Panasonic TH42PA40E, TH-37PA50EY, TH-42PA50E, TH37PA40E, TH-42PA50EY User Manual

1 2 3

4 5 6

7 8 9

C0

Operating Instructions

Progressive Wide Plasma Television

Model No. TH-37PA50E

TH-42PA50E

TH-37PA40E

TH-42PA40E

The illustration shown is an image.

Pedestal stand shown above is optional extra.

Please read these instructions before operating your set and retain them for future reference.

English

TQB0E0167U-2

Welcome

Dear Panasonic Customer,

We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this Plasma TV offers.

Contents

Important Safety Notice..............................................	3	Tuning menu – Auto setup........................................	18
Safety Precautions .....................................................	4	Tuning menu – Manual tuning ..................................	19
Maintenance...............................................................	5	Manual tuning (via front panel)................................	19
Accessories ................................................................	6	Q-Link.......................................................................	20
Fitting remote control batteries...................................	6	Aspect Controls ........................................................	21
AC cord connection ....................................................	7	VCR / DVD operation ...............................................	23
Cable binding instructions ..........................................	7	Teletext operation .....................................................	24
Quick Start Guide .......................................................	8	Still............................................................................	26
Basic controls: front panel and remote control .........	10	Audio / Video connections ........................................	27
Using the On Screen Displays .................................	11	How to connect the Audio Output terminals .........	28
Picture menu ............................................................	12	How to connect the AV1 / 2 / 3 Scart terminals .....	28
Sound menu .............................................................	13	How to connect the Component Input terminals ...	28
Setup menu ..............................................................	14	Troubleshooting........................................................	29
Tuning menu – overview ..........................................	15	Scart terminal information ........................................	30
Tuning menu – Programme edit ...............................	16	Specifications ...........................................................	31
Adding / deleting a programme channel................	16
Moving a programme channel...............................	16
Tuning a programme channel................................	16
Renaming a programme channel ..........................	17
Locking a programme channel ..............................	17
Changing the sound system for a channel ............	17
Copying programme information to
a recording device ........................................	17

2

Important Safety Notice

WARNING

1)To prevent damage which may result in fire or shock hazard, do not expose this appliance to dripping or splashing.

Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.)

2)To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

3)Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the earthing plug.

CAUTION

1)This appliance is intended for use in environments which are relatively free of electromagnetic fields.

Using this appliance near sources of strong electromagnetic fields or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear. To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic fields.

2)If a static electricity discharge occurs inside the front cover, the screen may momentarily flicker. This is not a malfunction.

The screen will return to normality in a short while.

To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

Trademark Credits

•VGA is a trademark of International Business Machines Corporation.

•Macintosh is a registered trademark of Apple Computer, USA.

•S-VGA is a registered trademark of the Video Electronics Standard Association.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

CAUTION:

	Symptoms		Check
			Do not allow a still picture to be displayed for an extended period, as this can cause a
			permanent after-image to remain on the Plasma TV.
			Examples of still pictures include logos, video games, computer images, teletext and
After-images appear			images displayed in 4:3 mode.
			With no signal present, and without any user operation, the Panasonic screensaver will
	ABCDEF		appear automatically after a few minutes to prevent image retention.

Note:

The permanent after-image on the Plasma TV resulting from fixed image use is not an operating defect and as such is not covered by the Warranty.

This product is not designed to display fixed images for extended periods of time.

3

Safety Precautions

WARNING

Setup

This Plasma TV is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)

•Pedestal ............................................ TY-ST42PA50W, TY-ST42PX5W

•Display stand ....................................TY-S37PA50W (TH-37PA50E, TH-37PA40E),

TY-S42PA50W (TH-42PA50E, TH-42PA40E)

•Wall-hanging bracket (vertical)..........TY-WK42PV3W, TY-WK42PV2W

•Wall-hanging bracket (angle) ............ TY-WK42PR2W

Always be sure to ask a qualified technician to carry out set-up.

Do not place the Plasma TV on sloped or unstable surfaces.

• The Plasma TV may fall off or tip over.

Do not place any objects on top of the Plasma TV.

•If water is spilt onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV, please consult your local Panasonic dealer.

Ventilation should not be impleded by covering the ventilation openings with items such as newspapers, table cloths and curtains.

If using the pedestal (optional accessory), leave a space of at least 10 cm at the top, left and right, at least 6 cm at the bottom, and at least 7 cm at the rear. If using some other setting-up method, leave a space of at least 10 cm at the top, bottom, left and right, and at least 1.9 cm at the rear.

