|
|
||||||
|
|
|
|
accompanying the product. |
||||||
|
|
SERVICE PERSONNEL. |
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WARNING: TO PREVENT DAMAGE WHICH MAY |
|
|
|
|
|||||
|
|
Mode |
System |
|
||||||
|
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS |
|
|
|
|
|||||
|
|
CB |
PAL-B/G |
|
||||||
|
APPLIANCE TO RAIN OR MOISTURE. |
|
|
|
|
|||||
|
|
|
|
|
|
|
||||
|
|
|
|
CK |
PAL-B/G, D/K, I, SECAM-B/G,D/K |
|
||||
|
|
|
|
|
|
|
|
|
||
|
The main voltage is indicated on the rear |
|
|
|
||||||
|
|
CS |
PAL-B/G, D/K, I, SECAM-B/G,D/K, I, NTSC4.43 |
|||||||
|
|
|
(NTSC3.58; option) |
|
||||||
|
|
of the TV set and the frequency is 50 or |
|
|
|
|||||
|
|
|
CW |
PAL-B/G, D/K, I, SECAM-B/G,D/K, I, L/L’, NTSC4.43 |
||||||
|
|
60Hz. |
|
|
|
|||||
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
2
01122A_ENG_for thai 3/25/03 5:12 PM Page 3
ENG
|
Contents |
|
PREPARING YOUR TELEVISION |
|
|
■ |
Safety Instructions ......................................................................................... |
2 |
■ |
Caution .......................................................................................................... |
2 |
■ |
Front Panel Controls...................................................................................... |
4 |
■ |
Using the Buttons on the Front Panel............................................................ |
4 |
■ |
Connection Panels ........................................................................................ |
5 |
■ |
Infrared Remote Control (All Functions Except Teletext) .............................. |
6 |
■ |
Infrared Remote Control (Teletext Functions) ............................................... |
7 |
■ |
Inserting the Batteries in the Remote Control................................................ |
8 |
■ |
Connecting the Aerial (or Cable Television Network).................................... |
8 |
■ |
Switching Your Television On and Off........................................................... |
9 |
■ |
Placing Your Television in Standby mode ..................................................... |
9 |
■ |
Plug & Play Feature....................................................................................... |
10 |
■ |
Choosing Your Language.............................................................................. |
11 |
SETTING UP THE CHANNELS |
|
|
■ |
Storing the Channels Automatically............................................................... |
12 |
■ |
Selecting a Channel Numbered Ten or Over ................................................ |
12 |
■ |
Storing the Channels Manually...................................................................... |
13 |
■ |
Skipping Unwanted Channels ....................................................................... |
14 |
■ |
Fine tuning Channel Reception ..................................................................... |
15 |
■ |
Sorting the Stored Channels ......................................................................... |
16 |
USING THE TELEVISION |
|
|
■ |
Changing the Picture Standard ..................................................................... |
17 |
■ |
Selecting the Picture Format ......................................................................... |
17 |
■ |
Adjusting the Picture Settings ....................................................................... |
18 |
■ |
Adjusting the Volume..................................................................................... |
19 |
■ |
Changing the Sound Standard ...................................................................... |
19 |
■ |
Adjusting the Sound Settings ........................................................................ |
20 |
■ |
Switching the Sound Off Temporarily ............................................................ |
20 |
■Extra Sound Settings
|
(Auto Volume/Melody/Pseudo Stereo/Turbo Sound) .................................... |
21 |
■ |
Selecting the Sound Mode ............................................................................ |
22 |
■ |
Selecting the Bilingual ................................................................................... |
22 |
■ |
Setting the Sleep Timer ................................................................................. |
23 |
■ |
Setting and Displaying the Current Time....................................................... |
23 |
■ |
Switching the Television On and Off Automatically ....................................... |
24 |
■ |
Activating the Child Lock ............................................................................... |
25 |
■ |
Extra Function Settings (Blue Screen/Low Noise AMP)................................ |
26 |
USING THE TELETEXT FUNCTION (depending on the model)
■ |
Teletext Decoder |
........................................................................................... |
|
27 |
■ |
Displaying Teletext .....................................................................Information |
|
27 |
|
■ |
Selecting a Specific ................................................................Teletext Page |
|
28 |
|
■ |
Using FLOF to Select ..........................................................a Teletext Page |
|
28 |
|
■ |
Storing Teletext Pages .................................................................................. |
|
29 |
|
INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE |
|
|||
■ |
Viewing Picture From ........................................................External Sources |
|
29 |
|
■ |
Connecting to the ...............................................Audio/Video Input/Outputs |
30 |
||
■ |
Automatic Degaussing .........................................to Remove Color Patches |
31 |
||
■ |
Troubleshooting: ................................Before Contacting Service Personnel |
31 |
||
Symbols |
|
|
|
|
|
Press |
Important |
Note |
|
3
01122A_ENG_for thai 3/25/03 5:12 PM Page 4
|
Front Panel Controls (depending on the model) |
ENG |
Buttons and markings are subject to change. |
|
STAND-BY INDICATOR |
|
MENU DISPLAY |
CHANNEL SELECTION |
|
VOLUME ADJUSTMENT |
REMOTE CONTROL SENSOR |
POWER |
Using the Buttons on the Front Panel
If your remote control no longer works or you have lost it, you can use the controls on the front panel of the television to:
Switch on the television when it is in Standby mode and select channels ( )
Access the main menu ( )
Adjust the volume ( )
Buttons on the front panel have the same function as corresponding buttons on the remote control.
