PANJIT SB520, SB5100, SB530, SB550, SB540 Datasheet

SB520 THRU SB5100

HIGH CURRENT SCHOTTKY BARRIER RECTIFIERS

VOLTAGE - 20 to 100 Volts CURRENT - 5.0 Amperes

FEATURES

•Low cost

•	Plastic package has Underwriters Laboratory	DO-201AD
	Flammability Classification 94V-O utilizing

•Metal to silicon rectifier, Majority carrier conduction

•Low power loss, high efficiency

•High current capability, Low VF

•High surge capacity

•Epitaxial construction

•For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications

•High temperature soldering guaranteed: 250 ¢J /10

seconds/.375”(9.5mm) lead lengths at 5 lbs., (2.3kg) tension

MECHANICAL DATA

Case: Molded plastic, DO-201AD

Terminals: Axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Color band denotes cathode

Mounting Position: Any

Weight: 0.04 ounce, 1.12 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Resistive or inductive load.

For capacitive load, derate current by 20%.

	SB520	SB530	SB540		SB550		SB560		SB580	SB5100	UNITS
Maximum Recurrent Peak Reverse Voltage	20	30	40		50		60	80		100	V
Maximum RMS Voltage	14	21	28		35		42	56		80	V
Maximum DC Blocking Voltage	20	30	40		50		60	80		100	V
Maximum Average Forward Rectified					5.0						A
Current, .375”(9.5mm) Lead Length(Fig. 1)
Peak Forward Surge Current, 8.3ms single					150						A
half sine wave superimposed on rated
load(JEDEC method)
Maximum Instantaneous Forward Voltage		0.55			0.70				0.85		V
at 5.0A
Maximum DC Reverse Current TA=25 ¢J					0.5						mA
Reverse Voltage TA=100 ¢J					50.0
Typical Thermal Resistance (Note 1) R £KJL		15						10			¢J /W
Typical Junction capacitance (Note 2)		500						380			PF
Operating and Storage Temperature Range			-50 TO +125								¢J
TJ,TSTG
NOTES:

1.Thermal Resistance Junction to Lead Vertical PC Board Mounting .375(9.5mm) Lead Lengths

2.Measured at 1 MHz and applied reverse voltage of 4.0 Volts