Avoid installing this product near electronic equipment that is easy to receive electromagnetic waves.

• It will cause interference in image, sound, etc. In particular, keep video equipment away from this product.

Keep unneeded small parts and other objects out of the reach of small children. These objects can be accidentally swallowed. Also, be careful about packaging materials and plastic sheets.

When using the Plasma TV

The Plasma TV is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes.

• Doing so may cause the Plasma TV to overheat, which can cause fire or damage to the Plasma TV.

Do not stick any foreign objects into the Plasma TV.

•Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Plasma TV, as doing so can cause fire or electric shock.

Do not remove the cover or modify it in any way.

•High voltages which can cause severe electric shocks are present inside the Plasma TV. For any inspection, adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

Securely insert the power cord plug as far as it will go.

•If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket plate is loose, they shall not be used.

Do not handle the power cord plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.

•Do not damage the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable is damaged, have it repaired at your local Panasonic dealer.

If the Plasma TV is not going to be used for any prolonged length of time, unplug the power cord plug from the wall outlet.

4

Safety Precautions

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out from the Plasma TV, immediately unplug the power cord plug from the wall outlet.

•If you continue to use the Plasma TV in this condition, fire or electric shock could result. After checking that the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Plasma TV yourself is extremely dangerous, and should never be attempted.

If water or foreign objects get inside the Plasma TV, if the Plasma TV is dropped, or if the cabinet becomes damages, disconnect the power cord plug immediately.

•A short circuit may occur, which could cause fire. Contact your local Panasonic dealer for any repairs that need to be made.

CAUTION

When using the Plasma TV

Do not bring your hands, face or objects close to the ventilation holes of the Plasma TV.

•Heated air comes out from the ventilation holes at the top of Plasma TV will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.

Be sure to disconnect all cables before moving the Plasma TV.

•If the Plasma TV is moved while some of the cables are still connected, the cables may become damaged, and fire or electric shock could result.

Disconnect the power cord plug from the wall socket as a safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it becoming dusty.

•If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in fire.

Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.

This Plasma TV radiates infrared rays, therefore it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.

Maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

•If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

•Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

•If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

•Do not allow any detergent to come into direct contact with the surface of the Plasma TV. If water droplets get inside the unit, operating problems may result.

•Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

5

Accessories

Check that you have the accessories and items shown
Operating Instructions	Remote Control Transmitter			Mains Lead
	(EUR7651090)
		OK
	1	2	3
	4	5	6
	7	8	9
	C	0
		N
		TV
Batteries for the Remote	Clamper × 2			Pan European
Control Transmitter				Guarantee Card
(2 × R6 (UM3) size)

Fitting remote control batteries

1	2	3
	+
	-
	+
	-
	“R6 (UM3)” size
Pull and hold the hook, then	Insert batteries - note correct	Replace the cover.
open the battery cover.	polarity ( + and -).

•Make sure that the batteries are fitted the correct way round.

•Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.

•Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni-Cad) batteries.

6

Fastening band Fastening

AC cord connection

How to fix:

Fix by pushing in till a clicking sound is heard.

How to release:

Pull up while drawing the knob.

Clamp

Cable binding instructions

For using the TY-ST42PX5W

Bind all cables to the plasma television with the cable clamper.
For TH-42PA50E		For TH-37PA50E
TH-42PA40E		TH-37PA40E

Cable clamper

Bundle cable using the two cable clampers (left and right) fitted to the plasma television.

For using the TY-ST42PA50W

Attach the bands.

Insert the spigot on the two bands into the pedestal.

Band

To tighten.

Loosening

Pull off.

Keep the knob pressed.

Connect cables.

Example of “connection cable routing”

Mains Lead

Clamp

Binding strap

Band

7

Quick Start Guide

1 Connection and setting up options

Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.

SET TOP BOX

					COMPONENT
AUDIO	AUDIO				VIDEO
L	L				Y	Scart cables
					PB
R	R					(Not supplied)
AUDIO
IN					PR
	RGB	AV1	AV2	AV3	VIDEO
	VIDEO	VIDEO	S-VIDEO	RGB	S VIDEO

RF cable (Not supplied)

RF cable (Not supplied)	VCR / DVD	OR
	Recorder

Plug in aerial and connect ancillary equipment.

