PANJIT ES1B, ES1D, ES1C, ES1E, ES1J Datasheet

ES1A THRU ES1J

SURFACE MOUNT SUPERFAST RECTIFIER

	VOLTAGE - 50 to 600 Volts	CURRENT - 1.0 Ampere
FEATURES
•	For surface mounted applications	SMA/DO-214AC
•	Low profile package
• Built-in strain relief
• Easy pick and place
• Superfast recovery times for high efficiency
• Plastic package has Underwriters Laboratory
	Flammability Classification 94V-O
•	Glass passivated junction
•	High temperature soldering:
	260 ¢J /10 seconds at terminals

MECHANICAL DATA

Case: JEDEC DO-214AC molded plastic

Terminals: Solder plated, solderable per

MIL-STD-750, Method 2026

Polarity: Indicated by cathode band

Standard packaging: 12mm tape (EIA-481)

Weight: 0.002 ounce, 0.064 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Single phase, half wave 60Hz resistive or inductive load.

For capacitive load, derate current by 20%.

SYMBOLS ES1A ES1B ES1C ES1D ES1E ES1G ES1J UNITS

Maximum Recurrent Peak Reverse Voltage	VRRM	50	100	150	200	300	400	600	Volts
Maximum RMS Voltage	VRMS	35	70	105	140	210	280	420	Volts
Maximum DC Blocking Voltage	VDC	50	100	150	200	300	400	600	Volts
Maximum Average Forward Rectified Current,	I(AV)				1.0				Amps
at TL=120 ¢J
Peak Forward Surge Current 8.3ms single half sine-	IFSM				30.0				Amps
wave superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A	VF		0.95			1.25		1.7	Volts
Maximum DC Reverse Current TA=25 ¢J	IR				5.0				£g A
At Rated DC Blocking Voltage TA=100 ¢J					100
Maximum Reverse Recovery Time (Note 1)	TRR				35.0				nS
Typical Junction capacitance (Note 2)	CJ				10.0				PF
Typical Thermal Resistance (Note 3)	R £KJL				35				¢J /W
Operating and Storage Temperature Range	TJ,TSTG			-50 to +150					¢J

NOTES:

1.Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A

2.Measured at 1 MHz and Applied reverse voltage of 4.0 volts

3.8.0mm2 (.013mm thick) land areas