Radio Shack PRO-197 User Manual

PRO-106/PRO-197

RadioShack is pleased to offer this free upgrade to enhance the functionality and
performance of your PRO-106/PRO-197 (20-106/20-197) Radio Scanner. Please take a
moment to review these instructions before proceeding with the upgrade.

IMPORTANT NOTICE: You must upgrade your RadioShack scanner with a firmware
upgrade obtained from RadioShack. Please note that firmware upgrades for
RadioShack scanners are not compatible with scanning receivers sold by other
manufacturers.

CPU 1.7 Firmware Upgrade

New in this version

CPU firmware version 1.7 provides the following enhancement to your 20-106/20-197
Radio Scanner:

New features:

• Change S-E GLOB "138-174 5kHz:" item to "Bandplan:" with a choice between
USA and Canada

• Change step size to 12.500kHz in 405.987500-512.000000MHz range when the
“Bandplan: Canada” option is selected in the FUNC-GLOB menu.

• Change step size from 12.500kHz to 6.250kHz between 470.000000MHz and

512.000000MHz to handle the new UHF bandplan

Fixes / Enhancements:

• Further qualify EDACS "Individual" call grants to address a problem where the
radio sometimes tunes to MDT transmissions as radio-to-radio calls.

• Fixed EDACS "channel number" in CCDump messages.

Other:

• New DSP Boot code V1.1 to handle a different Flash IC version. There is no
user-noticeable performance change.

What you will need to upgrade your radio scanner

You will need the following items to perform the firmware upgrade:

• The upgrade package file is available as a self-extracting ZIP file on the Product
Support Page for the PRO-106 or PRO-197 at www.RadioShack.com. The
upgrade package contains the executable file: CPU106197BootF12_U17.exe.

• A RadioShack USB scanner programming cable, Catalog #20-047

1

PRO-106/PRO-197

CPU 1.7 Firmware Upgrade

• A personal computer running one of the following Windows operating systems:
Windows 98SE, Windows ME, Windows 2000, Windows XP, Windows 2003
Server (standard or x64), Windows Vista (standard or x64).

o Depending on which version of Windows you are running, you may have to

right click the file, select Properties, and click the UNBLOCK button.

• Your scanner should be at DSP version 1.2 or higher before installing this
upgrade to CPU version 1.7. Some features may not work properly if an earlier
DSP version is used.

o To check which firmware is installed, power on the scanner and press the

3 key during the welcome message. The CPU version is indicated on the
line “uP App(l) Ver,” and the DSP version is indicated on the line “DSP
App Ver.”

o There is no difference between the “F” and “U” versions of the firmware

(for example “Ver:RF1.7” and “Ver:RU1.7” are identical). The “F” and “U”
indicate where the firmware was loaded into the radio, at the Factory or a
customer Upgrade.

Upgrading your 20-106 or 20-197

Upgrading your scanner is a quick, simple, and safe process. If an error in loading the
CPU firmware occurs, the radio is designed to automatically recover and then force a
new CPU load without having to press the PGM/PROG key. If an error in loading the
DSP firmware occurs, the radio is designed to restore the previous DSP firmware
automatically.

Before upgrading

Prepare for the upgrade by completing the following:

1. Download the 20-106/20-197 firmware upgrade package.

2. Install the drivers for the RadioShack Catalog #20-047 USB cable on your personal
computer.

3. Connect the USB cable to an available USB port on your personal computer.

4. Know the COM port number that Windows has assigned to the USB cable. You can
find the COM port number from Device Manager in Control Panel.

5. Use fresh batteries or an AC adapter to power your scanner.

Step by step upgrade procedure

1. Double click on the CPU106197BootF12_U17.exe file to start the upgrade process.

2. Follow the on-screen instructions exactly. Carefully read the instructions presented
within each step before proceeding to the next step of the upgrade process.

2