2	Connect the mains plug to the wall socket.

Press the [	] switch on the TV set to turn the		OK
set on.
To switch the TV set to Standby mode, press the		1	2	3
button on the remote control.		4	5	6
		7	8	9
The TV set can be switched on by pressing the		C	0
button again if it was in Standby mode.
Note:			N
This TV will still consume some power as long
as the mains plug is still inserted into the wall
socket.			TV
	Remote control signal sensor
	Power Indicator
	Standby	: Red
	On	: No Light

8

Quick Start Guide

3 Select your country.

For Belgium, Switzerland and E.Eu, select the desired language.

If you wish to perform manual tuning, press the Green button.

See page 19.

Press the Red button to start Auto Setup.

Auto setup will begin, your stations will be located and stored.

If a compatible recording device is connected to the correct Scart terminal, programme data will be downloaded to the device via Q-Link.

See page 20.

Land

Deutschland Österreich France Italia España Portugal Nederland Danmark Sverige Norge

Suomi

Green Belgien Schweiz

ELLADA Polska

Česká republika Magyarország E.Eu

Start ATP	Suchlauf		Abbruch
Red
CH12
AUTO SETUP IN PROGRESS
SEARCHING :		PLEASE WAIT
02		78:01	41
	Exit

OK

1 2 3

4 5 6

7 8 9

C 0

N

TV

4 TV to VCR or DVD Recorder Download

If a “Q-Link”, “NEXTVIEWLINK” or compatible recording device has been connected to a Scart terminal before starting Step 2, programme information will be downloaded to that device.

DOWNLOAD IN PROGRESS

PLEASE WAIT

Programme : 63

Remote control unavailable

The programme positions will be downloaded to the recording device, in the same order as stored in the TV. See page 20.

Not all VCRs / DVD Recorders support this download of programme information, some may require to be started manually.

Refer to the recording device’s operating instruction book.

If a recording device other than those described above has been connected, then there will be no download operation.

Notes:

•If the recording device has not accepted download data from the TV, you may need to select the Download option from the device’s menu system. Refer to the recording device’s operating instruction book.

•If Q-Link is not operating correctly, check the following:

The Scart cable is connected to the TV’s Scart terminal, AV2 or AV3, and correctly setup in the menu. The Scart cable is connected to the recording device’s compatible (Q-Link, NEXTVIEWLINK or similar technology) Scart terminal.

The Scart cable is a “fully wired” type.

•For further information on Q-Link and connecting equipment, see page 20, 28, 30.

9

Basic controls: front panel and remote control

On / Off switch

STR (Normalization store)

TV/AV button (see page 27)

Used to store tuning and other function settings.

Increases or decreases the programme position by

F (Function select)

one. When a function is already displayed, press to

Displays the On Screen Display functions, use repeatedly

increase or decrease the selected function. When in

to select from the available functions - Volume, Contrast,

Standby mode, switches TV On.

Brightness, Colour, Sharpness, Tint (in NTSC mode),

Bass, Treble, Balance and Tuning mode.
Standby On / Off button				Sound mute On / Off
Switches TV On or Off (Standby mode).
GUIDE button				DIRECT TV Record button
Displays the Programme table.		DIRECT TV REC		(see page 20)
Move the cursor to choose the position,				Switch between viewing TV or AV input.
then press the OK button to the viewing	GUIDE		TV/AV
screen.				(see page 27)
Menu button	OK			Cursor buttons to make selections and
Press to access the Picture, Sound and				adjustments.
Setup menus. (see page 12-14)	MENU		EXIT	Exit the mode.
Press to confirm selections and choices.
				Text Hold / Picture Still button
Coloured buttons used for the selection,	TEXT F.P.	INDEX HOLD		(see page 24, 26)
navigation and operation of various				Text Index button (see page 26)
functions.
Teletext button (see page 24-26)	1	2	3	Programme / channel change buttons (0-
	4	5	6
Text F.P. button (see page 25)				9) and Teletext page buttons.
				(see page 24-26)
Direct channel access	7	8	9	When in Standby mode, switches TV
During normal TV viewing or when				On.
in the Tuning, Programme edit or	C	0		Status button
Manual tuning menus, press and then
enter channel number using the numeric	VCR			Press to display status information for the
buttons.				current Programme position, Programme
				name, Channel number, MPX mode,
Channel up / down button				Receiving system and ASPECT mode.
ASPECT control button				Press again to remove the information.
	ASPECT			Volume up / down button
(see page 21, 22)	N
N (Normalize) button	REC	VCR	DVD	VCR / DVD buttons
Resets all settings to their default levels.	PROGRAMME			(see page 23)

TV

10