PANJIT ER504, ER503, ER502, ER506, ER501A Datasheet

ER500 THRU ER506

SUPERFAST RECOVERY RECTIFIERS

VOLTAGE - 50 to 600 Volts	CURRENT - 5.0 Amperes
FEATURES	DO-201AD

•Superfast recovery times-epitaxial construction

•Low forward voltage, high current capability

•Exceeds environmental standards of MIL-S-19500/228

•Hermetically sealed

•Low leakage

•High surge capability

•Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound

MECHANICAL DATA

Case: Molded plastic, DO-201AD

Terminals: Axial leads, solderable to MIL-STD-202,

Method 208

Polarity: Color Band denotes cathode end

Mounting Position: Any

Weight: 0.04 ounce, 1.12 grams

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.

	ER500	ER501	ER501A		ER502		ER503	ER504	ER506	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	150		200		300	400	600	V
Maximum RMS Voltage	35	70	105		140		210	320	420	V
Maximum DC Blocking Voltage	50	100	150		200		300	400	600	V
Maximum Average Forward				5.0						A
Current .375"(9.5mm) lead length
at TA=55 ¢J
Peak Forward Surge Current, IFM (surge):				150.0						A
8.3ms single half sine-wave superimposed
on rated load(JEDEC method)
Maximum Forward Voltage at 5.0A DC		.95					1.25		1.7	V
Maximum DC Reverse Current				5.0						£g A
at Rated DC Blocking Voltage
Maximum DC Reverse Current at				300						£g A
Rated DC Blocking Voltage TA=125 ¢J
Maximum Reverse Recovery Time(Note 1)				35.0						ns
Typical Junction capacitance (Note 2)				45						PF
Typical Junction Resistance(Note 3) R £KJA				25.0						¢J /W
Operating and Storage Temperature Range TJ				-55 to +150						¢J

NOTES:

1.Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A

2.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

3.Thermal resistance from junction to ambient and from junction to lead length 0.375”(9.5mm) P.C.B. mounted