PANJIT SB1620DC, SB16100DC, SB1640DC, SB1630DC, SB1660DC Datasheet

SB1620DC THRU SB16100DC

D2PAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

VOLTAGE - 20 to 100 Volts CURRENT - 16.0 Amperes

FEATURES

• Plastic package has Underwriters Laboratory

D2PAK/TO-263

Flammability Classification 94V-O utilizing

Flame Retardant Epoxy Molding Compound

•Exceeds environmental standards of MIL-S-19500/228

•Low power loss, high efficiency

•Low forward voltage, high current capability

•High surge capacity

•For use in low voltage, high frequency inverters

free wheeling, and polarlity protection applications

MECHANICAL DATA

Case: D2PAK/TO-263 molded plastic

Terminals: Leads, solderable per MIL-STD-202, Method 208

Polarity: As marked

Mounting Position: Any

Weight: 0.06 ounce, 1.7 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Single phase, half wave, 60Hz, Resistive or inductive load.

For capacitive load, derate current by 20%.

	SB1620	SB1630	SB1640		SB1650		SB1660	SB1680	SB16100	UNITS
	DC	DC	DC		DC		DC	DC	DC
Maximum Recurrent Peak Reverse Voltage	20	30	40		50		60	80	100	V
Maximum RMS Voltage	14	21	26		35		42	56	80	V
Maximum DC Blocking Voltage	20	30	40		50		60	80	100	V
Maximum Average Forward Rectified				16						A
Current at TC=90 ¢J
Peak Forward Surge Current,				150						A
8.3ms single half sine-wave superimposed
on rated load(JEDEC method)
Maximum Forward Voltage at 8.0A per		0.55			0.75			0.85		V
element
Maximum DC Reverse Current at TC=25 ¢J				0.5						mA
DC Blocking Voltage per element TC=100 ¢J				100
Typical Thermal Resistance(Note) R £KJA				60						¢J /W
Operating and Storage Temperature Range				-50 to +150						¢J

NOTES:

Thermal Resistance Junction to Ambient.