4
01122A_ENG_for thai 3/25/03 5:12 PM Page 5
Connection Panels
The actual configuration on your TV may be different, depending on |
ENG |
your model. |
|
Front of TV
EARPHONE JACK |
RCA AUDIO/VIDEO INPUT CONNECTORS |
|
RCA AUDIO/VIDEO
INPUT CONNECTORS
HEADPHONE JACK
Connecting earphones/headphones
You can connect a set of earphones/headphones to your television if you wish to watch a television programme without disturbing the other people in the room.
Prolonged use of earphones/headphones at a high volume may damage your hearing.
Rear of TV
75 Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK
|
OUTPUT |
|
OUTPUT |
VIDEO |
AUDIO |
VIDEO |
AUDIO |
|
INPUT |
|
INPUT |
SCART AUDIO/VIDEO |
RCA AUDIO/VIDEO |
INPUT/OUTPUT CONNECTOR |
INPUT/OUTPUT CONNECTORS |
5
01122A_ENG_for thai 3/25/03 5:12 PM Page 6
Infrared Remote Control (All Functions Except Teletext)
ENG |
Buttons and markings are subject to change. |
|
POWER
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT CHANNEL SELECTION
SOUND MENU DISPLAY (OPTION)
TURBO SOUND ON/OFF (OPTION)
TEMPORARY SOUND SWITCHOFF
TUNER/CABLE NETWORK
SELECTION
EXTERNAL INPUT SELECTION
ON-SCREEN DISPLAY
SOUND MODE SELECTION (OPTION)
AUTOMATIC SWITCH-OFF SOUND STANDARD (OPTION)
PICTURE STANDARD (OPTION)
PICTURE SIZE
NEXT CHANNEL
VOLUME DECREASE |
VOLUME INCREASE |
|
PREVIOUS CHANNEL
MENU DISPLAY
Operation of remote control may be affected by bright artificial light near to the TV set.
6
01122A_ENG_for thai 3/25/03 5:12 PM Page 7
Infrared Remote Control (Teletext Functions)
|
Buttons and markings are subject to change. |
|
ENG |
TELETEXT DISPLAY/MIX
|
LIST/FLOF MODE SELECTION |
? |
TELETEXT REVEAL |
TELETEXT HOLD |
TELETEXT STORE |
|
TELETEXT SUB-PAGE |
FASTEXT TOPIC SELECTION
PICTURE SIZE
TELETEXT NEXT PAGE
1
1
TELETEXT PREVIOUS PAGE
PROGRAMME SELECTION BY NAME
7
01122A_ENG_for thai 3/25/03 5:12 PM Page 8
Inserting the Batteries in the Remote Control
ENG
|
|
S |
|
S |
|
E |
|
|
R |
|
|
P |
|
|
You must insert or replace the batteries in the remote control when you :
Purchase the television.
Find that the remote control is no longer operating correctly.
1Remove the cover of the remote control by pressing the symbol ( PRESS ) and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
+ on the battery with + on the remote control- on the battery with - on the remote control
3 Replace the cover by pushing it in the direction of the arrow.
|
|
S |
|
S |
|
E |
|
|
R |
|
|
P |
|
|
Connecting the Aerial (or Cable Television Network)
75Ω
Rear of TV
To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial
A cable television network
Plug the aerial or cable network input cable to the 75Ω coaxial socket on the rear of the television.
Cable
Television
Network
8
01122A_ENG_for thai 3/25/03 5:12 PM Page 9
Switching Your Television On and Off
ENG
The mains lead is attached to the rear of the television.
If you have purchased this television in the United Kingdom, refer to rear cover for further instructions on plug wiring.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.
2Press the “ ” (ON/OFF) button on the front of the television. Result: The Standby indicator lights up on the front panel.
3Press the POWER button on the remote control to switch the television on.
Result: The programme that you were watching last is reselected automatically.
4To switch your television off, press the “ ” (ON/OFF) button again on the front of the television.
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
Power consumption
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you turn it on.
1Press the POWER button on the remote control.
Result: The screen is turned off and the Standby indicator on the front of the television lights up.
2To switch the screen back on, simply press the POWER button again on the remote control.
Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely.
9
01122A_ENG_for thai 3/25/03 5:12 PM Page 10
Plug & Play Feature
ENG
When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.
Plug & Play
Ant. Input Check
Auto Store |
Exit |
P 1 |
|
|
471 |
MHz |
48 % |
Exit |
|
|
|
Time |
|
|
Clock |
11 : 35 |
Move |
Exit |
Enjoy Your Watching...
|
|
|
|
Function |
|
|
Language : English |
||
|
|
|||
|
|
Time |
|
|
|
|
Plug & Play |
|
|
|
|
Blue Screen |
: Off |
|
|
|
Child Lock |
|
|
|
|
Low Noise AMP |
: Off |
|
|
|
|
|
|
1If the television is in Standby mode (red light visible on the television front panel), press the POWER button on the remote control.
Result: The message “Plug & Play” is displayed. It flickers for a little while and then the “Language” menu is automatically displayed.
2Press the ▲ or ▼ button to select required language. Press the MENU button to enter the language, and then the message “Ant. Input Check” is displayed.
If any language is not selected on the “Language” menu, the “Language” menu will be displayed about 30 seconds later.
3Make sure that the antenna is connected to the TV. And then press the + or – button to store the channels (refer to “Storing the Channels Automatically” on page 12).
Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range.
4When searching and storing is complete, the “Time” menu is displayed.
5Press the + or – button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button (refer to “Setting and Displaying the Current Time” on page 23).
6When you have finished, press the MENU button.
Result: The message “Enjoy Your Watching” is displayed, and then the channel which has been stored will be activated.
7If you want to reset this feature...
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Function”, and then press the + or – button.
3Select the “Plug & Play” by pressing the ▲ or ▼ button, and then press the + or – button.
Result: The message “Plug & Play” is displayed.
Select |
Enter |
Exit |
10